Error -1074397038 occurred at IMAQ Start.vi for 64bit Labview 2011 SP1, Win7

Hello,
I am using a MC1362 camera from Mikrotron with a PCIe1433 framegrabber. I was using it with windows XP, 32 bit, labview 2010 SP1 32 bit, it was working perfectly fine. I just switch to windows 7 with labview 2011 SP1 64bit, and it is not working anymore with my custom routine in labview, though it works with MAX and camera file generator and I use the same camera file.
When I run my routine, I have this error message:
Error -1074397038 occurred at IMAQ Start.vi
Possible reason(s):
NI-IMAQ: The requested serial termination string was not found in the returned buffer.
Then, If I try to run the camera with MAX, it doesn't work anymore, I have to reboot the camera, and put it in the right mode with the Mikrotron control tool to obtain an image.
I have seen similar issue on a Basler camera on the forum, and it has been solved by using a camera file to set the different parameters. There is no camera file complete to set all the parameters of the camera, so I had to program them in serial to drive the camera with my Labview routine.
Could you help me to solve this issue please?
Thanks
Bests
David Dulin

This forum post is already handled --> SR 1154262.
Kind regards,
Corné Westeneng
Applications Engineer
NI-Netherlands

Similar Messages

Error 229771 occurred at DAQmx Start Task - only in Labview project

Labview 2011 sp1
os: W7 32bits
DAQmx 9.7.0f0
ni-PCI 6251
Hi,
I'm working with a ni-PCI 6251 card. I got the error : Error -229771 occurred at DAQmx Start Task. Possible reasons :Internal sofware error occured in MIG software ... when I'm trying to launch my data acquisition vi. This error was already reported in this post :
http://forums.ni.com/t5/Academic-Hardware-Products-NI/Error-229771-occurred-at-DAQmx-Start-Task/td-p...
I tried to reinstall DAQmx as explained in the post but it unfurtunatly it did'nt fix my issue.
I've notice the following points :
1. This error appears randomly, after several reboots the vi will finally run without error
2. The error only appears when the vi is included in project
I will really appreciate any kind of help.
sebastian
Attachments:
test_daq_2.vi ‏23 KB

Bonjour,
Je vous invite à jeter un oeil sur le lien suivant :
http://digital.ni.com/public.nsf/allkb/03123D0E8A36C48E862577A4005B6BAA?OpenDocument
Il devrait résoudre votre problématique.
Cdlt,
Matthieu RICORD
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

Error -200587 occurred at DAQmx Start Task.vi:7

I am running the attached code Merrit_Coil_calibration, and I get the following error:
Error -200587 occurred at DAQmx Start Task.vi:7
Possible reason(s):
Requested operation could not be performed, because the specified digital lines are either reserved or the device is not present in NI-DAQmx.
It is possible that these lines are reserved by another task, the device is being used through the Traditional NI-DAQ interface, or the device is being reset. You might also get the error if the specified resource is currently in use by LabVIEW network variables bound to the DAQ Channel, or if the DAQ Channel is being used in any OPC Client software.
If you are using these lines with another task, wait for the task to complete. If you are using the device through the Traditional NI-DAQ interface, and you want to use it with NI-DAQmx, reset (initialize) the device using the Traditional NI-DAQ interface. If you are resetting the device, wait for the reset to finish.
Device: Dev2
Task Name: _unnamedTask<F>
I am calling the same DAQ, many different places in my code and I think that is the problem, but I can not figure out why or hw to fix it. Anyone have any suggestions?
Attachments:
Final.zip ‏2434 KB

Thank you both for your input. I slightly changed my code to Merritt_Coil_calibration (updated code attached) and the first error went away, but now I have a different one which is:
Error -200429 occurred at DAQmx Write (Digital U32 1Chan 1Samp).vi:1
Possible reason(s):
Value passed to the Task/Channels In control is an empty string (or I/O control).
The value must refer to a valid task or valid channels.
As far as what DAQ device I am using, it is the NI USB 6009. I am only using digital port 0. During different pieces of my code I send different values to port 0. I am using this to drive some stepper motors. I thus send square waves on the different pins on port 0. I do not know if this is exactly what you were asking.
Whatever the case, I was wondering if anyone knows why this error occurs and how I could fix it.
thanks.
Attachments:
honorsproject.zip ‏256 KB

Error -1074397150 occurred at IMAQ Snap.vi

Hi.
(Sorry if my English is wrong )
I want to snap a picture - from a camera that was designed in my lab - and save it in a BMP file.
I use the "IMAQ PCI-1428" to accomplish this task and the "HL snap&save to BMP.vi".
But, as I try to run the VI I'm getting this error - "Error -1074397150 occurred at IMAQ Snap.vi", afterward I'm getting
another massage - "ERROR(DMA Timeout): The system is unable to capture all of the incoming video data....".
What should I do, to resolve this problem?
ThanX.

