First RFC call failed, config not loaded. Check the System landscape configuration.

Dear Experts,
We are getting below error on portal while using the BEX query in BI system.
Error:
BEx Web Application
Error: First RFC call failed, config not loaded. Check the System landscape configuration.
Exception occurred while processing the current request; this exception cannot be handled by the application or framework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience.
As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
Kindly suggest me on this issue..
Thanks,
Bharath.

Hi Bharath,
Please go through the below SAP Note and let me know if this helps.
1903392 - Error: First RFC call failed, config not loaded
BR,
Anurag

Similar Messages

Oracle stored procedure call failed,but not captured by the error handling

Hi All,
I have a unix shelll script which calls a stored proc in Oracle, the stored proc call failed due to "ORA-01033: ORACLE initialization or shutdown in progress".
But it is not captured in the error handling block, Any ideas why this had happened?
SQL file had : my_test_sql.sql
exec my_proc(..............);
Unix shell script has this call:
sqlplus -s my_user/my_pwd@db1 @my_test_sql.sql
if [[ $? -ne 0 ]]; then
echo "failed"
exit 1
else
echo "success"
fi
If i execute the above shell, I'm getting the following
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
SP2-0306: Invalid option.
Usage: CONNÝECT¨ Ýlogon¨ ÝAS SYSDBA¨
where <logon> ::= <username>Ý/<password>¨Ý@<connect_identifier>¨ | /
success.
This puzzled me, any pointers?

The $? status variable shows the return code of the last command executed. It will be difficult to determine what the exit status of your sql script is without knowing the script. Do you have any "WHENEVER SQLERROR EXIT" statements in the script?
The ORA-01033 error happens when the database is not open, perhaps in recovery, or startup or shutdown is halted due to a failed or full disk, error in archiving or writing to redo, etc.

Service principal names of user are not unique; check the active directory

Hello Experts,
My company had set up this service principal account to use with Kerberos and I am trying to configure the authentication template using SPNEGO wizzard. The format of the service account is not the same as SAP recommened (J2EE-SID-DOMAIN) but something like abc_de_portal. After trying to use that account with the wizzard I am getting this error "Service principal names of user abc_de_portal are not unique; check the active directory configuration." I am not sure what else in the AD attributes is causing the problem. Please let me know if you have ran into similar issue and how did you corrected. Points will be rewarded of course.
Thank you so much for any help that I can get.

Hello Duy,
SPN of the service user for kerberos has to be unique as you would have made out from the message . There seems to be
someother user having the SPN as yours.
You would have to find the other AD user with the same SPN as yours and then de register that with
setspn u2013d <SPN> Username
Then this error should not come up after that .
There was a tool called Ldifde which you can use for this. We have our AD team do this for us. Would be better if you ask them to carry this out.
Rgds

RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

Hi, All
the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
detail from SM21
The system could not send the data that has been collected automatical
for the System Landscape Directory (SLD). Check whether the gateway
configured in transaction RZ70 has been started and whether the SLD
bridge has been registered with this gateway.
You can use transaction SM59 to check this in the sending system for t
implemented RFC destinations. The RFC destinations have the standard
names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
sending systems. If a different RFC destination has been entered in
RZ70, check this destination instead.
You can use the Gateway Monitor to check the target gateways. In ABAP
systems, this monitor is started with transaction SMGW, or you can use
the external SAP program "gwmon". Check whether the specified gateway
has an active registration.
OF COURSE I checked RFC of SLD_UC and SMGW
any different ideas
Regards
ABH

Hi
Please check the following notes are implemented
Note 906454
Note 907729
You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission
Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
Best wishes
Stuart

RFC call ended with "Communication Failure" exception (Function call failed; could not find the function

Hi All,
I am getting error while executing oDATA service from SAP Netweaver Gateway
Error details:
RFC call ended with "Communication Failure" exception (Function call failed; could not find the function
I am using SAP NG 740
Project is created in Gateway system using SEGW having Map to Datasource option used.
in SPRO manage alias, I had seleted Local App option. Screen attached
I had tried all troubleshooting like delete and add service and alias in "/IWFND_MAINT_SERVICE".
but still getting same error for all service.
Kindly advise.
Regards
Vivek

