List of Values not showing up

We have BOE 3.1 SP2 with PixPack 2.2 running on Windows Server 2003 R2 SP2 x64
In InfoView, when scheduling a Web Intelligent Report, nothing shows in my List of Values in the Prompts. I hit the Refresh Values button and nothing comes up also.
I'm new in the BO environment so I'm going here and there in the consoles.. I get the same problem when using and AD regular user account or the Enterprise Administrator account.
I checked and added View On Demand for Everyone in my Universes and Connections....
Any help appreciated

Hi Jay,
Can you see the LOV when viewing the webi report?
To see the LOV when viewing or scheduling webi, in "Edit Query" you need select "Prompt with List of Values". And in Universe designer, select "Associate a List of Values" in Properties tab of the object your parameter binds to.

Similar Messages

  • A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

    Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
    I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

    Did you tap "Show older backups" on the Choose Backup screen (see image below)?

  • List of values not properly working in the selection screen.

    Dear Mates,
    In BEx query all the selection parameters are working and showing all the list of values. Created the same report in crystal from BEx query, for one particular selection it is not showing the list of values or drop down. Just showing "DISCRETE VALUES"
    Please throw some light on this.
    Good day,
    Arun S

    Hi Arun,
    I think you have more than one dynamic parameter created in your report.  There is a limitation on dynamic parameter list of values.  You will have to edit the registery to get all values in dynamic parameters list.
    Find below is a knowledgebase article ;
    For performance reasons, in Crystal Reports XI Release 1 and Release 2 the maximum number of values that are returned for a list of values is set to 1000. If you have a cascading List of Values (for example Country > Region > City), the lowest level (in this case City) will only display a maximum of 1000 values. This means that the higher-level prompts may display far fewer values than you expect. The list of values provides the data for the dynamic parameter list.
    How can you modify the maximum number of values available in a dynamic parameter list?
    To increase the maximum number of values available in a dynamic parameter list, you must add a registry key.
    The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe).
    It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
    Crystal Reports XI Release 1
    Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV.
    Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV key.
    Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter. NOTE: The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
    The higher the number of values is, the longer it will take the Enter Values dialog box to populate with values.
    After making changes to the registry, restart the affected service or application as required.
    Crystal Reports XI Release 2
    Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV.
    Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV key.
    Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter.
    The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
    After making changes to the registry, restart the affected service or application as required.

  • Movies are in List view and not showing in Movies view

    When I down load movies, they are appearing in the List view, but are not showing up in the Movies icon view.  How do I fix this?  I'm on iTunes 11.01.1

    Right mouse click on a Movie and select Get Info
    On the options Tab you probably have the value Home Video showing. Change it to Movie and the film will show up in the right place.
    It seems that iTunes assigns it to Home Movies when you import it unless it is explicitly tagged as movie or TV show etc

  • Metadata values not showing in Site Studio layout using Idoc Script

    Hi All,
    We have a SS layout (secondary) with replaceable regions for showing content that is listed in a primary page dynamic list.
    Part of the layout shows contribution elements of Contributor Data File content items, but part of layout also shows metadata values. We use <!--$DOC_INFO.dDocTitle--> to show the content item Title with no problems.
    However, for some content items, some metadata values are not showing on the layout - specifically a custom metadata field called xFinishDate (which is of type 'Date' in Config Man). The code <!--$DOC_INFO.xFinishDate--> simply does not work (nothing is displayed) for some content items, despite definitely having a set FinishDate value. Some other content items show this value fine.
    The <!--$DOC_INFO.dDocTitle--> value works for ALL items, but the <!--$DOC_INFO.xFinishDate--> does not, and there appears to be no difference between the items that it does, and does not work for. They are all CDF, same DocType, same CheckIn profile, etc.
    The non-working items are all released and indexed. Their Content Information in Content Server shows complete metadata. I have resubmitted the non-working items for reconversion in Repo Man but no luck.
    Is there something I am missing? Any help is greatly appreciated.

