Session state is not being passed properly to another page

Hello Gurus,
I have a multi-page application which authenticates using a simple authentication page 101. Right now I have a generic authentication scheme which always returns true (Session Verify Function= return true; I will integrate LDAP later.) It works fine. The app remembers the username from one page to the next (popup pages mainly).
My issue is that, after exporting the application and re-importing into a new workspace, the user/session state is no longer being preserved from page to page. It prompts for a login every new page that is opened (the popups). This ruins the flow and functionality of the app.
I've checked every setting (I think) and cannot find any differences between the two workspaces or apps. Any ideas why this would work in one workspace and not the other?
TIA!
Jonathan
I should also indicate that the issue seems to be specifically in calling "callmypopup" function. For some reason it isn't passing the session id properly to the popup page, where it did fine in the other workspace. function text:
function callMyPopup (sourceItem, popuppagenum, targetItem, appid, appsession) {
//opens popup pg and passes value in sourceItem to targetItem
//sourceitem=calling text box, targetItem=text box in popup page
var minlength = 3;
if (CheckLength(sourceItem, minlength))
var formVal1 = document.getElementById(sourceItem).value.toUpperCase();
var url;
url = 'f?p=' + appid + ':' + popuppagenum + ':' + appsession + '::::' + targetItem + ':' + formVal1;
w = open(url,"winLov","Scrollbars=1,resizable=1,width=800,height=600");
if (w.opener == null)
w.opener = self;
w.focus();
else {alert('Please enter at least ' + minlength + ' characters in your search.');}
Edited by: austindurant on Sep 5, 2008 7:02 AM
Edited by: austindurant on Sep 5, 2008 7:46 AM

It looks like your session id is not correctly passed to your popup page. Try using:
javascript:popUp2('f?p=&APP_ID.:1:&SESSION.:::::', 600, 700);
instead, which does the same thing. Put your parameters for the page items there if required.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Similar Messages

Where clause is not being passed to the report

I just upgraded my crystal reports from 10.0 to 11 R2. Reports were working fine in 10.0 version,
Reports are called from vb.net (vissual studio 2005). When I was running this reports using crystal 10.0 and visual studio 2005, it was working fine, After the upgrade report runs but I am noticing that where clause is not being passed to the reports.It generates report as there is no where clause and produces multiple pages report.

I believe you are encountering an issue documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Ludek

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

OHS - Protocol (Periodic) Next due dates are not being captured properly

Protocol (Periodic) Next due dates are not being captured properly in the Planning Cockpit (EHSH_D_PCP) report nor the Protocol report (S_SH8_7200013). The Planned date is not resetting itself for the medical service sometimes.
Any idea what might be causing this issue?
Regards
Naveen

HI Naveen
Have you overridden the std BADI for calculating Next due date?
Thanks
Jagdsh

My notes are not being passed from one device to another

My notes are not being passed from my ipad to my ipad mini.

There can be several different accounts in the notes app if you have email account that allow you to sync notes. I do not use iCloud email, but I have two IMAP email accounts that sync notes. I wanted to know if you were selecting the correct account on the Mini.
When you launch the Notes app, you can tap The Account button in the upper left corner in order to switch between accounts. If you do not have another Notes account, try turning Notes off on the Mini in Settings>iCloud>Notes>Off. Restart your iPad, go back in and turn Notes on again.

Value in a EIT segment(From Update Page)not getting passed to the Next Page

Hi
We have a extended CO to populate an EIT field as per the calculation in CO, on a custom button click.
Calculated value is stored/displayed in the EIT Update Page.
On clicking Apply, value is not getting passed to the next page, EIT Main Page and further to store the calcualted value in the EIT table.
Anyone have faced such problem ?
Thanks
Arun

Hi Gaurav
Facing problems with put/getSessionValue.
For the first time in a session, we do not have any issues.
For next transaction in the same session,
Variable has the same value even if we go for a next EIT transaction, and replaces this value for the field, without pressing the custom button.
Thanks
Arun

