Error while source system creation/Source system transport

Hi,
     In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
     Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
     I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
     Message no. RSAR502
Diagnosis
     With Remote Function Call to system GWPCLNT900 error connection closed
     (no data) ccurred.
Procedure
     Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
Krishna

Hi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier

Similar Messages

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Error while processing message to remote system

Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
Raghavendra

Hi,
>>>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha.

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Error while reading PO in backend system Inform system adiministrator

Hi All,
I am working on extended classic scenario and the problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" and this is happening only for a particular local PO.
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
Also I could not find any logs in RZ20 nor a dump.
When I checked in bbp_pd, couldnt find any relevant information except that the PO has the status ordered.
I am on SRM version BBPCRM 4.0 SAPKU40007
R/3 version 4.6 C SAPKH46C47
Thanks in advance,
Rgrds,
Raj
Message was edited by:
Raj Malhotra

Hi
Have you tried out this ?
There are two BADIs which might help you in achieving the job.
BBP_EXTLOCALPO_BADI [Control Extended Classic Scenario ]
and
BBP_GROUP_LOC_PO
[Exit Grouping of Items for Local Purchase Orders]
Read the documenatation first, using transaction - SE18
before implementing them for your requirement.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Error while installing Mini SAP Basis system 4.6D test suite

Hi Gurus,
I am getting error while installing Mini SAP Basis system 4.6D test suite on my laptop. I trying to install this version under Windows Xp. I tried so many times to rectify this error but no use. i followed the instruction in the readme file.The error is below in quote.
"InstController MakeStepsDeliver:108 connection to GUI of installation tool has been cut off.Installation has been stopped."
your help very much appreciated...
Regards
dinesh.a

is win xp supported for mini sap 46d?
-> try netweaver 2004s instead ...
GreetZ, AH

There's an error while delivery note creation for STO order

There's an error while delivery note creation for STO order even stock available in unrestricted stock
Edited by: sharma aman on Nov 8, 2011 9:00 AM

Dear Sharma Aman,
Check whether the following link helps you.
Mesaage : while creation of delivery : An item with no delivery quantity .)
Please search in google with the error message and definitely you will get some older posts in SDN which is solved.
In that case , you need not wait for the solution as it is already available.
If the solution provided do not suit you, then post it in SDN so that it will be a learning for others.
Try to search in the forum or in google before posting further queries
Thanks & Regards,
Hegal K Charles

Error while Replicating the Data Source in Quality System....

Dear Expert,
I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system. Everything is fine in DEV system.
I have transported the Data Source to R/3 Quality System. And transported the related objects in BW DEV system to BW QUALITY system.
Now I am getting the error as follows :
BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
*DATASOURCE*.( clicked )
Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
RFC connection to source system LOGSYS is damaged ==> no Metadata upload
What could be the issue ?? Please suggest.
Thanks,
Sanjana

Hi saveen,
Yes I transported in that manner.
I checked in Source System ( RSA13):
Its giveng the pop-up ,
RFC connection check failed. Check connection
Please suggest, how can I proceed ?
Thanks,
Sanjana

With out source system creation we have transported all the flow

Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran Kumar

Hi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet

Error while Creating Flat file Source System

Hi Friends,
The message "No entry for BW_USER in table RSADMIN available" is shown when I try to create a Source System for File System(Manual Metadata, Data using File Interface). Could somebody help me please.
Thanks in advance.
Hanuma Reddy

Hi,
I have solved this problem from SDN by seeing below reply to some others question. Thanks Ajay.
I think this problem comes if you have used more than one client in BW (for example if you logged on to 000 and ran admin workbench initially after installation, and then if you prepared another client for use as BW client).
Look at OSS note 410952, it mentions of the same error. The fix as mentioned in the note is as follows
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Error while activating r/3 souce system

hello guys ,
encounterd an error while activating the r/3 source system ...
rsa1> source system> r/3 ( activate)
errors : " entry in inbound table is not found"
"entry in outbound table is not found "
as a result r/3 source system is not activated .
so kindly reply to the above query..
thanks
kk

