Copy SO without Sales Organization field

Hi All Expert,
I want to copy an Order from one sales organization to another, please tell me how to config the copy control.
There are so many routine can be used in the VTAA.
Thanks.
Terry

Hi Kalyan,
I hv tried create a "Copying requirements" routine to replace the original 001 (Same customer)
Under the ABAP code and replace the HVBAK-VKORG to BLANK.
But the error message still talking I'ven't assign the Sales Order type to the OLD sales organization.
However my requirment is to copy the CONTENT of the SO to another sales order type with different sales organization.
Please give me suggestion on Routine.
or I need to modifiy the DATA transfer routine instead?
There are 3 DataT (Data transfer routine) in the left side, and one Copying requirement at the right side.
Terry

Similar Messages

  • Set mandatory Sales Organization field in VF04 transaction

    Dear All,
    How set mandatory Sales Organization field in VF04 transaction.
    Regards'
    Kumar

    Can't check second part (new transaction run with a variant) as per constrains in my system. Running a new tcode with a variant worked for me in the past.
    Unfortunately it doesn't work here in VF04. Even if we create new transaction with VF04's program system doesn't allow to enter our customized variant. It only allows one standard variant and we cant make changes in that standard variant. After checking all these possibilities I suggested to go for ABAP
    PS: This logic worked for me in past in other transactions but VF04's behaviour is quit different.
    Thank$

  • Where can i get   SALES  ORGANIZATION    FIELD and TABLE

    Can anybody tell me   where can i get   FIELD  and   TABLE  Name   OF  " sales organization    "

    Dear Sandeep,
    u will find VKORG is the Sales Organisation .
    u will find this Field in every related SD Module Table...
    Like ...VBAP,BKPF ..etc..
    Hope it helps...!!!
    Pls reward if Helpful...!!!

  • How to apply a Copy Control to a unique Sales Organization?

    Hi,
    I want to know If the Copy Control can be applied only to a unique Sales Organization.
    Its possible by modifying the data transfer routine,
    and add the validation IF SO = X then... ?
    Regards.

    Yes if you have multiple sales organisation and for some cases, you want to have control only to a particular sales organisation, then you can implement the control via the routine assigned.  But unless we know exactly what exact the control is, it is difficult to propose where you need to assign that routine.
    thanks
    G. Lakshmipathi

  • "You cannot respond to a meeting without an organizer. You must add an organizer field to the item."

    I'm working on resolving an issue for a user that needs to reschedule appointments in 3 Conference Rooms when needed.
    The user will open the meeting request and hit 'decline' and then attempt to edit the response before sending it back but then the appointment closes and the following message appears:
    "You cannot respond to a meeting without an organizer. You must add an organizer field to the item. "
    -End User has Full Mailbox Access
    -Listed as a 'Owner' of the Calendar
    -Delegate Rights granted to the Calendar as well
    -Not in Cached Mode
    Check Office updates and Office is up to date on patches.
    User does not have a blackberry device.
    Not sure of what else to do...I have researched this topic and all the items I have tried have not worked.
    The Test Meeting I created to reproduce the errors was done through Outlook and adding the conference room as a resource and the user getting the errors as someone required.
    I changed the calendar view to "Active Appointments". Right click on the column headings to add a field. In the field choser, pick All appt fields. Scroll down and drag n drop the Organizer field on the fieldbar.
    The Organizer (From Field) is showing the end users who scheduled the meetings.
    My Test Meeting Request that I had scheduled for last week that re-produced the error message was moved to today.
    It is showing me as the Organizer.
    Had the user who manages the Resource try again to cancel or edit the meeting and again receive the same message.

    Hi,
    I suggest you check related meeting in Calendar folder by using MFCMapi:
    Note: The meeting should be added to Calendar folder as tentatively accepted if you open the meeting request (but takes no action) or sniffer processes the meeting request.
    1. Download MFCMapi tool from here:
    http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=55fdffd7-1878-4637-9808-1e21abb3ae37
    2. Configure Outlook Profile (Online Mode) for the Conference Rooms
    3. Logon the Mailbox of the Conference Room by using credential of the End User.
    4. Open the Calendar Folder, locate the problem Meeting
    5. Right click the meeting entry and click Disable Recipient Table
    6. You should be able to get both the organizer and the attendees
    7. In addition, the PR_Recipient_Flags of the organizer should be 3 while the attendees are 1
    Mike

  • Sales Order - Pick remarks copy to Production Order remarks field

    Hi All
    I need help with the query to copy sales order - pick remarks to Production Order when the Sales Order is linked with the production order.
    Thanks
    Bongani Dlamini

