Copy Indonesian Company Code

Dear All,
We would like to copy an Indonesian company code from SAP Company Code 0001.
However, we realise that Country Version for Indonesia is not avaiable.
Thus we could not localise the SAP Company Code 0001 as an Indonesian company code.
We have 2 approaches to the above issue: -
1) We have noted that Country Template is available for Indonesia.
Thus is it feasible to copy the company code of Indonesian from the Country Template settings instead?
2) If we are handling all the taxation and withholding issues outside SAP, can we copy any Local SAP Company Code 0001 to a new company code for our Indonesian company?
We would like to seek for your expertise and advices especially for those whom have experience in implementing SAP for Indonesian companies, or having encountered similar issues when setting up company codes in SAP.
We would really appreciate your advise in this area.

hi
see below links.this may be useful to u.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c04a2261-640b-2a10-1f95-d307bfa7258c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0910e42-2911-2a10-8482-b0fd63ac79e6
nagesh

Similar Messages

  • Valuation area during copying of company code

    Hi,
    I am copying a company code from 0888, to a new company code:0999. But finished, i check, there is not a valuation area:0999 created?
    How i create the valuation area? Our valuation level is at company code.
    Thanks.

    hi,
    your valuatino area is your plant. once you create a plant your valuation area by defualt you shall have a valuation area created.
    hope this helps
    regards
    sayeed

  • Copy one company code (existing one) into several target company codes (

    All,
    is there a easy method available to copy one company code (existing one) into several target company codes (new ones). The SAP standard functionality does not support this task.
    Kind regards
    Juergen Merwa

    Hi,
    Copy company codes can be done in two ways.
    1. To copy basic data i.e, through transaction ox02
    2. To copy company code relevant parameters (global) & GL accounts through EC01.
    If your option is point 1. then the best thing i suggest is go for transaction scat and create a test case and record the transaction ox02.Then afte that download the variant and fill the necessary fields accordingly and try to upload.

  • Creation of new COPA by copying previous Company code config

    Hi Guys:
    We have copied new COPA configuration for new company code with reference to already existing company code's config.
    I could not able to see Actual Flow of values by comparing different screens between old and new config. New config is not having flow of actual's data.
    Could someone guide me with verfication procedure to see why it has not transfferred a full config to new thing.
    Please advice.
    Thanks
    Sri

    Hi
    It is not clear what you copied for COPA configuration
    Please check whether the new co code is assigned to the same controlling area as the old ones.
    S Jayaram

  • When i am copying 1000 company code i am getting error

    Hi Experts....
    when i am copying the 1000 Company code i am getting ABAP RUN TIME ERROR.
    Short text
        SQL error in the database when accessing a table.
    What can you do?
        Note which actions and input led to the error.
        For further help in handling the problem, contact your SAP administrator.
        You can use the ABAP dump analysis transaction ST22 to view and manage
        termination messages, in particular for long term reference.

    Hi,
    Please check whether the Run time error discription in ST22 (in Second Para.) you will find some hint.
    on parallel hands please try to debug the system with "/h" as soon as you start the copying you will find where system is providing the error.
    regards,
    Ninad Kshirsagar

  • Copying  new company code and G/L's-how to put in Quality server?

    Hi
    We have existing system and we are creating new company code by copying from existing company code along with G/L accounts using --Copy/edit/delete company code action.
    Once this is done in Development server how do we transport this in to Quality and production servers?
    Is basis help required or as a functional consultant I can do if so how?
    regards

    Hello,
    Through STMS you can import.
    However, there should clear segregation of duties. I would expect a basis consultant should do the imports into QA or production or a centralized team.
    Regards,
    Ravi

  • To copy a company code to a new client

    Hi,
    I want to copy the ides company 1000 and its related data and customization from client 800 to a new client 900. How can i do that?

