Set up of Task list across the plants

Hello,
I need to set up the task lists for 9 different plants. Essentially they are the same TL but used in different plants. I am looking for the best approach to set them up.
Can we maintain a master task list at high level with central planning plant (without a counter) and then assign the same task list to different plants using group counters ? Whenever I am trying to use TL group counter, I have to set up a neww task list completely, this will result into maintaning 9 different task lists even when they are same. Also how do I set it up for a central plant without using counter ??
Thanks
Sarang

Hello,
Please have Look this Thread might you get some useful out of this [General tasklist across all plants.;
Regards,
Rakesh

Similar Messages

  • No valid task list for material ""  plant "" for selection criteria

    I am getting the following error while creating a production order:
    No valid task list for material ""  plant "" for selection criteria
    Does anyone know how to fix this?
    thanks,
    Scott

    Dear,
    1. Check in Order type dependent parameter - OPL8, select your Plant & Order type. In this check the task list, it should be N. then selection priority in OPJF settings
    2. Chek the routing valid from date for this material by CA02. The production order start date must be between valid date.
    3)Kindly check the routing header.Whether it is for usage 1 and Release status '4'
    4) Task list we maintain in OP8B please check and come back.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Nov 19, 2008 9:57 AM

  • Populate repeating table based on task list - Need the experts out there!!!!

    Ok I will try to explain this as best as I can.
    What I have:
    task list (out of the box, with 1 calculated field)
    form library (customized using infopath)
    ....and a headache ;)
    So What ive done so far is I put in a hyperlink in the infopath form to the task lists newitem form "click here for new task" . I have the title of this newitem form prepopulated based on the form library item. For example, if you open up a form
    from the form library Titled: Test Entry, and has an ID of 5. The newform title of the task list will read "Test Entry | 5 ". So its title | ID. I then have a calculated column to take the right 3 characters of the title, so it prints out the ID.
    So pretty much I have a title and ID that match the form library...
    now the hard part.
    Say I have 10 tasks in the tast list related to ID # 5 from the form library.
    Is there a way to create a repeating table or other solution to show these 10 tasks within the form library form? I was thinking a button to query for data from a secondary source (task list) filter where ID = current Item ID. then have it set a fields value???
    Anyideas???

    Hi,
    Here's an idea. When you are creating the task, populate a ReferenceID field in the task list with the item ID of the form library list. In this form, create secondary data connection to the task list and include the fields that you want to show. Drag the
    group on the form, it will create repeated section with controls. Create a formatting rule on the section, condition where ID!=ReferenceID, Hide this section.
    This will display the repeating data from the Task list where ReferenceID is = ID and hide all others.
    Another variation would be to Filter the Data Connection itself and add the condition in the filter (ID=ReferenceID). Hope it helps.
    Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

  • Assignment of task list after the inspection lot status is released

    Hi,
    I have applied a user status with  which i am able to release the inspection lot.After that i am going to assign a task list. But it is not getting assigned.
    please help me.
    Regards
    Vivek Deshpande

    Hi,
    Key date is same. I have checked for it.
    What i am saying is , i have manually updated inspection lot status to release state by applying user status. And after that i am trying to assign inspection task list to the inspection lot.But i am unable to do so.
    Can i do this ? Please help
    Vivek Deshpande

  • Task list creation in plant maintenance.

    Hi All,
    I have the function module /ISDFPS/TASKLIST_CREATE which was used in my program under one more Z function module, we have a XI integration also here earlier we were using service pack SP10 so this program was working fine as integration with other interfaces was working fine.Now the client has upgraded to service pack SP14 and so the standard FM got one more parameter T_CUOB which was not mapped because in SP10 it was not available. Pls can anybody suggest me what is this parameter T_CUOB and what is the business significance of it.
    The standard FM was used for creation of a task list in plant maintenance for Functional location, equipment etc.
    Vishnu.

    Hi Vishnu,
    I am just wondering if you got an answer to this question. We are having the same problem, but we do not care what the value is for t_cuob, therefore we need to default it to something like null or blank.
    Thanks

  • Set of Roles were deleted across the landscape.

