When do we get "asap mode disabled" message in IAP?

Q: When do we get "asap mode disabled" message in IAP?
A:  
When the "Autojoin mode" is disabled on the master and when the new IAPs which are trying to join this cluster unable to join and will try to come up as master by throwing this message  "asap mode disabled".
Solution: Enable "Auto join" mode or manually add the other IAP MAC address on the master such that those IAPs will come up as slave.
Console Output:
=============
        <<<<<       Welcome to the Access Point     >>>>>
asap mode disabled :.
process `snmpd' is using obsolete setsockopt SO_BSDCOMPAT
asap mode disabled :.
asap mode disabled :.
asap mode disabled :.
asap_send_elected_master: sent successfully
wait for stm to initialize over
asap_send_elected_master: sent successfully

Assuming there is a legal issue, I hope this thread does not get deleted.
Regarding Audacity - it will not display the drop down menu as the driver itself disabled the stereo-mix.  Re-enabing it using this patch will help.
However, I found the solution on a thread: http://forum.thinkpads.com/viewtopic.php?t=52527&start=60&sid=a136c428c5a38c58b573f3fa01c35d67
But basically, download the SoundMax driver from lenovo's website and extract it somewhere.  Then open up ADIHDAUD.INF located in SMAXWDM folder in the driver folder.
Find the line HKR,AD1984\\Disable, OutR, 1, 01 ;; Disable Stereo Mix Capture Node
Change the "01" to 00 and save it
Run "setup" and select "uninstall" existing driver - reboot
Run "setup" and select "install" new driver - ignore the Windows XP auto install setting and ignore the "non certified" driver warning - reboot
Go to start menu > run > type: "regedit" [enter] (without quotes)
Click on "edit > search" and look for AD1984.
For each registry key/folder of AD1984, find the subfolder/key that says MicBP and OutR and change their associated binary values from 01 to 00.  For some people, re-installing the driver in this fashion already produces a 00 while for others, the change must be made manually.
Reboot
Windows may give you an error that the SoundMax driver needs to be re-installed - this is NOT true.  You need to only re-install the Windows XP hotfix to re-enable the universal audio architecture.  This hotfix is available on the lenovo website here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68974
I do not know if this works for Windows Vista but it should would be happy to see if someone can try.  Otherwise, XP users should be good to go!
Message Edited by singularity2006 on 02-13-2008 09:12 AM
MOD edit - converted to clickable link.
Message Edited by Mark_Lenovo on 04-17-2008 01:04 PM
T61_Wide | Model No. 7662 - CTO
Core 2 Duo T7250 | 2GB OCZ DDR2-800
82566MM Gigabit | 4965AGN Centrino Pro

Similar Messages

  • I'm trying to share a video with Adobe Revel, however when exporting, I get an unknown error message.

    I am trying to upload a share a video with adobe revel, however I get an unknown error message at the start of the export. Has anyone got a work around?

    nigellow
    From your question, you appear to be working with Premiere Elements 12. On what computer operating system are you running Premiere Elements 12, and have you updated from 12 to 12.1 yet. Please see the opened project's Help Menu/Update.
    When you say share a video with Adobe Revel, are you referring specifically to taking your Premiere Elements 12 Timeline content through its Publish+Share/Private Web Album export choice or to some aspects of Adobe Revel in the Elements Organizer 12 that comes with Premiere Elements 12?
    Please review the details and comments in my blog post on the topic of Adobe Revel features in Premiere Elements 12.
    ATR Premiere Elements Troubleshooting: PE12: Adobe Revel Add Media/Publish+Share
    Based on the details supplied by you, we can decide what next.
    Thank you.
    ATR

  • How do I get my phone to work again when I have a "iphone is disabled" message?

    I need help resetting my iphone 4S.  I have the message "iphone is disabled".  How do I clear that so I can use my phone?

    The following has instructions: iOS: Forgot passcode or device disabled

  • Installed itunes on xp but when started I get 'Data Execution Prevention' message

    Have downloaded iTunes to XP but when i start the program all I get is an error text box with Data Execution Prevention message. We are running Firefox with AVG Anti Virus if this helps?
    Thanks
    SD

    Try updating your QuickTime Player to the latest version. Does that clear up the DEP errors in iTunes?

  • When Uploading Podcast, Getting a Connection Interrupted Message

    Hey everyone,
    I'm trying to upload my podcast from iweb to itunes (as I usually do anyway) and I am getting this error message which I've never seen before;
    Our connection was interrupted to this feed, possibly due to a timeout. The host did not accept the connection within timeout of 10000 ms.
    Does anyone have any idea what this could be? I've never had an issue before, but this is the first time since my updated leopard install and thus new iweb and itunes.
    I have been getting the message all day so it's not an issue that is only there for a few minutes.
    Thanks
    T

    I am getting the same exact error message. Perhaps there is an issue with the itunes servers tonight. I am going to try again tomorrow.
    From what I can see, the feed is working fine at:
    http://www.beccalori.com/beccalori/podcast/seo-expert-podcast.xml

  • How do i restore my apply tv settings when I keep getting an error 38 message?

    I recently got a apple tv from a friend and when I try to restore the settings or update the apple tv I recieve an "error 38" message. Does anyone know how to fix this?
    Thank You,
    tyee03

    See Here for your Error Message...
    http://support.apple.com/kb/TS3694
    See here for...
    Updating to iOS 5
    http://support.apple.com/kb/HT4972
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • What is wrong when I keep getting "Secure Connection Failed" message?

