Xilinx error 59 reported by Translation process, and unhandled exception in ngdbuild
Hi all,
Not sure if this is the right forum to post in but I'll try.
I'm struggeling with compiling my FPGA code on a NI 9074 target with 8 modules. LabView FPGA tells me that it failed due to a xilinx error in the translation process. It looks like the ngdbuild.exe craches (I'm getting questions from CVI to start debugging an unhandled exception. This happens two times every I try to compile the FPGA code. But the exception seems to happen at different places every time. That is at least what I see from the debug window which appears, assuming the number in square bracets means line number in the source. This number seems to shift with every compilation. It shifts from 1864 to 5896.
The error which is returned to the LabView FPGA is:
ERROR:ConstraintSystem:59 - Constraint <TIMESPEC "TS_AsynchMite29"= FROM
PADS(mIoHWord_n) TO PADS(aIoInt*) 0 ns;> [toplevel_gen.ucf(606)]: PADS
"mIoHWord_n" not found. Please verify that:
1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.
ERROR:ConstraintSystem:59 - Constraint <TIMESPEC "TS_AsynchMite30"= FROM
PADS(mIoHWord_n) TO PADS(mIoDmaReq<*>) 0 ns;> [toplevel_gen.ucf(607)]: PADS
"mIoHWord_n" not found. Please verify that:
1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.
ERROR:ConstraintSystem:59 - Constraint <TIMESPEC "TS_AsynchMite31"= FROM
PADS(mIoHWord_n) TO PADS(mIoDtack_n) 0 ns;> [toplevel_gen.ucf(608)]: PADS
"mIoHWord_n" not found. Please verify that:
1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.
ERROR:ConstraintSystem:59 - Constraint <TIMESPEC "TS_AsynchMite32"= FROM
PADS(mIoHWord_n) TO PADS(mIoReady) 0 ns;> [toplevel_gen.ucf(609)]: PADS
"mIoHWord_n" not found. Please verify that:
1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.
ERROR:ConstraintSystem:59 - Constraint <TIMESPEC "TS_AsynchMite33"= FROM
PADS(mIoHWord_n) TO PADS(mIoData<*>) 0 ns;> [toplevel_gen.ucf(610)]: PADS
"mIoHWord_n" not found. Please verify that:
1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.
Done...
I'm not familiar with VHDL so I don't know the specifics of what really happens during the compilation. I dont have anything specail timing code in the VI except for loop timers.
I'm using LabView FPGA 2011, and xilinx 12.4. The code has compiled successfully on earlier LabView versions. There are no errors or warings in my LabView FPGA code that that LabView detects. Is this a bug in LabView FPGA 2011 or Xilinx 12.4?
I've attached the log files from the compilation process and the error summary that LabView FPGA gives me.
Thanks in advance.
Regards,
Anders Garmo
System Architercure Developer
Attachments:
FPGA error1.txt 26 KB
FPGA Xilinx Log.txt 1316 KB
fpga error 1.png 16 KB
Peter,
You are running into bug 1747626. I will send you an email with a fix.
Regards, Marc We have the same problem here. We have installed the bugfix but it still does not work.
Similar Messages
-
How to catch the error occurred in Integration Process, and then save it?
1. how to catch the error occurred in Integration Process, and then save the detailed error message to the file?
2. there are fault message type for inbound message interface, how to use the fault message type in IR?
Thanks,
Michael
Message was edited by: Spring Tang
inital
Message was edited by: Spring Tang
detailed message output
Message was edited by: Spring Tang
fault message typeHi Spring,
If u give an exception step along with your Transformation Step, whenever some error occurs in your message mapping, this exception block wil be triggered.
You can configure your exception block to do all exception processing that you want. This exception handling is like any other java Exceptio n Handler. You can do anything that you want in your exception handler block on the basis of your requirements.
<i>If an exception is triggered at runtime, the system first searches for the relevant exception handler in surrounding blocks. If it does not find the correct exception handler, it continues the search in the next block in the block hierarchy.
When the system finds the correct system handler, it stops all active steps in the block in which the exception handler is defined and then continues processing in the exception handler branch. Once the exception handler has finished processing, the process is continued after the block.
If the system fails to find an exception handler, it terminates the integration process with an error.</i>
Regards,
Bhavesh -
I jsut downloaded the newst iTunes.
When ever I ppress the icon or go through the list of programs to open It, I click on it then the "Error report" comes up. Everytime I try to open it the "error report" comes up and the choices are "Send error report" or "Don't send" and iTunes will not end up opening up. PLEASE HELP !See this previous discussion
https://discussions.apple.com/message/3066086#3066086 -
Error in MSS HCM Processes and Forms Overview
Hi all,
Currently we are working on ESS/MSS from NW 7.3 portal.
When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
And on some user HCM Processes and Forms Overview not shown properly.
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest me the solution.
Regards,
DevendraDear Andrea,
I reset the password of backend user and gave sap_all and sap_new role.
Last time it prompt the screen in mss as to change the password. (See above screen shot).
But after reset the password...error showing instead of login screen in mss as below:
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
I checked log in ST22 as below
What happened?
The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_ABAP_TSTMP=================CP' has to be
terminated.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
caught in
procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
Regards,
Devendra -
A question about ROLLBACK and Unhandled Exceptions in stored subprograms
Hi,
Oracle version : Enterprise Edition Release 11.2.0.1.0 - 64bit
OS : Linux Fedora Core 17 (X86_64)
At chapter 11 of the online PL/SQL Reference, here is what oracle says about Unhandled Exceptions :
If a stored subprogram exits with an unhandled exception, PL/SQL does not roll back database changes made by the subprogram.
I tried the following code:
code
HOST clear;
SET SQLBLANKLINES ON;
ALTER SESSION SET PLSQL_WARNINGS='ENABLE:ALL';
DROP TABLE tmptab;
CREATE TABLE tmptab(n NUMBER);
CREATE OR REPLACE PACKAGE pkg1_pkg
AUTHID DEFINER
AS
MYEXCEPTION EXCEPTION;
PRAGMA EXCEPTION_INIT(MYEXCEPTION, -20001);
END;
SHOW ERRORS;
-- This is a subprogram which exists
-- with an unhandled exception
CREATE OR REPLACE PROCEDURE mytestProc
AUTHID DEFINER
IS
BEGIN
INSERT INTO tmptab(n) VALUES(100);
-- So this unhandled exception does a ROLLBACK
-- which cancels the previous INSERT statement
RAISE pkg1_pkg.MYEXCEPTION;
END mytestProc;
SHOW ERRORS;
BEGIN
mytestProc();
END;
SELECT * FROM tmptab;
And here is the output
BEGIN
ERROR at line 1:
ORA-20001:
ORA-06512: at "TRAINING.MYTESTPROC", line 6
ORA-06512: at line 2
no rows selected
The fact that SELECT * FROM tmptab gives: no rows selected indicates that the unhandled exception in the stored subprogram myTestProc did in fact a ROLLBACK for the INSERT statement into the tmptab table.