    Actually the default DOC_INFO resultset that is on the page seems to be for the content item being loaded into the secondary layout's replaceable regions. This is why DOC_INFO.dDocTitle gives the results expected.
    However, I think I have discovered why the xFinishDate value was not showing. Using sapan's code (and modifying it a bit) I was able to print out all the metadata field names and values for default DOC_INFO resultset.
    Using this URL as an example:
    At the top of page region (replaceable) where the Contributor Data File is loaded into, the DOC_INFO resultset is relevant to the content item that is being loaded into the layout (content ID: BD3_011217 - as per the URL format), which is what we want.
    However, throughout the Contributor Data File content, if a link is made using the Site Studio link wizard via FCK Editor (in the above case, it is the position description link, which is a link to a PDF) and the link is 'Link to a file' and the 'Choose Target section' is selected as 'Use default website section metadata', the resulting link looks like "". Any references to the DOC_INFO resultset on the page after the instance of this link now use the metadata of the content item referred to in the link, not the original content item. I have dumped out the DOC_INFO fields/values in different parts of the layout to prove this. The linked content item has no xFinishDate value so this is why nothing displays (displaying xFinishDate needs to happen after the link to the position description).
    I guess I need to either:
    - change the way the link is made to the content item to "Link to the Content Item's URL", but I would prefer not to expose the resulting path e.g. "[!--$HttpRelativeWebRoot--]groups/group-name/@account-name/documents/content-type/content-id.pdf"
    - explicitly make a resultset using <!--$executeService("SS_GET_SEARCH_RESULTS")--> with the content ID I know I want and use it instead of the default DOC_INFO one. Is there any other way to make a resultset comprising of a single item's metadata?
    ■ Description: This is a wrapper around the regular CS GET_SEARCH_RESULTS
    service. It allows some Site Studio features to be specified simply as flags and have
    the real query syntax be constructed on the server. It can modify the standard
    'SearchResults' resultset to contain an additional column called 'ssUrl' which will
    contain the Site Studio-friendly url for all of the search results.
    ■ Parameters:
    – siteId: the unique identifier of the site (required).
    – ssLimitScope: True/False, restricting scope to within the site only (optional).
    – ssUserSearchText: user-supplied search text (optional).
    – ssWebsiteObjectType: object type (optional).
    – computeFriendlyUrls: True/False, modify results to include ssUrl (optional).
    ■ Returns: resultset named ’Search Results’.
    ■ Security: The user must have at write access to at least one security group on the
    content server
    Thanks to everyone for their help. Almost there!
    Edited by: lukeb2112 on 18/01/2010 17:30

  • Billing due List - Net amount not showing for bill type F2

    Could someone please advise me why the net value is not showing on the billing due list for F2 billing types ?
    It is showing for L2, G2 and RE  billing types
    Many thanks for your help and advise

    KIndly check the oss note 445763 and the report  RVDELSTA
    if the above is not working then kindly  use the below logic with the help of ABAPer to update the same
    SELECT SINGLE * from vbfa  where VBTYP_N = ' ' and vbelv = ' '.
    if sy-subrc = 0.
    UPDATE  vbfa  SET PLMIN = ' ' where vbelv = ' '  and vbtyp_n = ''.

  • Non-cumulative Values not showing in Inventory Management Queries

    Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
    I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

    Found the problem.  It had to do with the compression variant in the delta process chain.  The compression was set to 'no marker update'.  Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up.  Reinitalized and the deltas are working correctly now.


    Hi BI Guru's
    I have created a WEB interface for BPS in BI ( version 7.0) .  But when i execute this in internet explorer, I do not get the LIST OF VALUES for Material. 
    When I click on "input help" the system open a new window for "Value selection".  When I specify the material code, it gives me blank LIST OF VALUES.
    But it is working for other fields like Customer, UOM in the same layout.
    Please suggest some solution.
    Nilesh Labde

    Thanks for the reply.
    Master data is avaliable for the Material Code.  The problem is in Internet Explorer and not in SAP GUI .
    If i run Planning folder for the same layou in SAP GUI it is working fine.

  • List Of Values not getting displayed in BI launchpad

    Hello All,
    When i am running the report in BI launchpad, List of values are not displaying . throwing below error.
    Detail Error:
    com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: while trying to invoke the method com.businessobjects.mds.olap.protocol.bics.BICSClient.getCube() of a null object loaded from field of an object loaded from local variable 'this'
    @The same report is working fine in WEBI Rich client.
    I am using 4.1 SPO3 Patch 2
    Please Help on this.

    We are having problem looking like that (After report had been made if I click Refresh button and wait for Values for prompts - the same error message appears).
    My user is in admin group and if log as Administrator - nothing changes.
    Could you give me advice?

  • How to use bind variale to create list of values? show date range?

    Dose anybode have a way to get around "bind variables are not allowed in Select statement" when create list of values from select? I have to create this based on who the user (one parameter passed into report) is.
    Another Question:
    I like to current date and current date-30 days on my report, how to achieve this?
    Any help wil be greately appreciated.

