Re: Excise Invoice

Hi Guru,
i have posted Excise Invoice. but in that i have done some error.
now i want to reverse it. In J1IEX there is a option concel. while i am using that option system says that Excise Invoice posted for this vendor.
Please give the valid information. it is very urgent.
Thanks
By
Siva

Hi Guru,
This my sequence of operation.
intra company stock transfer.
1. purchase order with UB. (from plant A)
2. Delivery ( from plant B),
3. PGI ( from plant B),
4.Excise Invoice ( from plant B to A),
5. Billing ( from plant B),
6. Creating Excise Invoice Manually (from plant A), while creating the Excise invoice without purchase order.
after PGI and Before MIGO.
7. MIGO.
Now i want to concel the Excise invoice in Plant A.
kindly provide the valid information.
an i concel that invoice like the following way.
1. in the J1IEX Display mode, in RG23A Part II. double click in accounting Document. click the concel accounting Document.
enter the reson for rejection. Now concel document get posted.
2.then concel the MIGO Document.
3. Post the concellation Document by using J1IEX.
Is ok to do concel the Excise invoice document.
if i am post that i got the following error.
Excise invoice 2460038662 2008 has already been posted for vendor 400231.
kindly help me out to solve this issue.
While
How to I cancel the excise invoice without purchase order.
Thanks
Siva

Similar Messages

Depot excise invoice is open and delivery is cancelled.

Dear Friends,
User has created depot excise invoice (commercial invoice not created), but later he has rversed the PGI and cancelled the delivery document. So now how to cancel the depot excise invoice. Because system is asking for the delivery doc. number but the delivery doc. number was cancelled.
And also please tell me how to block if excise invoice is created system should not allow the user to reverse the PGI (only when the excise invoice is cancelled then only it should allow to cancel)
Please tell me the process how to resolve it.
Regards,
Sreehari
Message was edited by:
Sreehari Kondapalli

Hi,
There is no standard procedure available to cancel this as you have already cancelled the Delivery, you will have to write a ABAP code to correct this entry in RG23D table.
Regards,
Murali

Excise Invoice number and Internal Number

Hello Friends
I have some queries ,I will be thankful to you if you could guide me, in understanding themu2026
1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
Thanks
Siddharth

1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
-->> Ex inv nbr will be entered based on the vendor ex invoice .. this is external nbr assignment
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
--->> there is no relation between grpo vs. ex inv nbr
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
>> u can see in J1I7 or thru table J_1IPART1
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
>> wait for others answers..

Excise Invoice at Depot for Initial Inventory Uploads

Hi,
>we are rolling out a new plant for which we have old stocks which were done with the Movement type "561".We want to do Excise invoice at depot using the T.Code J1IG.but we dont have corresponding excise invice at Factory.Please advice is there any Business process available to bring the initial inventory.
Thanks and Regards,
Nambi.N

Hi Nambi.N
To upload the initial stock / update RG23D during initial stoc we need to use the same t-code j1ig or we can develope a BDC for the particular t-code.thats the practice we are following.
Best Regards
Nishant

Is Excise Invoice required a Service

Dear All,
We are preparing Sales order for "Services".
With reference to the sales order. we are generating Billing Document.
But, when I am trying to create "Excise invoice" (J1IIN), it says "Reference document of 12193268 is not delivery document". Error message number is 8I68.
Kindly clarify whether "Excise invoice" is required for "Services"
Regards,
Mullairaja

Kindly clarify whether "Excise invoice" is required for "Services"
No. Only if any product physically moves out of a manufacturing industry, an excise invoice is required. For service, you should levy service tax.
thanks
G. Lakshmipathi

Depot Plant : Supplimentory Billing and Excise Invoice to customers

Hello experts,
We have depot Plant.
Purchase material from vendors and salling to customer.
same Capturing excise in J1IG and Passing through J1IJ.
its working fine.
my question is, vendor is providing Supplimentory Bill.
We are capturing additional excise through J1IGA- with ref. certificate A
How to raise the supplimentor Invoice to Customer with captured additional Excise through J1IGA.?
Regards,
Appasaheb

