Wrong records do not appear in PSA

Hello,
I have a problem, because some wrong records in a load do not appear in PSA errors.
They are duplicated in the start routine of the update rules, so they are not original from the source system, but created modifying the data_package table in the start routine. So, when you make a load to a cube, the load fails, but it is not possible to go the error psa.
Does anybody know why the PSA is not generated?
Regards, Inma

Hello,
Wrong records? Anything which is posted in R/3 will be picked up in psa.
if there are special characters, only then the psa may highlight them as incorrect.
but if there is any mistake in say the date input or any field input(i.e wrong value input by mistake from the drop down), psa won't know if it is wrong from business point of view.
Such incorrect values need to be validated by R/3 side. Anything that is posted in source system is simply picked up in psa.
Hope it helps..
thanks,

Similar Messages

Moved recording does not appear as content

I recently encountered an issue where, when I attempt to move a recording from under a meeting to a Shared Content folder, either the list of Shared Content folders does not appear or, when the move is "successful", the recording is bot listed in the new content location. Interestingly, if I change the URL of the destination location from "content" to "meeting" (http://server/admin/content/sco/... to http://server/admin/meeting/sco/...), the recordng will appear in the list. Unfortunately, under this "meeting view", there is not any editing or offline functionality. The link for the recording continues to be functional and playback works normally, but the recording is otherwise treated as a "meeting" rather than content.
Using the API, I used the sco-by-url XML action to compare the values of an affected recording to an unaffected one, but could not find anything that appeared unusual. Both recordings were identified as the "content" type.
Atempting to edit the video, or make an offline copy, by modifying the usual link produced by clicking those button with the appropriate url-path generates a "Not Found - The selected resource does not exist" error. The editing and offline copy processes worked normally prior to the move.
We are currently running Adobe Connect version 8.2.0.0:
package=8.2.0.1.156.20110921.963902
installer=8.2.0.0.11.20110728.938680
fmg=8.2.0.0.4.20110906.879854
fms=8.1.1.0.2.20110427.772086
presenter=8.2.0.0.6.20110824.924658
cps=8.2.0.1.3.20110920.973276
mssql=8.1.0.0.10.20110311.8644363
teleintercall=8.1.0.0.2.20110207.776631
telepremierena=8.1.0.0.21.20110412.882778
telepremiereemea=8.1.0.0.21.20110412.882778
cpshelp=8.2.0.0.4.20110908.964981
addins=8.2.0.0.3.20110831.929039
dbscripts=8.2.0.0.23.20110818.956139
teleavaya=8.1.0.0.4.20110412.882778
telecisco=8.1.0.0.17.20110412.882778
telemeetingone=8.1.0.0.2.20110207.776631
telephonyservice=8.1.0.0.8.20110228.847019
tomcat=6.0.29
stunnel=4.28
Is there another mechanism Adobe Connect discerns between the content and meetings so far as under with view/interface it will be displayed? Is there a way to correct this behavior for existing files? Thanks for any insight.
Eric

Having support look at this may be the best option. Since you are using your own server, you should call 866-335-2256, wait for the second round of prompts and then option 1. Have your support contract number ready when you call.

Customer material information record is not appearing in SO

Hi,
I have maintained the customer material information record in VD51, after maintaing also it is still not appearing in so. Plz mention the possible reasons why it is not appearing in the so.
Thanks and Regards
P Santhosh Kumar.

Hi,
Check if in T.Code VOV8 you have selected the "Read Info Record" check box for your sales order type.
This should help. Let me know if it is still not resolved

Results recording tab not appearing in QA32

hi,
can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?

Just check which roles are added to that used id
selec 1 role that is relevent to inspection (result recording) and add QE01 t_code in that role.
take help from ur basis guy for this.

Result recorded values not appearing in printing the Inspection lot

Hi all ,
Using QC21 i am printing the Inspection lot but the Result recorded values are not appearing in printing the Inspection lot .
while creating the certifacte profile i had maintained the MIC for which i had saved as Summary for recording . if i change this to Orginal value it says that this doesnt exist in the Inspection plan .
can somebody help me on this .
thanks ,
ksr

Hi
1.Make sure that you are using same MIC in Task list & certificate.
2.make sure that you have done RR & taken UD.
3.make sure that MIC is reference MIC.
4.Make sure that profile is attached to material
Regards
Sujit

Records Management not appearing in my folder/file properties

I just did a fresh install of OCS_101200.tar.gz . I enabled records management using the steps described in http://download.oracle.com/docs/cd/B25553_01/content.1012/b25275/scenarios.htm#FLSAG129 . I can log into the /rm webapp and create file plans, records policies, etc. But when I right-click on any object in the Collaboration Suite web interface and click Properties, Records Management does not show up as a menu option. Is there an easy fix, or did I mess up the installation?