So I don't understand why in the documentation it has been mentioned that no ROLLBACK is not done.
Could anyone kindly make some clarification on this?
Thanks in advance,
Regards,
DariyooshHi,
If a stored subprogram exits with an unhandled exception, PL/SQL does not roll back database changes made by the subprogram.
What's going on here is that an anonymous block (which is not stored) exits with an unhandled exception, and that does roll back uncommitted transactions.
I created a procedure to see how many rows are in tmptab:
CREATE OR REPLACE PROCEDURE tmptab_cnt (in_txt IN VARCHAR2)
AUTHID DEFINER
AS
n PLS_INTEGER;
BEGIN
SELECT COUNT (*)
INTO n
FROM tmptab;
dbms_output.put_line ( n
|| ' rows in tmptab in '
|| in_txt
END tmptab_cnt;
and called it from your procedure, and also from your anonymous block:
CREATE OR REPLACE PROCEDURE mytestProc
AUTHID DEFINER
IS
BEGIN
INSERT INTO tmptab(n) VALUES(100);
tmptab_cnt ('mytestProc');
RAISE pkg1_pkg.MYEXCEPTION;
END mytestProc;
SHOW ERRORS;
BEGIN
mytestProc();
EXCEPTION
WHEN OTHERS THEN
tmptab_cnt ('anonymous block');
RAISE;
END;
The output from this is:
Procedure created.
No errors.
1 rows in tmptab in mytestProc
1 rows in tmptab in anonymous block
BEGIN
ERROR at line 1:
ORA-20001:
ORA-06512: at line 6
no rows selected
As you can see, there was 1 row in the table after the procedure returned to the anonymous block.
Thanks for posting such a clear and complete test script; that really helps.
How did you format the code, with the green background and the title? -
Hi All,We are receiving below errors in our production envrionment as The Web Service plug-in failed in OrganizationId: c28f361a-8111-e211-b7f2-68b599c03df8; SdkMessageProcessingStepId: 36ccbb1b-ea3e-db11-86a7-000a3a5473e8;
1.EntityName: userquery; Stage: 30; MessageName: RetrieveMultiple;
Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation
Inner Exception: System.IndexOutOfRangeException: #TotalRecordCount
<Data>Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.IndexOutOfRangeException: #TotalRecordCount
2.EntityName: email; Stage: 30; MessageName: RetrieveMultiple
Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation
Inner Exception: System.NullReferenceException: Object reference not set to an instance of an object
<Data>Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation
Inner Exception: System.NullReferenceException: Object reference not set to an instance of an object.
3.
EntityName: plugintype; Stage: 30; MessageName: RetrieveMultiple;
<Data>Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.InvalidOperationException: There is already an open DataReader associated with this Command which must be closed first.
Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.InvalidOperationException: There is already an open DataReader associated with this Command which must be closed firstPlease give us idea on above issues.
Natarajan.VHi,
What version of CRM you are using? Does this happen when you open the case record?
We have faced the similar for Account record and was solved using below query. I am not sure about incident.
Update ACC
SET ACC.Merged = 0
from AccountBase ACC
WHERE ACC.merged is null
Do you have case merge option enabled on incident entity? As per the MS it is enabled for CRM 2013 SP1 and CRM 2015.
http://www.microsoft.com/en-us/dynamics/crm-customer-center/merge-similar-cases.aspx
Thanks!
Kalim Khan -
Error in MSS hr process and forms services
Hi ,
when i execute the services releated to hcm prcessand forms (asr)
im getting the below.Does any one find the solution or this please revert me back
Error when processing your request
What has happened?
The URL http://hr.d.evo.vodafone.com:/sap/bc/webdynpro/sap/asr_processes_display/ was not called due to an error.
The following error text was processed in the system DE2 : The ASSERT condition was violated.
The error occurred on the application server avggstah_DE2_02 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_MODIFIED_TIMESTAMP of program CL_WDR_LS_JS_TIMESTAMP========CP
Method: __GET_PAGE of program CL_WDR_CLIENT_SSR_LS==========CP
Method: __GET_MAIN_PAGE of program CL_WDR_CLIENT_SSR_LS==========CP
Method: __COMMAND_RULER of program CL_WDR_CLIENT_SSR_LS==========CP
Method: CONVERT_COMMAND_LIST_TO_HTML of program CL_WDR_CLIENT_SSR_LS==========CP
Method: IF_WDR_CLIENT~SEND_RESPONSE of program CL_WDR_CLIENT_SSR_LS==========CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DE2 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server avggstah_DE2_02 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server avggstah_DE2_02 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: PT3HR003 -l: E -s: DE2 -i: avggstah_DE2_02 -w: 1 -d: 20090710 -t: 125959 -v: RABAX_STATE -e: ASSERTION_FAILED
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Thanks,
NachyHi,
Note 1266588 - Automatic height adjustment does not work
Symptom
Your application has problems with the height adjustment in the browser. The following symptoms may occur:
Your Web Dynpro ABAP application does not use the maximum height of the browser or iView.
You run your application in an iView of the Enterprise Portal. After several interactions, the system no longer adjusts the height of the iView correctly.
An SAP Interactive Form by Adobe with a height of 100% turns into a line or does not use 100% of the height in the browser.
In a TransparentContainer, Tray, and so on, you have set the height to 100%. However, in Firefox, this user interface (UI) element does not have the full height. This is unexpected.
Your application runs in an iView of the Enterprise Portal with automatic height adjustment and seems to be too large. The application becomes visible only after scrolling, or it has an unnecessary scroll bar.