Javascript: to pass values to another page

hi all,
i hav an interactive report. if i clik on a particular row, that row values must be passed to an another page (via javascript)
i found this forum https://forums.oracle.com/thread/2467579 in which they hav used it for sending mail.
but i wanted to pass those values to another page throug javascript bz, i hav installed a plugin nd wrking from it under right clik.
ma javascript function is,
function func(action,el, pos)
   window.location ="http://apex.oracle.com/pls/apex/f?p=71510:2:&SESSION.:::2:P2_X,P2_X2:'+ $(el).children('td[headers="EMPNO"]').text() + ',' + $(el).children('td[headers="ENAME"]').text()";
here i hav redirected it to the 2nd page and in the 2nd page i hav used 2 items to get these values.
$(el).children('td[headers="EMPNO"]').text() +        -------> this is to fetch the empno of that particular row and similarly for the name.
but if i click on the right clik button , no action is happening...
but its working fine, if i use the function as,
function func(action,el, pos)
   window.location ="http://apex.oracle.com/pls/apex/f?p=71510:2:&SESSION.";
so somewhere is going wrong in passing the values in URL i suppose....
and i hav used al d above things in
http://apex.oracle.com/pls/apex/f?p=71510:1 (username: test / paswrd: pex14gm)
pls help me out.....
thanks in advance

Try like this.
function func(action,el, pos){
    var empNum = $(el).children('td[headers="EMPNO"]').text();
    var eName = $(el).children('td[headers="ENAME"]').text();
    window.location ='http://apex.oracle.com/pls/apex/f?p=71510:2:&SESSION.:::2:P2_X,P2_X2:'+empNum+','+eName;
It looks simple and neat.
If you still didn't get post me workspace details.

Control-break statements:value not being displayed.

Hi all,
Iam using the control break statement at end of ..., sum.
value is not being displayed,instead it is showing *********.
even in the debugging mode the value is not being displayed.
iam passing the values into a temp IT,but still the values are not being dispalyed.
here is the following snippet of code.
what could be the mistake?
Please give me the suitable answer.
Thanks in advance.
LOOP AT FT_ITAB INTO FT_WA.
    FTY_WA-EBELN = FT_WA-EBELN.
    FTY_WA-EBELP = FT_WA-EBELP.
    FTY_WA-NAME1 = FT_WA-NAME1.
    FTY_WA-ZTERM = FT_WA-ZTERM.
    FTY_WA-INCO1 = FT_WA-INCO1.
    FTY_WA-WAERS = FT_WA-WAERS.
    FTY_WA-SUBMI = FT_WA-SUBMI.
AT END OF EBELN.
    SUM.
    FTY_WA-BRTWR = FT_WA-BRTWR.
    FTY_WA-KTMNG = FT_WA-KTMNG.
    FTY_WA-NETPR = FT_WA-NETPR.
   APPEND FTY_WA TO FTY_ITAB.
   CLEAR FTY_WA.
ENDAT.