    Hi LC...
    Your approach is good...
    but i said to change the column formula not in criteria...
    but i wanted to done this change in fx of Dashboard prompt (presentation variable) column...
    Of course i appreciate your approach... it was simple ...
    Thanks & Regards
    Kishore Guggilla

  • Filter values not showing on iPad

    I have a BW query based universe (UNV) that is published to iPad. The WebI report runs fine in BI Launchpad. However, when I open same report on iPad, the prompt values are not show (I see only blank Blank Blank) and report is not executed. BW server is BW 7.3 BO is BO 4, SP2.
    How do I fix this issue?

    Hello Simone,
    please can you tell me, if the open document function with refresh parameter is working in BO mobile App V 4.0.3 (Build 1211)?
    In the Release notes for this Version it is described how to do this:
    Open Document
    1. Apart from iDocID, sIDType and sDocName, other document identifier parameters are not supported
    in the OpenDoc URL.
    2. Apart from sReportName, sRefresh, IsM[name] and IsS[name], other input parameters are
    not supported in the OpenDoc URL.
    3. Session management parameter (token) is not supported.
    4. Output parameters are not supported in the OpenDoc URL.
    We tried to use the following link, but the report did't refresh with the correct parameters:
    The Part "Wert=Alarmierung" should be dynamical in future.
    Thank you and regards

  • Ssrs parameter default value not showing ,when available values is binded to query dataset

    I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is  not showing in report preview .
    Many Thanks

    Hi Chandra,
    According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
    In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
    the default values.
    Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Discount value not showing in the P.O printout

    I have created a Service p.o with 5 line items,i have entered the condition type RA01 = 10 % for all the items,
    But in the P.O printout the discount value is showing only for the first 2 line items , the value is not showing for the balance 3 line items.
    Any help will be greatly appreciated.

    if the same condition type is used for previous two line items, then this is ABAP issue. May be smartform coding is restricting to print the value for more than 2 line items. Can you seat with ABAP and check.

  • BCWP values not showing in CNE5

    After executing CNE5 report it not showing BCWP value in particular project only.I have checked all the necessary data like actual dates are maintained.
    What could be the reason.
    Please guide.

    Thanks for reply.
    I've already done that.
    BCWP is not showing only for 4 projects & in other project it is giving correct BCWP value.
    When we generate MIS through BW Module I am getting BCWP graph for the same project whose BCWP not showing in CNE5.
    Thanks & Regards

  • Variable value not showing in sql developer  tool

    I am using sql developer tool. when i take mouse in variable name at debugging its not showing variable value and instead showing variable name data type and owner. but in past i have used sql developer tool where when i take mouse on variable at debugging mode it shows the varable value.  please tell me is there any issue in sql develper tool currently i am using.
    sql developer version

    Sorry - but I doubt if you will get much help for that ANCIENT version of Sql Developer.
    My best suggestion is to download the current version and see if you still have the problem. There have been HUNDREDS of bug fixes since that version you are using.
    Oracle SQL Developer Downloads
    Take note that the current version REQUIRES a much higher JDK version than what you may be using. And do NOT try to install the new version on top of the old one.
    Install the new version into a totally new folder. You will be ask if you want to import your settings from your current version.

Maybe you are looking for

  • Using "Image/Transform/Perspective" on a layer?

    Hi, I'm new at this.  I have a shot of a big room with empty art frames on the walls.  I have rectangular layers that are shots of paintings that I want to drop into the frames, but of course the paintings layers have to be skewed to show the perspec

  •, int) not working in modal JDialog

    Hi I have discovered something peculiar. When I have a JDialog, and it is modal, then the select method of any JTextfield will surely fail. (Only tested on win32) What the owner is does not matter (even null will give the same result). I made a JFram

  • IX4-300D - Drive Status "ToolTip" Not Working

    Hello, According to the manual, when I hover my mouse over a drive in the image in Drive Management, the ToolTip should display the drive model, size, and status, including if the drive is failing.  However, mine does not display a ToolTip?  Is somet

  • Interfaces question

    Hi, I would like to aggregate a table before joining another table. (to join a table with a group by subquery). Is this possible in an interface? Do I have to create a staging table and use another interface to fill it? Thanks, Eyal

  • Metadata query to extract each session run duration for last 10 Runs

    Here is the query:   Select  Subject_Area,Workflow_Name,Task_Name,Instance_Name,Task_Type_Name, Start_Time, End_Time  from (Select  Subject_Area,Workflow_Name,Task_Name,Instance_Name,Task_Type_Name,Cast(Start_Time As Timestamp) Start_Time, Cast(End_T