Excel client does not work
as i try to open a dynamic template or evdre screen we get the following message "evdre encountered an error retrieving data from the web server" clicking "retry now" is resulting in same message only after clicking cancel option a template is built.
but in this case we are not able to send data and get the following message "empty casheno data to send"
any idea what the reason can be
tried it again and realised that current view was not properly selected and our apshell had some empty dimensions.
after we filled these dimesions and selected all base members of other dimesions the problem did not appeared again.
it is about mastes data but i will let you people know if this problem continues or another solution fits for this issue.
best regards
and
thanks for helpful advises
Similar Messages
-
Cisco 1841 as PPTP client Does not work
Dear All,
I have Cisco 1841 router running the below roles
1) SSL VPN Server
2) PPTP Server
3) Site to Site Connection with Sonicwall router
I want the router to be configured a pptp client to internet vpn server (so that i will get a fixed public ip )
Once i get this ip address i want to use this connection to accept in coming connection and forward ports to internal host,
I went through below
http://www.mreji.eu/content/cisco-router-pptp-client
https://supportforums.cisco.com/thread/2167562
But it does not work as i do not have the option for the below 2 commands in vpdn-group 2 section.(Please see section in blue)
protocol pptp
rotary-group 4
Please Advise and Help
Regards
Hasan Reza
My Current Config is as below
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.06.09 17:55:23 =~=~=~=~=~=~=~=~=~=~=~=
exit
Gateway#show run |
Building configuration...
Current configuration : 25109 bytes
! Last configuration change at 13:33:57 UTC Sun Jun 9 2013 by admin
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Gateway
boot-start-marker
boot system flash c1841-advsecurityk9-mz.151-2.T1.bin
boot-end-marker
logging buffered 4096
no logging console
enable secret 5 $1$SciF$TlX1tR5qaG9ZE7pdZHcRJ/
no aaa new-model
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 10.236.5.1 10.236.5.20
ip dhcp excluded-address 10.236.5.21 10.236.5.50
ip dhcp excluded-address 172.21.51.2 172.21.51.50
ip dhcp pool ContosoPool
network 10.236.5.0 255.255.255.0
default-router 10.236.5.254
dns-server 213.42.20.20 195.229.241.222
ip dhcp pool DMZ
network 172.21.51.0 255.255.255.0
dns-server 172.21.51.10
default-router 172.21.51.1
domain-name contoso.local
ip cef
ip domain name contoso.local
ip name-server 213.42.20.20
ip name-server 195.229.241.22
ip name-server 195.229.241.222
ip ddns update method dyndns
HTTP
add http://xxxxxx:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
remove http://xxxxxx:yyyyy@@members.dyndns.org/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 0 1 0 0
multilink bundle-name authenticated
vpdn enable
vpdn-group 2
request-dialin
protocol l2tp
initiate-to ip 173.195.0.42
vpdn-group RAS-VPN
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
l2tp tunnel timeout no-session 15
crypto pki token default removal timeout 0
crypto pki trustpoint TP.StartSSL.CA
enrollment terminal pem
revocation-check none
crypto pki trustpoint TP.StartSSL-vpn
enrollment terminal pem
usage ssl-server
serial-number none
fqdn ssl.spktelecom.com
ip-address none
revocation-check crl
rsakeypair RSA.StartSSL-vpn
crypto pki trustpoint TP-self-signed-1981248591
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1981248591
revocation-check none
rsakeypair TP-self-signed-1981248591
crypto pki trustpoint VMWare
enrollment terminal
revocation-check crl
crypto pki trustpoint OWA
enrollment terminal pem
revocation-check crl
crypto pki certificate chain TP.StartSSL.CA
certificate ca 01
(removed the certificate info for clarity)
quit
crypto pki certificate chain TP.StartSSL-vpn
certificate 0936E1
(removed the certificate info for clarity)9
quit
certificate ca 18
(removed the certificate info for clarity)
quit
crypto pki certificate chain TP-self-signed-1981248591
certificate self-signed 01
(removed the certificate info for clarity)
quit
crypto pki certificate chain VMWare
certificate ca 008EDCE6DBCE6B
(removed the certificate info for clarity)
quit
crypto pki certificate chain OWA
(removed the certificate info for clarity)
license udi pid CISCO1841 sn FCZ122191TW
archive
log config
hidekeys
username admin privilege 15 password 7 1304131F02023B7B7977
username ali password 7 06070328
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 84000
crypto isakmp key admin_123 address 0.0.0.0 0.0.0.0
