Maintain order at runtime not working for MDM in PI 7.31

Hi All
I have and one outbound and 5 inbound interfaces all going to MDM system
first one is import and next 4 are webservice calls to MDM multiple times but the mapping changes for each.
So I kept 5 different operation mappings for 5 inbound interfaces and maintain order at runtime in receiver interfaces
The first one import if fails in MDM due to value exception or any exception, MDM PI adapter is not catching that and the other interfaces are executed
So the maintain order at runtime is not useful in my case. do we know why is this behaviour? can we make sure the import is successfully completed before the next interface execution using maintain order at runtime?
thx
mike

Hi Mike,
I'm not sure if this is still relevant or even up to date. The MDM adapter is/was nothing more than the old file integration with enhanced audit log. So, unfortunately, it will tell you all about the import successes and errors in the audit log, but it will not change the message status accordingly. Regarding message status it still behaves as if it was a file receiver adapter stopping transaction at file system level. In my opinion, this is not very helpful, and scenarios like yours cannot be implemented using standard tools. You can't even use the standard monitor to check whether normal distributions worked. You'd have to check the audit log of every message. Or check the file system directly or read the MDM log, as before.
I hope they improved that in the meantime.
Regards,
Jörg

Similar Messages

[JS CS5] Re order pages script not working for me

Hi, I'm attempting to use the reorder script marked as the answer in this post :
http://forums.adobe.com/thread/519470
My problem is that when it reorders the pages, it puts them all into one spread and errors once it reaches 10.
Some details on what I am doing -
It's an 18 page document, reorder is as follows:
1,2,4,18,17,5,6,16,15,7,8,14,13,9,3,10,11,12
Currently it's in spreads, but even when I turn off facing pages, move each page by itself and turn the master into one page, I still have the same error. I've been fighting with this a while, I've tried each of those by themselves as well.
In case you are curious about the order - this is a booklet, but the middle signature is 3 pages. I'm attempting to create a script that will take it from reader to printer spreads as "print booklet" will not work because of the 3 page signature (extra page is a fold out on finished product).
I'm fairly new to scripting and feel it must be something obvious I'm just missing.
Thank you for your time!!

@Krista – I suggest you ask in the thread you are pointing to with your link.
No need to split the thread into two.
Now to your problem:
if all the pages end up in one spread it is no surprise that you get an error after page 10. The maximum page count of one single spread is 10.
Why do the pages go to one spread?
It's pure speculation, but I think it has to do with some preconditions your spreads are in.
Check for "Allow Document Pages to Shuffle" and "Allow Selected Spread to Shuffle".
Is "Allow Selected Spread to Shuffle" "off" or "on" for the particular spread where all pages are added?
And another question:
what is the particular script you refer to? There are a couple of scripts in this thread from various authors.
Uwe

SD- Sales Order - ATP check not working for few item in same sales order

Hi Experts,
Need help we activated ATP check but for few item i could not find confirmation qty after availability check. In same SO out of 4 items for schedule line it confirming qty for 2 item but it's not confirming for remaining 2 items though stock is available. Please guide me how to correst and what need to check.
Manoj

Dear Manoj,
As you know, ATP is a big subject & some times its difficult to point the exact problem.
In your case, I suggest you to execute the function module:BAPI_MATERIAL_AVAILABILITY using Tx:SE37
key in selection criteria , in results check the "ATPQTY"- it will show you how much actual stock is available for use i.e. ATP qtty.
still if you find the availability & system not confirming the qtty, then problem could be in checking rule
Tx:OVZ9 check in relevant combination, whether you are considering RLT or not?
is this case with MTS or MTO
because in Sales order -
for MTS - checking rule "A" & MTO checking rule will be "AE"
Regards,
Reazuddin MD

Recovery media kit order web page not working for Canada site

The laptop crashed (Pavilion G6-2288ca with Windows 8). I'm planning to replace the hard drive. I want to order the recovery media kits from hp but the Canada site is not working. After I entered the postal code, the site says it is temperarily out of service. I tried the same on the US site with a pretended zipcode and it worked fine. Can someone please help?
Thanks.

