Win 8.1 + Kinect V2

Hi, i would like to know how to control Windows 8.1 with Kinect V2 cause i can't do it with just the SDK.
my usb 3 is an onboard renasas controller the driver don't work so i used the windows default one who work
the KinectV2ConfigurationVerifier crash when i use it with this error:
KinectV2ConfigurationVerifier.exe Version du Framework : v4.0.30319 Description
System.Management.ManagementException Pile : à System.Runtime.CompilerServices.AsyncMethodBuilderCore.<ThrowAsync>b__4(System.Object) à System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) à MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object,
System.Delegate, System.Object, Int32, System.Delegate) à System.Windows.Threading.DispatcherOperation.InvokeImpl() à System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(System.Object) à System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext,
System.Threading.ContextCallback, System.Object, Boolean) à System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) à System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext,
System.Threading.ContextCallback, System.Object) à System.Windows.Threading.DispatcherOperation.Invoke() à System.Windows.Threading.Dispatcher.ProcessQueue() à System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) à
MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) à MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object) à System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) à MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object,
System.Delegate, System.Object, Int32, System.Delegate) à System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32) à MS.Win32.HwndSubclass.SubclassWndProc(IntPtr,
Int32, IntPtr, IntPtr) à MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef) à System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame) à System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame)
à System.Windows.Threading.Dispatcher.Run() à System.Windows.Application.RunDispatcher(System.Object) à System.Windows.Application.RunInternal(System.Windows.Window) à System.Windows.Application.Run(System.Windows.Window) à KinectV2ConfigurationVerifier.App.Main()
But all SDK simple works exept the VisualGestureBuilder preview i got black screen while the VgbView work
also i used the software UBI to control win 8.1 and it work without problem for gesture
i used FullFastKinectCamV2 to use camera & micro with skype desktop version
so i think it is not a hardware issu with usb3.

You cannot control Windows 8.1 with Kinect Runtime and SDK just out of the box, this is not an included functionality. If SDK demos are working (ColorBasics,
BodyBasics…) I understand that there is no problem with your system/configuration.
At present, you have to write your own software if you want to control an application with Kinect. You can have a look to ControlBasics demo to see how it works.

Similar Messages

Share your opinion on Adobe Contribute for a chance to win $500USD!

Share your opinion on Adobe Contribute for a chance to win
one of five $100USD gift checks or one $500USD gift check!
Take the survey now:
http://direct.adobe.com/r?xJvPqWTEJcqTHEcHqTJlH
In exchange for taking a short survey about your opinions of
Adobe Contribute, you will have the option of participating in a
drawing for a chance to win one of five $100USD gift checks or one
$500USD gift check.
Your responses will remain confidential. No information about
you will be sold or furnished to any other company whatsoever, nor
will you receive unsolicited emails because of your participation
in this survey.
Full list of rules:
http://direct.adobe.com/r?xJvPqWTEJcqTcEcHqTJlc
To take the survey, please visit:
http://direct.adobe.com/r?xJvPqWTEJcqTHEcHqTJlH
Ramesh Gopalakrishna
Product Manager
Adobe Contribute Team

Hey SpiceHeads! We know you’re often running around saving the day for your company, and your valiant efforts are sometimes overlooked. At Brother we’d love to reward your hard work and innovative thinking! Share one of your heroic IT acts in the comment section below for a chance to win one of two gaming prizes!First prize will get aMicrosoft Xbox One with Kinect.Runner up will get aSony PlayStation 4 Console.The prizes don’t stop there! We’re also giving anEVGAGeForce GTX TITAN X Suplerclocked graphics card!For a chance to win the grand prize,simply fill out the form located here.Also, the first 10 SpiceHeads to post their story and complete the form will be given a special mystery swag bag from Brother.May the odds be in your favor!End date: 8/14 US only.Terms & Conditions
This topic first appeared in the Spiceworks Community

Kinect for windows sdk 2 speech

hello am new to the forum ...
I need a good tutorial on voice recognition kinect for windows sdk 2
I tried the basic example of the SDK but I ridponde: Could not find kinect speech recognizer.....
any solution??
i have install:
kinect sdk 2 for win
speech sdk and language pack ita and en