crypto isakmp keepalive 10
crypto ipsec security-association lifetime seconds 28800
crypto ipsec transform-set vpnset esp-3des esp-sha-hmac
crypto ipsec transform-set strongsha esp-3des esp-sha-hmac
crypto dynamic-map mydyn 10
set transform-set strongsha
crypto map Dxb-Auh 1000 ipsec-isakmp dynamic XXXXXXXXXX
interface FastEthernet0/0
description Internal Network (Protected Interface)
ip address 10.236.5.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
shutdown
no atm ilmi-keepalive
interface BRI0/1/0
no ip address
encapsulation hdlc
shutdown
interface Virtual-Template1
ip unnumbered Dialer1
peer default ip address dhcp-pool ContosoPool
ppp encrypt mppe auto required
ppp authentication ms-chap ms-chap-v2 eap
interface Dialer1
ip ddns update hostname XXXXXXX.dyndns.org
ip ddns update dyndns
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1450
dialer pool 1
ppp pap sent-username vermam password 7 13044E155E0913323B
crypto map Dxb-Auh
interface Dialer2
mtu 1460
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer in-band
dialer idle-timeout 0
dialer string 123
dialer vpdn
dialer-group 2
ppp pfc local request
ppp pfc remote apply
ppp encrypt mppe auto
ppp authentication ms-chap ms-chap-v2 callin
ppp eap refuse
ppp chap hostname hasanreza
ppp chap password 7 070E2541470726544541
interface Dialer995
no ip address
ip local pool webssl 10.236.6.10 10.236.6.30
ip forward-protocol nd
ip http server
ip http secure-server
ip nat inside source list nat interface Dialer1 overload
ip nat inside source static tcp 10.236.5.12 25 interface Dialer1 25
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 172.21.51.0 255.255.255.0 10.236.5.253
ip access-list extended internal
permit ip any 10.236.5.0 0.0.0.255
ip access-list extended nat
deny ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
deny ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
permit ip 10.236.5.0 0.0.0.255 any
ip access-list extended nonat
permit ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
ip access-list extended sslacl
ip access-list extended webvpn
permit tcp any any eq 443
logging esm config
access-list 101 permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
control-plane
line con 0
line aux 0
line vty 0 4
exec-timeout 0 0
login local
transport preferred ssh
transport input telnet ssh
line vty 5 15
exec-timeout 0 0
login local
transport preferred ssh
transport input telnet ssh
scheduler allocate 20000 1000
webvpn gateway gateway1
ip interface Dialer1 port 443
ssl encryption rc4-md5
ssl trustpoint TP.StartSSL-vpn
inservice
webvpn install svc flash:/webvpn/anyconnect-win-3.1.00495-k9.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context webvpn
ssl authenticate verify all
url-list "Webservers"
heading "SimpleIT Technologies NBNS Servers"
url-text "Google" url-value "www.google.com"
url-text "Mainframe" url-value "10.236.5.2"
url-text "Mainframe2" url-value "https://10.236.5.2"
nbns-list "ContosoServer"
nbns-server 10.236.5.10
nbns-server 10.236.5.11
nbns-server 10.236.5.12
port-forward "PortForwarding"
local-port 3389 remote-server "10.236.5.10" remote-port 3389 description "Server-DC01"
policy group policy1
url-list "Webservers"
port-forward "PortForwarding"
nbns-list "ContosoServer"
functions file-access
functions file-browse
functions file-entry
functions svc-enabled
svc address-pool "webssl"
svc default-domain "Contoso.Local"
svc keep-client-installed
svc split include 10.236.5.0 255.255.255.0
svc split include 10.236.6.0 255.255.255.0
svc split include 172.31.1.0 255.255.255.0
svc split include 172.21.51.0 255.255.255.0
svc dns-server primary 172.21.51.10
default-group-policy policy1
gateway gateway1
inservice
end
Gateway#Dear All,
I have Cisco 1841 router running the below roles
1) SSL VPN Server
2) PPTP Server
3) Site to Site Connection with Sonicwall router
I want the router to be configured a pptp client to internet vpn server (so that i will get a fixed public ip )
Once i get this ip address i want to use this connection to accept in coming connection and forward ports to internal host,
I went through below
http://www.mreji.eu/content/cisco-router-pptp-client
https://supportforums.cisco.com/thread/2167562
But it does not work as i do not have the option for the below 2 commands in vpdn-group 2 section.(Please see section in blue)
protocol pptp
rotary-group 4
Please Advise and Help
Regards
Hasan Reza
My Current Config is as below
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.06.09 17:55:23 =~=~=~=~=~=~=~=~=~=~=~=
exit
Gateway#show run |
Building configuration...