Hi elbit,
Here is a link to Error
Codes with NI-IMAQ. You error is
addressed there and that information may be helpful to you.
I noticed you were using the PCI-1428 framegrabber card. This card supports Camera Link cameras. In order to tell the PCI-1428 how to
communicate with the camera, the NI-IMAQ driver uses a camera file that
contains camera specific information for configuration. You will need to have a properly configured
camera file for you camera that you have created.
NI has a large number of camera files that are created and
certified to support popular industrial grade cameras. In cases where a custom camera file is needed,
NI provides the NI-Camera
File Generator as a utility for camera file creation. Keep in mind that custom camera files are not
supported by National Instruments Applications Engineers.
Good luck with your camera design. Please let us know if you have any further
questions or concerns.
Regards,
Luke H

Error - 1074397153 occurred at IMAQ Grab Setup.vi

The sensor we are using is Goodrich SU640KTSX. I can run SUI image Analysis 3.1 software, Measurement & Automation software, and MATLAB code on an XP machine with no errors when grabbing images. We are tying to build a newer PC;
Dell T7500 with Intel xeon CPU x5650 @ 2.67GHz
Memory; 12GB
OS Win7 64-bit
Camlink card is NI PCIe-1430
Nvidia QUADRO 4000
The error we get is "Error -1074397153 occurred at IMAQ Grab Setup.vi / Cannot detect recognizable video source" when using the SUI image Analysis 3.1 software or MATLAB code. When we use the NI-IMAQ i/o 2.3.1- Measurement & Automation I can snap, grab and record without any error.
Any help on this would be great
Thanks

Hi,
Let us know which standard your camera is following (whether it is cameralink or ethernet).
Check this link for error info: http://digital.ni.com/public.nsf/allkb/3434173630CBC97686256F8000536593.
If at all it is cameralink camera make sure that you are following proper trigger sequence for your camera. As u are grabbing frames in MAX and not in other acquisition softwares it might be triggering issue or cables problem.

Error -1074395975 occurred at IMAQ AVI Read Frame DirectX has timed out readin

When i run the "Read AVI Example" on every kind of AVI file, I get the error:
Error -1074395975 occurred at IMAQ AVI Read Frame DirectX has timed out reading or writing the AVI file. When closing an AVI file, try adding an additional delay. When reading an AVI file, try reducing CPU and disk load.

The forums search gives two threads talking about this error:
http://forums.ni.com/ni/board/message?board.id=170&message.id=392042&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&requireLogin=False&thread.id=195832
Did you allready had a look at them?

Folio Builder: An error has occurred opening the source file for the article layout.

I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=true

Questions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps

Internal error has occurred. Check log files for details.

