Select printers and print

junnybug wrote:
Can I just have a prompt or dialog box that will ask me which printer would you like to use???
In most cases you get this dialog box every time you print. It is called the print dialog and normally when you print, a print dialog appear showing the printer that is to be used. Which printer you see will be based on what you have set in Print & Fax as you mention. But regardless of what you have set there, you still have the option to change the printer via the print dialog.
If you are using an application that does not show the print dialog, like MS Word and that stupid "print one copy" print icon in the toolbar, then you can often change the action the print icon uses so that the print dialog appears.

Similar Messages

Options gone for select,edit, and print under HP Smart Web banner since HP dialed in to fix crash

The buttons are gone for selecting, editing, and printing under my HP Smart Web since HP dialed in and fixed another problem. I have uninstalled and reinstalled the software but still no luck. All that shows up is the "HP Smart Web Printing" banner with the X to exit; that's it, no options listed below. My computer has completely crashed twice since I started using it 1/4/10. The second time the person dialed in and changed the bios and a few things in msconfig but I don't see anything there that would cause the smart web printing. HELP. Am I missing something really silly since I am a new user of HP Smart Print?
Thank you in advance if you can help!
^j^Put behind you the troubles of yesterday, today's a new day full of blessings.
^j^May you and your loved ones be blessed with peace, love, joy,and health now and forever.
^j^Put behind you the troubles of yesterday, today's a new day full of blessings.
^j^May you and your loved ones be blessed with peace, love, joy,and health now and forever.
^j^Carrie

I am REALLY annoyed to read this post. I have spent a lot of time to try and fix my computer (which I don't have with 5 kids...not your problem I know and NOT the point). It should NOT be this hard to update and fix a product. I DON'T WANT the Bing bar...and am feeling like I am being forced to accept it to make my puter run correctly because it is supported by HP. What....kind of service is THAT???????? I hope that someone from HP....admin or whatever...reads this. I am "madder" than mad. I have had HP products for years with few problems...and all of which I could find a solution for. This is unacceptable...and I hope someone listens. I don't know if I can trust HP again....when it won't even use the browser most use without problems. Sorry to the rest of the "forum" for venting...but I can't get help...am frustrated...find this out now...and it is nothing personal.

Authorization for "Select Layout and Print"

I am using Business One 8.8 PL 18. The option under the File menu for "Select Layout and Print" is available for super-users and some other users. We want it to be available for all users. What authorization setting controls this function? Thanks.
Marcia

Under "General" section, assign "Full Authorization" rights to "Print Layout Designer"
George

HP 1160 printer and HP newer printers and print queues

FYI. The HP 1160 printer does not support queue based printing.
We use Novell 5, IPX, and print queues. Our company has always been HP
LaserJet printers based. They have been very reliable and only recently did
we need to replace one. We have small workgroups so lighter duty printers
have been fine and the 1160 seemed comparable to others we still use. Until
we just purchased the 1160 all previous HP printers had supported Novell
print queues. Hp tech support said it was a Novell issue..(typical cop out).
Any input on what new HP printers actually support Queue based printing
would be appreciated. Nothing on their web site actually indicates this
support (or lack of it).
Thanks
Terry B

You can always use external jet directs if necessary.
Additionally, if they support LPR, you can use PrintQs via NDPS.
( No NDPS support required on the client side.)
Terry B wrote:
> FYI. The HP 1160 printer does not support queue based printing.
>
> We use Novell 5, IPX, and print queues. Our company has always been HP
> LaserJet printers based. They have been very reliable and only recently did
> we need to replace one. We have small workgroups so lighter duty printers
> have been fine and the 1160 seemed comparable to others we still use. Until
> we just purchased the 1160 all previous HP printers had supported Novell
> print queues. Hp tech support said it was a Novell issue..(typical cop out).
>
> Any input on what new HP printers actually support Queue based printing
> would be appreciated. Nothing on their web site actually indicates this
> support (or lack of it).
>
> Thanks
>
> Terry B

I select "reverse" and printer still prints from page 1; how do I print the last page first, etc

I select "reverse" so the printer will start printing on the last page and end on the first and it still prints from page 1 leaving me to cplace all the pages in order manually. How do I do this. My last HP had no problems; I have a 6100
This question was solved.
View Solution.

Please try this:
Enter Control Panel > Devices and Printers.
Right click the printer icon, click Printing Preferences.
Select the Advanced tab.
Set the Pages Order as Front to Back.
Additioanlly, verify the same setting apply for the used program as customized preferences may kept for a specific program:
Open the File you would like to print, the click File > Print.
Click Preferences and verify the page order set as Front to Back.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Select entries and print button to pdf

I have a drill down report where I have the summary report and a row under each summary report entry which toggles to show the details report.
Now my task is to make each of the summary report entries "selectable" by a
checkbox next to each summary report entry...
For the selected entries the report needs to have a "View
Details in pdf" option...
I have no clue how to go about this, I know SSRS itself does not have the capability to let us add buttons using the GUI...
I also right-clicked on the report in the "Solution Explorer" to find a "view code" option...
Do I need to modify/add things to this code to get what I want?
Dhananjay Rele