Abhi,
i tried as you said values are being diplayed,but they are not gettin totaled,i want the sum of values at the end of line item,I need to pass these valuse to alv.
here is the complete code.Please tell me how should I proceed.
TABLES:EKKO,EKPO,LFA1.
TYPE-POOLS:SLIS.
DATA:HEADER TYPE SLIS_T_FIELDCAT_ALV,
     WA TYPE SLIS_FIELDCAT_ALV,
     LAYOUT TYPE SLIS_LAYOUT_ALV.
TYPES:BEGIN OF PH_TY,
        PH_EBELN LIKE EKKO-EBELN,
        PH_AEDAT LIKE EKKO-AEDAT,
        PH_LIFNR LIKE EKKO-LIFNR,
        PH_ZTERM LIKE EKKO-ZTERM,
        PH_EKORG LIKE EKKO-EKORG,
        PH_WAERS LIKE EKKO-WAERS,
        PH_SUBMI LIKE EKKO-SUBMI,
        PH_INCO1 LIKE EKKO-INCO1,
        PO_EBELN LIKE EKPO-EBELN,
        PO_EBELP LIKE EKPO-EBELP,
        PO_BRTWR LIKE EKPO-BRTWR,
        PO_KTMNG LIKE EKPO-KTMNG,
        PO_NETPR LIKE EKPO-NETPR,
      END OF PH_TY.
TYPES:BEGIN OF PO_TY,
        PO_EBELN LIKE EKPO-EBELN,
        PO_EBELP LIKE EKPO-EBELP,
        PO_BRTWR LIKE EKPO-BRTWR,
        PO_KTMNG LIKE EKPO-KTMNG,
        PO_NETPR LIKE EKPO-NETPR,
      END OF PO_TY.
TYPES:BEGIN OF VO_TY,
         VO_LIFNR LIKE LFA1-LIFNR,
         VO_NAME1 LIKE LFA1-LIFNR,
      END OF VO_TY.
TYPES:BEGIN OF FI_TY,
         EBELN LIKE EKKO-EBELN,
       AEDAT LIKE EKKO-AEDAT,
       LIFNR LIKE EKKO-LIFNR,
         ZTERM LIKE EKKO-ZTERM,
       EKORG LIKE EKKO-EKORG,
         WAERS LIKE EKKO-WAERS,
         SUBMI LIKE EKKO-SUBMI,
         INCO1 LIKE EKKO-INCO1,
       EBELN_I LIKE EKPO-EBELN,
         EBELP   LIKE EKPO-EBELP,
         NAME1 LIKE LFA1-LIFNR,
         BRTWR LIKE EKPO-EBELN,
         KTMNG LIKE EKPO-EBELN,
         NETPR LIKE EKPO-EBELN,
       LIFNR1 LIKE LFA1-LIFNR,
      END OF FI_TY.
TYPES:BEGIN OF FT_TY,
         EBELN LIKE EKKO-EBELN,
         ZTERM LIKE EKKO-ZTERM,
         WAERS LIKE EKKO-WAERS,
         SUBMI LIKE EKKO-SUBMI,
         INCO1 LIKE EKKO-INCO1,
         EBELP LIKE EKPO-EBELP,
         NAME1 LIKE LFA1-LIFNR,
         BRTWR LIKE EKPO-EBELN,
         KTMNG LIKE EKPO-EBELN,
         NETPR LIKE EKPO-EBELN,
      END OF FT_TY.
DATA: PH_ITAB TYPE STANDARD TABLE OF PH_TY,
      PO_ITAB TYPE STANDARD TABLE OF PO_TY,
      VO_ITAB TYPE STANDARD TABLE OF VO_TY,
      FI_ITAB TYPE STANDARD TABLE OF FI_TY,
      FT_ITAB TYPE STANDARD TABLE OF FT_TY,
      FTY_ITAB TYPE STANDARD TABLE OF FT_TY,
      FTY1_ITAB TYPE STANDARD TABLE OF FT_TY.
DATA:PH_WA LIKE LINE OF PH_ITAB,
     PO_WA LIKE LINE OF PO_ITAB,
     VO_WA LIKE LINE OF VO_ITAB,
     FI_WA LIKE LINE OF FI_ITAB,
     FT_WA LIKE LINE OF FT_ITAB,
     FT_WA1 LIKE LINE OF FT_ITAB,
     FTY_WA LIKE LINE OF FT_ITAB,
     FTY1_WA LIKE LINE OF FT_ITAB.
SELECT A~EBELN
       A~AEDAT
       A~LIFNR
       A~ZTERM
       A~EKORG
       A~WAERS
       A~SUBMI
       A~INCO1
       B~EBELN
       B~EBELP
       B~BRTWR
       B~KTMNG
       B~NETPR
       INTO TABLE PH_ITAB FROM EKKO AS A