Hello Vivek,
Service builder would have also generated code for RFC Exception handling to catch exceptions raised when communication fails between your GW and BE for some reasons.
Handling is done for 1. System Failure 2. Communication Failure & 3. Business Failure;
Put a BP in your DPC or DP_EXT class where exception code is written to check what exactly is has caused communication failure.
Check if that RFC is existing in that destination or not.
For your reference : Code would be something like this. Put BP here and check the problem.
* Error and exception handling
IF lv_subrc <> 0.
* Execute the RFC exception handling process
   me->/iwbep/if_sb_dpc_comm_services~rfc_exception_handling(
     EXPORTING
       iv_subrc            = lv_subrc
       iv_exp_message_text = lv_exc_msg ).
ENDIF.
Go inside this method and check to get info on what has to be done to resolve issue.
Check carefully what has gone wrong and fix it accordingly.
No need of adding service & deleting as problem is not because of that.
Regards,
Ashwin

RFC call failed : Error when opening an RFC connection

Hi,
As a result of "Start Data Collection" operation in the t-code RZ70, I have got this error.
"RFC call failed : Error when opening an RFC connection"
Others things are with success message.
Regards,
Bala Raja

hi
check this links
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
also check Tcode: SLDAPICUST.
run tcode SLDCHECK? any error?
Thanks
Rodrigo
PS: If useful reward points

I have an ipad 2 the itunes program worked fine at first but now it will not connect to the store. it says 'secure link to itune store failed' i have uninstalled it and reinstalled it. what do i do

i have an ipad 2 the itunes program worked fine at first but now it will not connect to the store. it says 'secure link to itune store failed' i have uninstalled it and reinstalled it. what do i do?

Doublechecking before proceeding. Is iTunes endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?

Windows Server 2012 Foundation, in a Workgroup - "The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller"...

Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.

Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here?

When turning on my mac all i get is the 1st screen it will not load to the next screen for log in pls help

When turning on my mac I get the first white screen with the apple logo but it will not load to the next login screen

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

Satellite L500 will not load past the 'welcome' screen

Hi,
My Toshiba Satellite L500 laptop will not load past the 'welcome' screen. The cursor thing just keeps going around and around but won't go to my desktop.
Last night it went into some temporary profile and it had a message saying 'your other profile cannot load at this time please try again later'
Any help would be greatly appreciated.
Thanks,
Kara

The error message is not known to me and also searching in google didnt get any hints.
Possibly your Windows OS is muddled up.
Did you try to boot Win 7 in safe mode?
Try this. Restart your notebook, tap the F8 key.
In advanced boot options choose the option called Safe Mode.
If the notebook does not allow booting in Safe Mode, try the option Last Good Known Configuration.
If this didnt help, try Repair my Computer. Here you can choose between different settings.
The one which could solve this is HDD recovery which helps you to set the notebook to factory settings. But this means also that your HDD would be formatted!
So be aware of this!

Flex 2 SWF not loading on the web browser when Flash Player 8 is running

I got a Flex 2 application that is not loading on the web
browser when the users workstations got Macromedia Flash Player 8
installed. Please advice on what could be the issue, i got security
calls included i.e. securty.allowInsucureDomain, crossdomain.xml,
etc.
The application shows no issues on web browsers with Flash
Player 9 installed.

if you have read developersGuide it says that there somewhere
http://livedocs.adobe.com/flex/201/html/wwhelp/wwhimpl/js/html/wwhelp.htm?href=Part2_DevAp ps_048_1.html
here is workaround
http://kb.adobe.com/selfservice/viewContent.do?externalId=749eaa47&sliceId=1
flex 9 is complete rewrite (almost) and its lot mor fast and
effecient) you should't want to use flash 8 if you can anyways, but
somethimes I guess there is not other way out..