    Hi All
    I still need some help with this issue.
    Here's the scenario:-
    When a user captures a Sales Order , (s)he must enter remarks in the Logistics Tab --> Pick and Pack Remarks ( to be renamed to Production Remarks).
    This info must be copied when a production manager or supervisor creates a production order and links it to the Sales Order field on the header .
    Tried a couple or tricks but still nothing.
    SELECT $[ORDR.PickRmark]
    SELECT T1.[PickRmrk] FROM OWOR T0 , ORDR T1 WHERE T1.[DocNum] =  T0.[OriginNum]
    SELECT $[ORDR.PickRmrk]
    Please help.
    Thanks
    Bongani Dlamini

  • Copy Customer in different Sales Organization

    Hi,
    we have a company code and we create another Company Code and another Sales Organization in the same machine. For that, there are a lot of customers that will begin to work with the new Company. We find a report RFBIDE10, Transfer Customer Master Data from Source Company Code: Send; to transfer customer from old company to new, with a B_I. We are looking for the same program to create customer in the new Sales Organization, could you help us ? Do you know is exist a BAPI to do this or a program ? Any idea to do this, of course we could make an ABAP program, but we want a Std. Solution, if it's possible
    Thaks in advanced,
    Carlos.

    Hi,
    We make a customer development.
    Thanks.

  • When defining copy rules, only one source field allowed

    Our users have requested the facility to allow them to copy pricing condition records when in in VK12 transaction. But when configuring the copy rules, we have come across the following problem:
    When configuring copying rules for copying pricing condition records,
    there is no possibility to use more than one source/target fields.
    In our example, the condition table created for a certain pricing
    access sequence contains keys such as Sales Organization, Sold-to Party
    "and" Product Hierarchies level 1 to level 9 (e.g. PH1 - PH9) .
    In the condition table definition, fields PH1 to PH9, although key
    fields, are also defined as footer fields. This means that per sales
    organization and sold-to party, we can create more than one condition
    record based on different combinations of PH1 to PH9.
    However when setting up copy rules for conditions in SPRO (SD -
    Pricing Control - Copy Control for Conditions) to allow our users to copy the condition records, for a given Source /
    Target table, the standard selection screen only allows us to define one Source / Target field.
    In our case, this is not helpful. The configurator should be allowed
    to select more than one source field (i.e. PH1 and PH2 and ..... PH9). At this moment,
    we can only select as source field PH1 or PH2 or PH3., etc..
    Steps for the Reconstruction:
    - Run Spro.
    - Select SD --> Pricing --> Pricing control --> Copy control for conditions -- > Copying rule for conditions
    - Select 'New Entries'. Selection screen is displayed. The issue is that in this selection screen, the configurator is allowed to select only one source field. He should be allowed to select multiple fields.
    Can you help us with this problem please?
    Your help is much appreciated!
    Edited by: C. Hassink on Feb 2, 2008 3:50 PM
    Edited by: C. Hassink on Feb 2, 2008 3:52 PM
    Edited by: C. Hassink on Feb 2, 2008 3:53 PM
    Edited by: C. Hassink on Feb 2, 2008 3:55 PM
    Edited by: C. Hassink on Feb 2, 2008 3:56 PM

    Hi Ralph,
    I don't like that methode. Importing the same transport 15 times, each time changing the source-system mapping and making sure, that source-system gets the changes seems to be a huge source of errors, which will be hard to find.
    What do you think of the following idea to solve the issue a totally different way:
    All transfer-rules directly connected to the source-systems are stripped of all Coding, so there is a plain 1 by 1 transformation including 0logsys.
    The InfoSources attached all lead to one ODS-Object, which has the only purpose to collect the data from the source-system without any transformation. So some fields a filled by a system and other fields maybe not.
    The coding specific for source-systems is moved to transfer- / update-rules from that ODS-Object to the original ODS-Objects / Cubes and the "collecting" ODS-Object is emptied after every loading process.
    This will result in a single point of change. It will be quite a huge program (maybe in startroutine) but it's the one and only point, where changes and corrections have to be made.
    Regards
    Robert

  • Creation of Material for multiple sales organizations

    Hello,
    is there a way to create a material for one sales organization and that this material can easily be copied
    to other sales organisations? Now it takes a lot of time to create the materials for different sales organizations with
    transaction MM01. Thanks in advance,
    Ivo

    is 5 seconds a lot of time?
    make use of copy from fields in MM01 initial screen, enter as copy from material the material number you want enhance with a new sales org view.
    At the organisation pop-up make sure you enter the copy from sales org and plant on the right.
    next step is just to go into the material and click save button.

