Maintain excise contion types with basic price in SO

Hello experts ,
I have total 5 pricing procedures for a  30023 customer -- one is general pricing procedure ZPRI01where basic price pr00 and other condition types for discounts and surcharges are maintained. i also have 4 pricing procedures for excise duties and taxes ie., JINFAC,JINDEP, JINEXP, JINSTO... now i want to maintain OVKK in such a way that for document ZOR and customer 30023 , ( after maintaining VK11 )system should show condition types in ZPRI01 and JINFAC or JINDEP or JINEXP or JINSTO....
( for customer 30023 i want to use pr00 and excise condition types jexp .. which both are in different pricing procedures )
Thanks in Advance
Regards
ALI

Dear Sir ,
In short I want to know How can i use condition types of two pricing procedure at the same time for one customer in sales order
Edited by: alisap1000 on Dec 1, 2010 3:13 PM

Similar Messages

  • Purchase order report with basic price and Excise duty values

    Hi All,
    Is there any standard report in SAP to get the Purchase order basic price / qty and its Excise duty values ? Since we are including Excise duties for non - codified items (w/o material master and with cost center 'K') Purchase order and the ed values are added to the cost and the requirement is to see the split up (Basic priceEdEcs+Hcs)for these Purchase orders for the vendors. If there is no std report then please let me know how to link Purchase order table with this Condition value table in query to get the desired report.
    Thanks in advance
    Benny

    Hi,
    there is no standert report to fullfill this requierment
    you have to create this report with the help of abaer
    for that which tax code you are using its importnat thing
    for po table EKPO
    1. A524 (Normal supply point / Material) it will return condition record number for condition type.
    2. KONP (Conditions (Item)) .
    3. J_1IMTCHID (Combination of Material Number and Chapter ID).
    4. J_1IEXCTAX (Tax calc. - Excise tax rates
    5 get the IR no. from RBKP and RSEG, and get the relevant FI doc no. and goto BSET table
    for IR number  to get from table apply logic for doc type RE ,you will get fi number nad in refernce field you will get invoice number + fiscal year
    Map this by refernig on po for which grn and invoice happen
    Regards
    Kailas Ugale

  • Manual Excise condition type with calculation type as FIXED AMOUNT

    Dear Gurus,
    I have used a manual excise condition (JMAN) in my pricing procedure the difference is that I've changed its calcultaion type to FIXED AMOUNT.
    And in the same pricing procedure I have also got a percentage based Excise condition (ZEXC).
    And in any transaction either of the one that is JMAN or ZEXC will be used.
    The Manual Excise condition is used basically when the raw material sale takes place. The requirement is as such that they should be able to enter the duty value in INR and not in percentage. Please go through the example below
    *(For Example I am procuring raw material of 100 kg worth 10000 at 8% of excise duty. Excise duty will be 800 for 10000rs. So it will be 8 rs per KG.
    And now suppose I am utilizing 80 kg for production and want to sell remaining 20 kg. the Excise duty charged should be 160 rs. considering the rate per unit is 8rs.)*
    In this case user wants to enter the value in INR and not in percentage.
    And normally for the finished goods the percentage based condition is used.
    Now what my issue is that how will I copy the value from JMAN to ZEXC at the raw material sale. otherwise my finished good sales is happening without any problem.
    For this should I use any routine to copy the values from ZMAN to ZEXC??
    Or rather is it possible that I could copy values from a condition type whose calculation type is FIXED AMOUNT to other condition whose calculation type is percentage.
    How should I go ahead with this??
    Please guide me.
    Any answers??
    Cant Do it this way??
    Thanks & Regards
    Anand.k
    Edited by: anand k on Jul 8, 2009 6:38 AM
    Edited by: anand k on Jul 8, 2009 1:04 PM

    Check the condtion value in condition type UTXJ . If the JMOD value is 10% of UTXJ then assessable value should have been maintained for the Material and Plant combination in J1ID. This is due to Routine 351 maintined in pricing procedure for the condition type UTXJ
    check and confirm
    Senthils

  • Excise Duty Inclusive in basic price

    Dear Experts,
    when the excise duty is included in the price, we enable the check box MRP Indicator in the excise tab while doing MIGO and based on this the GRN will be posted deducting the excise values from the price.
    but the trouble is, while doing MIRO, the system is not taking the posted value in GRN, rather the basic price plus the excise duty. How to overcome this to that the value proposed by the system is exclusive of excise duty?
    regards
    Suresh

    hi,
    say the value is 10,000 which is inclusive of 1000 excise duty.
    while posting the GRN we will enable the MRP indicator and based on this the GRN value will be posted as 9000 and the 1000 will be captured as excise duty
    but while doing the MIRO, either by giving the Purchase order or Delivery note as the reference, the value proposed by the system is 10,000 and not 9000. I know that we can change the values, but the client requires that the system has to propose the value as 9000 instead of 10,000
    hope it is clear
    suresh
    Edited by: rasuresh on Feb 26, 2010 1:15 PM

  • Activity types with zero prices.

