Create Report.rdlc Programmatically

Hello All,
I s it possible to make
report.rdlc programmatically?? I
don't want to set up via
"Data Sources" but
pure by code, thank
Xan To

Hi Xan To，
As your issue is related to Reporter, I'm moving your thread to a more appropriate forum--Report
forum for help. thanks for your understanding。
Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

How To: Create Report Completely Programmatically AND Save it!!!

Post Author: nicolasiac
CA Forum: .NET
Hi,
I would to know whether Crystal Reports supports the creation of new reports completely programmatically. (I am using Visual Studio 2005)
So far I am only able to create a new blank report programmatically (using Visual Studio 2005) and add it to an existing VS solution.However, I would like to be able to specify the datasource (stored procedure or table), create and add fields to specific locations on the report and then save these changes in the newly created report.I read that there is a Report Application Server.NET SDK but I didn't understand whether this allows the creation of new fields of a report at runtime only or not.
I would like to create the fields of the report comlpetely programmatically (meaning no designer interaction) and save these fields in the report so that it can be opened by another user. (not at runtime)
Please tell me whether this is supported by Crystal Reports or by purchasing a different version of Crystal Reports.
Regards,
Nicolas

Post Author: Ted Ueda
CA Forum: .NET
You can get pretty close to complete report creation/modification with Crystal Reports XI Release 2 Service Pack 2 and KBase 5074668
Sincerely,
Ted Ueda

Group data with multi tables in report.rdlc

I have a report.rdlc which contains 8 tables and every table reads from different dataset which also reads from different procedure, these tables finally view data for one employee, and this was working correctly. Now I need to view the same report but
for multi employees, I don't know how to make one group(employee number) for the 8 tables although they have different datasets and procedures
this is a Pressing problem
please help me

Hi nermo,
According to your description, you want to display 8 tables in detail rows group on employee number. So it will have 8 tables for each employee. Right?
In this scenario, we can create a dataset whick only return the employee number and put the employee number into a table. Put the 8 tables into 8 separated reports, then add these reports as subreports into detail row. It will display these data even they
are from 8 different dataset. If you want to filter the records in those tables based on the employee number. You need to have the Employee parameter in both main report and subreports and pass the parameter to run subreports. We have tested in this scenario
in our local environment. Here are screenshots for your reference:
Reference:
SSRS Subreport Parameter Passing Issue
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Unable to create report. Query produced too many results

Hi All,
Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
the large amount in the grid anyway?
I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
Here Event Viewer log error at the server:
1. An exception occurred while running a report. The following details may help you to diagnose the problem:
Error Message: Unable to create report. Query produced too many results.
        <br>
        <br>
        Contact the administrator for more details.
Dashboard Name:
Dashboard Item name:
Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
Request Duration: 6,220.93 ms
User: INTRANET\spsdshadmin
Parameters:
Exception Message: Unable to create report. Query produced too many results.
Inner Exception Message:
Stack Trace:    at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
   at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
   at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
   at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
PerformancePoint Services error code 20604.
2. Unable to create report. Query produced too many results.
Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
   at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
   at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
   at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
PerformancePoint Services error code 20605.
Thanks in advance for your help.

Hello,
I would like you to try the following to adjust your readerquotas.
Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
Locate and change the the below values from 8192 to 16384.
Open the Client.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
Locate and change the below values from 8192 to 16384.
After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
<readerQuotas
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
              maxDepth="2147483647"
/>
Thanks
Heidi Tr - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

Performance in the Server with the created report - Crystal Report 2008

Hi
      We have developed a complex report and deployed in the server. It takes more time to process and once if the report created and we are trying to expand a group/navigate different pages, the same time delay is happeneing. Sometimes it takes more than a minute which really kills the performance. My client has accepted the delay while the report is being genrated but they raise question like why it takes too much time just to display the created report.
I tried keeping the created report in Session and rebind on page_load as well stored a copy on the server and rebind whenver postback happens. Both methods working simliar and no improvement the in the performance. Is there any way to kill the time delay in this.( we have an idea like , if we store the created report at client machine and whenever postback happens just bind from client machine instead to hit the server back, Is this achievable)
Any Help would helpful to me
Thanks