Current configuration : 25109 bytes
! Last configuration change at 13:33:57 UTC Sun Jun 9 2013 by admin
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Gateway
boot-start-marker
boot system flash c1841-advsecurityk9-mz.151-2.T1.bin
boot-end-marker
logging buffered 4096
no logging console
enable secret 5 $1$SciF$TlX1tR5qaG9ZE7pdZHcRJ/
no aaa new-model
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 10.236.5.1 10.236.5.20
ip dhcp excluded-address 10.236.5.21 10.236.5.50
ip dhcp excluded-address 172.21.51.2 172.21.51.50
ip dhcp pool ContosoPool
network 10.236.5.0 255.255.255.0
default-router 10.236.5.254
dns-server 213.42.20.20 195.229.241.222
ip dhcp pool DMZ
network 172.21.51.0 255.255.255.0
dns-server 172.21.51.10
default-router 172.21.51.1
domain-name contoso.local
ip cef
ip domain name contoso.local
ip name-server 213.42.20.20
ip name-server 195.229.241.22
ip name-server 195.229.241.222
ip ddns update method dyndns
HTTP
add http://xxxxxx:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
remove http://xxxxxx:yyyyy@@members.dyndns.org/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 0 1 0 0
multilink bundle-name authenticated
vpdn enable
vpdn-group 2
request-dialin
protocol l2tp
initiate-to ip 173.195.0.42
vpdn-group RAS-VPN
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
l2tp tunnel timeout no-session 15
crypto pki token default removal timeout 0
crypto pki trustpoint TP.StartSSL.CA
enrollment terminal pem
revocation-check none
crypto pki trustpoint TP.StartSSL-vpn
enrollment terminal pem
usage ssl-server
serial-number none
fqdn ssl.spktelecom.com
ip-address none
revocation-check crl
rsakeypair RSA.StartSSL-vpn
crypto pki trustpoint TP-self-signed-1981248591
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1981248591
revocation-check none
rsakeypair TP-self-signed-1981248591
crypto pki trustpoint VMWare
enrollment terminal
revocation-check crl
crypto pki trustpoint OWA
enrollment terminal pem
revocation-check crl
crypto pki certificate chain TP.StartSSL.CA
certificate ca 01
(removed the certificate info for clarity)
quit
crypto pki certificate chain TP.StartSSL-vpn
certificate 0936E1
(removed the certificate info for clarity)9
quit
certificate ca 18
(removed the certificate info for clarity)
quit
crypto pki certificate chain TP-self-signed-1981248591
certificate self-signed 01
(removed the certificate info for clarity)
quit
crypto pki certificate chain VMWare
certificate ca 008EDCE6DBCE6B
(removed the certificate info for clarity)
quit
crypto pki certificate chain OWA
(removed the certificate info for clarity)
license udi pid CISCO1841 sn FCZ122191TW
archive
log config
hidekeys
username admin privilege 15 password 7 1304131F02023B7B7977
username ali password 7 06070328
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 84000
crypto isakmp key admin_123 address 0.0.0.0 0.0.0.0
crypto isakmp keepalive 10
crypto ipsec security-association lifetime seconds 28800
crypto ipsec transform-set vpnset esp-3des esp-sha-hmac
crypto ipsec transform-set strongsha esp-3des esp-sha-hmac
crypto dynamic-map mydyn 10
set transform-set strongsha
crypto map Dxb-Auh 1000 ipsec-isakmp dynamic XXXXXXXXXX
interface FastEthernet0/0
description Internal Network (Protected Interface)
ip address 10.236.5.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
shutdown
no atm ilmi-keepalive
interface BRI0/1/0
no ip address
encapsulation hdlc
shutdown
interface Virtual-Template1
ip unnumbered Dialer1
peer default ip address dhcp-pool ContosoPool
ppp encrypt mppe auto required
ppp authentication ms-chap ms-chap-v2 eap
interface Dialer1
ip ddns update hostname XXXXXXX.dyndns.org
ip ddns update dyndns
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1450
dialer pool 1
ppp pap sent-username vermam password 7 13044E155E0913323B
crypto map Dxb-Auh
interface Dialer2