Hi ckonstanski,
as far as I can remember you have to define at least one record category in the RM Web client ( http://your.OCS.com/rm ) to make the Records tab visible in CS Web client.
Kind regards,
- Roland

An orphan photo will not appear in "All Images"

I have one picture in a project that does not show up when I go to "All Images" in the Library. I "imported" this picture from my desktop "Into the Aperture Library" but it did not show up in the Library.
Why doesn't it appear in "All Images"? All other images appear there.
Thank you for any help.

I should have said Smart Album.
If you control click on the library icon you will be able to select New > Smart Album. With that you can select all images (ie no filtering). That should show your missing image.
Is the date correct on your missing image? If the date is wrong, it will not appear where you expect it to. See here for some information on smart albums:
http://www.bagelturf.com/aparticles/library/smarta/

HT1766 i have moved from an iphone 4 to iphone 5 and have done a back up of my iphone 4 and restored this back up to the iphone 5 but the apps do not appear to have come across, have I done something wrong? Please can someone tell me how to move my apps

i have moved from an iphone 4 to iphone 5 and have done a back up of my iphone 4 and restored this back up to the iphone 5, but the apps do not appear to have come across. Have I done something wrong? Please can someone tell me how to move my apps across?

After you Restore from backup, sync the iPhone.

Folders on the IMAP server do not appear or appear in wrong location - those cannot be modified in Thunderbird because "they do not exist on server".

Hi all,
A few days ago, I moved 3 sub-folders within my Archive folder. I was doing those modifications using Thunderbird.
My Archive folder used to contain the following sub-folders:
Archive
/A2014
/B2014
/C2014
I tried to move the folders A2014, B2014 and C2014 under the sub-folder LastYear, and created new A, B and C folders for 2015, so that it would be something like:
Archive
/LastYear
/A2014
/B2014
/C2014
/A2015
/B2015
/C2015
On the webmail interface, everything looks fine: the old A, B and C folders where moved into the Archives/LastYear folder, and the new A, B and C folders appear under Archives. However, on Thunderbird things are a bit more... strange.
Case 1: For some folders, things are as they should be.
Folders A2014 and B2014 were correctly moved into Archives/LastYear.
Folders A2015 and C2015 were correctly created in Archives.
Case 2: One folder does not appear at all - anymore.
Folder B2015 does not appear anywhere - despite being visible on the webmail interface. It does not appear in the list of folders to synchronize. No .msf file appear. Nothing happens if I try creating it again.
Note that it briefly existed after I created it, but stopped appearing a few hours later.
Case 3: One folder appears in the wrong location and cannot be accessed.
Folder C2014 appears in the old location (Archives) and not were it should be (and is on the webmail interface), that is Archives/LastYear. I cannot perform any operation on it in Thunderbird, I systematically get the following error message:
"The current operation on 'C2014' did not succeed. The mail server for account <AccountName> responded: "Archives/C2014" doesn't exist."
(Which is correct because according to the server the folder C2014 is in Archives/LastYear).
The C2014.msf file is also wrongly located, but moving it to the correct location did not change anything: the next time Thunderbird was started, the wrongly located .msf file was re-created.
Thunderbird does not show the emails contained in this folder - when I try loading them I get the previous error message.
Using the same style than before, here is how my Archives folder look right now:
Archive
/LastYear
/A2014
/B2014
/A2015
/C2015
/C2014
I am totally flabbergasted, I have no idea of where the problem is. I tried various fixes found on forums (such as playing around with the .msf files), but no luck so far. Any idea?
A few more details:
- I use an IMAP server.
- This is a professional address, and I have little control on it.
- I use Thunderbird with this account on two different computer, the problem is identical on both computers.
- I tried removing/re-installing the account from Thunderbird, it did not change anything.
I would be eternally grateful if any of you could come up with a solution!
Many many thanks,
Agnes

I know my files downloaded through Firefox won't appear in my downloads folder because that is just supported by Safari
No, I think that Apple just assigned the Downloads folder to Safari to send things there by default. You can do the same with Firefox, just go to the Firefox Preferences, click on main, tick the "Save files to..." and click the Choose button, then navigate to /Users/yourname/Downloads and click choose. I have always had all my Internet applications download things to a Downloads folder I keep at the root level of the drive (so all users can access them), but I just changed the Firefox pref to the new Apple Downloads folder and it worked fine.
Francine
Francine
Schwieder

