Sales order values not coming in copa report can been seen in ke24

hi
i have did sd and billing and actual settlement through va88
i can able to values in ke24 actual line items.
but when i cant able to see values in ke30 copa report aganist sales order characteristic
and aganist record type A values are not flowing in copa report.
please help me.
thanks
kareem

hi ajay,
i have again prepare actual line items report from ke94 ,ke91 and executed report ,
here for that particular sales order values are flowing through record type C but not flowing for record type A.
sales order is not displaying for record type A.
and for that c only revenue and and raw material cost is flowing.
thanks
kareem

Similar Messages

PR/ Sales order value not coming in condition value routine

As per the requirement while creating a PO I need to add a new condition type and need to calculate condition price for this newly added condition based on some matrix.
For this requirement PO will always be created with reference to PR and with account assignment category as 'E' .
(Hence sales order number /item will be copied from PR to PO in account assignment tab )
Now I have created a new pricing requirement routine ( To add the condition type ) and new condition routine to calculate and update the price.
These routines are working fine if i check them with hard coded price values.
But the problem is that I need the PR number(which we put in item overview ) / Sales order item number (from account assignment ). these values are not coming in pricing tables in the routine...structure EKPO come blank, KOMP-AUBEL is also blank).
Please give your suggestions how i can i get PR/ SO in the condition values routine .
Please reply

resolved my self

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Open sales orders value not updating currectly in sales value of CM

Hi SAP experts,
I have an issue some of customers credit exposure value showing worng value.We are using static credit limit check.
customers credit limit RM20000,
open sales order valueRM6,073.77
open delivery=0
open billing =0
open items(recievables)=3,464.39
Credit exposure =9,538.16.
But i have checked in VA05 its showing 13,001.10 value, i have checked all areas didnt get any solution.
I have run the reports RVKRED09 and RVKRED77 , RVKRED88 also no updates in the credit management.
is there any other areas i need to check, advise me.
Regards,
Nooka

The only thing you really need to check is RVKRED88.
It is not the correct procedure to compare the open sales order value with the sum net value of VA05.
In VA05 open documents are displayed indifferent whether they are already part-delivered or not. That's why the open values from the VA05 are not directly comparable with the values in RVKRED77.
As described in OSS note 716141; reports RVKRED88/77 shows the correct value which should be in your system.
If you need to know more let me know.
Thanks,
Gerard

Rajesh/Sadhu/RobertoUrgent :- Open Sale Order Value not getting Reduced?

Hi,
   Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
   What could be the reason ?
   Pls help.
Regrds,
Binayak
Message was edited by:
        Binayak Ghosh
Message was edited by:
        Binayak Ghosh

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Sale quantity is not updated in COPA report

Dear All
I am using Account based COPA. In the report COGS and the revenue is captured correctly, but the quantity is not coming. While seeing the line items I found that at the time of PGI one line item with +ve quantity is generated and at invoicing one line item with -ve quantity is generated and as a result quantity becomes ZERO. A screenshot is pasted below for the convenience.
Can you please help me in finding the error in my configuration or in report.
Regards
Rajneesh Saxena

Hi Rajneesh sir,
I believed till now that, at the time of PGI only COGS value is transfer to COPA and not even sales quantity in accounting based method, but after observing your thread I need to frame my understanding differently now.
OK, since the Sales quantity is transfered to COPA at the time of PGI, why we need to transfer again at the time of billing?
So, my suggestion is why don't you de-assign the quantity field under the billing settings and try? Transaction code KE4M
Regards...
Jose

Total values not reflecting in copa reporting

Dear All,
I have configured COPA (Costing based) & assigned all SD condition types to copa value fields.When i execute profitability analysis the report is giving correct output for following example
Particulers                                     Qty           Amount
Customer 1
Sales Domestic (Material No.1)    150        15000
Sales Domestic (Material No.12)   50           5000
Sales Domestic (Material No.23)   30           3000
But the report is reflecting only one entry despite of different line items for same material with different qty .
Particulers                                Qty     Amount
Customer 1
Sales Domestic (Material No.1) 265    26500
Sales Domestic (Material No.1) 100   10000
Sales Domestic (Material No.1) 175   17500
Kindly tell me why this is happening.
Regards,
Sany.

Hi,
Check report format, if there is filter as per material or not, if it is there then remove the filter and also execute report as per sales order.
regards,
sreekanth

Sales order qty not updated in copa

Hi Gurus,
My client has activated Costing based COPA.
We have activated Incoming sales orders with option
Transfer with date of deliery/scheduled billing date.
When We are posting sales order we are able to see a copa document with record type A.
In that document we want to see the Sales order quantity or delivery quantity, delivery date fileds.Please let me know what all the value fields We need to assign.
Do I need to write any derivation rule for incoming sales arders also.
we are able to capture the total price, material etc from the sales order in COPA document.We need only sales order qty or Delivery qty or delivery date to be updated in COPA document.
Please suggest me
Regards
Chaitanya

Hi Chait,
Pl check whether your client has assigned SD Qty Fields to COPA Quantity fields in KE4M. Sd quantity fields are FKIMG- Billed Quantity, KWMENG-Order Quantity and the same shall be assigned to ABSMG-Sales Quantity. If not, please maintain the same. Otherwise, we need to look for some other work around solution.
Trust this resolve your problem!
Cheers!

Sales order are not coming in FS10N ?