mtu 1460
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer in-band
dialer idle-timeout 0
dialer string 123
dialer vpdn
dialer-group 2
ppp pfc local request
ppp pfc remote apply
ppp encrypt mppe auto
ppp authentication ms-chap ms-chap-v2 callin
ppp eap refuse
ppp chap hostname hasanreza
ppp chap password 7 070E2541470726544541
interface Dialer995
no ip address
ip local pool webssl 10.236.6.10 10.236.6.30
ip forward-protocol nd
ip http server
ip http secure-server
ip nat inside source list nat interface Dialer1 overload
ip nat inside source static tcp 10.236.5.12 25 interface Dialer1 25
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 172.21.51.0 255.255.255.0 10.236.5.253
ip access-list extended internal
permit ip any 10.236.5.0 0.0.0.255
ip access-list extended nat
deny ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
deny ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
permit ip 10.236.5.0 0.0.0.255 any
ip access-list extended nonat
permit ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
ip access-list extended sslacl
ip access-list extended webvpn
permit tcp any any eq 443
logging esm config
access-list 101 permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
control-plane
line con 0
line aux 0
line vty 0 4
exec-timeout 0 0
login local
transport preferred ssh
transport input telnet ssh
line vty 5 15
exec-timeout 0 0
login local
transport preferred ssh
transport input telnet ssh
scheduler allocate 20000 1000
webvpn gateway gateway1
ip interface Dialer1 port 443
ssl encryption rc4-md5
ssl trustpoint TP.StartSSL-vpn
inservice
webvpn install svc flash:/webvpn/anyconnect-win-3.1.00495-k9.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context webvpn
ssl authenticate verify all
url-list "Webservers"
heading "SimpleIT Technologies NBNS Servers"
url-text "Google" url-value "www.google.com"
url-text "Mainframe" url-value "10.236.5.2"
url-text "Mainframe2" url-value "https://10.236.5.2"
nbns-list "ContosoServer"
nbns-server 10.236.5.10
nbns-server 10.236.5.11
nbns-server 10.236.5.12
port-forward "PortForwarding"
local-port 3389 remote-server "10.236.5.10" remote-port 3389 description "Server-DC01"
policy group policy1
url-list "Webservers"
port-forward "PortForwarding"
nbns-list "ContosoServer"
functions file-access
functions file-browse
functions file-entry
functions svc-enabled
svc address-pool "webssl"
svc default-domain "Contoso.Local"
svc keep-client-installed
svc split include 10.236.5.0 255.255.255.0
svc split include 10.236.6.0 255.255.255.0
svc split include 172.31.1.0 255.255.255.0
svc split include 172.21.51.0 255.255.255.0
svc dns-server primary 172.21.51.10
default-group-policy policy1
gateway gateway1
inservice
end
Gateway# -
DHCP client does not work poperly after systemd and Gnome 3.6 upgrade
Upgraded my system today from Gnome 3.4 to 3.6 (and systemd was updated as well), and since then acquiring an IP address using DHCP does not work anymore.
I am using IPv4 only internally, but neither dhclient or dhcpcd manages to get an IPv4 address.
It seems like IPv6 is priority one, and beacuse there is no IPv6 DHCP server available NetworkManager aborts the whole setup process.
To make sure that IPv6 should not be considered, I have changed "method" in NetworkManager to "Ignore" for IPv6.
I have also tried to downgrade NM to 0.9.6.0 from 0.9.6.4 (since that version works on another, not upgraded, machine), without any result.
Also switched dhclient to dhcpcd, without any result.
The machine is a "pure" systemd machine.
DHCP works for other devices in the network.
Versions:
systemd 195-2
NetworkManager 0.9.6.4
isc-dhclient-4.2.3-P2
I have no issues on a system where following versions are running:
systemd 189-4
NetworkManager 0.9.6.0
dhcpcd 5.6.2
Log: http://pastebin.com/2wMC0JLeThink I have identified the issue now.
