Remove eprint job with HP Connected

Hello,
I'm really disappointed. I have launched a job with google cloud print by error (around 200 pages of a document).
I just want to remove this job in ePrintCenter.
ePrintCenter redirect me to HP Connected new website but I don't see in the UI any page to remove jobs.
How can I remove an ePrint job with the new HP Connect website ?
Thx in advance for your help
This question was solved.
View Solution.

Hi xblaster. The new HPConnected site has print jobs managed in the “Collections" tab. Before you can make use of it, you will receive an email from HPConnected asking you to confirm your email (orange button). This authorizes you to delete and reprint jobs. If the job is still stuck in the queue, you will have to wait until the job reports ‘failed’ before being able to actually remove it.
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

EPrint problem with CP1525nw - connection error

I just installed a CP1525nw in our home network. It's wired, and we can print and access the printer's web page from every computer - no problems with local printing.
However, I'm not able to successfully complete the ePrint setup. When printing the information sheet using the control panel, I quickly get the message "Connection Error, Check Connection", and it asks me to hit 'ok' to return to the main menu.
I am able to turn ePrint on and off, as well as enable and disable ePrint, both from the printer's webpage as well as the front LED menu. Each time I toggle the latter, I get a new email address. This successfully displays in the printer's LED window, so I know the printer is able to connect to the internet.
When I manually go to hp's ePrint website, and try to register my printer using the email address, it fails - unrecognized.
I'm aware that in order to complete the installation, the information sheet must successfully print. That seems to be the only thing failing. Any thoughts?
Here is some information about the printer and environment:
- Apple AP Extreme
- Printer directly wired to AP
- IP: 10.0.1.17, DNS 10.0.1.1 (router)
- Firmware: 20101125
Thanks again.

Everything is now working just fine. I wish I could say that I know what changed, but it must be magic.
This morning, after letting the ePrint stuff rest for a few days, I removed the service (using the web server), cycled power on the printer, added the ePrint service to the printer, and now everything is just fine. I'm able to print from our iPad no problem.
Seems hp fixed something, just not sure what.

Can't enable eprint even with network connected

Windows 8 computer network is connected but eprint won't enable HP8600. Have followed directions for pushing refresh button. Still disabled.

Try the steps below. Make sure nothing is entering under proxy address.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select network tab at the top.
4. Left hand side select IPv4 under wireless.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.
Let me know it goes.

HT4623 why would my iphone suddenly stop doing eprint jobs with my airprint friendly printer?

Hi
Yesterday my iphone 3 stopped recognizing my airprint friendly computer and will not let me print directly from my iphone anymore. Any suggestions on what I need to do?
Thanks

I have the OJ 8600Pro+, which is Air Print friendly, but if I'm not printing over my wireless network (through the router) I have to have Wirelss Direct turned on in the printer Settings. Then, it still takes six or seven tries before my iphone 5 (with IOS 7) detects the printer. With IOS 6, detection was always immediate. Once the printer is detected, the iphone remembers it until it goes to sleep. Then I have to start all over again. Maybe this is your problem.

EPrint jobs pending not printing, with no obvious issues or errors

Hi,
I have an HP Deskjet 3050A and recently set up an eprint account with HP. It worked great initially but now when I email a print job to my printer it doesn't print. There are no error messages on the printer itself. Both the wireless light and settings and eprint light and settings are solid and say that they are working and connected with an IP address. From my HP website it say that the printer is currently connected and online. However all jobs that I have submitted today are listed as pending rather than printed. What is the problem if everything is connected and ready to go?
Thanks in advance for the help!
Sam

It may be best to wait before continuing with trouble shooting. The servers are going through some updates right now, and which may be causing some delays. Give it 1-2 more hours at the least and 24 hours at most, before trying again. If the issue continues after a 24 hour period, let me know and we will continue form there.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Yet another BtBroadband user with slow connection....