Issue: How is it possible to see number of sales order in the detail of item in the transaction FS10N?
When i see the Transaction FS10N for 2011 , at item level Sale Documents are Present , but when i Use the Same FS10N for 2012 , Sale Document values are not present ?
Kindly tell me the possiblities why the Sale Document Values are not Coming ? Its Urgent .
Best Regards
Amit Arora

Did you install any major upgrades or other system changes recently? I am not saying that that could cause this, but I really cannot think of anything that would suddenly stop populating Sales Document and Sales Document Item when you enter a new fiscal year. Also, are you sure you are looking at the line items that originated in the SD module?

Open sales orders are not coming in credit exposure

Hi,
We have implemented FSCM credit management, when i am running credit exposure, i am able to see open items from FI (200) but not for open orders (100) & Delivery (400), we have created some sales orders, which have exceeded the credit limit, system should give us a warning message. Could anyone help me to overcome this issue.
Thanks,
Sai

Hi Sai,
Additionally, you should check the following BADI_SD_CM, if the implementation of that BADI is correct then it should work.
Best regards,
Cristobal.

Sales order number not coming QA32 screen

Hi Gurus,
We have created a lay out in QA32 including sales order no,but the sales order no is not visible in the Change data for inspection lot (QA32 Screen)
We are creating production order via sales order.Our client wants sales order number displayed in the screen.
What must the reason for not picking the sales order number?
Is there any other settings we are missing.
Thanks in advance
Regards
Ramkumar

Hi,
First you tell me which Inspection type your using.
Sales order number will Show in the lot if following requirement will exist.
1. Make to Order Scenario with 04 - Inspection type (Goods Receipt from Production)
2. Inspection at sales Order level with 10,11 Inspection Type.
Regards,
S.Babusingh

Where is Open Sales Order Value coming in Credit Master sheet?

We have a customer whose credit exposure is below credit limit. I'm in Customer Credit Management overview screen and I ran Credit Master sheet report (for this CMR) under Environment -> Reporting -> Credit Master Sheet.
I see value in Receivables and Open Sales Order Value which sums up to Credit Exposure Value. I'm wondering which sales orders are considered to calculate open sales order value?
I ran different order reports like VA05 and some custom reports available, but I could not find a direct report that matches the open sales order value.
I manually compared Open Sales orders based on Horizon date, the value that I'm arriving is kind of close of Open Sales Order Value in Credit master sheet report.
Update rule used is 000012 in automatic credit control screen.
Please let me know if there is an easiest way to find data behind Open Sales Order Value in Credit master sheet report.
Appreciate any help!

. I'm wondering which sales orders are considered to calculate open sales order value?
Those customer orders which are relevant for credit limit. Please let me know if you are talking about something different?
I ran different order reports like VA05 and some custom reports available, but I could not find a direct report that matches the open sales order value
.You can not compare the VA05 open sales order report with FD32 open sales order report.
You can find out the open order values of Credit manangement(FD32) in S066 table.
Please let me know if there is an easiest way to find data behind Open Sales Order Value in Credit master sheet report.
For open sales order you can find out in S066 table and sales values in KNKK table

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Not Updating Open Sales Orders Value for CreditManagement

Hi Frendz,
This is the first time am implementing creditmanagement in my system tested simple credit limit check working fine.
Now testing Static and Dynamic(Automatic) it also working fine but Its not caliculating open sales orders value either static or dynamic while Creating s.o, settings made clicked on open s.o, i have already created sales orders value of 10th.
EX:- customer balance is 2lacs, credit limit is 1lac while creating s.o it always showing balance 1lac only(Instead of 1lac10th) with open sales order value is 10th.
Let me know Where i have missd settings.
Hari Prasad

hello,
it is maintained against the cr control area in ent structure.
one needs to change there.
r u in prd system or development?
becoz if prd, then this change will effect a lot of ongoing docs.
rgs,
AK

Conditions in Purchase Order - No scroll bar/Sales Tax value not in mmr

Hello,
I am stuck in a weird problem where I have created a Condition Calculation Schema, assigned it to Schema group and assigned that schema to vendor, but when i open my condition in the PO, it does not give me scroll bar i.e. I have calculation Schema with around 10+ conditions, but when I try to put all the conditions in PO at one time, the scroll bar doesnot come up and without it, I cannot view all my conditions in the PO. Its saving the conditions though as seen in report, but cannot display it in PO without the scroll bar. Any ideas?
Another assignment is that sales tax value and % should not increase the mmr value at time of GR, but when I do GR its adding the sales tax value to mmr value, my requirement is just Gross price be added to mmr, not sales tax value/%. I tried the Statistical checks in Calculation Schema, but to no vail, at GR the sales tax value is being added to the mmr record. Any ideas?
Lots of points awarded for answer/answers.
Any clue will help
Thank you/Afshad
Edited by: Afshad Irani on Jan 14, 2009 10:27 AM
Edited by: Afshad Irani on Jan 14, 2009 2:32 PM
Edited by: Afshad Irani on Jan 15, 2009 6:19 AM

Q Another assignment is that sales tax value and % should not increase the mmr value at time of GR.
Ans:
Dear Afshad,
Reference to your question, you need to do few settings in your Condition Type and Pricing Schema, if you need Sales Tax value & % not to include in your Material value.
1 - In SPRO, Check that in your condition type, Control data 2 tab, Accruals check box should not be selected.
2 - In your Calculation Schema, against your condition types for Sales Tax % and Sales Tax Value, select the check box for Manual & Statistics.
3 - Also in your Calculation Schema, you should not select any account key in AccKey (Account Key) and in Accruals colomns.
If any one of these setting is not defined, the valuation price for your material will be increased due to the fact that your settings for Condition type and Calculation Schema is allowing the same to hit the value of your material directly.
Hope it works for you.
Regards
Jibran

Sales order values not coming in copa report can been seen in ke24

Similar Messages

Maybe you are looking for