       INNER JOIN EKPO AS B
       ON AEBELN = BEBELN
       UP TO 25 ROWS.
CHECK PH_ITAB[] IS NOT INITIAL.
SELECT LIFNR
       NAME1
       FROM LFA1 INTO TABLE VO_ITAB
       FOR ALL ENTRIES IN PH_ITAB
       WHERE LIFNR = PH_ITAB-PH_LIFNR.
CHECK VO_ITAB[] IS NOT INITIAL.
SORT PH_ITAB BY PH_EBELN.
SORT VO_ITAB BY VO_LIFNR.
LOOP AT PH_ITAB INTO PH_WA.
FI_WA-SUBMI = PH_WA-PH_SUBMI.
FI_WA-EBELN = PH_WA-PH_EBELN.
FI_WA-ZTERM = PH_WA-PH_ZTERM.
FI_WA-INCO1 = PH_WA-PH_INCO1.
FI_WA-WAERS = PH_WA-PH_WAERS.
FI_WA-EBELP = PH_WA-PO_EBELP.
FI_WA-BRTWR = PH_WA-PO_BRTWR.
FI_WA-KTMNG = PH_WA-PO_KTMNG.
FI_WA-NETPR = PH_WA-PO_NETPR.
READ TABLE VO_ITAB INTO VO_WA WITH KEY VO_LIFNR = PH_WA-PH_LIFNR BINARY SEARCH.
FI_WA-NAME1 = VO_WA-VO_NAME1.
APPEND FI_WA TO FI_ITAB.
CLEAR FI_WA.
ENDLOOP.
LOOP AT FI_ITAB INTO FI_WA.
    FT_WA-EBELN = FI_WA-EBELN.
    FT_WA-EBELP = FI_WA-EBELP.
    FT_WA-NAME1 = FI_WA-NAME1.
    FT_WA-ZTERM = FI_WA-ZTERM.
    FT_WA-INCO1 = FI_WA-INCO1.
    FT_WA-WAERS = FI_WA-WAERS.
    FT_WA-SUBMI = FI_WA-SUBMI.
    FT_WA-BRTWR = FI_WA-BRTWR.
    FT_WA-KTMNG = FI_WA-KTMNG.
    FT_WA-NETPR = FI_WA-NETPR.
APPEND FT_WA TO FT_ITAB.
CLEAR FT_WA.
ENDLOOP.
LOOP AT FT_ITAB INTO FT_WA.
AT END OF EBELN.
SUM.
    FTY_WA-EBELN = FT_WA-EBELN.
    FTY_WA-EBELP = FT_WA-EBELP.
    FTY_WA-NAME1 = FT_WA-NAME1.
    FTY_WA-ZTERM = FT_WA-ZTERM.
    FTY_WA-INCO1 = FT_WA-INCO1.
    FTY_WA-WAERS = FT_WA-WAERS.
    FTY_WA-SUBMI = FT_WA-SUBMI.
    FTY_WA-BRTWR = FT_WA-BRTWR + FTY_WA-BRTWR.
    FTY_WA-KTMNG = FT_WA-KTMNG + FTY_WA-KTMNG.
    FTY_WA-NETPR = FT_WA-NETPR + FTY_WA-KTMNG.
ENDAT.
   APPEND FTY_WA TO FTY_ITAB.
   CLEAR FTY_WA.
ENDLOOP.
WA-SELTEXT_L = 'ebeln'.
WA-COL_POS = '1'.
WA-FIELDNAME = 'EBELN'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'SUBMI'.
WA-COL_POS = '2'.
WA-FIELDNAME = 'SUBMI'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'NAME1'.
WA-COL_POS = '3'.
WA-FIELDNAME = 'NAME1'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'ZTERM'.
WA-COL_POS = '4'.
WA-FIELDNAME = 'ZTERM'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'INCO1'.
WA-COL_POS = '5'.
WA-FIELDNAME = 'INCO1'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'WAERS'.
WA-COL_POS = '6'.
WA-FIELDNAME = 'WAERS'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'brtwr'.
WA-COL_POS = '7'.
WA-FIELDNAME = 'BRTWR'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '20'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'netpr'.
WA-COL_POS = '8'.
WA-FIELDNAME = 'NETPR'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '20'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'ktmng'.
WA-COL_POS = '9'.
WA-FIELDNAME = 'KTMNG'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '20'.
APPEND WA TO HEADER.
CLEAR WA.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM = SY-REPID
    IT_FIELDCAT        = header[]
TABLES
    T_OUTTAB           = FTY_ITAB[].
IF SY-SUBRC = 0.
ENDIF.

