Stock not updated after GR with 103 & 105 movement types

Hi All
I have raised one GR(MIGO) with ref to PO and movement type as 103(GR for PO with GR blocked stock).
The same was released in MIGO using movement type '105'and stock type selected 'Unrestricted use'.
After first step, In MMBE stock updated under 'GR Blocked Stock'.
But after second step no stock was updated in 'Unrestricted use'.
the actual scenario is:
The receipts from vendor for a PO need to be blocked and then later should go to unresticted use.
Can any body help me how to address this and Tcodes need to be used.
Regards
Nageswara...

Hi GSC
Thanks for your reply and it is some what understandable.I have few more questions.
1.Is it possible to create PO with out Account and Costcenter not assigned. If so what is the impact.
2.My current settings were not allowing to create the PO with GL account and Costcenter.
M just confused with the "PO with account assignment" concept. Could you spare some time for this and help me to understand?
Thanks in advance
Nageswara...

Similar Messages

  • RG23A PARTI & PARTII register & tab is not updating in MIGO by 103 105 mvt

    Hi Experts,
    I am doing MIGO by 103 & 105 movements. My problem is RG23A PARTI & PARTII  register is not updating & also in Detail DATA (below the header details tab) Excise ITEM tab is also not coming.
    I have done the configuration like LOG GEN->Tax on Goods Movements ->under business transcations->Incoming excise details->specify movement types involve in excise invoices.
    Actually, after doing MIGO PARTI is updated in table J_1IPART1 but no values updated for J_1IPART2.
    Can anybody help me?
    Thanks
    Trupti

    Hello
    as per you part1 values updationg while doing the time of migo and part2 values not updating while doing the j1iex post .
    your not getting the excise tab on details so check the tax code mentioned in po assigned the co code or not ?
    if your using the TAXINN procedure check the condition records in fv12.
    check the j1id settings for material and vendor.
    Regards
    Laxman

  • Stock not updating after STO?

    There are two plants 5000 and 7000.Plant 5000 transfer material to plant 7000 with STO process. But after STO process stok of plant 7000 is updating (addition) but stok of plant 5000 is not reducing..Both  material document is showing right quantities .

    Hi,
    Check which MOVEMENT TYPE you are using when transference (issue) for that movement QTY UPDATE should be active
    go to OMJJ  and Put your movement type and then at left side option UPDATE CONTROL/WM movement type.
    It could also happen if the Delivery against STO is not created as in such case , stock is not reduced from the Supplying Plant. Else check the Settings at Plant Level in T Code OMS2 if it's happening for every Material from any of these two Plants.
    Sridhar.

  • Stock not updating after doing MIGO (gr) for third party sales

    i am doing third party sales, after creating PO with PR and updating stock through Migo , i am not able find the stock, but i can see through MB51 only , i am see the stock through MMBE or MB52

    Dear friend
    Hope you are clear about third party process
    In  third party process vndor supplies the goods directly to customer and the goods does not come to our premises at all
    In many of the scenarios that i have seen there is no MIGO itself done
    To have MIGO is purely optional in third party
    I am enclosing here with the threads which were discussed on the same
    Forum post in ERP - Sales and Distribution (SD) General: MIGO- why we do it in third party sales?
    MIGO- why we do it in third party sales?
    Forum post in ERP - Sales and Distribution (SD) General: Why MIGO is required in thirdparty scenarion?
    Why MIGO is required in thirdparty scenarion?
    The stock updation after MIGO is posted directly to consumption account and we dont keep the stock
    So it is not seen in MMBE or MB52 (which is a physical inventory orstock report)
    The stock is not there? How can you see that ?
    If still you want to see the stocks this is entirely against business logics and consult with your MM and FI colleagues (as this query is their area of operation)
    If the third party process is happening with item category TAB then stock updation will take place after MIGO and you can see the same in MMBE/MB52
    If not happening means there is some customization error with the PO from MM side Check with MM colleague
    Make sure if the item category is TAB then schedule line category is CB
    In VOV6 for schedulle line category CB
    NB is the order type
    0 is the item category
    E is the account assignment category
    Regards
    Raja

  • I have a problem with the iPhoto not updating after the hard drive recall.

    The iPhoto with not update after doing the Hard Drive Recall. It keeps saying I don't have the right ID. I have tried resetting all my passwords and no change. What do I need to do to fix this problem?

    Which OS version did you have when you acquired iPhoto and was it on a DVD (iLife) or did you download it from the app store initially?
    And, last question, did you skip Mavericks? Mavericks owners were given the opportunity to update iPhoto to an app store version free of charge; if you skipped it and do not have a backup or the installer DVD or purchased a new computer recently, then you'll need to purchase it.