While configuring software library on OEM 11g grid control, i get the error as Internal error has occurred. Check log files for details.
On checking emoms.trc i see the following error
2011-08-08 22:15:13,298 [EMUI_22_15_13_/console/provision/admin/admin] ERROR em.provis
ion checkAllSoftwareLibLocs.216 - AdminUtil:checkAllSoftwareLibLocs: No software libra
ry locations configured.
2011-08-08 22:15:13,320 [EMUI_22_15_13_/console/provision/admin/admin] ERROR em.provis
ion handleValidateLocsSoftwareLib.1754 - AdminController:handleValidateLocsSoftwareLib
: ComponentException while fetching all software library locations from repostiory.
oracle.sysman.emgc.provision.component.ComponentException: Software Library location i
s not configured.
at oracle.sysman.emgc.provision.ui.model.admin.AdminUtil.checkAllSoftwareLibLo
cs(AdminUtil.java:218)
at oracle.sysman.emgc.provision.ui.model.admin.AdminUtil.checkAllSoftwareLibLo
cs(AdminUtil.java:146)
at oracle.sysman.emgc.provision.ui.controller.admin.AdminController.handleVali
dateLocsSoftwareLib(AdminController.java:1746)
at oracle.sysman.emgc.provision.ui.controller.admin.AdminController.handleEven
t(AdminController.java:397)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleRequest(AbstractProvisioningPageHandler.java:235)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:738)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:329)
at oracle.sysman.eml.app.Console.doGet(Console.java:352)
at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubS
ecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelp
er.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.exception.EMRuntimeExceptionFilter.doFilter(EMRuntim
eExceptionFilter.java:58)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.jav
a:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.ja
va:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:10
2)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.
java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje
ct.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServlet
Context.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext
.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:14
32)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
2011-08-08 22:24:58,397 [EMUI_22_24_58_/console/provision/admin/edit_sw_lib_dir_config
uration] ERROR svlt.PageHandler handleRequest.640 - java.lang.NoClassDefFoundError: Co
uld not initialize class oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps
java.lang.NoClassDefFoundError: Could not initialize class oracle.sysman.oii.oiip.osd.
unix.OiipuUnixOps
at oracle.sysman.oii.oiip.oiipg.OiipgFileSystem.getVolumeName(OiipgFileSystem.
java:615)
at oracle.sysman.eml.swlib.bitstore.FileBitStore.getFreeSpaceInKB(FileBitStore
.java:1044)
at oracle.sysman.eml.swlib.LibraryServiceImpl.getFreeSpaceInKB(LibraryServiceI
mpl.java:1572)
at oracle.sysman.emgc.provision.impl.component.SoftwareLibraryImpl.getFreeSpac
eInKB(SoftwareLibraryImpl.java:2582)
at oracle.sysman.emgc.provision.impl.component.ComponentManagerImpl.getFreeSpa
ceInKB(ComponentManagerImpl.java:664)
at oracle.sysman.emgc.provision.ui.model.admin.SoftwareLibContext$OkButton.han
dleClickEvent(SoftwareLibContext.java:860)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleEvent(AbstractProvisioningPageHandler.java:427)
at oracle.sysman.emgc.provision.ui.controller.admin.SoftwareLibController.hand
leEvent(SoftwareLibController.java:53)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleRequest(AbstractProvisioningPageHandler.java:235)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:738)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:329)
at oracle.sysman.eml.app.Console.doGet(Console.java:352)
at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubS
ecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelp
er.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.exception.EMRuntimeExceptionFilter.doFilter(EMRuntim
eExceptionFilter.java:58)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.jav
a:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.ja
va:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:10
2)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.
java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje
ct.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServlet
Context.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext
.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:14
32)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Hi, I followed all the steps correctly and also the owner of the directory is correct.
But i have not installed the patches which is listed at the bottom of the link page.
I had done this on RHEl and i had no problem but now i am getting problem on solaris.

Error -1074395395 occurred at IMAQ Match Color Pattern after merge programs

Dear all
I have 2 separate programs that use same source image (red01a1.jpg). The first find location of color particles (color location 01.vi) and second find location of particles after threshold color image (particle location 01.vi). Both of them run good.
But when 2 programs were merged into one program (color sorter 01i.vi), that happened error . The error message is “Error -1074395395 occurred at IMAQ Match Color Pattern”. How can I fix it ?
Thanks
Solved!
Go to Solution.
Attachments:
color sorter 01i.vi ‏126 KB
Color -particle location.zip ‏86 KB
red01a1.zip ‏86 KB

Hi Xuan
Check it out the attached vi
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney
Attachments:
color sorter 01i.vi ‏120 KB

Error -1074396116 occurred at IMAQ CalibrationTargetToPoints

Error -1074396116 occurred at IMAQ CalibrationTargetToPoints, So there any one to solve this problem and thank you.

there is the VI and the picture of device. SO i need to calculate the dimension and thank you
Attachments:
Calibration.vi ‏77 KB
Capture.PNG ‏27 KB

Error 10846 occurs only if DMA mode for transfer ist selected

Hello,
my problem is if I use the DMA mode to for transferring data to the PCs memory always the error 10846 occurs.
I perform the buffered semiperiod measurement with a continuous buffer (circular buffer).
I tried to use Interrupts. The error does not occured.
Is this a known problem?
I read another thread in this forum. But there are no useful answers up to now.
I'm thankful for any hints.
Regards Peter