After the appplication has started, the browser displays an empty light-blue space or a thin line. -
Send error report for quick time and i tunes
I need some help tried everything that apple has to offer to try to fix this on my own but noting is working i get for quick time error bex and a bunch of other numbers like 7.65.17.80 and 4afa5825 and 000130d and c0000409, and for i tunes applever: 9.0.3.15 modver: 5.1.2600.5755 and offset: 0001b21a, i followed a post that b noir was helping some one out that had the same problem but it never finished it went as far as dl a free malware program i did that and scanned let me know what i have to do next please
after spending over a hour on the phone to apple im no furhter forward did an itunes update weeks ago and since then i get the message quick time is not installed error 2093 ive tried everything uninstalled reinstalled deleted everything to do wiht apple and even apple support cant help me ive checked the sample movie in quicktime it plays can anyone help so i can have my itunes back please
lesley -
Slow processing and getting opening errors/warnings
I've modified the PDF Binder sample to get a plugin that would open PDF's and Tif files, and save them as PDF/A-1b (code below).
It's working. The problem: it's processing too slow (compared with the Actions batch processing)... and I've been getting warnings/and errors about "The imput file is corrupt or of an unknown/unsupported type" type. This is stopping my batch process until I click OK, and the it continues.
I am trying to process a few thousand of tif files now. I tried first to use the Batch processing capability built in the Acrobat X... an it works, but only with the first 255 documents in the folder... then gives an "insufficient disk space" message for the rest of the files in the directory.
So, 2 questions: Does anyone knows why it is so slow processing the tiff files and... how I can make my code "silent" so it does not wait for the OK after the message??
Thanks in advance.
The code:
ADOBE SYSTEMS INCORPORATED
Copyright (C) 1998-2006 Adobe Systems Incorporated
All rights reserved.
NOTICE: Adobe permits you to use, modify, and distribute this file
in accordance with the terms of the Adobe license agreement
accompanying it. If you have received this file from a source other
than Adobe, then your use, modification, or distribution of it
requires the prior written permission of Adobe.
\file PDFBinder.cpp
- Implements a method to convert multiple files into PDFs and bind the PDFs
into one PDF file. The code shows how to use AVConversionToPDFHandler to
convert files to PDF and how to use PDDocInsertPages() to combind PDF files.
// Headers.
#include <stdio.h>
#include <ctype.h>
#ifndef MAC_PLATFORM
#include <direct.h>
#include "PIHeaders.h"
#endif
// Defines ----------
// Define this flag to show AVConversionToPDFEnumHandler info. in log file.
#define SHOW_TOPDF_HANDLER_TYPES
// define this flag to use file type filter
#define USE_FILE_FILTER
Constants/Declarations
// Message display control. Ture: display
ASBool bEcho = true;
// File location. User can change the following filenames.
#if WIN_PLATFORM
const char* STRING_PDFBinderFolder = "C:\\Fairfax\\Adobe\\in";
const char* STRING_PDFOutputFolder = "C:\\Fairfax\\Adobe\\PDFA";
const char* FOLDERSYMBOL="\\";
#endif
#if MAC_PLATFORM
const char* STRING_PDFBinderFolder = "/PDFBinder";
const char* FOLDERSYMBOL="/";
#endif
char* OutputPdfFileName = "PDFBinderOutput.pdf";
char* LogFileName = "PDFProcessLog.txt";
static ASInt32 gNumToPDFExt;
static ASInt32 gNumFromPDFExt;
static AVConversionFromPDFHandler RightHandler;
const int MAX_FILENAME_LENGTH = 256;
char sLogFileName[MAX_FILENAME_LENGTH];
// Filter -----------
// Filter is a list of file types which can be converted to PDF in this program.
// Use a filter may fit user's specific needs and ensure a smooth automation process.
// Of course, the user can turn off the filter in two ways:
// (1) gPDFBinderFileFilter = "";
// (2) comment out //USE_FILE_FILTER
// The filter should be consistent with the Acrobat viewer's menu capability:
// Create PDF from multiple files ...
// Here we put the types which have been tested, but user can expand it.
const char* gPDFBinderFileFilter = "pdf,tif,tiff,PDF,TIF,TIFF";
const int MAX_STRING_LENGTH = 2048;
AVConversionToPDFHandler gHandler;
// functions in this file.
int ConvertAndInsertFileToPDF(ASPathName aspItem, char* aFileName, PDDoc PDFfile);
void BindingFileToPDF(ASPathName aPathName, char* aFilename, ASFileSysItemPropsRec nFileAttrb, PDDoc targetPDdDoc, ASPathName outputPathName, int *ipTotal, int *ipConverted);
ASBool PassPDFBinderFileFilter(char* filename);
int ConvertAndSavePDFInTargetFolder(ASPathName aPathName, char* aFileName, PDDoc PDFfile, ASPathName outputPathName);
char* NewFileName(char *& aFileName);
// callbacks
ACCB1 ASBool ACCB2 MyAVConversionToPDFEnumProc(AVConversionToPDFHandler handler, AVConversionEnumProcData data);
ACCB1 ASBool ACCB2 AVConversionToPDFEnumFindHandler(AVConversionToPDFHandler handler, AVConversionEnumProcData data);
static ACCB1 ASBool ACCB2 myAVConversionFromPDFEnumProc(AVConversionFromPDFHandler handler, AVConversionEnumProcData data);
Implementation
/** This sample implements a method to convert multiple files into PDF
and bind the PDFs into one PDF file .
This sample shows developers how to grammatically implement To-PDF file
converson functionality. Basically, the code uses AVConversionToPDFHandler
to convert files to PDF and PDDocInsertPages()to combine PDF files.
This plug-in is designed to run from a menu item, and by setting bEcho = false
it may be run without any graphics user interface on the screen. Therefore, it
can be executed from other programs such as C IAC, VB IAC, and JavaScript
to meet enterprise workflow needs.
How to run it :
- This sample adds a menu item "PDF Binder" under the Acrobat SDK submenu. Two ways to
execute it: 1) click the menu item to run the program using a fixed file location
hard coded; 2) press the shift key and click the menu item to choose a folder where
files to be converted are located.
- Without folder selection, this original code is to convert and bind files in a
directory C\test\PDFBinder for Win, or a folder MacHD:test:PDFBinder for Mac.
You can copy the test files in the project's testfiles folder to the appropriate location
for testing. You may locate files to be converted in another directory/folder, and
specify the location in the string variable PDFBinderFolder in the code.
- When you have the files to be converted ready in the specified location,
run Acrobat 6 menu Advanced->AcrobatSDK->PDF Binder to start the operation. There are
echo messages informing you of the operation start and end, but you can change and
rebuild the code to turn off the display on screen.