HTML file is not being shown properly in the JEditorPane

Hi,
I am using JEditorPane to display an HTML file from the local disk. This HTML file contains the html tables. Now when this file is getting displayed in the JEditorPane, one top row grid is not being displayed in the editor pane. content of the row is there...but the column grid is missing. All other rows and columns are being shown but the first row-column grid which contains the heading for column.
Also when I m printing the content of this JEditorPane using Java Print API then no grid is being printed on the paper. content is coming properly but no table grids. when i have taken the print out of the original html file from the browser then table grids are being printed out properly.
Please do help me out in showing the HTML file in the JEditorPane properly and printing the same.
Many Thanks,
gshankar

Hi,
JEditorPane renders HTML with many limitations.
You can use JDIC for the same. refer: jdic.dev.java.net
But JDIC does not work on windows 98.
Anand

InDesign CS3 5.0.4 Changes to documents not being registered properly

My boss has been complaining about a lot of "mistakes" lately and changes not being made, which is odd because I don't generally make a lot of mistakes. So I started paying very close attention and this is what I have discovered:
Sometimes changes that I make to a document will randomly revert. Sometimes changes don't get saved. The problem is random and not reproducible.
For example: I made a change to an item, and then copied and pasted that item onto another page. The change "sticks" in the new location of the item, but the original somehow, at some random future point, reverts to the pre-change state.
Another example: I moved an item on a page, then saved, then printed, then closed the document. In that order. The printout shows the change. When I opened the document again, the item I moved was back where it was before I moved it.
I am not having this problem in any other application. Just InDesign. Can anyone help me? I don't know what to do, but if it keeps happening, it could get me fired.
My computer is a Mac Pro 2.8GHz Quadcore. OS is 10.5.6.
I have, of course, already tried repairing permissions. Thanks for your help.

Hello Michael,
I just posted the exact problem to a new forum today ...changes revert... Have you had any problems since the preferences were trashed...? Do you think the Save As technique will work alone without the trashing of the preferences?
Well, you do have some company in your misery...
as if that is any consolation for being fired. . .
We hope it hasn't grown to that extent.
We do a quarterly magazine (Veritas) ... and this problem has plagues us since we've moved to CS3 years ago and just thought it was operator error. Until we started noticing much of the same proofreading errors version after version.
Let me know how you're progressing, and we'll report back about how we move along as well.
Until that time ... Earl J.
USASOC History Office
Fort Bragg, North Carolina

Facet secondaryToolBar not being executed properly

Hi Folks,
I used Goldin's pagination solution, but I am having some issues.
Paging of large data sets - SOLUTION
http://vgoldin.blogspot.com/2008/02/myfaces-trinidad-working-with-large.html
I saw that this is an asynchronous call.
The search button calls an action event at my Backing Bean that creates a PagedListDataModel.
The creation does not start a call to the EJB until the af:table needs it.
After executing the RENDER_RESPONSE (afterPhase), the ADF Table starts to render and call the PagedListDataModel to get the page and print the records (famous Extracting Data... message).
My table is updated properly and also the total of records is being print in the statusbar facet of my panelCollection that is being used around the table.
The problem is with secondaryToolBar facet that has two buttons for EXPORT function (EXCEL and PDF). These buttons are not being updated.
Since it is an async call, I tried to put a partialTarget on the buttons after calling the EJB and getting the list of records without success.
I also tried to put a partialTrigger on the buttons for both table and panelCollection without success.
I created a generic (any phase) phase listener in order to check how the things are going and saw that (in this order):
. All the faces are executed (from RESTORE till RENDER). In the invoke application phase it just call the backing bean method and creates the PagedListDataModel.
. After all the phases have been executed, the listener takes place and after all needed have been returned, TWO phase (ONLY TWO) are being executed (RESTORE and RENDER).
Could you please anyone here give me a hand? :-)
Thanks in advance.
Ricardo Morais