Preloader Not Loading Until The Start of Lesson In Captivate 7

I created a Scorm 2004 compliant lesson using Captivate 7. The file size is ~7MB. When I load and run the lesson on our LMS I don't see the preloader until 3-4 seconds before the file loads. I'm staring at a blank screen for about 45 seconds before anything happens. I have the preloader set at 10% but I can't get it to work.
I loaded the file to one of our FTP sites and ran it on an html page and it does the same thing.
Our customers are asking us why there is no indication that the lesson is loading and all I can say is it's a problem with Captivate 7.
I upgraded to 7 because I was told the problem was fixed, but it's still bad.
Any help is appreciated.
Thanks

Yes, it's set to look in the Cp7 preloader folder. I found this on a Captivate website and I think it answers the question.
"As mentioned, preloaders are only really applicable for HTM/SWF output. But what you may not realize is that they will only work if the content is served from a web server over HTTP. Conversely, the preloaders will NOT work if the same content is served up from a LAN server drive over TCP/IP. This is due to the fact that SWF preloaders need to communicate with the server to calculate and show the percentage of file currently loaded. This communication works with web servers, but not with LAN servers."
Unfortunately, Cp7 preloader is going to work on our LMS. I'm going to build a preloader class in Flash and call the Cp7 swf using that.
Thanks for your help
Date: Sat, 18 Jan 2014 00:34:37 -0800
From: [email protected]
To: [email protected]
Subject: Preloader Not Loading Until The Start of Lesson In Captivate 7
    Re: Preloader Not Loading Until The Start of Lesson In Captivate 7
    created by RodWard in Adobe Captivate - View the full discussion
If you still have Captivate 6 on your PC, then make sure that the preloader in this Cp7 project is not pointing at a folder in the Cp6 install directory. It should be using a Cp7 preloader.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6026026#6026026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6026026#6026026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6026026#6026026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Captivate at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Windows 7 and updated firefox window do not load completely . the banner may load or it times out. If I leave it sit for a while it may finish loading. New computer.. cannot figure it out.

I have a new computer with windows 7. I downloaded the mozilla and the update.. now my pages do NOT load completely. the page banner but not the content. or it takes a really long time. When it will not load it say the try again.. and i reload a number of times to get it to load... HELP ME!!
I will include an example below... in the URL blank.
This includes Yahoo and Google...
occasionally it says ...
The connection was reset
The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

My MacBook pro will not load past the grey screen with the spinning wheel. What do I do?

My MacBook will not load past the grey screen with the spinning wheel of death. Anyone have any solutions?

Invoke Safe Mode by holding down the shift Key as you restart. This will do a Disk Utility "Repair Disk" as it starts up (so it takes a few minutes longer) and then load with minimal extensions loaded, and request your login username and password, even if you normally do not use them to log in.
Safe Mode runs the screen using simple, unaccelerated commands. Most things are available in Safe Mode, but things that rely on extensions will not be.
Acomputer that works in Safe Mode, but fails again after you restart, often implicates your extensions and add-ons.

Hi ... Suddenly I have this problem with my iPhone4 . Whenever I am dialling or receiving calls, I am not audible at the other end , but if I am putting phone on speaker then I am audible to other person .Not sure if any setting is changed or device issue

Hi ... Suddenly I have this problem with my iPhone4 . Whenever I am dialling or receiving calls, I am not audible at the other end , but if I am putting phone on speaker then I am audible to other person .Not sure if any setting is changed or device issue. Please suggest or help.

There's an Apple help page on the DNS problem - at http://support.apple.com/kb/TS3408
The first thing to try is changing your DNS settings - and for that you need to open System Preferences, then the
Network section.
In Network - click on Advanced - then the DNS tab
under DNS servers - use the + button to enter two extra lines
either these, from google dns
8.8.8.8
8.8.4.4
or from OpenDNS
208.67.222.222
208.67.220.220
then click OK & then 'Apply'
You would need to do that seperately for the Cable (Ethernet) settings and Wireless (Airport)

First RFC call failed, config not loaded. Check the System landscape configuration.

Similar Messages

Maybe you are looking for