Hi,
You can select the additional invoice from the Excise Invoice tab in J1IJ.
Apply this note to get a warning if available additional Excise invoice is not selected.
1514324 - Selection of Addl Excise Invoice skipped by user in
J1IJ
Regards
Binoy

Excise Invoice and RG Registers

Hi SD Guru's
My client is into Electrical installation services , I would like to know whether Excise invoices and the RG registers are need to be updated.
The nature of business of the company is procuring trading material from the vendors and do the installation, testing and commissioning and raise the invoice. so for some of the material which they procure have Excise Duty and where as the output taxes are VAT and CST only.
I would like to know whether I have to configure CIN details and what are the registers to be updated.
Thanking you all for your kind help.
Rgds

Dear Friend,
I am also with a client whose business is Electricial, Mechinical, Plumbing & Fire Fighting Installation services.
The business process is exact same as the process explaned to you.
Here we dont not update any Excise registers because we dont claim the Excise duty paid in Purchased goods.
The only Taxes applicable here are CST, VAT & Service Tax.
When we Purchase goods, the Excise Amount is shown seperately in PO Conditions but the value is updated in Material Cost. Only the Purchase / Sales taxes are posted in seperate GL accounts & VAT returned is claimed.
Thus in your case too I feel no Excise Registers updation is required.
Hope this helps...
Thanks,
Jignesh Mehta

Excise invoice and domestic invoice sharing same number range

Hi,gurus,my question is addresed to the sap cin gurus
Scenario:-- Normally sap has provided provisions that the domestic invoice and the excise for the export will have different number range object
Transaction-snum or snro(As per the rule the no range has to be approved by excise authorities)
Requirement:--The present requirement of the client is that as per their requirement they will be using the same excise number range both for domestic and the export(They have got the approval from the excise department as per the amendment,that specifies the same)
so i request you to pls guide me as how can it be done in sap that two different business process will share the same number range.
as per my knowledge local excise number range is-J_1IEXCLOC
and for exports is-J_1IEXCEXPand the both will use the same number range and,suppose 1 local invoice is created and say if the no is 1,then if the export excise invoice is created the number will be 2,pls guide me how is it possible that the same number range should be used.
Thanks in advance---Anshuman chakraborty

Dear sir,Thanks for attention towards the issue,but still i need to clarify some details-
the number range forJ_1IEXCLOC are already configured .It is not the case like i have to configure it for the first time however ,so the issue remains how shall i proceed in this case
Sir,i have already checked the transaction j1iin,it does not give any such box to check the-use local no range
infact the error message which the system was throwing to the user that-number range object not assigned for Object: J_1IEXCEXP.
The question remains from my side is what are the complete configuration steps I need to do ,to make the check box appear so as to select-use local number range,and is there any thing to be conveyed to my developer,so that the same appears,
or is it the case like the anything should earlier have been done before the number range for J_1IEXCLOC was created.i would request u to pls guide me giving the complete details of the step to be followed.
Thanks in advance
Anshuman chakraborty

Excise Invoice Tab is not display in MIGO for Cancelled document

Hi,
We are execuating the incoming excise cycle then in MIGO and J1IEX.It is perfectly working.But in case of cancellation the excise tab is not dispplaying in MIGO.We are using option "Only Capture and Both Capture & Post".Whatever the excise captured and Posted , it is updated in Excise Invoice tab in MIGO.
As per my understanding the excise tab should come for cancelled doucment also.
Regards
Rajev

Hi,
You are correct it won'y come for 102 but it will come for 101.But it is not coming for 101 .It is not coming when we cancelled the document.
but it will come for 101
.But it is not coming for 101
can you explain your statement ?
If it is not coming for 101 movement type
check following point
1) tax code in PO ,all excise condition should be there
2) Maintain chapter ID material combination in J1ID
3) Maintain Vendor and Plant excise details in J1ID
Regards
Kailas Ugale