    Hello all
    I'm trying to to assign a cost centre to a work centre. I understand that we need to do the activity type price planning for the cost centre before we assign it to the work centres.
    The situation is, the activivty types are not planned for few cost centres and the prices are not determined yet for those activity types for those cost centres for the moment. I'm trying to do lsmw to load work centres and it would not let me assign those cost centres as there is no activity type price planning done for those cost centres.
    Is there any way that we can create these work centres and assign them to cost centres without actually doing any planning for the activity types.?
    Many thanks

    They need to have prices. Maintain 0.01 just so that you can load your master data.
    Subsequently you can go back and change them to the prices they should be.
    Praveen.

  • Excise Condition Types with validity

    Dear All
    Is it possible to maintain tax conditions with validity periods. for ex: jmop 8% from 1/1/2010 to 26/02/2010....10% from 27/02/2010 to 31//3/2010..If Yes, what tax rate will be triggered for existing open PO's. If the GRPO date is 27.02.2010 or 28.02.2010
    Kindly throw some light
    Regards
    JK

    Hi,
    As per our observations,
    If PO is before 27.2.2010 and GRN on or after 27.2.2010, system will calculate JMOP @ 10% only.(.(Condition Record JMOP-8%-1.1.2001 -26.2.2010) & ( 10% from 27.2.2010-31.12.2010 )
    If GRN Booked before 27.2.2010 and invoice booking on or after 27.2.2010 Cenvat Clearing will be @8% only.(Condition Record JMOP-8%-1.1.2001 -26.2.2010) & ( 10% from 27.2.2010-31.12.2010 )
    IF PO is on or after 27.2.2010 JMOP @ 10% only.
    Experts Pl. comment on this.
    Regards,
    Rajeswari

  • How can i take Basic price value as Net value in sales order

    Hello SD experts,
    I have constructed a pricing procedure, and in that have taken condition type for basic price as rate (cond. type= Price) and have another 3 condition types as surcharges for some internal calculation (but i have to show them in pricing procedure).
    Net value in order is showing a total of all condition types (basic price condition type+ all 3 surcharges condition type's value)
    for ex;
    ZRAT ---Basic Price
    ZMRP-- Mrp/pcs rs.
    ZDOZ--- Mrp/Doz Rs.
    ZTAV--- Total Value Rs.
    in this case, when order creates in pricing net value amount shows total of all condition types above and as..
    Now in this case i have to show only Basic price condition value as Net value in the order.... 
    i am just confused with the subtotal, requirement and calculation form for condition base....(do i need to go for a new routine creation?)
    Could you please help me out and please guide me, what should i do for above situation....
    Any help would be a great....
    Thank you

    Dear  G. Mallikarjun ,
    Put A in the subtotal field against the Price condition type and check.
    If the other condition types (discounts) are for internal calculations, please do as advised by Lakshmipathi.
    check and revert back.
    Thanks & Regards,
    Hegal Charles

  • Material type with No. ranges

    Great day dear pandits,
    I am preparing customer specific config document.
    I wish to maintain the material type with corresponding sl.No.  MMNR will give No. ranges only OMS2 will give material type.
    Precisely, I want material type in one col. and corresponding No. ranges in the other.
    It is possible,
    thanks
    v balajee

    great gudos
    v balajee

  • Excise duty not picking when we enter basic price in contract

    Hi Friends,
    When we are creating contract, we have to manually enter basic price after entering basic price system is not picking Excise duties. But we are doing carry out new pricing that system is picking excise duty. So i need solution from all SD experts.
    I need two options one is when we are creating contract after entering basic price system should automatically pick Excise duty. Or System should prompt that i have to carry out new price. Please suggest how to do.
    Thanks in advance
    Sree

    Use same Excise Con Type based pricing procedure, Wat you might be using for your normal sales order.
    Or you can refer standard pricing procedure foor excise based pricing
    JINFAC     IN:Factory sale (pefer)
    JFACT     IN:Factory sale with formula
    Primarily, maintain Condition Record for Excise Duty Con Type with relevant access seq & tax code in VK11.
    On execution, check plant & S Loc. determination should take place automatically.
    Thanks & Regards
    JP

  • I have an issue with pricing condition ZPRO (basic price )

    Hello gurus
    I have an issue with pricing condition ZPRO (basic price ).
    users created a sales order, and the basic price ZPRO which is mannual is added twice ,now i want to put a check so that condition tpye zpro is not accepted twice by the system. please let me know how can i restrict  system from accepting condition type zpro  twice during sales order.
    regds
    Edited by: sapuser09 on Jul 26, 2011 8:44 AM