- An output file PDFBinderOutput.pdf in the same location is created
when the program succeeds. A text log file PDFBinderLog.txt in the same
location records the process and results.
- You can set bEch = false in the code to turn off any display on the screen.
This is necessary when you call the menu function from within other programs
of C IAC, VB IAC, JavaScript.
- An optional file filter is used to pre-process the files. The filter only allows
the files with predefined types to be processed. You can change the file type list
as you wish. Using a filter may ensure a smooth automation process, since you can put
only well-tested file types in the filter. To turn off the filter, you can set
gPDFBinderFileFilter = "" or not to define USE_FILE_FILTER
- Note this is a sample only, developers need to make further improvement for
their actual use. For example, you can set up a list of files to use the method for
the conversion and binding. And you can add code to handle special file types.
@see AVConversionConvertToPDFWithHandler
@see AVConversionEnumToPDFConverters
@see ASFileSysDestroyFolderIterator
@see PDDocOpen
@see PDDocClose
@see PDDocInsertPages
@see PDDocCreatePage
@see PDDocDeletePages
@see PDPageRelease
@see ASFileSysCreatePathName
@see ASFileSysFirstFolderItem
@see ASFileSysNextFolderItem
@see ASFileSysGetNameFromPath
@see ASFileSysReleasePath
ACCB1 void ACCB2 PDFBinderCommand(void*)
// if the menu item clicked with Shift key pressed down, go to interactive mode.
// let the user to choose a folder and process all the file in the folder.
ASText dispText = ASTextNew();
char PDFBinderFolder[MAX_STRING_LENGTH];
ASBool shiftKeyIsDown = ((AVSysGetModifiers() & AV_SHIFT) != 0);
if(shiftKeyIsDown) {
AVOpenSaveDialogParamsRec dialogParams;
// Configure the dialog box parameters.
memset (&dialogParams, 0, sizeof (AVOpenSaveDialogParamsRec));
dialogParams.size = sizeof(AVOpenSaveDialogParamsRec);
dialogParams.windowTitle = ASTextFromScriptText("Choose folder with files to bind",kASRomanScript);
dialogParams.flags |= kAVOpenSaveAllowForeignFileSystems;
dialogParams.initialFileSys = ASGetDefaultUnicodeFileSys();
ASPathName thePath;
ASFileSys fileSys;
AVAppBeginModal(NULL);
if(ASBoolToBool(AVAppChooseFolderDialog(&dialogParams, &fileSys, &thePath)) != true){
AVAppEndModal();
//AVAlertNote("Failed to select the folder");
return;
AVAppEndModal();
#ifdef WIN_PLATFORM
ASFileSysDisplayASTextFromPath(ASGetDefaultUnicodeFileSys(), thePath, dispText);
ASHostEncoding bestEnc = ASTextGetBestEncoding(dispText, (ASHostEncoding)PDGetHostEncoding());
strncpy(PDFBinderFolder, ASTextGetEncoded(dispText, bestEnc), MAX_STRING_LENGTH - 1);
#else
ASPlatformPath aspPath;
ASFileSysAcquirePlatformPath(fileSys, thePath, ASAtomFromString("POSIXPath"), &aspPath);
strncpy(PDFBinderFolder, (char *)ASPlatformPathGetPOSIXPathPtr(aspPath), MAX_STRING_LENGTH - 1);
ASFileSysReleasePlatformPath(fileSys, aspPath);
// remove extra path separator
char e = PDFBinderFolder[strlen(PDFBinderFolder)-1];
if(e == ':' || e == '/')
PDFBinderFolder[strlen(PDFBinderFolder)-1]='\0';
dispText = ASTextFromScriptText(PDFBinderFolder, kASEUnicodeScript);
#endif
ASFileSysReleasePath(fileSys, thePath);
// Otherwise, the hard coded file path will be used.
else {
strcpy(PDFBinderFolder, STRING_PDFBinderFolder);
dispText = ASTextFromScriptText(PDFBinderFolder, kASRomanScript);
// instruction message
char strMsg[MAX_STRING_LENGTH] = "";
sprintf(strMsg, "This function will convert and process Tiff and PDF files in the selected directory. ");
strcat(strMsg, " You need to copy your files in C:\\Fairfax\\Adobe\\in directory." );
strcat(strMsg, " Files will be processed into C:\\Fairfax\\Adobe\\PDFA directory." );
strcat(strMsg, " If you are ready, click OK to continue, or click Cancel to quit. " );
strcat(strMsg, " \nNote you can press down Shift key and click the menu item to have a folder selection. " );
strcat(strMsg, " \nNote you can turn off the echo message by setting bEcho = false and rebuild the code. " );
if(ASBoolToBool(bEcho)==true){
ASInt32 choice = AVAlert(ALERT_CAUTION, strMsg, "OK", "Cancel", NULL, true);
if(choice==2) {
return;
// create a new target pdf file with one empty page
PDDoc TargetPDF = PDDocCreate();
ASFixedRect mediaBox = { fixedZero, ASInt32ToFixed(792), ASInt32ToFixed(612), fixedZero };
PDPage emptyPage = PDDocCreatePage (TargetPDF, PDBeforeFirstPage, mediaBox);
PDPageRelease (emptyPage);
// get available headlers and set our file filter
char ValidExt[MAX_STRING_LENGTH];
memset(ValidExt, 0, MAX_STRING_LENGTH);
#ifdef SHOW_TOPDF_HANDLER_TYPES
// enumerate AVConversioToPDF handlers to get all available file
// types which can be converted to PDF.