    Why am I getting the msg "Secure Connection Failed" on most sites I used to be able to access before power outage?

    Rename (or delete) secmod.db (secmod.db.old) and maybe also cert8.db (cert8.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the files.
    The file ''cert8.db'' stores your user certificates, so if you have user certificates then you may want to export them now and import them after having removed cert8.db.
    See Tools > Options > Advanced > Encryption: Certificates: View Certificates
    If that works then you can delete the renamed files or undo the changes if you want to revert the process.

  • Recently, i seem to have problems with a script that crashes my firefox 5. when i can get a "stop Script message, i get this :" Script: chrome://tabmixplus/content/tab/tab.js:561"

    i have the tabmixplus 0.3.8.6 extension and i had firefox 4 a few weeks ago and never had a problem.
    windows 7 ultimate edition
    java update 6.0.26

    that was useful. i tried to google the error, but the official extension forum did not show up at that time...it was listed, it seems to be a tabmix plus with colorful tabs error....i have disabled colorful tabs, cause its less useful than tabmix. thanks again for the help.

  • When trying to get updates it says that I am not conntected and to check my network.  How do I fix this?

    When trying to get an update, a message reads that it cannot connect and to check the network setting.  I can get the internet, so I dont know how the fix this. 

    Temporarily turn off the anti-virus and firewall software on your PC before attempting to get the update

  • HT1212 My sons old iPad 1 is rarely used, but, when i charged it up the message was "iPad is disabled try again in 22,824,852 minutes"  sorry but thats a bit of a wait!  I have gone through all the various reset methods but can't get around the disabled s

    Hello,
    My sons old iPad 1 is rarely used, but, when i charged it up the message was;  "iPad is disabled try again in 22,824,852 minutes"  sorry but thats a bit of a wait! 
    I have gone through all the various reset methods but can't get around the disabled status??
    Can't see another way to reset it.
    Could it be for the bin.
    Only wanted to give the youngest daughter the iPad to take to school.
    Hope someone can help
    Thanks
    Jonny Burns.

    Is this how you do it?
    1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune (make sure you have the newest version of iTune)
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

  • When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor.  How do I fix these?

    When I turn on my computer I get the following error messages:
    Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
    Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
    How do I fix these?

    Library/LaunchAgents: com.promethean.activmgr.plist
    Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
    Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
    HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
    These are the system extension errors
    "/System/Library/Extensions/AppleGraphicsControl.kext"
    "/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
    "/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
    "/System/Library/Extensions/BJUSBLoad.kext"
    "/System/Library/Extensions/EPSONUSBPrintClass.kext"
    I do not know what any of these do or how to fix them.  I have run multiple disk permission repairs & disk repairs.  The startup & system extension errors continue to come up.
    I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

  • I have the 5S and there is a check mark next to no sound when phone is in lock mode that prevents me from getting my calls and messages. How can I turn that off? Clicking it does nothing. Please help! Thanks!

    I have the 5S and there is a check mark next to no sound when phone is in lock mode that prevents me from getting my calls and messages. How can I turn that off? Clicking it does nothing. Please help! Thanks!

    Thanks for taking the time to try to help me. . I checked and the Do not disturb is off. The check is still there stopping calls from coming in when phone is locked. Any other ideas? Thanks again!

  • Why do I keep getting an account has been disabled message when trying to redeem a gift card?

    Why do I keep getting an account has been disabled message when trying to redeem a gift card?  Have gone back through account settings and don't see any problems with the account.  I have both mine and my daughter's account under mine.

    See http://support.apple.com/kb/TS2446.  If resetting the password doesn't fix things, you'll probably have to contact iTunes store support for assistance: http://www.apple.com/emea/support/itunes/contact.html.

  • Sorry the answer to my previous question did not help....when trying to get app message tells me I do not have acc or its been disabled. Is this because of joint usage of email as my partner has account with iTunes using same email?

    Sorry the answer to my previous question did not help....when trying to get new app installed on iPad  message tells me I do not have acc or its been disabled. Is this because of joint usage of email as my partner has account with iTunes using same email?

    Whatever the reasons are that you think the problem exists, you will not be able to resolve it on your own. Did you see this at the bottom of the support article that I suggested that you read?
    Additional Information
    If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance.
    You should probably contact iTunes Support.

Maybe you are looking for

  • Ipod lights up but is not recognized by computer  will die if usb disconnected

    My 5th gen. ipod recently stopped being recognized by my computer. I use a USB cable and when unit and computer are connected the ipod screen lights up and then goes dark.  The ipod click wheel and button do not work even when the screen is up (shows

  • Domain Name v IP Address

    Hi, I am running a windows 2003 network using a Microsoft exchange server. I have added imacs and other Macs to the domain with no problems they can see the exchange server and all accounts have their email addresses, however when I try adding an acc

  • Cannot process INBOX email

    Hi All. We have setup the IC WebClient Agent Inbox through the WS14000164 workflow, and we can see the email in the IC Inbox. However, when we click in the link in the column 'Main Category', the following error is shown: "Cannot process INBOX email;

  • "Mail Activity" messages don't make sense

    I see a lot of messages flying by in the lower left-hand corner about incoming messages yet often there are no new messages. Maybe Mail is doing some kind of housekeeping but the messages aren't useful because nothing obvious happens in my inbox.

  • OIA Email Template

    Hi, I'm trying to create a custom email in Oracle identity analytics. As far I understand, it seems to be there a restriction in OIA a) You can't use any variable outside from the pre-defined 35 variables of OIA. Is my understanding rite? If so then