Neither dhcpcd or dhclient is sending the host name properly to the DHCP server anymore. I had an IP address reserved in the DHCP server for my host and after deleting this reservation my host is able to acquire an IP (dynamic) address. The reserved static address could never be acquired.
Conclusion: dhclient and dhcpcd is not sending the host name as before, causing the DHCP server to get stuck (while waiting for the host name) whenever a NIC with a reserved IP address is requesting an IP address.
Downgrading the dhcp clients has not yet worked, so there might be some underlying component that is causing the problem. ath5k? systemd? -
Call-Off and Forecast Excel-File does not work anymore?
The Excel-file e-mail sent does not work any more (Excel says: "The following system error occured: .") when opened with Microsoft Office 2010, which I have on my new
computer with Windows 7 Professional x64.
The file is quite important for checking order and forecast quantities retrieved via OLAP-task from 101AS.
Many thanks in advance for your help.
ICT ASKNW
PS: When i use Excel 2007 all work fine. But when i clean Install Excel 2010 it wont work anymore. So but when i upgrade 2007 to 2010 it still working? Can it be true that a
file of the 2007 Edition is missing on 2010? Thanks for your help!Hi Sir,
Would you like to share us the whole error message? The following system error occured:... We need it to check the issue.
If you have any update, please feel free let us know.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
WF initiator in another client does not work
Hi,
I have created my WF and the first step is a user decision (yes/no). In this I use the &_WF_INITIATOR& as the addresse of the WI. It works fine in the development client but not in another client and I wonder why.
When I check the protocol, system is telling me that there´s no agent available which is not true. I see in the container USxxxxxx and I also created an object in the container for passing the user name like USxxxxxxx and nothing. It does not work.
What could the problem be ??
ThanksHi,
I double-checked the task and it it general. I also checked the log for the step and there´s no WFINITIATOR nor WIACTUAL_AGENT.
In the technical details I see that the workflow´s container has the WFINITIATOR with USxxxxxx and in the next step (user decision) there´s no such information nor WIACTUAL_AGENT. Based on this I corrected my WF for passing WFINITIATOR to WIACTUAL_AGENT in the step (using the data flow).
The above does not work. I see now in the technical details USxxxxxx for WIACTUAL_AGENT in the step but the protocol still tells me that there´s to agent.
Any ideas ?? -
Why do you have to open the latest Skype client and continuously logs only then exit after 1-2 seconds. The Windows event log the following:
Event ID: Description:
100 started Skype update
103 Skype update service is shutting down due to idle timeout.
101 Service stopped
I can not use Skype because it has all new clients tried and does not work for months. I once started a few hours after it is confused and began the long walk on the forward end of 2019, has been in the Imprint.
Op. System Win XP
Current Client: 6.22Reverting to the older Skype 6.14.0.104 version should solve the "time-travelling" issue.
http://community.skype.com/t5/Windows-desktop-client/connetion-problems/m-p/3658855#M303470
After installing the 6.14.0.104 version from the provided link make sure to disable automatic updates:
Tools -> Options -> Advanced -> Automatic updates ->Turn off automatic updates
However, you should also try the "fix" provided in this Microsoft support article:
https://support2.microsoft.com/kb/895980 -
10.5 Server iCal + 10.3.9 Client - does not work!
Has anyone an insight, why this is not working together ?
All machines using 10.3.9 have problems accessing my iCal server.
I even cant go to the url using safari:
http://server-name:8008/calendars/
returns 401
Using Firefox however I can sucessful authenticate the user.
Now, since iCal uses webkit to access the DAV resource, I suspect, this OS is unsupported.
Does anyone know a workaround ?Well,
I researched a little and found, that, if you do not run 10.5, there is no way to use iCal with Apples "iCal" server.
(with 10.4 you have access to a calender server, but cannot modify an entry)
In my opinion, this is not acceptable.
Even if this server I bought, was not planned for a groupware application in the first place, I would expect, that the basic features work for clients using an OS not older then 3 or 4 years.
If apple really wants to compete in this place, they have to give the users a working server and client for mail, adressbook and appointments.
If I setup a Microsoft Exchange Server, I can use anything down to Windows NT to access an Exchange server. This is a platform even 10 Years old.