Hi Krishna,
The connection to R/3 is not correctly set.
The partner profiles are not available in this case. You can check this in T-code WE20 in R/3 under type LS.
Please recreate the source system in BW from RSA1.
Reagrds,
Amol

Error while tansporting the Data Source & Transformation

Dear Experts,
I stuck in one problem. I just tried to transport one data source & its transformation fron BWD to BWQ. After importing the request, it throws an error (mentioned below):
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Password logon no longer possible - too many failed attempts
Error when activating DataSource ZMAT_MAPVL RQ1CLNT400
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS ZMAT_MAPVL RQ1CLNT400 does not exist
Also i check the same data source on R/3 system where it is available in activated form. I also replicate the same & tried to transport it again on BWQ but still the same.
Please help me out.
Thanks in advance
Neha

Hi,
Did you check the 'Conversion of logical system names' option?, whether your source is mapped to correct R3 system?. If not please check and map with the correct R/3 Quality system and sometimes there may be more than one R/3 system connected to quality, if so remove the wrong one.
For Password logon no longer possible, please check your RFC connection(SM59) by selecting the option Remote logon, it shd give you the error. As background user got locked it seems. Please check.
Thanks,
V.Senthil
Edited by: Senthilkumar Viswanathan on May 10, 2011 7:21 AM

Error while testing Generic Data Source extraction

I've created generic data source for Texts and Attributes in R/3 based on VIEW (Z table)
I get error "Error 6 in function module RSS_PROGRAM_GENERATE" while trying to test the data sources through RSO2
I guess there can be a lot of reasons... Please name me anybody who knows them...
thanx in advance

Hi,
Please Check the OSS note 328948 and it provides solution to same error what you have. Additionally you can have a look into this OSS note 705212 too.
Syntax error in the generated extraction program Symptom
You notice the error by one of the following symptoms:
The loading of transaction data from an R/3 system terminates with a syntax error in the generated extraction program. The monitor displays the error messages:
R3027 "Error & during the generation of the data transfer program"
RSM340 "Error in the source system"
The extraction within the extractor checker terminates with error message RJ028 "Error 6 in function module RSS_PROGRAM_GENERATE".The activation of transfer rules ends in BW with error message RG102 "Syntax error in GP$ERR$, row... (-> long text)" from the source system. Usually, the diagnosis in the long text of the error message is: "...could not be interpreted. Possible error causes: Incorrect notation or... "
Other terms
OLTP, extractor, data extraction, DataSource, Service API, SAPI,
R3 027, R3 27, RSM 340, RJ 028, RJ 28
Reason and Prerequisites
The error only occurs in the source system, if this contains Basis Release 3.1I and Service API (SAPI) 3.0C Support Package 6. SAPI 3.0C Support Package 6 is contained, for example, in PI 2003.1 Support Package 7 (see attached composite SAP note 673002).
Solution
To correct the problem you need service API 3.0C Support Package 7 in the affected source system. The attached composite SAP note 704971 explains in which software components service API 3.0C is contained, and what the corresponding Support Packages of these components are.
Alternatively, you can also copy the advance correction from the appendix.
Hope it helps.
Regards

Error while extracting from BI source

Hi,
We are facing a wierd problem:
Scenario:
Loading data from one DSO to another DSO with the help of transformation
The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
Error:
Data package processing terminated
Error while extracting from source EPUD0002 (type InfoProvider)
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Unknown error in SQL interface
Error reading the data of InfoProvider EPUD0002
Exception CX_RS_STEP_FAILED logged
Workaround:
We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
FYI...Our transformation has lots of abap coding ...
Addn Info:
SAP_BW 700 0010
BI_CONT 703 0005
SAP_BASIS 700 0010
Any help will be highly appreciated...
- Amit

There must be some bug in the code which is causing this issue.
try to debug it,
refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
/people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw

Error while source system creation/Source system transport

Similar Messages

Maybe you are looking for