GTX460 is not a DirectX 11 based GPU. Additionally given that is the GPU chances are you are not running a supported USB3 chipset as provided in the link.
See the troubleshooting guide: https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
Carmine Sirignano - MSFT

Kinect for windows speech basics : could not find kinect speech

hello
i am try to run the basic example of sdk 2 for kinect
but i get this message:
could not find kinect speech recognizer....
any solution
sdk 2 for kinect install
sdk speech and language pack enUs and itIta install
any solution??

hello am new to the forum ...
I need a good tutorial on voice recognition kinect for windows sdk 2
I tried the basic example of the SDK but I ridponde: Could not find kinect speech recognizer.....
any solution??
i have install:
kinect sdk 2 for win
speech sdk and language pack ita and en

Kinect for windows v2 SDK and v1 sensors

Before upgrading to win 8 to utilize the Kinect for Windows SDK 2.0 I want to know if it is backwardly compatible with the v1 of the sensors.
Thanks

There are technical ways of doing it but requires that you create your own separate .dll's that will wrap the v1 and v2 libraries in their own wrapper so the namespace collisions don't occur. Then you use your .dll within your application. I have a snippet
of code of how to do this in my GitHub account:https://github.com/carmines/workshop/tree/master/WPF/KinectV2andV1
Then there are the image resolution and camera intrinsic values you need to concern yourself with if you intend to try and mix the values together.
Carmine Sirignano - MSFT

Kinect 2 partially works on intel and renesas usb3 chipsets

hello,
i have gigabyte ga-z77-d3h mobo, win 8.1 x64, kinect 2 for windows and KinectSDK-v2.0_1409-Setup.exe
this mobo has two usb3 chipsets, intel and etron ej168, also has stlab-u 780 pci-e controller (Renesas/NEC µPD720201).
when connected to intel or renesas ports kinect is detected, but in KinectV2ConfigurationVerifier.exe usb marked like warning and working not all the examples,
that works; (two white led lights and 3 reds ) color basic sample, audio sample, infrared, fusion, depth.
that not working; (lights only one white led and 3 reds) body basic sample, body index sample, control basic, coordinate mapping, face.
with renesas used default windows drivers, because if use official renesas driver, then an error - This device cannot start. (Code 10)
as already know that if connected kinect to etron usb3 port when is not supported, it`s clear
what could be the problem with intel and renasas?
thanks

2 USB3 chispets on board? Are you able to confirm which USB3 ports are using the Intel? Review the troubleshooting thread for known issues and common workarounds.
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
As for the tool crashing, there may be an issue with query the driver and that is where it is failing. We seen a similar issue come up on another thread. If you can run all the samples at 30fps without issue, then you should be fine to ignore.
Carmine Sirignano - MSFT

USB 3.0 Controller compatibility problem Kinect v2

I installed Kinect for windows and just run Kinect v2 Configuration Verifier.
And I get some Issue:
-USB Controller
says that: "Result: Supported USB 3.0 port detected with unknown bandwidth. Kinect may or may not be compatible with your hardware."
-Verify Kinect Depth and Color Streams
says that: "Detects depth and color stream latency ---- Result: Waiting for frames from Kinect"
The last problem i think that is a
consequence of the first problem (usb control), but i am not sure.
If I use kinect studio, I have a grey monitor live, and i don't see nothing, I can't register anything.
I have install and update all driver.
This is my pc configuration:
Motherboard: Asrock Z87E-ITX CPU: Intel i5 4440 3.1Ghz RAM: 8Gb DDR3
VideoCard: msi amd radeon R7 250
Thank you in advance for your advice and opinion on a possible solution of my problem! :)
With this usb problem i can't work.
Need Help