AVConversionEnumToPDFConverters(MyAVConversionToPDFEnumProc, (AVConversionEnumProcData) ValidExt);
//AVAlertNote("Converters Defined");
//AVAlertNote(ValidExt);
//AVAlertNote(gPDFBinderFileFilter);
#endif
#ifdef USE_FILE_FILTER
// set File filter
strcpy(ValidExt, gPDFBinderFileFilter);
//AVAlertNote(ValidExt);
#endif
// process all files in the directory
int iNumFiles = 0;
int iNumFilesConverted = 0;
char* Done = "Converted";
char* NotDone = " - ";
char fileName[MAX_FILENAME_LENGTH+1];
ASFileSysItemPropsRec props;
ASFolderIterator iter;
ASPathName aspItem = NULL;
memset(&props, 0, sizeof(props));
props.size = sizeof(props);
//AVAlertNote("Props Defined");
ASPathName theFolder = NULL;
ASFileSys fileSys = NULL;
DURING
#ifdef WIN_PLATFORM
fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("ASTextPath"), dispText);
theFolder = ASFileSysCreatePathName (fileSys, ASAtomFromString("ASTextPath"), dispText, 0);
//AVAlertNote("FileSys and Folder Defined");
#else
fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("POSIXPath"), PDFBinderFolder);
theFolder = ASFileSysCreatePathName (fileSys,
ASAtomFromString("POSIXPath"), PDFBinderFolder, 0);
#endif
if (theFolder==NULL) {
//AVAlertNote("Fail to create ASPathName for the selected folder.");
E_RTRN_VOID
// Find first file in current directory
if((iter = ASFileSysFirstFolderItem(fileSys, theFolder, &props, &aspItem))==FALSE) {
//AVAlertNote("This is either an invalid folder or the folder contains no files.");
E_RTRN_VOID
ASFileSysReleasePath(fileSys, theFolder);
//AVAlertNote("Folder Released");
// get filename only
if(ASFileSysGetNameFromPath(fileSys, aspItem, fileName, sizeof(fileName))) {
E_RTRN_VOID
HANDLER
// exception handling
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
if(aspItem!=NULL) ASFileSysReleasePath(fileSys, aspItem);
if(theFolder!=NULL) ASFileSysReleasePath(fileSys, theFolder);
// display an error message.
if(ASBoolToBool(bEcho)==true) {
AVAlertNote (errorMsg);
return;
END_HANDLER
//AVAlertNote(fileName);
// go to binding if it's a valid type of file
if(props.type == kASFileSysFile && PassPDFBinderFileFilter(fileName)) {
char outFileName[] = "";
//strcat(outFileName, STRING_PDFOutputFolder);
//strcat(outFileName, FOLDERSYMBOL);
//strcat(outFileName, fileName);
strcat(outFileName, STRING_PDFOutputFolder);
strcat(outFileName, FOLDERSYMBOL);
strcat(outFileName, fileName);
//AVAlertNote(outFileName);
ASPathName outputFileName = ASFileSysCreatePathName (ASGetDefaultFileSys(), ASAtomFromString("Cstring"), outFileName, 0);
BindingFileToPDF(aspItem, fileName, props, TargetPDF, outputFileName ,&iNumFiles, &iNumFilesConverted);
//AVAlertNote("File Processed");
ASFileSysReleasePath(fileSys, aspItem);
// process all other files
while(ASFileSysNextFolderItem(fileSys, iter, &props, &aspItem)) {
// get filename only
if(ASFileSysGetNameFromPath(fileSys, aspItem, fileName, sizeof(fileName))) {
return;
// go to binding if it's a valid type of file
if(props.type == kASFileSysFile && PassPDFBinderFileFilter(fileName)) {
char outFileName[] = "";
//strcat(outFileName, STRING_PDFOutputFolder);
//strcat(outFileName, FOLDERSYMBOL);
//strcat(outFileName, fileName);
strcat(outFileName, STRING_PDFOutputFolder);
strcat(outFileName, FOLDERSYMBOL);
strcat(outFileName, fileName);
//AVAlertNote(outFileName);
ASPathName outputFileName = ASFileSysCreatePathName (ASGetDefaultFileSys(), ASAtomFromString("Cstring"), outFileName, 0);
BindingFileToPDF(aspItem, fileName, props, TargetPDF, outputFileName, &iNumFiles, &iNumFilesConverted);
//AVAlertNote("File Processed");
ASFileSysReleasePath(fileSys, aspItem);
ASPathName pdfPathName = NULL;
DURING
// close the findfile
ASFileSysDestroyFolderIterator(fileSys, iter);
// save and close the output pdf file
// create path
ASText pathText = ASTextNew();
ASTextCatMany(
pathText,
dispText,
ASTextFromScriptText(FOLDERSYMBOL, kASRomanScript),
ASTextFromScriptText(OutputPdfFileName, kASRomanScript),
NULL);
#ifdef WIN_PLATFORM
ASFileSys fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("ASTextPath"), pathText);
pdfPathName = ASFileSysCreatePathName (fileSys,
ASAtomFromString("ASTextPath"), pathText, 0);
#else
char path[MAX_STRING_LENGTH];
strncpy(path, ASTextGetEncoded(pathText,
ASTextGetBestEncoding(pathText, (ASHostEncoding)PDGetHostEncoding())), MAX_STRING_LENGTH - 1);
ASFileSys fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("POSIXPath"), path);
pdfPathName = ASFileSysCreatePathName (fileSys,
ASAtomFromString("POSIXPath"), path, 0);
#endif
if(pdfPathName==NULL) {
E_RTRN_VOID
// delete the empty page
if(PDDocGetNumPages(TargetPDF)>1) {
PDDocDeletePages (TargetPDF, 0,0,NULL, NULL);
// save
//PDDocSave (TargetPDF, PDSaveFull | PDSaveCollectGarbage | PDSaveLinearized,
// pdfPathName, ASGetDefaultUnicodeFileSys(), NULL, NULL);
PDDocClose (TargetPDF);
//ASFileSysReleasePath(fileSys, pdfPathName);
HANDLER
// exception handling
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
if(pdfPathName!=NULL) ASFileSysReleasePath(fileSys, pdfPathName);
// display an error message.
if(ASBoolToBool(bEcho)==true) {
AVAlertNote (errorMsg);
return;
END_HANDLER
// use this line to show the massage on screen if you need
//if(ASBoolToBool(bEcho)==true) {
AVAlertNote ("Folder Completed. PDF/A Output files generated.");
return;
/* ConvertAndInsertFileToPDF
/** Internal function \n
** Convert a file to PDF, then insert it to target PDF file.
** @param aFileName IN char string, filename.
** @param PDFfile IN/OUT PDDoc of the target PDF file.
** @return 0 if OK, 1 if failed.
int ConvertAndInsertFileToPDF(ASPathName aPathName, char* aFileName, PDDoc PDFfile)
PDDoc tempPDF;
char* Ext;
DURING
// get file extention
Ext = strrchr(aFileName,'.');
if(Ext) {
Ext++;
else {
E_RETURN (1);
// if the file is PDF, open PDDoc
if(strcmp(Ext,"PDF")==0 || strcmp(Ext,"pdf")==0) {
tempPDF = PDDocOpen (aPathName, ASGetDefaultFileSys(), NULL, true);
if(tempPDF==NULL) {
PDDocClose(tempPDF);
E_RETURN (1);
// else convert it to PDF
else
// let it automatically find right handler for the file and do the job.