    Hi,
    Solution for this is very simple. Don't make any changes to the sales order user exit. Use condition exclusion  for the condition type.
    Do customization in the following path of IMG
    Sales and distribution---- > Basic Functions--- > Pricing--
    > Condition exclusion -- > Condition exclusion for groups of conditions
    First  In Define condition exclusion groups you have to define condition exclusion group (ZXXX)
    Then  in Assign condition types to the exclusion groups you have to assign condition type to the exclusion group (ZXXX   ZPRO)
    Then in Maintain Condition exclusion for pricing procedures select the pricing procedure where you have the problem and click Exclusion box present in Dialog structure box
    You will be faced with Change view exclusion overview screen Click new entries
    You will be faced with New entries overview of added entries screen.
    Take serial no as 10 Condition exclusion procedure  as B (Best condition with in condition type) In the exclusion group1 add the exclusion group ZXXX.
    Save it and create order.
    In the order pricing you will again observe that ZPRO appearing twice but only one will be active.
    Changing user exit for this issue is not at all required and it must be only the last resort Try replicating the issue in your sand box system. As I had mentioned it will be picked twice but only one will be active.
    Hope this helps.
    Edited by: mokirala tilak on Aug 10, 2011 10:19 AM

  • In Standard report VF05n under Net value system shows Basic price + Excise

    Dear Team,
    In Standard report VF05n under Net value system shows Basic price + Excise n' Taxes. where as i required only Basic price in that column and Excise and Taxes separately  in separate columns.
    Plz, Suggest
    Thanks
    Gaurav

    Hi Gaurav,
    The netvalue in this report comes from the invoice, which in turn determined by your pricing procedure. If you want only the basic price to be your net value, you have to adjust the same in your pricing procedure. But this is not advisable, as there are other price components also in your pricing procedure, rather you can develop a new report with the required details for your requirement.
    Regards
    Vijay

  • Pricing : Discount on basic price and excise duty

    Hi gurus,
    I want to give a discount based on sum of basic price and excise duty.  But Excise duty is captured only in tax.
    In this case how to give the discount based on the sum of basic price and excise duty since excise duty is not in the pricing procedure.
    Regards,
    vimal

    Hi,
    Add Excise condition in pricing procedure in rquire step.
    reward if helpful,
    Regards,
    Chetan.

  • Functiopn module associated with basic type of idoc without process code

    can i know the function module assciated with basic type of idoc if i do not know the process code for the same

    hi saurabh,
    download.oracle.com/docs/cd/B10464_05/integrate.904/b10299/intro.htm
        CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
          EXPORTING
            master_idoc_control                  = wa_edidc
          TABLES
            communication_idoc_control           = it_edidc
            master_idoc_data                     = it_edidd
      EXCEPTIONS
        ERROR_IN_IDOC_CONTROL                = 1
        ERROR_WRITING_IDOC_STATUS            = 2
        ERROR_IN_IDOC_DATA                   = 3
        SENDING_LOGICAL_SYSTEM_UNKNOWN       = 4
        OTHERS                               = 5
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.
    ENDIF.
    ENDMETHOD.
    i think this will help u
    regards,
    sindhu.

  • Pricing procedure mm Packing and forwarding to be calculated on Basic price

    Hi experts
    we are having one pricing procedure where in details are as follows.
    basic price                                                 100
    excise                                                           12.36
    total                                                             112.36
    P & F 2 %  0n (112.36)                                   2.24
    total                                                             114.60
    Vat 5 % 0n (114.60)                                       5.73
    Grand total                                                   120.33
    Now we require new pricing procedure wherein  Packing & forwarding to be calculated on basic price & not on basic + excise
    so can we change in same pricing procedure or we have to create new ?
    Can you elaborate with the  configuration steps ?  Any changes required in Tax procedure also or not ?
    Thanks in advance
    regards

    Hi,
    No need you can add the condition type to the pricing procedure at spro--mm---purchasing--pricing procedure ---calculation schema with proper calculation to get the percentage on base price and add to the total .
    Regards,

  • Basic price PB00 should not  be changed in PO

    Hi Friends,
    I need your help to solve the following issue
    The requirement is, if the Basic price PB00 is flown from info record to PO , then Buyer should not have option to change the price in PO.
    I made following setting but my requirement is not met
    For Condition type PB00 , I made “B-Automatic Entry has priority” in customizing , for  PO  “Net Price” I made the filed as “Display only”. While creating PO the price maintained in Info record is flowing and I am not able to change the price. That is fine. But  when I select manual basic price condition type PBXX and give the value then system is taking the value in PBXX which I do not want . The price flown from info record should be the final price. (if I maintain the PBXX also as ”No manual entry is possible” then  buyer can not select PBXX . But I want PBXX with manual entry as priority)
    Request your help to find a solution to this issue   
    Thx
    Deva

    Hi,
    In Info Record, you can maintain the required condition (PB00 / PBXX) & then click on 'Details' icon. There you will find the upper & lower limit. You can maintain both the limit values same as the basic condition. This will ensure that the user will not be able to change price in PO.
    Further you may restrict authority of Maintaining Info Record, so that the buyers will not be able to access & change Info Records.
    Regards,
    Prashant Kolhatkar
    - Reward points if answer is helpful.

Maybe you are looking for