Excise invoice posted and paid but stock is yet to removed from Warehouse

Dear All,
Please provide solution for given below issue,
1.Invoicing was done in 09.09.2009 and excise invoice has also been posted and paid to Govt. but the material is still lying
   at our works as consignee was not having valid road permit.
2.Now the consignee has been changed but sold to party is same and the road permit is also available
3.Excise duty revised to 10.30% from 8.24% and the new price breakup has been provided by the customer as per new
    duties/tax rates.
Please suggest the best way to handel this issue.
Regards
AJIT K SINGH

>
AJIT K SINGH wrote:
> Dear All,
>
> Please provide solution for given below issue,
>
> 1.Invoicing was done in 09.09.2009 and excise invoice has also been posted and paid to Govt. but the material is still lying
>    at our works as consignee was not having valid road permit.
> 2.Now the consignee has been changed but sold to party is same and the road permit is also available
> 3.Excise duty revised to 10.30% from 8.24% and the new price breakup has been provided by the customer as per new
>     duties/tax rates.
>
> Please suggest the best way to handel this issue.
>
> Regards
> AJIT K SINGH
Take help of excise or tax consultant,based on their advice you can proceed further.
Either you have to revere all postings from excise to sales order.
Maintain new pricing in condition record.
Complete sales cycle including sales invoice with new price.
Create excise invoice.
For excise duty payment seek help of excise or tax consultant

How to create excise invoice with refer to Delivery Note

Hi SAP Expert,
I am doing STOCK Transport process from factory to depot and hitting error while creating excise invoice in Factory.
From SAP help on Creating Excise Invoice, it said :
From the SAP Easy Access screen, choose Indirect Taxes ® Sales/Outbound Movements ® Excise Invoice ® For Sales Order ® Outgoing Excise Invoice Create/Change/Display ®
If you want to create the excise invoice with reference to a pro forma excise invoice or commercial invoice, choose Excise Invoice ® Create.
If you want to create the excise invoice with reference to a delivery note, choose Exc. inv. for delivery ® Create.
Enter the number of the reference document.
- When i created the excise invoice with reference to a STO Delivery Note, i am getting error : " For delivery 800050092 no document of type JEX exist "
- I already setup the config to assign Delivery Type NL to billing type JEXP.
I was doing the steps as below :
1. ME21N u2013 Create Stock Transport Order
2. VL10B u2013 Create Outbound Delivery w.r.t. STO
3. J1IIN u2013 Create Outgoing Excise Invoice w.r.t. Delivery Note
- Anything that i am missing ?

Hi Guru,
Thanks for your reply. It is my typo error. I have maintained the delivery type NL to billing type JEX, instead of JEXP
I am getting error :
For delivery 800050092 no document of type JEX exist
Message no. 8I320
Diagnosis
The excise reference document defined does not exist for the delivery.
Procedure
Create the excise reference document before running the excise posting transaction.
- What is it means by create the excise reference document before running the excise posting transaction ? Do I need to create Pro-forma invoice prior to execute transaction J1IIN ?
I did not check the selection for ": Excise Inv during Billing " in my Excise Group maintainance.

Single Excise Invoice for Multiple Return Delivery

Suppose we have multiple number of material documents against a single PO and the excise invoice posting has been done. After quality inspection the material gets rejected and we create a return delivery using 122 movement type. In this situation, is it possible to create a single excise document for all the return delivery documents ?

Can you spell out clearly whether you are talking about sales return or vendor return ? If it is for sales, please let me know whether the materials were left out or not.
G. Lakshmipathi

How do we raise Incoming Excise invoice on Vendor1 and A/P Invoice on Vendo

Hi All,
How do we raise Incoming Excise invoice on Vendor1 and A/P Invoice on Vendor2 for a single purchase order?
The Scenario: PO is raised on Vendor2 for certain goods excisable and Vendor2 is not registered under Excise hence i cannot get Incoming excise invoice from Vendor2 or I cannot raise Excise invoice in B1 on the name of Vendor2.
But
the same goods (which are excisable) were already supplied by Vendor1 to Vendor2. So here the excise invoice is coming from Vendor1 and A/P Invoice from Vendor2 how this is actually handled in Business One? How do we show the A/P Invoice amount due on Vendor2 and the Excise Passed from Vendor1?
Thanks
SV Reddy