AVConversionStatus stat = AVConversionConvertToPDF
(kAVConversionAsyncOkay, //kAVConversionNoFlags
aPathName, ASGetDefaultFileSys(), &tempPDF, NULL);
// check if successful
if(stat != kAVConversionSuccess) {
//AVAlertNote("Cannot convert the file.");
E_RETURN (1);
HANDLER
// exception handling
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
// display an error message.
if(ASBoolToBool(bEcho) == true) {
AVAlertNote (errorMsg);
return 1;
END_HANDLER
// insert new PDF into target PDF
DURING
// insert all pages of new pdfc to TargetPDFfile.
PDDocInsertPages(PDFfile, PDLastPage, tempPDF, 0,
PDAllPages, PDInsertAll, NULL, NULL, NULL, NULL);
PDDocClose(tempPDF);
HANDLER
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
if(ASBoolToBool(bEcho)==true) {
AVAlertNote(errorMsg);
END_HANDLER
if(strcmp(Ext,"doc")==0) {
char fname[40];
sprintf(fname,"%s.pdf",aFileName);
remove(fname);
return 0;
/* MyAVConversionToPDFEnumProc
/** Internal callback function \n
** called for every AVConversionToPDFHandler.
** get the valid type (file extention) for the conversion.
** @return true.
ACCB1 ASBool ACCB2 MyAVConversionToPDFEnumProc(AVConversionToPDFHandler handler,
AVConversionEnumProcData data)
ASUns16 numFileExt = handler->convFilter.numFileDescs;
for (int i = 0; i < numFileExt; i++) {
char* ext = handler->convFilter.fileDescs[i].extension;
if(strlen(ext)>0) {
strcat((char*) data, ext);
strcat((char*) data, ",");
return true;
/* this is alternative code to get right conversion handler for a specific file
to be converted. It works with function AVConversionConvertToPDFWithHandler.
It's not used now, but kept for user's reference.
ACCB1 ASBool ACCB2 AVConversionToPDFEnumFindHandler(AVConversionToPDFHandler handler,
AVConversionEnumProcData data)
ASUns16 numFileExt = handler->convFilter.numFileDescs;
for ( int i = 0; i < numFileExt; i++)
char* ext = handler->convFilter.fileDescs[i].extension;
if(strlen(ext)) {
if(!strcmp((char*) data, ext)) {
gHandler = handler;
return false;
return true;
/* BindingFileToPDF
/** Internal callback function for binding process \n
** IN: char* aFilename, ASFileSysItemPropsRec nFileAttrb \n
** PDDoc targetPDdDoc, int *ipTotal, \n
** int *ipConverted, FILE *logfile \n
** OUT: int *ipTotal, int *ipConverted. \n
void BindingFileToPDF(ASPathName aPathName, char* aFilename, ASFileSysItemPropsRec nFileAttrb, PDDoc targetPDdDoc, ASPathName outputPathName, int *ipTotal, int *ipConverted)
// ignore system, hidden files, and our target PDF and log file.
if( nFileAttrb.isHidden
|| (strcmp(aFilename,".")==0) || (strcmp(aFilename,".." )==0)
|| (strcmp(aFilename,OutputPdfFileName)==0) || (strcmp(aFilename,LogFileName)==0)) {
return;
(*ipTotal)++;
char msg[MAX_STRING_LENGTH] = "";
char* Done = "Converted";
char* NotDone = " - ";
// try to convert and insert it to target PDF file.
// rc would be 0 for success, otherwise 1.
int rc = ConvertAndSavePDFInTargetFolder(aPathName, aFilename, targetPDdDoc, outputPathName);
// if converted
if(rc==0) {
(*ipConverted)++;
/* PassPDFBinderFileFilter
/** Internal callback function for binding process
** @return true if the IN aFilename is a valid file for PDF conversion,
** otherwise false.
ASBool PassPDFBinderFileFilter(char* aFilename)
#ifdef USE_FILE_FILTER
// if the filter is empty, any file will pass.
if(strlen(gPDFBinderFileFilter)==0)
return true;
char* Ext = strrchr(aFilename,'.');
if(Ext!=NULL) {
Ext++;
if(strstr(gPDFBinderFileFilter, Ext)) {
return true;
return false;
#else
// not use filter, any file will pass.
return true;
#endif
/* ConvertAndInsertFileToPDF
/** Internal function \n
** Convert a file to PDF, then insert it to target PDF file.
** @param aFileName IN char string, filename.
** @param PDFfile IN/OUT PDDoc of the target PDF file.
** @return 0 if OK, 1 if failed.
int ConvertAndSavePDFInTargetFolder(ASPathName aPathName, char* aFileName, PDDoc PDFfile, ASPathName outputPathName)
PDDoc tempPDF;
char* Ext;
DURING
// get file extention
Ext = strrchr(aFileName,'.');
if(Ext) {
Ext++;
else {
E_RETURN (1);
// if the file is PDF, open PDDoc
if(strcmp(Ext,"PDF")==0 || strcmp(Ext,"pdf")==0) {
tempPDF = PDDocOpen (aPathName, ASGetDefaultFileSys(), NULL, true);
if(tempPDF==NULL) {
PDDocClose(tempPDF);
E_RETURN (1);
// else convert it to PDF
else
// let it automatically find right handler for the file and do the job.