  • Goods Receipts with 103 & 105

    Dear All
    We are Following 103 & 105 process for goods receipts , But we are facing some Problems in stadard process as follows
    1. while Posting MIRO for PO having Both 103 & 105 movement it is showing 103 Document as referance document in MIRO .But  Our requirement is to show 105 document as accouting entries are happing only at the time of 105
    How can I Update 105 document Number In this Field
    2. I want Pending Invoices Report ( MIGO done But MIRO not done ) MR11 is giving ressult as per requirement , Here Aslo I am
    Getting referance Document as 103 number which is not Useful for user , Here also i want 105 document Number  Or accounting Document Number of 105 as referance document
    How can i get this
    these Issue are very cretical for Business ,
    Please Provoide Suggetion
    Thanks & regards
    Advait

    Hi,
    Movement 103 and 105 are used in case of Gr blocked stock. Movemnet type 103 is used when there is conditional acceptance for the material. For example material ordered from vendor , for which quality certficate is not recieved. So goods are taken i conditional accepatnce with movement type 103 , For Gr blocked stock , goods remains non valauted and also quantity still remains open ordered quantity. After recieveing the certicate for gr blocked stock the material is accepted with movement type 105.
    So there is no question of generating a accounting document with movement type 103. To get the desired results I suggest you to make the goods acceptable with movement ype 105 by keeping material document as reference which is generated during 103 in MIGO.
    Regards,
    Tushar Patankar

  • Moving Average Price and Total Stock not updated for MTO scenario

    We are using MTO with planning strategy 20, individual collective indicator is 1 (individual requirement only) and price control is V for finished goods. We are facing the following problems after we perform GR of above FG from MFBF (Repetitive -run schedule header):
    1)Total Stock field (LBKUM)in Accounting View 1 remain as blank but the sales order stock is appear in Stock Overview screen.
    2)Moving average price does not updated after periodic settlement is carried out.
    It seem that problem can only be resolved if we change the planing strategy to MTS (ex:40), appreciate that if any of you can provide the solution.
    p/s: on ECC5 system.

    Hi,
    Good morning and greetings,
    The standard SAP says as below
    The Raw Materials should have MAP 'V' and the SFG and FG should have the price control as 'S' basically because the standard costing variant PPC1 uses the sequence of Standard Price as the first update at the time of price update and settlement.
    I presume MFBF is used for Repetitive Manufacturing and not for MTO scenario...Repetitive Manfuacturing is MTS scenario...Goods receipt of production order is normally done through MB31.
    If you still want to use the MAP for FG and SFG then you will have to change the costing variant appropriately to pick the MAP first at the time of goods receipt and settlement.
    Please reward points if found useful.
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • PO item change is not updated after Delivery completion

    Dear All,
    PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
    Regards
    Sujith

    Hi Dev,
    After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
    Rgs
    Sujith

  • Picked Quantity is not updated After delivery in Vl03n

    After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
    Is it any configurations needed or writng any code.
    For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
    But it is not stopping the Program.
    Please give any possible solution.

    Hi Vinod,
    Thank u For ur Answer.
    Just my Fuctional Consultant given Procedure.
    How to test the picking list. The problem is after Deliver  the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
    Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
    Output Type: EK00, Application: V4.
    Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type.  We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
    Now the picked quantity is not updated after picking in VL03n.

  • Node.length not updating after removeInstance

    I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
    For example, the form starts with 1 line item. (node.length = 2, index = 0)
    I can successfully add a new line item (node.length = 3, index = 1)
    I then can add another line item (node.length = 4, index = 2)
    I can successfully delete the last line item (index = 2) using the following code:
    var nodelength = form1.items.nodes.length;
    //need to know which instance is being removed
    if(nodelength>2){
    items.item.instanceManager.removeInstance(nodelength-2);
    else if(nodelength==2){
    form1.items.items.Status.rawValue = "";
    form1.items.items.guestName.rawValue = "";
    form1.items.items.Payment.rawValue = "";
    form1.items.items.Entree.rawValue = "";
    At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
    This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.

    This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
    Chris
    Adobe Enterprise Developer Support

  • Ipad mini apps not updating after ios8.2 update

    apps not updating after software update ios8.2 on ipaD MINI WITH RETINA SCREEN

    Turn off any auto-update, if it is on, then tap any of the "circle icons" showing that a download is in progress, in order to stop the download. Then go to the Settings and reset the Network Settings. After the iPad starts back up, then check to make sure no apps are currently in progress of downloading. If any are, stop them again, and reset the network settings again. When it starts up again, none should be in the process of downloading. Then from that point forward, only download manually and never more than two at a time. If it is more than 100 MB, then do only one at a time. If any gets stuck at that point, then stop the download and reset the Network settings.
    That should take care of you for now. We'll see what another update brings ... IOS 8.2 (which might be the next one).

  • Database history growth not updating after EHP upgrade

    Hi All,
    We are using SAP ECC 6.0 (731 - SP09 )  & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check  collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
    Please help me to resolve this issue.
    Regards,
    MK

    Hi MK,
    You can try few things:
    1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
    2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
    Try with Repair all collector.
    To make it work properly you have to perform
    Data Collection Full
    Data Collection Incremental
    Hope it helps
    BR Vaibhav

  • Average Active Sessions graph not updated after restart

    Hi,
    I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
    I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
    I also tried to clearstate and restart the agent but no change..
    Any idea?
    Thanks

    This is a bug and can be solved by applying
    Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
    This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
    Eric

  • Why do Apps not update after installing iOS6?  They just hang there!

    WHy do apps not update after installing iOS6?

    Each time? every day? Just plain crazy! Updates happen automatically on your mac....why not the same thing on ipad/iphone?
    If the app was purchased on my phone with my account, surely they do not need to "verify" my credentials each time. If my phone was stolen and someone purchased a $20 app surely my $300 phone is more important?
    They need to come up with e better solution...when we all have hundred or thousands of apps on our devices what then?

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

Maybe you are looking for