When i clicked on erase all content and setting in my iphone3, it first shut down and next the apple logo appears and then nothing happens, how to fix it
when i clicked on erase all content and setting in my iphone3, it first shut down and next the apple logo appears and then nothing happens, its been 12hrs since like that. i tried force restart by clicking the home and sleep/wake button, and still same issue.
I believe with the 3G and the older iOS, erase all content and settings acts differently than the newer iOS. You can use this support document http://support.apple.com/kb/HT1808 to place the phone in recovery mode and restore it.
Similar Messages
-
I resets my iphone without disabling touch ID lock, it restarts, apple logo appears, and it stays like that, it never starts till now, just the apple logo and stays that way, please give a solution???
Hi ahmedsgh,
I'm sorry to hear you are having issues with your iPhone. If it isn't responding or starting up past the Apple logo screen, you may find the troubleshooting steps outlined in the following article helpful, in particular this portion:
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Regards,
- Brenden -
I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?
If it is otherwise working, you can change the battery. If you want to do it yourself, you can buy the part on eBay and other online sources. Just make sure you know the type of iPod you have so that you get the right part.
http://support.apple.com/kb/HT1353
There are online guides, including the ones on this web site
http://www.ifixit.com/Device/iPod
(Note: Most replacement batteries come with plastic/nylon tools seen in the guides.)
You can also have a repair business do the work.
If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes. -
i didn't close my mac air down properly and when i tried to use it, the screen was frozen. I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning. Can you advise?
Try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC) -
Why does the Apple logo appears and disappears when I'm the iphone 4?
When I'm using iphone 4 the Apple logo appears and disappears and appears lock screen. What to do? It' s a bug or a hardware problem?
Hi sarasalves,
Welcome to the Support Communities!
If the Apple logo is flashing on your iPhone 4, you may need to put the iPhone in recovery mode so that you can restore it. The article below explains how:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
I hope this information helps ....
- Judy -
When I use Siri, my screen goes blank and the apple logo appears and disappears. I've reset it, but problem still occurs. How can I fix this?
Did you reset your iPad like this: Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
-
when i start my ipad 3 the apple logo appears but then a loading bar appears and it stucks i have restarted it but nothing is happening pleeeeease help me! i love my ipad sooo much.....!!!
Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that does not help, you may have to restore your iPad.
iTunes: Backing up, updating and restoring iOS software.
If that doesn't work - You will have to use recovery mode
iPad: Unable to update or restore -
Macbook Pro BIOS requires at least 1 minute before the Apple logo appears and Chime sounds.
When I cold-boot my MacBook Pro, it takes a least 1 minute before I get the chime and Apple logo.
Some background on the problem:
After purchase I almost immediately installed Windows 7 on BootCamp and had no problems.
Around 8 months ago I bought a SSD drive and CD-bay kit, put the original HD into the CD bay and the SSD in place of the original HD, installed OSX on the SSD and formatted the original OSX partition, this broke the Windows install.
I tried in vain for around 2 months to repair the Windows partition without having to reinstall it to no avail, so I swapped the positions of the drives.
Since then the Windows & OSX partitions work fine, however from a cold boot it takes upwards of 1 minute before the Apple logo appears and Chime sounds, after that it behaves as expected (maybe 20-30 seconds and I'm fully booted).
Performing a soft restart behaves as expected too (Chime/Logo appear almost immediately and boot time is lightening fast!).
When I close the lid, it exhibits a similar problem in that it takes about 1 minute before it has gone to sleep and I can't do anything to wake it until that time has past.
It's not the end of the world, but it is slightly annoying, so any help would be greatly appreciated.
My guess is some kind of EFI/BIOS problem, but I can't find any other examples of this problem and have no idea how I might fix.When in OS X go into System Preferences and Select Startup Disk. Then select the OS X entry, even though you are in OS X, and reboot.
Some times the hardware gets confused as to which OS to boot and figuring it out can take some time. Once you select the OS X partition as the OS to boot to it should startup faster.
If not then you have some other problem that I am not familiar with.
You might also want to do a SMC reset, Google for the instructions found on the Apple KB site. -
My Ipad won't start up. The apple logo appears and just stays on the screen. after a while it starts blinking every minute
Try recovery mode as described here.
Note you may have to try to enter recovery mode more than one time to succeed.