AVConversionStatus stat = AVConversionConvertToPDF
(kAVConversionAsyncOkay, //kAVConversionNoFlags
aPathName, ASGetDefaultFileSys(), &tempPDF, NULL);
// check if successful
if(stat != kAVConversionSuccess) {
//AVAlertNote("Cannot convert the file.");
E_RETURN (1);
else {
//change Extension
ASText asTmp = ASTextNew();
ASFileSysDisplayASTextFromPath(ASGetDefaultUnicodeFileSys(), outputPathName, asTmp);
//AVAlertNote(ASTextGetScriptText(asTmp, kASRomanScript));
if(strcmp(Ext,"TIF")==0 || strcmp(Ext,"tif")==0){
ASTextReplace(asTmp, ASTextFromScriptText(".tif", kASRomanScript), ASTextFromScriptText(".pdf", kASRomanScript));
} else {
ASTextReplace(asTmp, ASTextFromScriptText(".tiff", kASRomanScript), ASTextFromScriptText(".pdf", kASRomanScript));
//AVAlertNote(ASTextGetScriptText(asTmp, kASRomanScript));
outputPathName = ASFileSysCreatePathName (ASGetDefaultUnicodeFileSys(), ASAtomFromString("ASTextPath"), asTmp, 0);
HANDLER
// exception handling
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
// display an error message.
if(ASBoolToBool(bEcho) == true) {
AVAlertNote (errorMsg);
return 1;
END_HANDLER
// Run OCR and Save new PDF into target PDF
DURING
// OCR
ASAtom cmdName;
AVCommand cmd;
cmdName=ASAtomFromString("PaperCapture");
cmd=AVCommandNew(cmdName);
ASCab config = ASCabNew();
ASCabPutInt (config, "UIPolicy", kAVCommandUISilent); //hide the interface
if (kAVCommandReady == AVCommandSetConfig (cmd, config)) {
//AVAlertNote("Config Ready");
ASCab inputs = ASCabNew();
ASCabPutPointer (inputs, kAVCommandKeyPDDoc, PDDoc, tempPDF, NULL);
if (kAVCommandReady == AVCommandSetInputs (cmd, inputs)) {
//AVAlertNote("Input Ready");
ASCabDestroy (inputs);
AVCommandStatus status = AVCommandExecute(cmd);
//switch (status) {
// case kAVCommandReady :
// AVAlertNote("Not working, but ready to work.");
// break;
// case kAVCommandWorking :
// AVAlertNote("Still working");
// break;
// case kAVCommandDone :
// AVAlertNote("Done working");
// break;
// case kAVCommandInError :
// AVAlertNote("In Error");
// break;
// case kAVCommandNotExecuted :
// AVAlertNote("Command not executed due to lack of objects on which the command to be executed");
// break;
AVCommandDestroy(cmd);
//Save
//PDDocSave (tempPDF, PDSaveFull | PDSaveCollectGarbage | PDSaveLinearized, outputPathName, ASGetDefaultUnicodeFileSys(), NULL, NULL);
//ClosePDF
//PDDocClose(tempPDF);
//Convert to PDF/A Compliance
//Select the right handler
AVConversionEnumFromPDFConverters(myAVConversionFromPDFEnumProc, NULL);
// do conversion
AVConversionStatus stat = AVConversionConvertFromPDFWithHandler(RightHandler, NULL, kAVConversionAsyncOkay, tempPDF, outputPathName, ASGetDefaultFileSys(), NULL);
// check the returned status and show message
//if (stat == kAVConversionSuccess)
// AVAlertNote( "The PDF/A file was saved in output folder." );
//else if (stat == kAVConversionFailed)
// AVAlertNote( "The PDF/A conversion failed." );
//else if (stat == kAVConversionSuccessAsync)
// AVAlertNote( "The conversion will continue asynchronously." );
//else if (stat == kAVConversionCancelled)
// AVAlertNote( "The conversion was cancelled." );
//Save
//PDDocSave (tempPDF, PDSaveFull | PDSaveCollectGarbage | PDSaveLinearized, outputPathName, ASGetDefaultUnicodeFileSys(), NULL, NULL);
//ClosePDF
PDDocClose(tempPDF);
ASFileSysReleasePath(ASGetDefaultFileSys(), outputPathName);
HANDLER
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
if(ASBoolToBool(bEcho)==true) {
AVAlertNote(errorMsg);
END_HANDLER
if(strcmp(Ext,"doc")==0) {
char fname[40];
sprintf(fname,"%s.pdf",aFileName);
remove(fname);
return 0;
//Select the appropiate handler for the PDF/A conversion
static ACCB1 ASBool ACCB2 myAVConversionFromPDFEnumProc(AVConversionFromPDFHandler handler, AVConversionEnumProcData data)
AVFileFilterRec filter = handler->convFilter;
ASUns16 numFileExt = filter.numFileDescs;
char *kUniqueID = handler->uniqueID;
// go through the conversion handlers to find a handler for PDF extension files and the unique key matches the PDF/A one.
for (ASInt32 i = 0; i < numFileExt; i++)
if (strlen(handler->convFilter.fileDescs[i].extension)>0)
// found it, fill in the handler and return false to stop going on.
if (!strcmp(handler->convFilter.fileDescs[i].extension, "pdf") && !strcmp(kUniqueID,"com.callas.preflight.pdfa")) {
RightHandler = handler;
return false ;
return true;There are some options for various APIs to run "kinda silent" - but again, Acrobat is designed for INTERACTIVE use…so "completely silent" isn't really an option.
As for speed – you'd need to be MUCH MORE specific about where your slow downs are. Have you profiled?
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 12 Dec 2011 07:39:08 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Slow processing and getting opening errors/warnings
Re: Slow processing and getting opening errors/warnings
created by FFX-ER<http://forums.adobe.com/people/FFX-ER> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4079175#4079175 -
There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. Local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles, I get no further and no errors reported. Safari, Opera and Firefox. Deleted cookies and chain but still no action.
If you have not already done so, read the router's user manual troubleshooting section and/or contact its customer service department/forums.
If still having problems, post back w/details of all you have tried to resolve the problems along w/the troubleshooting solutions that the "local techies" had you try.
-
I have installed and uninstalled the downloaded version of itunes several times. Eash time after going through the set up process the error report message pops up and I can not access itunes at all.
Hello, Molly, and welcome to the Discussions.
I'd suggest you try posting in the iTunes for Windows area. You'll be more likely to get a quick and accurate answer there than you will here in the iTunes for Macintosh forum.
When you repost, it will probably be helpful if you include the exact error message to that people know what they're dealing with.
Good luck. -
Unhandled Exception in BO 6.5.2 report(.rep) while save as Excel
Post Author: birinder
CA Forum: Desktop Intelligence Reporting
Hi everyone, I have a report created in BO 6.5.1 and i can save the report as excel file. Now I have installed SP2 and while I try to save the same report in excel, its throwing 'Unhandled Exception c000005 EXCEPTION_ACCESS_VIOLATION'. I'm not able to figure out the problem..... Please help me in this regard......