Hi all.
I've been having this problem for over a month now. Just before xmas our internet connection went down.
I phoned Bt, went through all the usual tests to be told there was nothing wrong with them and it was my equipment. Ok, no problem, I went out and bought a new router, got it home, plugged it in, still no internet.
Phoned Bt again, spoke to different person at callcenter, went through all the usual tests to be told that, yes, there was a problem with the line and to give it a few days for them to sort out. I gave it a few days and, amazing, the internet came back on. Problem was it was very slow. Ok, I thought, new modem, fixed connection, maybe I need to give it a few days to speed up. It's been a month now and it's gotten slower. So slow infact that when I ran the Bt Speedtester it said that my download speed was 59kps. This was the same speed I was getting back in '97 with my old dial-up modem (ah the memories...).
Anyway, called Bt again, explained all the above and was directed to thier online guide for improving the connection speeds, not very helpfull. Prior to the line problems in december, I was getting speeds up 21000kps. The line was rated for speeds between 4000-21000kps. My property is less than a 1km from the exchange, my router is connected to the main socket and I didn't have any problems prior to the line problems last year.
I have been searching through the previous posts on this forum and can see many other people with similar issues. One post stated that, because of thier line problems Bt had downgraded thier bandwith while the problem was dealt with, but had forgotten to increase it back to normal speed once it had been sorted.
This could be the issue with my connection and if any of the moderators are out there, could this be looked into, it would be deeply appreciated.
My Btspeedtester results and modem stats are as follows:
Download speedachieved during the test was - 59 Kbps
For your connection, the acceptable range of speedsis 100-250 Kbps.
Additional Information:
Your DSL Connection Rate :286 Kbps(DOWN-STREAM), 888 Kbps(UP-STREAM)
IP Profile for your line is - 135 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 0.64:11.33:89.14 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
Upload speed achieved during the test was - 728 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 888 Kbps
Router:
Type    Interleave Path
   Status    SHOWTIME
Downstream    Upstream
      Data rate(Kbps)
286Kb    888Kb
   Noise Margin
21    14
   Output power(dBm)
0    257
   Attenuation(dB)
21    7
I hope someone can help. Thanks in advance.

"If line instability is shown to stabilise normally the exchange equipment will remove the banding however on some occasions it does not release,and bt can release it manually but they like to see hub stats that show that during the line has been stable for a minimum of 5days but 10 is prefered" I'm not sure whose brainwashed you with this stuff, however. FaCT: BT retail complain to BTw about stuck banded profiles, and yes they can reset the INP, but if the line characteristics don't improve, it goes back to where it was. They also operate to strict protocol, and don't put lightweight preference on whether its seen a fixed rate at 5 days or 10. Truth is if the line is seeing high noise margin and not improving, it has a problem, and often can't be fixed, or take advantage of 21CN. Or sometimes it can be fixed, by the customer, if they choose to, or are capable of. It's not in BT's remit to fix home induced noise, but it is for the line, if its possible. They (BTw) can change any workiing parameter they see fit on DLM, but the main reason for it, is to run in AUTO. In other words, they don't do it for all and sundry, or at the drop of a hat, without good reason. Hence, they don't set "preference" for seeing stable connections. They tend to let the physics do its job.
Click the star if my posts have helped.

Remove Reschedule jobs from Developer Reports Sever 6i

Dear All,
Please guide me how i can remove reschedule jobs from Developer Reports 6i
Regards
USMAN ALI

Install Forms in one directory (You can have reports in the same
directory).
Install oracle DB in another directory.
Don't change any file and reboot.
The listener will start automatically as a service.
(If not from a command line write "lsnrctl start" to start it).
To connect from forms/report to the DB you need to activate the
sqlnet easy config tool from the directory where forms is.
Follow the wizard to define an entry in the tnsnames.ora file
automatically.
Then you can use your forms with the DB.
(IF you get problems it usually helps to let us know the error
code you get so we can direct you in the correct direction).

Issues with WiFi connection to Deskjet 3545

Hi,
I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer, so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
3. Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

Hi @DmiBro,
Welcome to the HP Forums!
I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
I would recommend the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Issues with JDBC Connection Pooling

Hi all,
I'm experiencing some unexpected behaviour when trying to use JDBC Connection Pooling with my BC4J applications.
The configuraiton is -
Web Application using BC4J in local mode
Using Default Connection Stagegy
Stateless Release Mode
Retrieving Application Modules using Configuration.createRootApplicationModule( am , cf );
Returning Application Modules using Configuration.releaseRootApplicationModule( am, false );
Three application modules
AppModuleA - connects to DatabaseConnection1
AppModuleB - connects to DatabaseConnection2
AppModuleC - connects to DatabaseConnection2
My requirement is to -
Use App Module Pooling and have individual pool for each Application Module
Use JDBC Pooling and have individual pool for each Database connection
Note: All configuration was achieved in design mode (i.e. right clicking AppModule->Configurations...)
1. Initial approach -
In the configuration for each Application Module I specified the connection type as 'JDBC Datasource' and specified to approriate datasource.
Tried setting doConnecitonPooling to 'true' as well as 'false'
In the data-sources.xml I specified all the appropriate info including min-connections and max-connections.
I would expect, with the above config that BC4J would use OC4J's built in JDBC connection pooling.
2. Second approach -
In the configuration for each Application Module I specified the connection type as JDBC URL.
In the configuration I specified doConnectionPooling = 'true' as well as the max connection, max available and min available
What I experienced in both cases was that the max connections seem to be ignored as the number of connection as reported by the database (v$session) was exceeded by more than 10.
In addition to this once the load was removed the number of JDBC connecitons did not drop (I would have expected it to drop to max available connections)
My questions are -
1. When specifying to use a 'JDBC Datasource' style of connection, is it in fact OC4J that is then responsible for pooling JDBC connections? And in this case should BC4J's doConnectionPooling parameter be set to true or false?
2. Are there any known issues with the use of the JDBC Conneciton Pool as stated by the above to approaches?