I dont think that it is difficult for Apple to make iCal availible for 10.4 and 10.3 users. Apple simply did not care about it.
This is a reason, why you should not choose Apple as a server platform. Regardless of price or perfomance, because it simply does not work as you would expect.
Nobody would buy a replacement for about 60% of his machines only because iCal needs OS 10.5. This is ridiculous.
Even if only about 30% of the Hardware in this special case actually is not capable of 10.5 it still does not make sense.
Upgrading machines from 10.3,10.4 to 10.5, just to get access to a calendar application for $100/seat - that does not make sense. -
I just installed Adobe CreatePDF desktop printer on a Windows 7 home PC. When I try to use from Word or EWxcel, it does not print. The Adobe print device queue reports an "error" in the status column.
Adobe retired this Feb 17, 2014.
This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account. The user forum for CreatePDF has a DOC that speaks to the app removal.
Be well... -
I use the Smarsh webmail client for my company's email service.
I have been using Firefox in the office for quite some time, and only recently has this issue come up.
When composing emails using the Smarsh client, I cannot format text (using bold, italics, or underline) using the buttons built in to the client. When I highlight text and click a formatting button, the cursor just moves to the end of the line.
Using keyboard shortcuts to edit the formatting works sometimes, but is sporadic (sometimes formatting PREVIOUSLY selected text but not the currently selected text).
I have tried downgrading to Firefox 16, 17, and 18 (as this problem has only come up in the last couple of weeks, and Firefox 19 was release I believe on 2/13), but this did not solve the problem either.Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
I just purchased Export PDF but when I tried it I got a message that it doesn't work on the PDF I need to convert. I need to cancel my order and not be charged.
Cancel the Cloud http://forums.adobe.com/thread/1439535?tstart=0 may help
-
WS Client does not work after redeploy of EJB 3.0 Webservice.
I'm using Netbeans 5.5 RC1 against Glassfish. Glassfish reports this: " Sun Java System Application Server Enterprise Edition 9.1 (build b13)" for version info.
I have a simple Session Bean with the @WebService annotation.
I create a web service client using Netbeans to call the web service, I populate the arguments, and run it, and it works just fine.
If I simply REDEPLOY the EAR containing the Session Bean (via the Netbeans menu), the client will no longer work.
Rather, I get an exception:
javax.xml.ws.soap.SOAPFaultException: Unable to find invocation method
at com.sun.xml.ws.encoding.soap.ClientEncoderDecoder.toMessageInfo(ClientEncoderDecoder.java:84)
at com.sun.xml.ws.encoding.soap.client.SOAPXMLDecoder.toMessageInfo(SOAPXMLDecoder.java:209)
at com.sun.xml.ws.protocol.soap.client.SOAPMessageDispatcher.receive(SOAPMessageDispatcher.java:538)
at com.sun.xml.ws.protocol.soap.client.SOAPMessageDispatcher.doSend(SOAPMessageDispatcher.java:258)
at com.sun.xml.ws.protocol.soap.client.SOAPMessageDispatcher.send(SOAPMessageDispatcher.java:137)
at com.sun.xml.ws.encoding.soap.internal.DelegateBase.send(DelegateBase.java:84)
at com.sun.xml.ws.client.EndpointIFInvocationHandler.implementSEIMethod(EndpointIFInvocationHandler.java:172)
at com.sun.xml.ws.client.EndpointIFInvocationHandler.invoke(EndpointIFInvocationHandler.java:106)
at $Proxy16.acceptPing(Unknown Source)
at javaapplication6.Main.main(Main.java:66)When I run the client a second time, it works.
Any ideas what this may be?A similar bug was reported earlier and it was fixed in SJSAS9.1-b15. Is there a possibility for you to try with some NB5.5 build that has a later AS9.1build ?
-
Excel File read using WebUtil does not work. Gives java.lang.NoSuchMethodEr
We have a form which reads from an Excel File. The form works in development env., but in the live env when we deployed the form it does not work. Form fails @ the 1st call to Client_OLE2 where we set the Excel file to read.