Hi
What version of CR are you using?
     Crystal report 2008, I think its in subject of this thread itself. (Version 12.0.0.683)
What if any CR SP have you applied?
    No
What version of .NET are you using?
.Net 3.5 using C# technology (.Net framework 3.5)
What database are you using?
    SQL Server2008
What connection type are you using?
   We have created a Stored Procedure and connected the SP to the crystal report.
What are you comparing the performance to? E.g.; is it faster somewhere else? How much faster?
    No, we didnt compare anywhere. but my question is to avoid the delay in navigation of pages or selecting an item in the group tree. The report contains 100+ pages and client is accepting delay while creating the report but not during navigation or selection( why do the already created report takes more time(even in minutes) to render on navigation or selection and how to avoid the delay))
Define "complex report ".
Nothing complexity in the report even we have used oly less formulas(less than 5) but chats are included and used for each group( we have 6 groups in the report)
Thanks

Creating Report via PL/SQL

We have an application using HTML DB from which the we need to create reports for which the standard CSV will not work. The report can be created via PL/SQL except that the report needs to be created on the users workstation or a public location and not the server. Since UTL_FILE writes to the server, I am looking for help from the HTML DB and PL/SQL experts on packages/tools that can be used to output reports to local directories.

not sure of your exact requirements, but consider using utl_file or Oracle Reports to generate your report on the server and then providing your users a "download report" link that lets them pull the file down locally. we talked about using Reports for this at...
PDF file creation
...regards,
raj

Need advice on how to create report

I'm not sure how to do this, so I'm asking advice from the apex gods...
here is the issue, I have two tables that I need to combine info from. not an issue in its self. I can do that. but here is the issue. in Table A I have some data like disc_id, title, theids, etc.. Table B contains fullname, theid, emplid
now in table A the column 'theids' is populated from apex as a multi select list. so the values in the column is something like 48;3;88
it got these id numbers from the Table B query (lov popup) that returns theid of the person chosen.
now I have to create a report that will be used in a excel download and what they want is one line per disc_id and they want the more useful 'emplid' in the field where 'theids' are at. that is instead of :
disc_id Title theids
101 Test 48;3;88
they want:
disc_id Title Theids
101 test N33456,N3457,N43562
so I'm kind of stuck, I can figure out how to write a sql using instr to get something like this:
101 test N33456
101 test N3457
etc
but that is not what they want. so I'm thinking I need to create a package to do this and return some sort of values. the problem is I can't figure out how I can substitute the 48;3;88 for N33456,N3457,N43562
I'm still new at this pl/sql and apex stuff so sorry if this seems to have some obvious answer.

I might be dense so forgive me on this, but I don't think that will solve it.
your example uses field from apex, like :P3_SOME _VALUE
this report screen has no fields. there are no :P#_ type values to pull. I'm writing a report screen using a report template.
all the data I need for the report exists within the table. I just need to display it the way they want.
I could do just a:
select *
from my_table
and it would create the report just fine. the only issue is one of the columns would have 48:3:88 in the field. which to a person reading the report means little. so i have no apex fields to pull.
I was trying to write a pl/sql function that would substitute those delimited values with meaningful data. but when I do I get multiple rows and I can't have that. so my choices so far I see are..
1) create the report with a simple select leaving the data as is
2) create report that has multiple rows of data where each instr value now has the correct names (some have 2 some have 5, big list to read of dups)
3) create a package that populates a temporary table with the data I need then select on that table to get the report.
right now I'm thinking #3 is the only way to get what I want. By the way your examples would be a great help in doing that I can already see that I can use some of them to create a temp table with that data.
what I was hoping for was some option that I don't understand or missed that a more experienced person would know. but its looking grim.
I thank you all the info you have given, its been a great deal of info that I can use at some point, but so far I don't think it will solve my issue.

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Webi Stucks while trying to create report with BW7.0 (WIS 10901)

Hello,
I have some problem about using data created from BW 7.0
1. After I try to drag more than one object to create report from webi and run the query, it got sutcked and appear error as below;
A database error occured. The database error text is: The MDX query SELECT { } ON COLUMNS , HIERARCHIZE( UNION( { [0GL_ACCOUNT INT].[INT 0HIER_NODE] } , { GENERATE ( { [0GL_ACCOUNT INT].[INT 0HIER_NODE] } , { Descendants( [0GL_ACCOUNT INT].CURRENTMEMBER, [0GL_ACCOUNT INT].[LEVEL01]) } ) } ) ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON ROWS FROM [$0ABC_C06] SAP VARIABLES [0DAT] INCLUDING 20080606 failed to execute with the error See RFC trace file or SAP system log for more details. (WIS 10901)
this error appears when I try to..
- create query with more than one object
- enable drill-down for the object and click the report to drill down
(This error appears the same in Voyager when drag objects into crosstab)
2. problems with displaying Thai language content created from BW, after I created object, thai content always appears as "######" event I change font to "tahoma", it returns the same result.
any expert could help me... thanks in advance
I use BOBJ XI 3.0, SAPBW 7.0
step:
1. Create universe connect to BW 7.0 and export universe
2. logon to infoview, choose universe to create report from webi
3. drag object and test drill down
and step for voyager
1. create voyager connection to SAP BW 7.0 use specified username and password
2. use voyager to create report
3. drag object into crosstab