Hi
I’m hoping that someone here could answer my question. I’ve pretty much got the same problem. My Kinect Configuration Verifier is
X on for the USB Controller.
I understand the native ASMedia® USB 3.0 controller isn't supported and am using the same 'Transcend
PDU3 USB 3.0 card', which worked for GiroMa
(posted above).
This card is seated in a PCIe 2.0 x16 and SATA powered.
My Kinect for Windows v2 is connected to this card, which is listed as ‘Renesas Electronics USB
3.0 Root Hub’
The Chip set for my motherboard is Intel® Z68, where I'm running an i7. I’ve updated the BIOS
and running Win 8.1
GiroMa
seemed to be able to get USB detection using the same
‘Transcend PDU3 USB 3.0 hub’
as I have.
I don’t however have
PCIx Gen 2.0 enabling in the BIOS choices though. I only have the 1 PCIe 2.0 x16 slot, so I hope it should default to this?
I’ve been reading these postings for the same issue last 5 days trying to understand if its my
motherboard as I've been doing everything that has been suggested ... or is their something else? Connecting a Kinect v2 to Windows 8.1 appears to be a black art.
Thanks for any help here you can offer.

Install win 8.1 error looking for disk

I have a new Mac Mini w/ Mavericks OS. I have been trying to install Win 8.1 for days. I had a keyboard on order, finally came today to allow me to Recover the Mac from a failed Win 8.1 install. I have read hundreds of conversations on this topic. And to air one question constantly asked, 'Why! Why is it that there are dozens of different ways people are having to use to install one program? Why?!?'
I am able to get to the page in Windows setup where I am to select the drive called BOOTCAMP.
I select the drive
I then FORMAT the drive
Then I am told that drive - or any installation for Windows drive - is NOT found or available.
I've gotten to this screen a dozen times now.
I have arrived there by two methods 1) following the 'book' on Win 8.1 installation via BOOTCAMP and 2) Once here I shut the machine down and reboot with CTRL-key at restart -> select the WINDOWS drive from those available -> then follow the Windows install panels. Which, every time leads me right back to this page.
A note about this page. Every online tutorial, including the one on the Windows site and here on Apple forums, shows a DIFFERENT layout of the page. The tutorials show a page with a link to click for Advanced settings. My window just shows those Advanced settings. I don't see how this makes the process work or not, but that's a peculiarity of my setup woes compared to the instructions that exist.
NOW .. HOW in the name of all that is sensible!! -- do I get from the page where I select the partition I need to install Win 8.1 on..?
Again ..PLEASE!!! DO NOT retroute me through all the old settings everyone has been hashing about since September 2013. I need to know What Works NOW - January 2014- to get Windows 8.1, installed and working on my Mac Mini running latest version of Mavericks.
Thank you ... I HOPE!

Windows 8.1 is not yet officially supported in Bootcamp. There is no way to know when it will be supported.
Having said that some systems will install it and it runs fine, though these systems appear to be few and far between.
The only advice I can give is to try some of the workarounds available on various sites or wait until it is supported by Bootcamp.

Running Dual boot windows 8 and win 7 pro with xp mode installed!! I love it!!

It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
Step 1: using diskmgmt.msc you have to shring the C partition. I shrunk it so I had 80GB remaining as unallocated space.
Step 2: You have to enter the machine Bios adn set the BIOS to Both and UEFI as first
Step 3: Connect your usb dvd
Step 4: Put your win 7 pro dvd in the usb dvd drive
Step 5: Reboot your machine and when it starts press F12 to get the boot menu and select the usb dvd drive then press enter
The machine restarts
Message on screen says press a key to boot from cd/dvd
Press space and it boots up the win 7 pro DVD
After files copy and load the setup screen asks to accept the agreement and where to install win 7
BE SURE TO SELECT THE 80GB location
Then follow thru the win 7 prompts to load it.
When the machine restarts you will see a dual boot screen with Windows 7 on top as first selection and Windows 8 below it as 2nd selection.
Make sure to hit enter with windows 7 selected
The win 7 installation completes.
You will see many items with drivers not installed dont fret.
You can load most of the drivers by highlighting the device in control panel/device manager and pick update driver then select BROWSE for DRIVER and be sure to put in drive D:\ which is now the windows 8 drive and hit search.
Many of the windows 8 drivers installed with no issue.
The Realtek driver was an exception .. goto to the lenovo site and pick the x100e tablet and download the LAN driver from there about (4MB). Copy it to flash drive and install it in win 7 from the .exe file. The driver for LAN will install sucessfully. The version of the driver is 7.46 something the 7.11 versions do not workl.
I have only 3 drivers that I could not find - 2 list as unknown and are related to ACPI or power management and 1 lists as USB controller but all the USB stuff works without it.
Be sure to either shutdown the system or sign out of win 8 when your done so you get the dual boot menu. If you shutdown while logged into win 8 the next time you start up it will go right to win 8 until you signout and restart.
Just to let you know an easy way to shutdown is go to the desktop and press ALT + FN + F4 and a shutdown menu comes up on the desktop.
Once win 7 pro is installed you can download the XP mode free from Microsoft and install it.
This is of course AFTER you have ACTIVATED WINDOWS 7 ONLINE with YOUR ACTIVATION KEY(you supply).
ENJOY! This is the BEST machine I ever had!