Hi Thanga Raj,
what you said is works only for payment consolidation. where in a particular purchase two vendors are involved, the tax updates should go into relevant vendor master data. in the above case excise is updated in the vendor1 account and RG23 also should be generated on the name of Vendor1.
Since you already raising incoming excise invoice on the name of Vendor1 you also need to raise A/P Invoice on Vendor1 (this is mandatory, from the goods receipt PO when you click copy to Incoming Excise Invoice and A/P Invoice the system automatically inserts "Vendor1")
but how do you update the Vendor2 account only for the A/P Invoice VAT portion. Because in reality the VAT you are paying to Vendor2 since you need to raise the a/P Invoice on the name of Vendor2. it is not actually happening in business one. If you try to raise A/P Invoice on Vendor2 from this Goods Receipt PO, initially the system copies Vendor1 from GRPO and if you change and try to add the invoice on Vendor2 name, the system will ask you to create a serial number again if the item is excisable. here the work is duplicated for the same item you already created a serial number while you creating the Goods Rectipt PO from Vendor1.
Any body knows any other scenario please help me.
Thanks
SV Reddy

Settings for capture excise invoice in MIGO and other settings

Hi,
For excise invoice capture and post procedure which we are following is as follow
1 : For Local Excise invoice
     After receving goods from Vendor first we are Doing J1IEX Part 1, Capture excise invoice after saving this we are getting part 1 number, then we are making GR with MB01 ref. to part 1 number , then qyuality inspection then updating material in Unrestricted stock from quality afetr that we are doing J1IEX poat PART 2 here we are getting part 2 number then invoice verification,
2 : For import PO
      First MIRO for custom delivery cost we are getting MIRO number, then J1IEX part 1 ref. to MIRO number and year then MB01, ref. to part 1 of J1IEX then quality quality to store then J1IEX Part 2 then MIRO for vendor.
now in many thread i read about capture invoice in MIGO   so i want to know the detail settings which required to be made so that we can perform our ruoutin in short time.
regards,
zafar

hi
>is there will be any effect in our existing procedure We want to follow both for some time , after that we will do only in MIGO,
yes u can use both simultniously
but in MIGO if u capture, the step of updation J1i5 will be ommited (it will take palce automatically)
like currently ur doing capture >update >post
in migo only capture and then post
>second think is that now while posting the capture excise invoice in J1IEX we rae entering part 1 number, so can we do woth >this while capturing it thorugh migo or we have to post with vendor excise invoice number only.
You can do capture and post simultaniously in migo only
the separate transaction is given as persons or users may be diffrent for GR and excise
if the same user want to do the GR and cap and posting then yes he can
for capture and posting u also have to tick Post Excise Invoice Captured in MIGO in excise grp settings
regards
kunal

Can we change billing doc without cancelling( excise invoice is subsequent)

Dear all,
Here is a urgent issue
One Excise invoice has been created with reference to a billing document
and we have not maintained tax code in that condition records so it is not allowing to release the doc for accounting entries
now my requirement is without cancelling the excise invoice and also not to do transaction J1ih,( to create excise JV for direct GL entries
i want to change the billing document
Thanks in advance

have not maintained tax code in that condition records
While it is not necessary to reverse the excise invoice, the fact is that since tax code was not flowing in billing document, I am sure, excise duty would also not be flowing, in which case, your excise invoice is also generated for wrong value.
I would be surprised if you say that excise values are flowing in billing document and also in excise invoice and if your issue is only tax, then as already suggested, maintain a condition record (with the date in line with pricing date in billing document) and try.
G. Lakshmipathi

Userexit For TCODE J1IJ depot excise invoice

hi
I want to know is there any userexit for depot excise invoice. That we can use to check weather excise entry date that is (J_1IRG23D-CPUDT) is equal to likp-WADAT_IST . Any info will be really helpful.
Thank you

Hi,
Use this program SAPMJ1IJ in this program there are 4 includes.
First try with MJ1IJF01
So check with your abaper which exit is working in this include.you can do it by setting break-point.
Also check other includes MJ1IJTOP MJ1IJO01 MJ1IJI01
Thank you,

Re: Excise Invoice

Similar Messages

Maybe you are looking for