Thanks for the additional info. Please see my comments. below.
Sorry should have been more specififc -
1. Is each application pool using a different JDBC user? You mentioned DatabaseConnection1 and DatabaseConnection2
above; are these connections to different schemas / users? If so, BC4J will create a separate connection pool for each
JDBC user. Each connection pool will have its own maximum pool size.
Each 'DatabaseConnection' refers to a different database, actually hosted on a seperate physical server, different
schema and different user.BC4J will maintain a separate connection pool for each permutation of JDBC URL / schema. If each user is connecting
to a different DB instance then I would expect no greater than 10 DB sessions. However, if a DB instance is hosting
more than user then I would expect greater than 10 DB sessions (though still no more than 10 DB sessions per user).
2. Are all the v$session sessions related to the JDBC clients? There should be at least one additional database
session which will be related to the session that is querying v$session.
When querying the v$session table I specifically look for connections from the user in quesiton and from the machine
name in question and in doing so eliminate the database system's connections, as well as the query tools'
connection. One area I'm not sure about is the connection BC4J uses to write to its temporary tables. I am using
Stateless release mode and have not explicetly stated to save to the database but I'm wondering if it still does if so
and how does it come into the equation with max connections?BC4J's internal connections are also pooled and the limits apply as mentioned above. So, if you have specified
internal connection info for a schema which is different than the users above I would expect the additional conns.
One helpful diagnostic tool, albeit programmatic, might be to print the information about the connection pools after
your test client(s) have finished. This may be accomplished as follows:
// get a reference to the BC4J connection pool manager
import oracle.jbo.server.ConnectionPoolManagerFactory;
import oracle.jbo.server.ConnectionPoolManagerImpl;
import oracle.jbo.pool.ResourcePool;
import java.io.PrintWriter;
import java.util.Enumeration;
// get the ConnectionPoolManager. assume that it is an instance of the supplied manager
ConnectionPoolManagerImpl mgr = (ConnectionPoolManagerImpl)ConnectionPoolManagerFactory.getConnectionPoolManager();
Enumeration keys = mgr.getResourcePoolKeys();
PrintWriter pw = new PrintWriter(System.out, true);
while (keys.hasMoreElements())
Object key = keys.nextElement();
ResourcePool pool = (ResourcePool)mgr.getResourcePool(key);
System.out.println("Dumping pool statistics for pool: " + key);
pool.dumpPoolStatistics(pw);
}

Problem with Database Connections in the designer - Catalog not updated

This is Crystal Reports 2008 (12.2.0290). We have a number of reports that are viewed using the .Net runtime with the connection details set at runtime using ODBC to talk to SQL Server on different systems. This all works fine and is not the problem. The problem is when editing reports in the designer take the following example:
Developer 1 creates report on their machine that references tables. DSN Name is DEV_DSN, pointing at their local database on their machine called DEV_DB1. Developer 2 needs to edit the report on their machine with a DSN of the same name (DEV_DSN) but this points to a different database on developer 2's machine called DEV_DB2.
Developer 2 goes to the Set Datasource Location option in the Database menu to get it to point at their local DB only it doesn't work. They click on the first table included (or the connection name) in the report and click update - they are prompted for the logon details for their local DSN/DB and supply them but they see an error indicating that there is an "Invalid object name" because the table is still being prefixed with the database name from developer 1's machine. When the table is expanded in this view the Catalog still shows as the DB name from developer 1's machine despite the connection properties above correctly showing the local DB name.
As I say this is a design time issue not a runtime issue.
Any ideas? Is there any way we can edit the Catalog name manually?