    Hi,
    1.Create a logical system in BD54,
    2.Create a new client(900) through transaction SCC4 and assign the logical system created in STEP-1
    3.Login into the newly created client using UID: sap* and PWD: pass
    4.Create a client copy through SCCL transaction selecting the source client as 800 and selecting the desired profile for customization.
    Regards,
    Laawanya

  • Error copying company code in ECC 6.0

    Hi all,
    I encounterred the error "Enter numeric value only" aftern copying company code.
    This problem is exactly the same with Copying of Company Code
    However, I couldn't find the note Note 547875 that he mentioned in the thread.
    I also tried to create company code before copying but no help.
    Can anybody help?
    Giang

    This is what u need to do to resolve this error:
    The problem is caused by an error in Customizing.
    The TNIW5 Customizing table is a table with delivery class = C (= Maintenance only by customers - No SAP import). SAP has delivered entries in the TNIW5 table from earlier releases in the incorrect format (entries with the field contents '12') for the TNIW5-REICHWEITE field.
    Solution
    Use Transaction SE16 to delete all entries in the TNIW5 table that have the two-digit contents '12' in the 'Range of coverage' field.
    If you want to use the lowest value determination by range of coverage (Transaction MRN1) with valuation level = company code, you can maintain your own customer-specific Customizing entries in Transaction OMW5.
    Header Data

  • Copy Master Datas in FICo from 1 Company Code to Another   ---  Very Urgent

    Hi Peers
    I want to copy all the FI & CO master Data like G/L a/cs , Vendor Master, Customer Master, Cost Centers, Cost Elements, Commitment Items, Funds Center & Assets from one company code to another company code. Both the company codes will have same Chart of accounts. Is there any t.Code by which i can just extend these masters to my company code. Plz help. its very Urgent.
    Expecting a reply ASAP.
    Regards
    Rajaram

    Hi
    In customization,  Assign Chart of A/cs to company code there u will get the path for copying one company code to another company GL Masters.
    And also the CCtrs u already assign to the first company code.  Once u copy the data for one company to another automatically it will copy to another company code.
    Hope this is useful to u.
    Shammi

  • Error in Copying Company COde

    Hello All,
    Through SPRO, when I am trying to copy company code 0001 to 9999 (with currency USD), I am getting following error
    ""Enter numeric values only
    The value "12 " was entered in the field "REICHWEITE".
    This is not possible because it is a numeric field where only numbers may be entered.
    The length of the field is 000003.""""
    Does anyone has idea about this error. I have debugged a lot but not reaching to any solution

    you can check following OSS note..547875
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=547875]
    Extract of the NOte..
    Symptom
    When you use Transaction EC01 to delete or copy a company code delivered by SAP, the system issues error message TK455.
    Reason and Prerequisites
    The problem is caused by an error in Customizing.
    The TNIW5 Customizing table is a table with delivery class = C (= Maintenance only by customers - No SAP import). SAP has delivered entries in the TNIW5 table from earlier releases in the incorrect format (entries with the field contents '12') for the TNIW5-REICHWEITE field.
    Solution
    Use Transaction SE16 to delete all entries in the TNIW5 table that have the two-digit contents '12' in the 'Range of coverage' field.
    If you want to use the lowest value determination by range of coverage (Transaction MRN1) with valuation level = company code, you can maintain your own customer-specific Customizing entries in Transaction OMW5.

  • Copy company code with GL account

    Hi,
    In development system, i copy a company code, also the GL account, but the GL account is development is not complete, when i transfer the TR to Q and P, what Tcode i should use to copy Poduction chart of account from scource company code to target company code again?
    Thanks

    Hi,
        You can use OBR2 to delete the G/L Accounts assigned to the company code from copying.
        Then use FS15 to copy from source CoCode to your target.
    Kind regards

  • Copy company code data  into another company code

    Hi SAP gurus,
    We are working on one rollout project. So our Functional consultants are copying The company code 7301 data into 7501 by using SPRO. But at the end It is giving following Error Message because of one Y-table .
    Message no. TK 092                                                                               
    Diagnosis                                                                               
    The object R3TR TABU YFI_CONT_NATURE is flagged as a Current setting,
         which means that it is not controlled by the Transport Organizer.                                                                               
    However, the attributes of object R3TR TABU TCK33 mean that it is    
         controlled by the Transport Organizer.                                                                               
    Any objects that you want to edit together in a single step must eithe
         all be controlled by the Transport Organizer, or none of them can be  controlled by the Transport organizer.                                                                               
    System Response                                                                               
    The funtion terminates.                                                                               
    Procedure                                                                               
    Edit the objects separately.             
              could you help what is the exact problem whether is there any issue with basis.
    Your help will be rewarded
    thanks
    Madhukar

    hi,
    please check the "delivery class" of your customer table! (F1) in transaction SE11
    [http://help.sap.com/saphelp_nw70/helpdata/de/6c/f2934259a5c66ae10000000a155106/frameset.htm]