For both the envs. the values are given here:
(1.) Client Forms Version : Forms [32 Bit] Version 10.1.2.0.2 (Production)
(2.) Application Server Version : 10.1.2.0.2
(3.) AS Linux Version : (Live) RHEL 5.7 Tikanga / (Dev) Red Hat Enterprise Linux AS release 4 (Nahant Update 4)
(4.) Client Sun JRE Version :Version 1.5.0 (build 1.5.0_10)
(5.) Client Web Browser & Version: I.E 8.0.6001 or Mozilla 3.0.15
(6.) WebUtil Version: 1.0.6Both envs. are the same except the Linux version.
Works fine in Dev but does not work in Live. Other Webutil functions like file open dialog box works fine in live, only this Excel read is not working.
Full Error message
Java Plug-in 1.5.0_10
Using JRE version 1.5.0_10 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\dinesha.IIL
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
RegisterWebUtil - Loading WebUtil Version 1.0.6
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
Exception in thread "AWT-EventQueue-3" java.lang.NoSuchMethodError:
com.jacob.com.Dispatch.put(Ljava/lang/Object;Ljava/lang/String;Ljava/lang/Object;)V
at
oracle.forms.webutil.ole.OleFunctions.set_obj_property(OleFunctions.java:1216)
at
oracle.forms.webutil.ole.OleFunctions.setProperty(OleFunctions.java:333)
at oracle.forms.handler.ComponentItem.setCustomProperty(Unknown Source)
at oracle.forms.handler.ComponentItem.onUpdate(Unknown Source)
at oracle.forms.handler.JavaContainer.onUpdate(Unknown Source)
at oracle.forms.handler.UICommon.onUpdate(Unknown Source)
at oracle.forms.engine.Runform.onUpdateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown
Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)We connected to Live AS server via VPN and ran the Form in a client machine (where the Dev. is working) but same problem.
Any help would be greatly appreciated.Channa,
I sounds like you might have missed a configuration step on your Linux application server (AS). I recommend you go back through the configuration of your AS and verify each step of the WebUtil Runtime Setup Checklist was completed correctly. Seach the Forms Help system on "Runtime Setup Checklist" for a copy of the checklist.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Why ribbon XML does not work in Excel 2007?
I installed 4 VSTO Excel add-ins on an Excel 2007 PC today. The two that use a visual designer ribbon worked fine. But the 2 that use a Ribbon (XML) did not. The add-in starts ok. But the ribbon does not show. Why would that be?
I wrote two more add-ins to demonstrate the problem. One puts an OK button on the ribbon using the visual designer. That add-in installs on the excel 2007 PC and works as it should. But the 2nd, an add-in that uses Ribbon (XML) to put a button on the
ribbon, does not work. The add-in does not display on the ribbon.
Here is the code of the Ribbon (XML) add-in project. How to get a ribbon (XML) ribbon to display in excel 2007?
thanks,
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Xml.Linq;
using Excel = Microsoft.Office.Interop.Excel;
using Office = Microsoft.Office.Core;
using Microsoft.Office.Tools.Excel;
namespace ExcelAddIn4
public partial class ThisAddIn
private void ThisAddIn_Startup(object sender, System.EventArgs e)
private void ThisAddIn_Shutdown(object sender, System.EventArgs e)
protected override Office.IRibbonExtensibility CreateRibbonExtensibilityObject()
return new Ribbon1();
#region VSTO generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InternalStartup()
this.Startup += new System.EventHandler(ThisAddIn_Startup);
this.Shutdown += new System.EventHandler(ThisAddIn_Shutdown);
#endregion
<?xml version="1.0" encoding="UTF-8"?>
<customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui" onLoad="Ribbon_Load">
<ribbon>
<tabs>
<tab idMso="TabAddIns">
<group id="ContentGroup" label="Content">
<button id="Button1" label="ok" screentip="Text"
onAction="Button_OnAction" supertip="Inserts text at the cursor location"/>
</group>
</tab>
</tabs>
</ribbon>
</customUI>
using System;
using System.Collections.Generic;
using System.IO;
using System.Linq;
using System.Reflection;
using System.Runtime.InteropServices;
using System.Text;
using System.Windows.Forms;
using Office = Microsoft.Office.Core;
// TODO: Follow these steps to enable the Ribbon (XML) item:
// 1: Copy the following code block into the ThisAddin, ThisWorkbook, or ThisDocument class.