HT1808 -
I just downloaded the software 6.1.3 on my i phone, 1 hour passed and it still didn't turn on. It just shows the apple logo on and off.
http://support.apple.com/kb/HT1808
-
On my iPod Touch, the Apple logo appears and then shuts off again. What do I do?
It has been doing this for a while. It became unresponsive so I turned it off and now it won't turn on. I know it's not dead, because I had just got done charging it all the way. I've tried almost everything and it still doesn't work. Help?
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
My IPad shut down this afternoon and now it won't start up. It's less than 1 year old. I tried plugging it in and pressing the on/off button. After holding the button in for several seconds, the Apple icon appears, but then disappears.
First, try this:
Plug it in to the wall using an Apple charger and Apple cable for several hours. The idea is to fully charge it.
Then hold the home and on/off buttons together for about 10 seconds. Hopefully the Apple logo will appear and it will start. Do not release the buttons until you see the Apple logo.
If it starts, great. If not, you say your iPad is less than a year old. If you bought it brand new from an Apple Store or Authorized Apple vendor, it is under warranty. Take it to an Apple Store or Authorized Apple Service Center for diagnosis and repair. -
My ipod touch 4th gen is a having a few problems with charging and turning on, my ipod comes up with the extremely low on power symbol and then i put it into my computer and it comes up with the charging symbol then it goes to the apple logo and then onto a blank white screen and then turns off and repeats that process i have tried various things including resetting my ipod trying to connect it to itunes but it doesnt come up with anything so i cant reset it on itunes and have tried various charging devices.
Tried it but it won't do anything all it does is make the screen do a very small flash of white and then continues doing the same thing appearing with apple logo then the white screen and off and keeps repeating that
I'm guessing the white small flash means it's been reset when I hold the 2 buttons down,
Thanks for suggesting. -
how to fix ipod touch if it hungs/ does not turn on and stays only on the apple logo when you press/hold the keys home and sleep/wake. and when connected to the computer, it does not appear in the itunes that the ipod is connected or simply the computer does not recognize the device. i barely need you help guys! please...
I found this possible solution on another support thread, so I tried it.
turn off iPod
hold Sleep and Home buttons to start it.
When Apple appears, let go of Sleep button, but keep holding Home button.
When screen goes blank, let go of Home button.
Connect cable and check iTunes to see if it has conencted.
This did not work for me.
I then turned off the iPod, restarted the Mac, and restarted the iPod normally.
I connected them with the cable, and it works like normal. :-) -
Hi guys, looking for some assistance with my 3GS. A few weeks back it started playing up. Shutting down suddenly and the like. Now, it's failing to start up. When I connect it to a wall charger, the apple logo comes on and after a short while it vibrates and then gives the 'connect to iTunes' message. The minute I disconnect from the wall, it just shuts down. If I keep it connected at the wall it goes through the above sequence before shutting down and repeats the cycle again and again.
I've tried all the 'recovery' methods without any success. The device is not recognised by iTunes. I've taken it to small independent repair outlets who say they can't repair it. Is there anything I can do or is it totally gone for good?It MAY have a bad battery, and that may be all it needs. But you can't find out until you replace the battery, and then you might find out it's something different. It's a 4 year old phone; consider getting a newer model. If you take it to an Apple store they should be able to diagnose it. Make a Genius Bar appointment before going to avoid a long wait.
Maybe you are looking for
-
How to prevent the logging of a single field in XI ?
Hi Guys, we have developed the interfaces for payment card services using the Enterprise services and the major problem what we are facing is to prevent the logging of the 3 digit security code in XI. According to the payment card industry standards
-
Hi, I have query like below. SELECT count(*) from table1 where batch_id in (select unique batch_id from table1 where <condition on dates>) and <condition2>; Its prepared fine and when opening, its getting core dump with segfault. The table has ~8cr r
-
Hi,supers, I want to activate a DS 0CO_OM_XXXX,but the "Active" botton is gray,and I can't change it(only display on the right mouse menu),the version of this DS is "modified",I want it "Active",what can I do? thanks!
-
Importing multiple proj (just name, start & end)
Anyone know how to import a list of projects (just project name and maybe start and end date..no detail or activities necessary) into P6? I have my current list of project names in Excel. Thanks Peter
-
Hi there, I am currently learning java and need help with this problem i am having. For some reason when i try and display an image in this user interface nothing comes up. Ive tried various different images and have made sure the image is in the sam