    Hi,
    The set of roles were removed or deleted acorss the landscape long back and again i see the same roles in Quality system only not in any other systems.
    As i verified the change documnet of the role and system is hitting the message as "No change documnet found".
    Kindly provide me the solution as how it will re-buold only in quality system not in any other ssytems?
    SV

    >
    Sukumar Vempati wrote:
    > Hi,
    >
    > The set of roles were removed or deleted acorss the landscape long back and again i see the same roles in Quality system only not in any other systems.
    > As i verified the change documnet of the role and system is hitting the message as "No change documnet found".
    > Kindly provide me the solution as how it will re-buold only in quality system not in any other ssytems?
    >
    > SV
    Your Quality system must have been refreshed  from the system where the role already existed.
    If the roles were removed from Dev -> Qual -> Prod landscape and you are now getting it in Quality again, the possible reason could be your Basis team copying it from someplace where the roles where not deleted. And it is not showing in change document because the change was not done in that system from where it was copied.
    Check with the your Basis team if something was done in your quality system recently.

  • After installing OS X Mavericks, my cursor has been not working, by not even having a triangle cursor, just a set of lines, that expand across the whole screen when it goes over a random thing! Working on and off and getting worse, what should I do ?

    please help, need suggestions

    Hi sean981024,
    Thanks for visiting Apple Support Communities.
    If your cursor isn't working as expected, there are a few steps that can help isolate or resolve the issue.
    First, try booting your computer into safe mode:
    Mac OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/ht1564
    If the cursor is working normally in safe mode, this usually means OS X is fine, and the issue is caused by conflicting software in your user account.
    Next, see if Finder behaves normally in a new user account. The steps in this article also apply to creating a new user in Mavericks:
    OS X Mountain Lion: Create a new user account
    http://support.apple.com/kb/PH11468
    If the issue persists in safe mode and a new user, I would recommend reinstalling Mavericks:
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Best Regards,
    Jeremy

  • Error in executing process from the UWL task list

    Hi,
    I have created a process and assigned different users to different steps. For administrator, Overseer and Owner, i have kept role as initiator only. For the actions of the process, set the value as Initiation defined and in Default Roles tab, have assigned different users to each of the actions. From the URL generated on instantiation, i created a web dynpro iview and assigned it to a role R.
    The UWL has also been configured. The initiator of the process is assigned the role R.
    Now the issues are:
    1. When the process initiator opens this role R, an error is displayed " Page not found or not available", but the process gets initiated since an entry for the same is made in the UWL task list.
    2. Even when I click on the task entry in the UWL task list, i get the same error message.
    3. Presently if i click on the role R, then only entry is displayed in the UEL task list. Is there a way in which task may automatically appear in the task list of the initiator of the process without him/her having to click the role and then initiate?
    I am not able to figure out why this is happening. Can anyone please help me in this regard.
    Thanks & regards,
    Anupreet

    Hello Anupreet,
    Refer to these SAP notes
    1104652, 1131403 or 1026119.
    This should fix the issue.
    Let me know if this works.
    Cheers,
    Mandrake

  • Plant independent general maintenance task list

    Hi, All,
    Can it be possible to create a general maintenance task list without maintenance planning plant & which can be used for all plants in same client?
    This is required to reduce the common task list data per plant existing in the system.
    Regards,
    Sanjay

    Hi Sanjay,
    maintenance Planning plant & Work Centres may differ according to the Centralised & decentralised maintenance.
    Hence not only maintenance planning plant but alos work centres may also needs to changed.
    Logically each work centres planned activity cost may differ so if u create a common task list it will not serve the purpose too.
    Ref link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/ae33e04b8611d182ba0000e829fbfe/frameset.htm
    Ramesh

  • How to divide the UWL tasks listed in "Tasks" in different views ??

    Hello, i want to divide the tasks listed in the UWL in different iviews depening on whether they are tasks from the R3 workflow, tasks from the KM or tasks from the guided procedures ; in other words, i don´t wank one iview showing all the tasks together. I want to show just tasks from R3 workflow in one iview, task from the km in another and tasks from  guided procedures in another.
    How can achieve this?
    Thanks in advance!.