Hi,
Can you please check whether the configuration of material availability check in PS is proper and in place or not. Please check the following sap help link on material's availability check in PS:
Material Availability Check - Material - SAP Library
Regards
Saurabh

Equium A60: DVD-RAM not being recognised properly

Hiya!
I have a EA60 and my Mat****a DVD-RAM UJ-820S is being not being recognised by the Notebook properly. When I go into Device Drivers it says the driver has loaded but comes up error code 41. I've reloaded the Driver and the Device and this makes no difference.
I also bought a new Pioneer DVD-RAM and this comes up with the same error code.
Anyone out there can help me please?
[email protected]
Regards,
Gary

You could try this method, maybe it works:
Start Registry Editor
Locate the UpperFilters value under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
On the Edit menu, click Delete, and then click OK.
Locate the LowerFilters value under the same key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
On the Edit menu, click Delete, and then click OK.
Quit Registry Editor and restart your system. Now windows should recognize your ODD correctly.

HT4623 Can not get pass Term and Conditions page after upgrade?

Can not get pass the Terms and Conditions page after upgrade?

Restart your phone and if that doesn't help, reboot the device.
Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

Inserting a db row from a form with a value passed in from another page

We have a report (P1) on a table (T1). P1 has a link column (C), and C is the PK on T1. Clicking on a link (i.e., a row) in report P1, takes us to form (P2). P2 is used to allow the user to insert a new row into T1, with the constraint that one of the columns (X) in T1 must have the same value as X had in the linked row on P1. Also, X is a NOT NULL attribute.
What we are doing is:
First, passing C to P2 by setting the link name=P2_X_C and the link value=#C#
Second, in P2, we are setting form element P2_C via a SQL statement:
SELECT X
FROM T1
WHERE C = :P2_X_C
P2 displays nicely. We set P2_C to display only, and allow the user to enter values for the other columns. The value displayed for X is not NULL and correctly matches the value from P1. However, when we hit the CREATE button on P2, we get error: ORA-01400: cannot insert NULL into "T1"."X". Unable to process row of table T1.
APEX seems to have an "issue" with having a value in a form "set" and transmitted to the DB on INSERT.
Any help would be greatly appreciated.

Hi,
1 For "Display Only" items that you are not populating directly from a database column, if you want to save the value, you have to ensure that Save Session State is set to Yes and these items are not actually submitted with the page. The same sort of thing would apply to Disabled or Read-Only items as browsers do not submit these items - though these are more tricky to deal.
2 Passing the PK value is the most common way of identifying which record contains the values you need. Passing other values is also typical - eg, for applying filters for calendars or searches or for setting flags.
3 For database columns, which should be based on the underlying table's data, you can use the Default Value settings - though be aware that these values do not exist in session state until the page is submitted. That's ok if you don't need to use the value anywhere else on your page
Andy

Passing values to another page with %

I have a button that redirects to another page in my application. I am passing the value of one my fields to the target page via <Set These Items> and <With These Values>. The source field has a % at the end of it. When the value gets passed to the target, the % is not passed. Is there a problem passing values with % in them?
Here is the passing parameter list:
Set These Items: P22_DB_NAME
With These values: &P2_DB_NAME.
The value of P2_DB_NAME is "ESB%". When it gets to the target page it is "ESB".

Brian,
you will need to encode the percent sign and use
%25
instead of
Make your button an url and use this link. It will replace the percentage with the encoded value and pass the value to the specified item.
redirect('f?p=&APP_ID:22:&SESSION.::::P22_DB_NAME:'+$x('P2_DB_NAME').value.replace(/%/, '%25'));
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

Session state is not being passed properly to another page

Similar Messages

Maybe you are looking for