Hi Peter,
The NI-DAQ Help Manual gives this description for the error:
"Your application was unable to retrieve data from the background acquisition buffer fast enough so the unretrieved data was overwritten with new data. To prevent this error, you might increase the size of the background acquisition buffer, increase the amount of data you read from it per call to the read function/VI, slow down your acquisition rate, or reduce the number of tasks your computer is performing."
This is all valid info because I believe that your acquisition rate is on the verge of being too fast for your buffer size and the number of data points you are reading into your application each time. Therefore, DMA, which is a faster transfer mechanism to get data from your c
ard to the PC memory is probably loading the PC memory with many samples until it catches up with the data acquisition card where as Interrupts will gradually transfer the data to the PC memory. This means DMA is bursting data to a PC memory buffer that is slightly too small while Interrupts are transferring at the same rate you are reading (unless you change your acquisition rate depending on the transfer protocol).
I think the only change you need is to increase the size of your buffer (PC memory). If that doesn't work, also increase the number of points you read from the buffer each time by your application program. There will be a balance between these two numbers that will allow smooth operation with DMA. Hope that helps.
Ron

Mac app store "an error has occurred" and greyed out button for download

I'm trying to download an app in the mac app store.
It's got stuck and nothing seems to get it going again.
I get "an error has occurred" and the button along side is grey.
If I click the button it does a little animated click and nothing happenes.
Any idea how to resolve this?

Run Console to check the recent logs for more details (look for com.apple.installd).
In example, I had something like:
com.apple.launchd[1]: (com.apple.installd[69518]) Job appears to have crashed: Abort trap: 6
ReportCrash[69520]: Saved crash report for installd[69518] version 332 to /Library/Logs/DiagnosticReports/installd_2014*.crash
And when checked backtrace under System Diagnostic Reports, there is something like:
Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSKeyedUnarchiver initForReadingWithData:]: incomprehensible archive
So it's possible that update files were corrupted. Try to remove these files and re-try again.
See: https://discussions.apple.com/thread/4234582
From Terminal check if you've temporary files here:
ls -la /private/var/folders/*/*/*/com.apple.appstore
And then try to remove them (you may backup them first just in case):
rm -frv /private/var/folders/*/*/*/com.apple.appstore
Or eventually run Finder and go to: /private/var/folders and Trash all the folders (if something bad happens, restore it from your Trash).
And re-try again.
Removing all the folders from /private/var/folders it actually fixed the problem on my laptop.

"Unknown error has occurred" when changing primary email for Apple ID

It tells me the primary email I'm changing it to, is available and everything, but when I click "save changes" it sends me back to the Apple ID log in page and gives me the message "An unknown error has occurred".
How can it be Unknown? How can I fix it? I wish I could ask Apple directly, but I live in a country where I don't think it possible to call them. I've searched and there seems to be no way to contact them through email or something.
What can I do?? This is very stressful.

Apple - Support - Contact Apple Support
See all worldwide telephone support numbers

Error 1074396024 occur at imaq usb snap.vi

hallo, ich habe labview 8.0 mit dem vision development modul und
benutze eine logitech webcam zur bilderfassung. ich habe ein vi
erstellt das im zeitraum von 1s ständig neue bilder macht und diese mit
einem referenzbild vergleicht. mein problem ist das so bei ungefähr
1000 vergleichen eines neuen bildes mit dem referenzbild der fehler
1074396024 occur at imaq usb snap.vi auftritt und ich aber nicht weiß
warum. würde mich freuen wenn mir jemand helfen kann

Please have a look at this thread which discusses similar issues in detail.
Best regards,
Jochen Klier
National Instruments Germany

Error - 1073741819 occurred when i try to print in LabVIEW

error - 1073741819 occurred when i use the "set Report font.vi" during to print in LabVIEW,but i am using the 6.1 version and not the new one, how can i solve this problem?
-attachement:
Attachments:
Print help.vi ‏112 KB

b_rani wrote:
error - 1073741819 occurred when i use the "set Report font.vi" during to print in LabVIEW,but i am using the 6.1 version and not the new one, how can i solve this problem?
-attachement:
Hi b_rani
Check this knowledgebase:
http://digital.ni.com/public.nsf/websearch/5A42F1725790DFBC86256B900075F884?OpenDocument
Hope this helps
Regards,
Manuel Wielander
NI

Error -1074397038 occurred at IMAQ Start.vi for 64bit Labview 2011 SP1, Win7

Similar Messages

Maybe you are looking for