It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
dfw1417 wrote:
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
ENJOY! This is the BEST machine I ever had!
WHICH machine?
Cheers.
If I helped you, please give me some kudos! ^^

Can a Mac and a Win share the same music library on an external?

I have a Powerbook, my wife a Toshiba laptop, both are authorized under my account. She's relatively new to iTunes and ipod so she has a small library on her Win machine. My Itunes library has grown so large I'm about to move it to an external drive. I'd like her to be able to access that library to load her ipod.
Is it a matter of formatting the external the correct way?
Powerbook G4 Mac OS X (10.3.9)

Interesting question!
I think the answer is FAT32, but I'd rather you tried NTFS first.
grin

TS1363 I was upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7. The iPhone hung. It is no longer visible by iTunes on Win 7

While upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7, the iPhone hung. I could not get iTunes to find it and Win 7 does not see it.
When I connect the iPhone to the USB, Win 7 issues the welcome sound, but that is it. The same happens when I disconnect iPhone.
The Devise Manager has the Apple Mobile Device USB Driver correct without any problem. I updated this driver called usbaapl64.
The iPhone is still hung.
I restarted the iPod service
I restarted the Apple Mobile Device Service
I tried to empty and delete the temp directory in C:\users\myname\AppData\Local\ but could not
The iTunes I am using is the latest version
I updated the Apple Mobile Device Driver as stated above correctly
The iPhone is still hung and is not recognized by Win 7 or iTunes, so I cannot restore the OS to the previous working version
What else can I do to restore the previous working OS on my iPhone 4

I was connecting the iPhone 4 to a USB 3.0 port. I was told by Apple Express Support (at US$29.99) not to use USB 3.0 and to use USB 2.1 instead.
If you are connecting your iPhone to the computer using a USB 3.0 port, disconnect it immediately. iPhones will lock up if you try to update while using a connection through a USB 3.0 port.
Disconnect the iPhone from the computer
Go to Device Manager and find the connected USB port. Click the mouse right button and update the driver
Shut the iPhone by pressing the sleep button and the home button concurrently for some time
Move the USB cable to a USB 2.1 port or older without the iPhone.
Restart iTunes.
Connect the iPhone
Your computer should recognize the phone and reloads the correct USB 2.1 driver (Apple Mobile Device)
Then iTunes should recognize the iPhone and starts reloading the firmware.
When that is complete it may ask if you wish to restore, naturally you say YES
iTunes will restore the iOS
Using iTunes, restore the latest backup to get your data back.
When all of the above is completed. Start enjoying your iPhone.
If the above does not work. Throw your iPhone out of the window and get a replacement Android phone.

Windows Easy transfer , ERROR message when trying to copy settings to Win 8 PC

I have a new hp-TouchSmart Envy 23. It has 2TB drive.
I want to use Windows Easy Transfer to move all my settings and data from the Windows 7 machine to the new hp-TouchSmart (my older PC is hp desktop is model # m9177c and has Win 7 OS) .
I have used easy transfer many times and I am reasonably experienced user .
I just cannot transfer my settings and data to my new PC. I have therefore copies all my data to the hp-TouchSmart . However I need to use Windows easy transfer to move all my settings. I have a very large number of settings , macros and much else that would take a very large amount of time to re-type.
I get an ERROR message when I want to transfer my settings. It says I don’t have enough disk space. The file I want to transfer is only 10.5 GB (after I removed all my data). The new machine has 2TB and yet I keep getting this error.
I have tried every possible way of transferring the settings , including : external drive; flash drive; direct wire ; easy transfer cable etc. I keep getting the same ERR message .
I am sure Easy transfer must allow transfer from Win 7 to Win 8. BUT HOW?
PLEASE do help. I would really appreciate very much .
THANK YOU
Adam