    Hi Themis,
    well, you could use the concept of configuration groups. You can assign every UWL system to none, one or multiple configuration groups (see <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/92/a88931f2dd4631b9e8d530697d89c9/frameset.htm">SAP Library</a>). The UWL iView can be limited to show only work items from systems in a given configuration group.
    I suggest that you assign your backend systems (KM, SAP Business Workflow, etc.) to different configuration groups (you can choose the names of the configuration groups arbitrary). Afterwards, create a few UWL iView instances and set the iView property "System Configuration Group" accordingy.
    Best regards,
    Martin

  • Task list or how to install and set up BW 7.0

    Hi Gang!
    I have the privilege of setting up a u201Cvirginu201D SAP BW 7.0 system.
    Does any on have a  u201CHow Tou201D or task list of the required preparatory steps?
    With transaction code or Program?
    For both Basis and BW activities?
    SAP published some very good upgrade guides along these lines, but I canu2019t find a list for a new installation.
    Thank you for your help,
    John Hawk

    Hi John,
    The steps provided by Ravi is for Installing precal Server but I understand your looking for help on primary installation of Frount End BI tool and other Component Installation. As you have mentioned it primary work of Basis to worry about. But for having overview you can look at below mentioned documnets
    Look into Front End Installation guide
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3a/431e02a4939240b510e851df092c50/frameset.htm
    YOu might me interested to read this interesting piece of information
    http://wiki.sdn.sap.com/wiki/display/subscription/InstallationCheatSheetforWindows-MaxDB
    SAP FRONTEND TOOLS
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID0690225450DB12415337244344821916End?blog=/pub/wlg/4495

  • What is the use of general maintenance task list?

    Hi expert,
    I want know What is the use of general maintenance task list in SAP plant maintenance & how to use this step by step.
    Regards,
    Ram Rathode

    Hi
    A task list in PM is created to perform a specific repair or maintenance task. The task list consists of work operations and components needed to complete the job. Often a task list will be associated with a functional location or equipment, where not tied to a specific technical object it is known as a general task list.
    Task lists can be assigned to a order, the operations/components are imported into the order. Task lists are also assigned to maintenance plans - once orders are generated from the plan the task list is transfered to the order.
    -Paul
    Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

  • I have two lists. The first is "Tasks", second is "Journal". I need a "Create Journal Entry" link in the Tasks list. How do I do that?

    Let's say I have a Task named "Build SSIS for Duke Energy" and it has another column called Active. Now every day I look at my task list and If I worked on that task I want to create a Journal entry of what I have done. So from the Task
    list I'd like a third column that calls the "Journal Entry" list's new form page and pass it in the ID of the task. I have found several TextToHtml scripts out there, but they have to be stored in a script library, and then sourced to a content
    editor web part. The problem is they don't fire when I have my list grouped. In addition to, every time someone creates a new view, I have to go in and add the Content Editor web part, point to the script....
    Any thoughts. It is the grouped view that really bug me.

    Hi,
    If you only want to add a hyperlink to create a Journal entry in the task list, I recommend to add a Hyperlink column in the task list and then create workflow to update the column.
    You can follow the steps as below:
    Open the task list, add a hyperlink column named Create Journal Entry.
    Create a workflow associated to the task list, start the workflow automatically when an item is created.
    Add actions as below:
    Then when a task is created in the task list, the workflow will be stared automatically to update the “Create Journal Entry” column.
    Thanks,
    Jason             
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Error while uploading the general maintenance task list with LSMW

    Hi friends,
    I am uploading the general maintenance task list with the help of Standard Batch/Direct input method in LSMW. I am using the internal number range for task list.
    First task list is getting created properly, but while creating second task list, system is giving the error as "external number range is not assigned for task list and task list with this group ID is already created in the system."
    This is because, on initial screen, system automatically takes the group ID of the task list that is created earlier.
    My question is
    1. How to get rid of the group number that is automatically gets populated in group field of initial screen, while creating the next task list?
    2. Is it possible to assign a common identifier in all structure (Header, Operation etc) for single task list, so that system can differentiate between two task lists?
    In Equipment task list, we can differentiate the task list with equipment id and group counter.
    Please note the following point before replying to my question.
    1. I don't want to upload the general maintenance task list with external number assignment.
    Thanks in advance for early reply.

    I have the same problem....
    Please can somebody help me?

  • Error loading file in the operation long text in the General task list

    Hi all,
    I couldnt upload the detailed check lists in the operations (operation tab) of the general task lists through the long text uplaod via Text->Upload->RTF---> .System is throwing the following Information...
    1.Error loading file " specified path with filename.rtf"
    Could you please give me any idea to eliminate this.The client is having the detailed check list for each and every operation with safety measures to be taken.
    Plz help.
    Regards,
    Suresh.

    Hi all,
    It was an authorisation object missing and the problem got solved.
    Regards,
    Suresh.

Maybe you are looking for