Try setting the Over ridden qualified Table Name
Set Datasource - > Tablename -> Properties
Double click Over ridden qualified Table Name, type name as shown in in the table name field above it.
Repeat for each table, this removes schema and db names associated with Table. Take a look at the SQL and make sure all tables are no longer prefixed.
Report should now be totally portable.
Ian

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

HT3728 My Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

Giancarlo Messalli wrote:
1) are you sure a reset holding the reset button will not delete my data?
Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
Thank you again
I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
Here is the Apple info on reset.
http://support.apple.com/kb/ht3728
And here is the quote from the horse's mouth so to speak.
Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility.

Deploy VMs with SCVMM 2012 R2 with Internet connection

Hello everyone,
I am trying to use SCVMM 2012 R2 to create a network that will eventually hold 2 clouds, but for the moment I can't seem to create the network and connect the VMs to the Internet.
My lab is this (all hosts are in a LAN, 192.168.0.0/24, gateway 192.168.0.1, and ONLY ONE NIC per HOST ):
1 host DC, DNS, SQL, SCVMM 2012 R2 (IP 192.168.0.8)
2 hosts with Hyper-V (IP 192.168.0.9 and 192.168.0.10)
I'm also planning to create some "virtual" networks for clustering and live migration, which will use the same physical NICs as the management network (since I have only one physical NIC per host).
Could you please give me a quick guide of how to set this up with SCVMM 2012 R2, so that I can take advantage of the new features (network virtualization, logical networks, logical switch) and for the VMs to be able to reach the Internet?!
Thank you so much.

Thanks for the reply.
My network architecture is exactly like the one described on your paper, with 2 differences:
1. I only have one host in the Production group and one host in the Gateway group
2. The first host has one physical NIC, the second host has 2 NICs, one internal and one with an Internet (routable) IP
After applying the logical switches on the hosts, I lost Internet connectivity on the gateway host (I have no idea why there is no logical Gateway Switch !!!). VMM completed the jobs with no error.
Any thoughts?

Ebook removed from sale, with no idea why

Hey Everyone,
I'm having an issue with one of my ebooks with iTunes Connect. I have 3 books up on iTunes Connect. 2 up for sale, and the first one with a "removed from sale" status. I contacted iTunes Connect Support, but to no avail, they did not respond to either one of my attempts. I checked EVERYTHING, including the thumbnail image (827x1280 is the resolution). I read the entire iTunes Connect Publishers Guide and followed it exactly. I have no idea what to change (major flaw in Apple's developer system, if you ask me). I tried resubmitting my book and that did not work either.
So I am stuck with this problem. It has been at least six weeks. Any suggestions would be great. Thanks.
Andy.

NCBP Tech 2 wrote:
I see your point.
Just seems like more a of gamble than a real answer. $99 is not something that I am willing to gamble with, being that I am only selling this ebook for $4.99. It may be a good last resort option though. Thanks for the assistance.
Does anyone else have any suggestions?
I have one. Just tried it today. Open ITunes Producer 2.3. Go to Help>Feedback An email to [email protected] will be generated. Try that as your avenue to find a resolution. Like you, I am on my third or forth attempt to resubmit my package to clear the dreaded RED DOT. Not having much luck. Apple won't talk to me either.

Database Design for use with XSQL-connected Clients

Hi all,
this might seem a little off-topic at first, but I suppose we are not the only ones reading this group designing an architechture using XSQL servlet as the only connection to the database, with clients connecting over the internet.
So far our approach works well, but of course any database round trip is much more expensive in this environment than with clients that hold an open connection to the database.
That led us to the idea of generating primary keys on the client instead of the database (e.g. with CoCreateGuid on Win32). Do those GUIDs have to be stored in the Oracle database in a RAW column or does a NUMBER field do the job?
I found a hint in the Oracle 8i Replication manual to use SYS_GUID values in a RAW(32) column as a primary key to avoid conflicts between sequences on multiple machines. But I didn't find any statement concerning the performance issues of this.
Our database will not store huge amounts of data (most tables < 100.000 rows, just a handful more than a million in huge environments, which will be able to afford huge machines...), so this should not be
a problem, I guess.
Does anyone of you have experience with this?
And another question: Can I safely assume that keys generated with SYS_GUID on the Oracle server will not likely be the same as those that are generated using CoCreateGuid on the Win32 client?
Thanks for your input.
Olaf Lewitz
ohltec SOFTWERFT, Hamburg

Don't GUID's have hyphens in them? If so, you'd have to use a VARCHAR2(xx) of appropriate length. If not, then you can likely use HEX_TO_RAW() and RAW_TO_HEX() to store then in a RAW as you've noted.
Note that the XSQL Servlet's default connection manager does to connection pooling, so the roundtrip to the database may not be as expensive as you're thinking. :-)

Remove eprint job with HP Connected

Similar Messages

Maybe you are looking for