Try phoning HP Support. 1-800-474-6836
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

LSMW For Converting Open Sales Orders (not working for more than 1 item)

Hi,
I am using following standard object for Open sales orders .
Object               0090   Sales documents
Method               0000
Program Name         RVINVB10
Program Type         D   Direct Input
Its not working for more than 1 line item.
For more than 1 line item its giving Error saying that
'102122                         V1                   845
Print parameter SAPML2 1 is not defined
Can anybody help me out in this regard.
Thanks in advance.
Nitin.

hello, friend.
i will still research the subject. but the first thing that comes into my mind is t-code VA05. with this, you have the option to change the Plant en masse. so a possible workaround is for you to list a number of sales orders using VA05. you then sort the line items by Plant. choose all items with the same plant, change the plant via mass change... then change back to the original plant. hopefully, the new settings should apply.
do test a few sales orders by doing this for a larger scope.
regards.

VF06 not working for drop ship orders

Hi All,
We use VF06 for creating billing docs. Interesting it works good for all order/delivery types but does not create any billing document for third party sales orders. I have flagged both - order related and delivery realted document indicators and leaving all the selection inputs blank except for the sales org. When we try to create the invoice for a drop ship order, it gets created but surprisingly does not get picked up in VF04 or VF06.
Any help would be appreciated.
Thanks & Regards,
Vidya

Hi,
I did go through some notes and could find out the problem. In copy controls we have set the billing quantity to F to enable billing even if GR is done for the PO and need nt have the Vendor Invoice Recipet to be done. SAP says in some notes that if this is set, then the billing due list will not have the order displayed even if it can be manually invoices. But I dont have any idea how to overcome this. SAP has provided standard reports but somehow these reports are not working for me.
Thanks & Regards,
Vidya

Defaulting Rules Not Working for Repair Orders in OM?

Hi,
Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
But in our project we are using Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
Please help me to solve this issue ASAP.
Thanks,
Kishor

Hi,
You have like this:
1. Price list
2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
You have to make
1. XXOE_DEFAULT_PVT.custom_code
2. Price list
3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
Did you made own custom code to pick currency?
Regards,
Luko

Cascading Select Lists - Not Working for me

I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
     select state_code || ' - ' || state_desc d, state_code r
     from tbk_state
     where country_code = :P6_COUNTRY_CODE
     order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?

Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti

MN04 not working for free text PO

Hi All,
I have maintained a condition record through MN04 in purchase organisation, company code and vendor combination. This condition record is working fine for regular purchase orders. But it is not working for free text PO's. Could you please guide me why is it so?
I am maintaining same purchase organisation, company code and vendor combination for free text PO also. Question is why it is working for a purchase order with material inside it and why it is not working for purchase order with out material.
Thank you all in advance

Hi,
Seems you are using a custom print program and form. I would suggest to change the program to SAPFM06P, form routine as "ENTRY_NEU" and the form as "MEDRUCK" in NACE transaction for the output type and check the scenario again. Also cross check the settings with the KBA: 1829682 - Output type is not determined in Purchase order
If its getting triggered, then check the custom program and the form with the help of technical team.
Regards,
AKPT

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Order Reason ABC not defined for Order Type Retrun order

Hi
I am getting following " Message no. V1 899 " when i am doing return order without refernce .
Order reason is defined in customization but still we are getting the following message " Message no. V1 899 " /Order Reason E18 not defined for Order Type ZEF9.
Can any one help me
regards,
kiran

Hi Kiran
As you have created sales order with document type ZEF9 but you have not taken any reference document then go to VOV8 and select ZEF9 and maintain the order reason feild and then do the process
Regards
Srinath

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion? Best, James.

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion?
Best,
James.

you cannot use your pc license to install on a mac. you would need a separate license (and serial number) for that.
adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party.

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

I'm running OS X Yosemite, Version 10.10 My Adobe Illustrator CS6 is not opening. I have install the legacy Java SE 6 runtime, not working

I'm running OS X Yosemite, Version 10.10 My Adobe Illustrator CS6 is not opening. I have install the legacy Java SE 6 runtime, not working
Also when I click on More Info... button I I get support.apple.com website page, which is blank. When I click on the OK button, same result.
I need help with this, is anyone out there experiencing the same phenomena?

How about this one
Apple Java for Mac | MacUpdate
or
Java for OS X 2014-001

HT4946 My sound is not working for Siri, voice mail, Itunes,and ringer tones... the only sound that works is the buzzer. I was told at Verizin to try and update my I tune app off my Home computer and that might make the sound , will this help or is the sp

Sound is not working for Siri, voice mail, ringer tones, movies or music. I was told by verizon that the speaker maybe out, but that i might want to try and reload or update my itunes by plgging into my home computer... will this help and if so how do I do this?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Maintain order at runtime not working for MDM in PI 7.31

Similar Messages

Maybe you are looking for