VALUATION NOT APPEARING IN RESULT RECORDING

Hello....
I have created an inspection plan where i have assigned all the characteristic to be inspected with quantative data.
Upon goods receipt inspection lot is generated,
while doing result recording when i enter the result for eg. if the characteristic value is 1-10, and i enter the reult as 1, the valuation has to be set automatically as accepted but its not appearing, could anyone please let me know am i missing any settings.
Suggestions will be worth appretation

Hi sarfrazbaig ,
If you are using sampling procedure, check the "Valuation Mode". It must be "Manual Valuation" to achieve the valuation Manually.
The trx code will be QDV1/2/3 for Sampling procedure.
Regards,
Shyamal
=================================================================================
Okey if you are not using the sampling procedure then,
Set the value as "Automatic Close" / Close, Navigate and save automatically" in the IMG settings at Quality Management->Basic Settings->Maintain Settings at Plant Level, here for the relevant plant select the "Result Recording" Tab and set the mentioned vales for the field "Recording configuration"
Revert for for further inputs.
Regards,
Shyamal
Edited by: Shyamal Joshi on Aug 12, 2009 12:24 PM

Pricing ZCondition Types are not appearing in Condition Record Maintanence

Hi All,
We have a requirement in SAP CRM Opportunity Management where the pricing determination should happen. So, to facilitate the requirement we have done the following
Downloaded the DNL_CUST_CNDALL and DNL_CUST_CND from ECC to CRM
But the Problem is when I am trying to maintain the Condition record in T-Code "/SAPCND/GCM" 　our Z-Condition types are not appearing in the list, also in Product Master Condition Tab.
Please suggest me how to resolve this issue.
Regards,
karthik J

Hi Karthik,
As a best practice -
1. If you are downloading the condition type and pricing procedure from ECC, then it is advisable to use ECC as a master system for all your Z condition type/condition record maintenance.
2. Similarly if you are using Pricing procedure as of ECC, then ensure that the downloaded pricing procedure in CRM is used for pricing procedure determination.
3. The condition record in T-Code "/SAPCND/GCM" is advisable to use if you are mainly using CRM Pricing.
By looking at your problem statement you are using ECC pricing procedure, condition types by downloading it to CRM.
If you have any other comments to make, please give the exact problem statement or any appropriate problem screenshot for further analysis.
Hope this will be useful
Thanks and Regards
DJ

Sp L records are coming to the PSA and not updating in the data target

Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?

Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps...

SOMETHING IS WRONG, I SEND A FILE TO TRASH AND DOES NOT APPEAR IN TRASH, THE TRASH IS EMPTY

SOMETHING IS WRONG, I SEND A FILE TO TRASH AND DOES NOT APPEAR IN TRASH, THE TRASH IS EMPTY

I had the same problem. It was solved see the discussion at https://discussions.apple.com/message/19433909#19433909

HT204306 my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

You've connected the iPad via cable to your computer, and your computer's iTunes is up-to-date ? If it's icon isn't showing then try one of these troubleshooting pages :
PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Mac : If you don't see your connected device in iTunes for Mac - Apple Support
If the iPad is disabled then you'll need to reset the iPad back to factory defaults, after which you can restore to your backup

Record set file names not appearing ?

Could anyone tell me why the file names for the record sets that I'm creating don't show up. The "lightning bolts" representing the data show up under the rs name and it appears within the code, but the file names are not next to the bolts as expected ?
Thank you,
Fred...

Hello PZ,
Thanks for jumping in and trying to help. Sorry for my ignorance when
it comes to this as I am just diving into the world of data bases
using php and mysql. I believe I was referring to the created "table
set name" and the "fields" within them (see bottom) . In the bindings
panel the lightning bolts appear under the created table set, but the
name of the table set is not appearing and these highlighted file
names "fields" that should be next the lightning bolts to identify
them are not appearing. These names , and so on
appear in the code but not in the bindings panel next to the lightning
bolts to help me identify which one I am choosing .
The php page is working the way I want but I have to go through the
process of elimination to figure out which "field" e.g
I'm choosing when placing them in a table in my dreamweaver page. I
hope I am explaining myself properly and thank you very much again for
your efforts.
Fred...
Here is the code I'm talking about and a picture of the database I'm
getting them from.
Year built
Floors
Address
Elevator
Doorman
Gym
Contact
Pets
Parking
Fireplace
Phone:
Email:
Description:
buildingID     propName     address     neighborhood     phone     email     floors     do orman
elevator     pets     yearBuilt     propPic     inParking     outParking     fireplace
description     gym
               14     BC670     280 East 2nd Street     Downtown     2125559876     [email protected]
     6     0     0     0     1977     BC670.jpg     0     0     0     Located between Avenues C and D at
Houston Street ...     0

Wrong records do not appear in PSA

Similar Messages

Maybe you are looking for