Hello.
We have solved this issue. We tested our connection with MDX Parser in transaction SM59 and that resulted in errors. Then we applied SAP note 1032461 to replace an application server dll (librfc32u.dll). After this procedure, the WebIntelligence was able to run queries with more then 2 dimensions and key-figures!
Thanks for all.

Creating Report using EPM Functions with Dynamic Filters

Hi All,
I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
Would you please specify in detail step by step.
Thanks in Advance.
Siva Nagaraju

Siva,
These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
You can protect your report to not allow users to have that Edit Report enabled for them.
As Vadim rightly pointed out, start building some reports and then ask specific questions.
Hope it clears your doubts.

Error- Create Report doesnt work on client machine

Hi All,
On one of the machine i have installed
BO XI R2 server,
VS 2005
I have tried Create report application using Web intelligence sdk on it and it's working.
But when i try to run the same sample from another machine it throws an error as below.
Java Plug-in 1.6.0_11
Using JRE version 1.6.0_11 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\sslcomp172
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
load: class com.businessobjects.wp.tc.TCMain not found.
java.lang.ClassNotFoundException: com.businessobjects.wp.tc.TCMain
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://localhost:2112/edit_cs_webi_java_panel/applet/com/businessobjects/wp/tc/TCMain.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: com.businessobjects.wp.tc.TCMain
Please help me
Thanks
Amol Mali

Hi, Amol;
The main point of the error is that there is a class that is not found or missing.
On the other computer, how did you deploy the Crystal runtime files? Have you installed a server version of Crystal to that machine, or does it have the full Enterprise product installed?
Regards,
Jonathan

Print Report RDLC without preview ... very important for me.

Hello, I want to ask you about print Report RDLC without preview .
I saw this article here :
http://msdn.microsoft.com/en-us/library/ms252091.aspx
but I did not understand because the code is long and I think difficult.
could you put simple code please?
Thanks a lot.

Would that fix this mod_jk problem? Do you mean to say that I have those permissions when I actually edit those files?
I think the wiki is also mistaken assuming that JAVA_HOME is in the /opt directory.

Error in creating Report by using JasperReport

Anybody already use JasperReport to create report please help me! I need your help in urgent.
I follow the guide from http://ensode.net/jasperreports_intro.html. However when I run, it show error as follow:
Couldn't complete xls export:java.security.AccessControlException: access denied (java.io.FilePermission C:\Program Files\Sun\Creator2ea\SunAppServer8\domains\creator\config\jasperexample.java delete)
(jasperexample is the name of report I want to create)
Any help or advice is high appreciate.
Thanks so much.
Carol

Hi,
Please go through the below thread:
http://swforum.sun.com/jive/thread.jspa?threadID=50166
Hope this helps.
Thanks,
RK.

How to create report in the following form?

Hi All,
how I am using FR studio for creating reports.
I want to create a report which will show me accounts per entity,which means I want to keep the entity in the page dimension and accounts in the row dimension.The report should be done in such way that if I am taking one entity in page dimension then it will show some accounts in the row dimension which
are specific for that entity and in the similar way if I am taking another entity in page dimension then it should show me another different set of accounts in
the row dimension for that specific entity.
How can I achieve this in my report?
Thanks

Hi,
Your requirement is to create a report which has correct combinations of Entity and Accounts.
First step will be to create this account-entity mapping list. If you are not using the BegBalance member for storing your data, you could enter 0 value in Begbalance of each valid entity - account combination. Thus you have the valid accounts for the entity, that have data in Begbalance. You would capture data against these combinations only in the Planning data forms as well.
In the report, you will hide this Begbalance column, while showing other Period columns and select "Suppress Missing Rows/blocks" in rows.
Thus the report will only show valid accounts for the entity selected while running the report.
Let me know if it helps.
Cheers
RS

Create Report.rdlc Programmatically

Similar Messages

Maybe you are looking for