But still the basic question remains unanswered, How do i select multiple records from my result-set?
Hi Rele,
In SQL Server Reporting Services, the checkbox is only available on Parameter area. We cannot add checkbox to report body. So you cannot select multiple report on the report body from the result-set. What you can do is using parameter to filter multiple
records, and using “Go to a report” action and passing this parameter to another report. For the detail steps, please refer to your another thread to see Simon's reply.
http://social.technet.microsoft.com/Forums/en-US/fbb73224-f010-47e5-8300-d33828cca33d/print-to-pdf-option-in-report?forum=sqlreportingservices
Regards,
Charlie Liao
TechNet Community Support

Select-options and Print-preview of Script both in a single-screen

Hi All,
I have a requirement like the preview of a mail attachment which is in PDF format and a select-options to enter email-id's both needs to embed in a single screen.
Please reply if you have any solution..
Regards,
Sundeep.

Use this fm SSFCOMP_PDF_PREVIEW,
It will preview the pdf
кu03B1ятu03B9к

Pages - Share and Print - Email document issue

I ran into an issue today on my iPad2 and wanted to see if it was just me or can anyone reproduce this error. If it turns out to be just me, someone help me undertand how to get around the issue. If it is more widespread, where do I report this so it can be resolved in an future release?
Here is what happened.
I received a Word document via e-mail. When I opened it in e-mail and chose to "open with Pages" it worked fine. Imported into Pages sans the font (which I've come to expect). Then I edited the document (it was a quick survey I was taking) and then was ready to send it back to the person who sent it to me. I chose the tools icon, selected "Share and Print" then selected "Email Document" and then chose Word as the format. It converted it and attached the file in a blank e-mail ready for me to address and send.
Well, I wasn't ready to send just yet. So I clicked on "Cancel" and then "Save Draft" which it did successfully. Then I went into email, edited my "Draft" in my Drafts folder, addressed it, etc. and sent it on its merry way. Well, guess what? The file did not come through on the e-mail. Just my text.
I tried "copy and paste" of the file after saving as a draft and it only sent the "picture" of the file ICON and not the file itself. I tried multiple times saving it as a draft and then sending and it never worked.
If I send from within Pages right at the time after "Email Document" is selected, it works every time. It seems to only be when I save the email as a draft from within Pages that it will not send the attachment or something happens to the attachment. I did notice also, that if I edited any "text" from that draft and then saved the draft again, all my edited text wouldn't save either. So any "Draft" saved from Pages I couldn't edit regardless of any attempt.
Draft saving and editing within the email application works as expected.
NOTE: Just before submitting this discussion, I tried the above on my wife's iPad2 with the same results. Anything "saved as a draft" from Pages in e-mail, will not send the attachment. Anything sent directly from within Pages and not saving it as a draft, will send the attachment.
There are times I would like to save it as an attachement, should this work? Thanks everyone!
Edward

I am only vaguely familiar with iWork.com. I know it is a cloud based way to share documents with others, but this is what the send to option does when you work with Pages, Numbers or Keynote on the iPad. I would assume that the function performs the same way in iWork.com. - but it is only an assumption.
"Send to" is the command that will let you send that file to your computer the next time you sync with iTunes. It is the way the iPad transfers the file to your computer - the iPad method of file sharing. You can sync files back and forth from iPad to computer with file sharing as long as the app on the iPad is compatible with a similar application on your computer. In your case iWorks apps on both the iPad and your Mac.
This article will explain it in great detail for you.
http://support.apple.com/kb/HT4088

Workgroup network printers and sales persons needing access to them

I have a site with multiple sales people that come and go like the wind (about 50). We have a small office workgroup in which we have 4 network printers on
it plus the wireless network. All of their work is done on the internet through their various Windows and Mac based laptops.
The problem is, is that each time we retire a printer and put in a new one, we need to run around to each laptop and load drivers. Scheduling this is a nightmare
and sometimes takes weeks to get everyone done.
There must be an easier way to do this.
Any suggestions?

Hi,
There are two basic ways to make a printer available to the computers on your small network:
Attach it directly to one computer and share it with all the others on a network.
Connect the printer as a stand-alone device on the network itself.
We could follow the suggestions by rj01, install the printer on one special workstation and then share it out, or we could enable homegroup in Windows. When a network is set up as a homegroup, printers and certain files are automatically shared. To
learn more about what homegroups do and how to use them, see
HomeGroup: recommended links.
For more information about install a printer on a small network, we may check the similar article below:
Install a printer on a home network
Or we may consider to deploy printers through group policy:
Reference:
Deploying Printers and Print Servers
Best regards
Michael Shao
TechNet Community Support

HT204135 I have two Epson printers and one Canon printer. Why am I unable to access the same print options on my MacBook Pro as I could on mp PC i.e. select paper type and print quality?

I have just purchased a MacBook Pro as my PC has finaly died.
I have three Inkjet printers i.e. Epson Photo PX700W Epson Photo R340 and a Canon Pixma ip4600 which I connected to my Mac and the print drivers were automatically downloaded. Now when I print using any of the printers the functionality PC i.e. Choice of paper and print quality settings. Is this all I get when using the Mac OS lion or should the functionality be on a par with Windows?