  • Checkbox field in REUSE_ALV_GRID_DISPLAY without creating additional field

    Hi Experts,
    I want to show checkboxes in ALV without adding an additional checkbox field in my structure. OO-ALV will also do.......
    Plz Help........

    hi check this...
    REPORT Z_TEST7 .
    *Table declaration
    tables: vbak,vbap.
    *internal table
    data: begin of i_sales occurs 0,
    vbeln like vbak-vbeln,
    erdat like vbak-erdat,
    audat like vbak-audat,
    kunnr like vbak-kunnr,
    vkorg like vbak-vkorg,
    matnr like vbap-matnr,
    netpr like vbap-netpr,
    check type c, "checkbox
    end of i_sales.
    type-pools: slis.
    data: v_fieldcat type slis_fieldcat_alv,
    gt_fieldcat type slis_t_fieldcat_alv,
    gt_layout type slis_layout_alv,
    gt_sort type slis_sortinfo_alv,
    fieldcat like line of gt_fieldcat.
    *Selection screen
    parameters: p_vkorg like vbak-vkorg.
    select-options: s_vbeln for vbak-vbeln.
    *start of selection.
    start-of-selection.
    perform get_data.
    perform fill_fieldcatalog.
    perform write_data.
    FORM get_data .
    select avbeln aerdat aaudat akunnr avkorg bmatnr b~netpr into
    corresponding fields of table i_sales from vbak
    as a inner join vbap as b on avbeln = bvbeln
    where a~vkorg = p_vkorg and
    a~vbeln in s_vbeln.
    ENDFORM. " get_data
    FORM write_data .
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = sy-repid
    IS_LAYOUT = gt_layout
    IT_FIELDCAT = gt_fieldcat
    TABLES
    T_OUTTAB = i_sales .
    ENDFORM. " write_data
    FORM fill_fieldcatalog .
    sort i_sales by vbeln.
    clear v_fieldcat.
    "for check box
    v_fieldcat-col_pos = 1.
    v_fieldcat-fieldname = 'CHECK'.
    v_fieldcat-seltext_m = 'chek'.
    v_fieldcat-checkbox = 'X'.
    v_fieldcat-input = 'X'.
    v_fieldcat-edit = 'X'.
    append v_fieldcat to gt_fieldcat.
    clear v_fieldcat.
    v_fieldcat-col_pos = 2.
    v_fieldcat-fieldname = 'VBELN'.
    v_fieldcat-seltext_m = 'Sales Document'.
    append v_fieldcat to gt_fieldcat.
    clear v_fieldcat.
    v_fieldcat-col_pos = 3.
    v_fieldcat-fieldname = 'ERDAT'.
    v_fieldcat-seltext_m = 'Creation Date'.
    append v_fieldcat to gt_fieldcat.
    clear v_fieldcat.
    v_fieldcat-col_pos = 4.
    v_fieldcat-fieldname = 'AUDAT'.
    v_fieldcat-seltext_m = 'Document Date'.
    append v_fieldcat to gt_fieldcat.
    clear v_fieldcat.
    v_fieldcat-col_pos = 5.
    v_fieldcat-fieldname = 'KUNNR'.
    v_fieldcat-seltext_m = 'Customer'.
    append v_fieldcat to gt_fieldcat.
    clear v_fieldcat.
    v_fieldcat-col_pos = 6.
    v_fieldcat-fieldname = 'VKORG'.
    v_fieldcat-seltext_m = 'Sales Organization'.
    append v_fieldcat to gt_fieldcat.
    clear v_fieldcat.
    v_fieldcat-col_pos = 7.
    v_fieldcat-fieldname = 'MATNR'.
    v_fieldcat-seltext_m = 'Material'.
    append v_fieldcat to gt_fieldcat.
    clear v_fieldcat.
    v_fieldcat-col_pos = 8.
    v_fieldcat-fieldname = 'NETPR'.
    v_fieldcat-seltext_m = 'Net Value'.
    append v_fieldcat to gt_fieldcat.
    clear v_fieldcat.
    endform.