  • How to reassign new chart of accounts to company code

    I created company code, assigned fiscal year K4 to 4040 co. code. Later on I created Open/Close Posting period/Assign Company code to Fiscal Year. I prepared new chart of accounts 4040 for Canadian company.
    When I tried to assign 4040 chart of accounts to my company code in Fin Actg Global Settings, I notcied that automaticlly CACA (Chart of accounts Canada was already assigned. I tried to replac CACA by 4040 But error message "Reset company code data before changing the chart of accounts"
    I tried to delete G/L accounts Tnasaction code OBR1 & OBR2 But nothing changed.
    I wish to assignment of chart of accounts in company code in Global settings & wish to re-assign different chart of accounts. I have not created any assignment of company code to controlling area, plant, sales organization, etcu2026 While removing this it says Reset company code data before changing the chart of accounts. Screenshot is attached.
    1)       When I am trying to remove assignment of K4 fiscal year to company code it does not allow me. SO how to solve this problem.
    Should I delete company code & then retry the same?
    Please suggest how to reassign chart of accounts to company code as no data like customer, vendor or sales transaction is made.
    Pl advise solution THANKS

    Hi Paul,
    Thanks for the answer. I have not copy any company code to my co. code 4040. Just as new entry I created 4040 company code. In Org object Check everything about table found OK. No seprate G/L A/C is created by me for co. code 4040
    To see if company code is productive means Active? In "Enter Global Parameter? Tab-->Cost of Sales Accounting ACTV is 2. When I tried to make it Inactive (Blank), it is not allowing me and showing error msg as below.
    You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
    I checked this but asking for Application Area to put & I do not know hwat area I should put.
    Am I going right as suggested by you?
    I had deleted G/L accounts earlier but Sales Actg is active so sould not go ahead.
    As per Venkat I had decided to delete company code, But I want to solve without deletion.
    I am SD guy so asking many Qs of FICO as I am learning now.
    Thanks
    Reason why you are not able to delete the assignment is that, you have already created GL accounts for the COA. I hope you have not done any posting using those GL accounts.
    First of all please make that you company code is not set as productive. if set prodictive you will not be able to delete any master data. So please remove the productive check(if any).
    Then you try to delete the GL account that you have created for the COA. once you delete the GL account the system might ask for the deletion of the account group. After that you should be able to change the assignment.

  • Company code creation issue

    Hi All,
    When I am creating company code I am getting an error as below.
    "you may not change the currency since documents exist with this currency"
    Above issue is coming while new co code creation or copying of existing co code also.
    Please advice on the above issue.
    Regards,
    Riyaz

    Hi,
    I hope you are creating new company code by copying from the exiting company code. If you copy one company code to another company code then you will get few pop- up message like do you want to use same chart of account or do you want to use same currecny like that. So may be you have selected different currecny. Sap has come up with country template for each country. So you can use country template to create the new company code.
    Thanks & Regards
    R.K

  • Company code in Spain

    Hi
    I am going to create a Spanish company code on SAP and I have an SAP document from 2001 that advises on Spain which helps with the legal requirements,  however I wondered if anyone could tell me if there is a later version of this PDF or any other information specifically in relation to legal requirements for Spain.   I don't want to use the country template to copy the company code,  I would rather use an existing company code to ensure I get all the other relevant settings.     I know I will need to create a country specific chart of accounts for this company code,  however I wondered anyone had any ideas about finiding more up to date documentation.
    thanks

    Hello,
    Please review the SAP Note 1121819 (https://service.sap.com/sap/support/notes/1121819) for more information on the Legal requirements of Spanish Accountancy. I hope this helps.
    Thanks and regards,
    Suresh Jayanthi.

Maybe you are looking for