// protected override Microsoft.Office.Core.IRibbonExtensibility CreateRibbonExtensibilityObject()
// return new Ribbon1();
// 2. Create callback methods in the "Ribbon Callbacks" region of this class to handle user
// actions, such as clicking a button. Note: if you have exported this Ribbon from the Ribbon designer,
// move your code from the event handlers to the callback methods and modify the code to work with the
// Ribbon extensibility (RibbonX) programming model.
// 3. Assign attributes to the control tags in the Ribbon XML file to identify the appropriate callback methods in your code.
// For more information, see the Ribbon XML documentation in the Visual Studio Tools for Office Help.
namespace ExcelAddIn4
[ComVisible(true)]
public class Ribbon1 : Office.IRibbonExtensibility
private Office.IRibbonUI ribbon;
public Ribbon1()
public void Button_OnAction(Office.IRibbonControl control)
MessageBox.Show("Button_OnAction");
#region IRibbonExtensibility Members
public string GetCustomUI(string ribbonID)
return GetResourceText("ExcelAddIn4.Ribbon1.xml");
#endregion
#region Ribbon Callbacks
//Create callback methods here. For more information about adding callback methods, visit http://go.microsoft.com/fwlink/?LinkID=271226
public void Ribbon_Load(Office.IRibbonUI ribbonUI)
this.ribbon = ribbonUI;
#endregion
#region Helpers
private static string GetResourceText(string resourceName)
Assembly asm = Assembly.GetExecutingAssembly();
string[] resourceNames = asm.GetManifestResourceNames();
for (int i = 0; i < resourceNames.Length; ++i)
if (string.Compare(resourceName, resourceNames[i], StringComparison.OrdinalIgnoreCase) == 0)
using (StreamReader resourceReader = new StreamReader(asm.GetManifestResourceStream(resourceNames[i])))
if (resourceReader != null)
return resourceReader.ReadToEnd();
return null;
#endregionHello Steve,
Most probably you have got an error in the ribbon XML markup. See
How to: Show Add-in User Interface Errors for more information.
I have noticed the following xml namespace:
<customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui" onLoad="Ribbon_Load">
Use the following one instead:
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui"
Also make sure that specified idMso values exist in Office 2007.
You can read more about the Fluent UI (aka Ribbon UI) in the following series of articles in MSDN:
1.
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
2.
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
3.
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3) -
Interface for Excel does not work in Windows 7 - Important
Hi,
Im using BPC 75 MS SP04 with a computer Windows 7, IE 9, Office 2007. Apparently the Excel works "fine", the issue is that whenever I try to access to Interface for web from the main page (clicking the icon) it does not work, does not do anything...
What do you suggest to do?
Working directly in excel is not a problem, accesing to templates vía "Etools - Open dynamic templates" is fine.
The issue is that users that have every access controlled by BPF's (using Interface for Web) cannot work.
Also, we use a template that uses 12 EVDRE reports in the background, we know it is a lot... but it was required like that.
Once accesing to this template vía Etools -Open dynamic template... Excel gets stuck and I have to force it to shut down.
Also Im working with a Vista system, Office 2003.
For this systems, we also use the template EVDRE (12 reports). Once any of both systems access to this specific template, Excel gets stuck and I have to shut it down. Any other template is able to work with, but these 2 machines (7 and Vista) cant.
Please help !
VelázquezHi Velázquez,
Based on SAP Note: 1603248, IE9 is not supported on BPC 7 and 7.5.
So you have to revert to IE8.
Only IE8 and IE7 are supported in 7.5 MS.
Hope this helps.
Karthik AJ -
I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!
cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway.
Maybe you are looking for
-
Elements 12 Will not run only a "SIGN IN" appears
@
-
I am looking for solutions where few portlets/pages can be accessed using WEB, WAP and SMS technologies. Is it mandatory that we need to use/purchase BEA Mobility Server or Mobile Aware server? Is there any other way this could be done with preferrab
-
More than one library on one laptop
I have an original itunes library for my nano and have just set up a new library for my son's nano. Now when I log on I automatically go to my son's library and can't locate my original library. Any suggestions gratefully received.
-
Updating Adobe Reader 9.5.2 for the Mac
How can I update Adobe Reader 9.5.2 when the application is grayed out when I try to select it?
-
Dear experts, I want to substitute withholding tax code RF for RP. I am able to do this via XK99, but I only achieve to put RP in vendor master data, I am not able to massively delete RF from vendor master data. Anyone can help? Regards Claudia.