This thread may be useful.
Windows Easy Transfer will transfer from one drive to the other to mirror the original drive. What I suspect is happening is that the program is grabbing the D drive (recovery partition on most systems) and trying to transfer it to the new system which should also have a D drive. If that is happening,t hen that error will be thrown.
Try using the advanced options and view the report to see what exactly is happening and triggering the message.
Let me know what happens.
The document in the thread is for a previous version of Windows, but you can search for Easy Transfer Reports from the Start screen in Windows 8.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Update frome win8 to win 8.1 error oxc1900101 - ox30018

I have purchased at Toshiba laptop including win8.
After release, I installed win 8.1 easily, following common procedure. It worked perfectly and I was quite happy with it.
Due to some hardware issues, I turned the laptop in for repair.
The motherboard was replaced with a new one, and win 8 was reinstalled when I got the laptop back.
Obviously, I wanted to update to 8.1 once again.
This is where all my problems started.
Apparently the update is being installed, but at 95% of the install process done, it stops and reinstall win8 again.
The error codes oxc1900101 - ox30018 are displayed on the screen.
I have now spent months reading on that same problem online, and tried a lot the proposed solution, but with no luck.
I found many many people who had trouble updating, so clearly, there IS a problem with win 8.1
I have called Microsoft support, who said that Toshiba was responsible.
Toshiba says to contact Microsoft...
Microsoft wants me to pay 99$ for support, so they will fix it.
But it is supposed to be a FREE and very easy update - why would I pay for that?
I have tried to update drivers, clean start, reinstalled win8 a lot of times, uninstalled anti virus and anti malware, went into bios and disabled usb3, used lan cable instead of wi-fi and many more things, but the same error code still appears every time.
I really hope someone can help me - PLEASE PLEASE!
I don't think it is fair, that I have to buy a new license for win8.1

H Dennis,
When you roll back to the Windows 8, did it work fine? Was it activated? OEM's license is binding with motherboard.
If you change motherboard, it will not be activated.
Please contact Toshiba to activate it. Then try to upgrade.
The most cause is the hardware compatibility.This guide will be help you check if your computer meet its requirement:
Update to Windows 8.1: FAQ
http://windows.microsoft.com/en-IN/windows-8/upgrade-to-windows-8
If the issue still persists,upload the setup log file here in order to provide further help.
http://technet.microsoft.com/en-us/library/hh824819.aspx
Karen Hu
TechNet Community Support

Satellite Z930-14F - cannot install Win 8.1 from SCCM 2012 R2 environment

Dear all,
Sattelite Z series laptops cannot install OS (win 8.1) from our SCCM 2012 R2 environment.
Either no installation is starting, or pxe boot aborted error is showed.
The environment is used to successfully install OS (win 8.1) on different other vendor computers (dell) and virtual machines (hyper-v and vmware).
I've tried both UEFI and CMS boot options and tried to switch off the secure boot. Please advice.
Also, i've read about the "SCCM installation package for Toshiba". Will it help in my situation or is it just driver packages for SCCM?
Best Regards, Evgeny.

I guess you are speaking about this Toshiba package:
http://www.toshiba.eu/services/on-demand/business-computing/sdp120gs-v/
I dont have much experience using such SCCM drive package but it definitely compatible with the Toshiba business notebooks. The Satellite / Portege Z930 belong to the business range and I think the package should be compatible.
This package seems to be for all IT administrators who manage devices on the corporate network with SCCM 2012 R2. Toshiba offers with the new Toshiba SCCM package a solution to integrate other notebook into an existing IT infrastructure quickly and smoothly and all Toshiba Driver and application packages and a demonstration task sequence are integrated.
However, it seems that you could get more details about this package directly from Toshiba [email protected]
By the way: The Win 8.1 installation requires the UEFI mode (in case the UEFI BIOS is available). But booting from another, external source requires the disabled secure boot option.
So maybe you should use the UEFI mode but should disable the secure boot option in order to boot from LAN.

Win 8.1 + Kinect V2

Similar Messages

Maybe you are looking for