Depending on the application you are printing from, you may need to press the Show Details button in the print dialog to see all of the additional driver menus.
The image below is for the extended print dialog of TextEdit and for a Canon MP990 printer. The Show Details button is on the bottom of the print dialog and will change to Hide Details when selected. And with the menu changed to Quality & Media, you have paper options and print quality settings.

HT1150 I have two shared printers and I want to be able to select the printer when it is time to print without having to set a default EACH time. Can I just have a prompt to ask me which printer to use???

I have two shared printers and I want to be able to select one printer when it is time to print without having to set a default EACH time. Can I just have a prompt or dialog box that will ask me which printer would you like to use??? The only options I can find are "default" and "Last printer used" which means I must go into the Print & Fax area and change the default EACH time I want to print??? Seems very low tech.....

junnybug wrote:
Can I just have a prompt or dialog box that will ask me which printer would you like to use???
In most cases you get this dialog box every time you print. It is called the print dialog and normally when you print, a print dialog appear showing the printer that is to be used. Which printer you see will be based on what you have set in Print & Fax as you mention. But regardless of what you have set there, you still have the option to change the printer via the print dialog.
If you are using an application that does not show the print dialog, like MS Word and that stupid "print one copy" print icon in the toolbar, then you can often change the action the print icon uses so that the print dialog appears.

Mac OS X 10.6 Setting up and Printing to Windows Domain Printers

Hi Guys,
I have a Windows Domain currently running here at work. I am running a print server on one of our Windows 2003 Servers.
I have successfully joined 4 Mac Pro machines to the domain. They are all logging on to the domain and can access shares etc.
My problem is that I wish to add the networked printers that appear on the domain print server to the Mac Pros.
When i go to System Preferences > Print and Fax then click the + button. I see a list of all the printers that are exclusively installed on the Windows Print Server.
Some are listed in the Add Printer window as Bonjour and some Open Directory. The Bonjour items I can add fine, its the Open Directory ones that are causing me problems.
How can I add these printers to each machine without manually installing the drivers for each printer on each Mac. Why am I seeing some Bonjour listed printers and some that are not?
Any help would be very much appreciated

Some are listed in the Add Printer window as Bonjour and some Open Directory. The Bonjour items I can add fine, its the Open Directory ones that are causing me problems.
How can I add these printers to each machine without manually installing the drivers for each printer on each Mac.
The answer depends on what printer description language (PDL) these Windows shared printers support. If they are Postscript then it is possible that a PPD for the printer may already exist on the Mac and so all you need to do is select it from the Print Using menu. And if the PPD is not present then you can still select Generic Postscript. But the thing to note is that since you are sharing the queue from Windows, rather than connecting directly to the printer (as you are doing with the Bonjour printer) then the Mac does not know what the printer is so you still need to manually select the correct printer on the Mac.
If the printer is not Postscript and requires a proprietary printer language then would have to manually install this driver on every Mac. And even with this driver installed on the Mac there is no guarantee that it will work via the Windows share. Many vendor drivers are written for direct communication to the network printer. Sticking a Windows queue in between stops the Mac driver from communicating with the printer and this in turn stops the Mac from printing. So if you can tell us what printer models you have then we can provide better information.
Why am I seeing some Bonjour listed printers and some that are not?
Not all network printers support Bonjour. Often only newer models of business printers support this protocol, while it is more prevalent in consumer printers. And what you are seeing is a multicast coming directly from the printer. So if you don't want the users to bypass your Windows print server and connect directly to these printers, then you may not want them broadcasting their presence.
But the benefit of the printer using Bonjour is that they are able to communicate with the Mac what they are and this helps with the Mac determining which printer driver to use, so as you have noted the setup for the Bonjour printer on Mac is easy, because it helps the help with selecting the correct driver.
Hope this helps with your questions. Please reply if you need more information

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation.

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Why cant I highlight part of a document and print only what is selected in safari?

Why is it not possible to highlight and print the selection in Safari, thought the imac was supposed to do everything, WRONG.
I also have I.pad 2 and because it does not support adobe flash, I cannot open a magazine that I have each week, I have to do this on the imac, so when away from home it again doesnt do what I want it to. Does everything people say. WRONG AGAIN.
Should have stuck with the laptop, it actually does do these things mentioned above.

I purchased the iPad first and waited a year HOPING Apple would fix this problem OR at the least provide something comparable to WINDOWS!
WRONG....and yes it is hard to believe for how ADVANCED Apple is.....that they don't have a simple easy program that allows you to HIGHLIGHT and PRINT ONLY what you highlight!
But....they are making leaps and bounds.....at least you can now cut & paste....thats a good thing!?
HOPEFULLY.......in the VERY,VERY NEAR FUTURE Apple will supply us with the simple software to do these simple time saving chores!
(highlight and print ONLY what you highlight)
Until then we have to cut and paste to several different apps or programs....hoping it will allow you to print ONLY WHAT THE USER WANTS TO PRINT!

Select printers and print

Similar Messages

Maybe you are looking for