  • CRM: PFCG Roles restricted based on Sales Organization

    Hi,
    I have a requirement in SAP CRM 7.0 to create roles restricted based on Sales Organization(locations). We have two Sales Organization XXX and YYY, for which users need to be restricted. I have used the following objects for this regard.
    CRM_ORD_OP,  CRM_ORD_LP, CRM_ORD_PR, CRM_ORD_OE,  CRM_BP_SA
    Every user has assigned a sales role in which the above objects are deactivated and separate roles with values to the objects, with respective Sales Org values for the objects CRM_ORD_OE,  CRM_BP_SA been provided. I have assigned these roles to respective users (User A with XXX, User B with YYY) based on their sales org locations. These users are positioned in the Organizational Model (PPOMA_CRM) under their respective Sales groups as per the requirement for the object CRM_ORD_LP, and authorization to this object is restricted to A for CHECK_LEV (Your Own Sales Organization). We use * for the objects CRM_ORD_OP and CRM_ORD_PR, as we do not control these.
    After restricting all these, we do not find that the result not appearing as we expect, that is, restricting the sales organization data. We need all accounts, all activities, all opportunities, all leads, all campaigns etc. should be restricted by Sales Org, but when we search for accounts, activities, opportunities, leads, campaigns, we get result list with all data without any restrictions. I even checked the following forum, http://forums.sdn.sap.com/thread.jspa?threadID=1579211, which talks about the same kind of issue, but as I have already using the same objects for the restriction, it didnt help me much. I tried deactivating object CRM_BP_SA as it is not discussed on the forum, also tried CHECK_LEV=A,B,C,D,E for object CRM_ORD_LP, but all results the same.
    Additional Info: When tried to create a project, with user A who is authorized for XXX, normally it would pick up the Sales Area Data for the project from the user (meaning User A from the XXX Sales Org.), but I get an error message: Enter a sales org, enter a dist. channel and enter an org unit etc. Even when I search for leads, it displays a list of data, when I click on any, it issues the error message: Enter a sales org, enter a dist. channel and enter an org unit (Sales) etc
    Is that we miss any object restriction that is not restricting these objects properly or is it any customization missing? Please advice.
    Thanks in advance.
    Regards,
    Shahul Hameed M
    BASIS Consultant

    Hi Shahul,
    I have a similar requirement as of yours.  I have maintained auth values, in role as below:
    CRM_ORD_LP
    03       ACTVT
    A        CHECK_LEV
    *         PR_TYPE
    CRM_ORD_OE
    03       ACTVT
    11       DIS_CHANNE   ( the user is assigned to this dstrbtion channel in org structure)
              SALES_GROU
              SALES_OFFI
    SO1   SALES_ORG
              SERVICE_OR   ( the user is assigned to this sales org in org structure)
    And, when I try to display the LEADs in CRM UI ...I still get the display of LEADs belonging to all sales orgs.
    And my trace record  for CRM_ORD_LP is....
    CHECK_LEV    ' blank '
    PR_TYPE          LEAD
    ACTVT               03
    that means, it is not considering the auth value ' A ' for auth field  CHECK_LEV
    Could you please let me know ...how you have achieved this restriction . Is there anything , i m missing here?
    Thank You

  • Urgent: can i update Sales organizations in KNVV for a custmer ?

    Hello,
    i want to change the sales organization for a custmer, i think to do it with an update in Abap in KNVV table, what do you think ?
    help me

    hi
    If u want to change or extend customer to other sales org then you can extend the same customer to other sales org using XK01
    OR
    You can use the transaction FD01 and enter the customer number already created. Thereafter in company code field, enter the new company code for which you want to create the customer. The General Data will be copied over and company code data view can be entered as per your requirement
    Or use LSMW or BAPI to update
    try to create LSMW with standard object. For more info check here:
    http://www.****************/Tutorials/LSMW/StdObject/StdObject.htm

  • Sales Organization : Address text name ..

    Hi Memebers,
    I am trying to create a sales organization by copying,
    In detail section, I see Address text name as ADRS_SENDER, Other section also have something which I am not understanding. Can you help me understanding.
    Letter header text   ADRS_HEADER      
    Footer lines text    ADRS_FOOTER    
    Thank you.
    Madhu

    Hi Madhu...
    Those are default values for the fields and it won't be affecting your process by anyway...
    You need to notice only the statistics currency and Sales org Calendar...
    Thanks,
    Safeer Rahman

  • Validate Sales Organization in SWI5 Report

    We are enhancing SWI5 report in CRM system and we are copying this to Z program and enhancing it.
    In our new custom Z program we are adding new search field "SALEs Organization". The requirement is to get all the Work items as per sales organization in new Z SWI5 report. I am facing problem in validating the sales organization. Please let me know is there any configurations involved to validated sales organizations entered by user.

    Hello,
    We have a consultancy providing some work on a similar issue.
    You can use method CL_CRM_ORGMAN_SERVICES=>F4_SALES_ORG to provide input help on the sales organization.
    Regarding validation, one of our consultants used
    u201CSELECT SINGLE sales_org FROM comm_pr_frg_rod WHERE  sales_org  = <xxx>"
    This does not seem great to me - if you find a better way, can you share it?
    Stuart.

  • Regarding Sales organization

    Dear Guru's,
    I had a doubt in defining new sales organization.
    Presently there are 4 sales organizations under one company code code. Now i have created new sales org by copying one of the existing .By this, every sales order doc types of the existing sales org. are copied to the new one, which i don't want.
    Is that better to create new sales org individually or to copy from the existing.
    Regards,
    cherukuri

    Hi
    sales organizations can be newly created without being copied
    You  will not face absolutely any problem
    and make all assignments and configurations
    Even copy also can be done and modify according to your needs
    Only Company code and Plant it is adviced to be copied so that all necessary tables also gets copied
    Raja

Maybe you are looking for