Thanks,
BirinderPost Author: Wes
CA Forum: Desktop Intelligence Reporting
Hi,There is a fix for excel crashing included in CHF11, or MHF1. You could try applying that and see if it fixes that error.Regards,Wes -
I added a number of folders and files in the excluded files and locations and after that I am unable to access the Antimalware Policies it gives the following error( I am new at sccm):
Unhandled exception occurred in your application. If you click continue the application will ignore this error and attempt to continue. I you click quit the application will close immediately
Object reference not set to an instance of an oblect
With the following details:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryPropertySingleItem.get_BooleanValue()
at Microsoft.ConfigurationManagement.AdminConsole.ClientAgentSettings.Utilities.CreateSCIResultObject(IResultObject antimalwareResultObject)
at Microsoft.ConfigurationManagement.AdminConsole.ClientAgentSettings.Utilities.LoadDefaultSettingObjects(ConnectionManagerBase connectionManager, Dictionary`2& defaultSettingObjects, DialogType dialogType)
at Microsoft.ConfigurationManagement.AdminConsole.ClientAgentSettings.HomePageControl.InitializePageControl()
at Microsoft.ConfigurationManagement.AdminConsole.SccmPageControlDialog.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18051 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
Microsoft.ConfigurationManagement
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.ConfigurationManagement.exe
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18022 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18045 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18046 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
Microsoft.EnterpriseManagement.UI.ConsoleFramework
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.ConsoleFramework.DLL
Microsoft.ConfigurationManagement.ManagementProvider
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.ConfigurationManagement.ManagementProvider.DLL
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.EnterpriseManagement.UI.Foundation
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.Foundation.DLL
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
System.ServiceModel.Web
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18045 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Web/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Web.dll
System.ServiceModel
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18056 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel/v4.0_4.0.0.0__b77a5c561934e089/System.ServiceModel.dll
SMDiagnostics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/SMDiagnostics/v4.0_4.0.0.0__b77a5c561934e089/SMDiagnostics.dll
System.ServiceModel.Internals
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Internals/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Internals.dll
PresentationFramework
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.dll
WindowsBase
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/WindowsBase/v4.0_4.0.0.0__31bf3856ad364e35/WindowsBase.dll
PresentationCore
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/PresentationCore/v4.0_4.0.0.0__31bf3856ad364e35/PresentationCore.dll
System.Xaml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18016 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xaml/v4.0_4.0.0.0__b77a5c561934e089/System.Xaml.dll
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
AdminUI.SmsTraceListener
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SmsTraceListener.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.EnterpriseManagement.UI.ConsoleFramework.resources
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/en/Microsoft.EnterpriseManagement.UI.ConsoleFramework.resources.DLL
Microsoft.EnterpriseManagement.UI.RibbonConsole
Assembly Version: 1.0.523.0
Win32 Version: 3.0.2085.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.RibbonConsole.DLL
RibbonControlsLibrary
Assembly Version: 3.5.41019.1
Win32 Version: 3.5.41019.1
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/RibbonControlsLibrary.DLL
PresentationFramework.AeroLite
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18046 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework.AeroLite/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.AeroLite.dll
Microsoft.EnterpriseManagement.UI.RibbonLayout
Assembly Version: 1.0.523.0
Win32 Version: 3.0.2085.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.RibbonLayout.DLL
Microsoft.Windows.Shell
Assembly Version: 3.5.41019.1
Win32 Version: 3.5.41019.1
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.Windows.Shell.DLL
Microsoft.VirtualManager.UI.ViewModel.Core
Assembly Version: 1.0.523.0
Win32 Version: 3.0.2085.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.VirtualManager.UI.ViewModel.Core.DLL
Microsoft.EnterpriseManagement.UI.Controls
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.Controls.DLL
Microsoft.EnterpriseManagement.UI.RibbonData
Assembly Version: 1.0.523.0
Win32 Version: 3.0.2085.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.RibbonData.DLL
AdminUI.HelpSystem
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.HelpSystem.DLL
AdminUI.UIResources
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.UIResources.DLL
AdminUI.PersonalFolders
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.PersonalFolders.DLL
AdminUI.ConsoleGlobalSearchView
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ConsoleGlobalSearchView.DLL
PresentationFramework.Classic
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework.Classic/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.Classic.dll
Microsoft.EnterpriseManagement.UI.Controls.resources
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/en/Microsoft.EnterpriseManagement.UI.Controls.resources.DLL
WindowsFormsIntegration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/WindowsFormsIntegration/v4.0_4.0.0.0__31bf3856ad364e35/WindowsFormsIntegration.dll
PresentationFramework-SystemXml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework-SystemXml/v4.0_4.0.0.0__b77a5c561934e089/PresentationFramework-SystemXml.dll
PresentationFramework.Aero
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework.Aero/v4.0_4.0.0.0__31bf3856ad364e35/PresentationFramework.Aero.dll
PresentationFramework-SystemCore
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework-SystemCore/v4.0_4.0.0.0__b77a5c561934e089/PresentationFramework-SystemCore.dll
UIAutomationProvider
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/UIAutomationProvider/v4.0_4.0.0.0__31bf3856ad364e35/UIAutomationProvider.dll
UIAutomationTypes
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/UIAutomationTypes/v4.0_4.0.0.0__31bf3856ad364e35/UIAutomationTypes.dll
AdminUI.Controls
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Controls.DLL
AdminUI.Common
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Common.DLL
Microsoft.EnterpriseManagement.UI.WpfViews
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.WpfViews.DLL
Microsoft.EnterpriseManagement.UI.ViewFramework
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.EnterpriseManagement.UI.ViewFramework.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Management
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
AdminUI.WqlQueryEngine
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.WqlQueryEngine.DLL
AdminUI.WqlInitializer
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.WqlInitializer.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.CollectionMenuActions
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.CollectionMenuActions.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.OSImage
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.OSImage.DLL
AdminUI.AssetIntelligence
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.AssetIntelligence.DLL
AdminUI.SoftwareMeteringRule
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SoftwareMeteringRule.DLL
AdminUI.DcmProperties
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.DcmProperties.DLL
AdminUI.UsmPolicy
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.UsmPolicy.DLL
AdminUI.ClientAgentSettings
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ClientAgentSettings.DLL
AdminUI.FirewallPolicy
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.FirewallPolicy.DLL
AdminUI.LegacySWD
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.LegacySWD.DLL
AdminUI.ConditionalDeliveryRule
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ConditionalDeliveryRule.DLL
AdminUI.VirtualEnvironment
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.VirtualEnvironment.DLL
AdminUI.SideloadKeys
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SideloadKeys.DLL
AdminUI.SoftwareUpdateProperties
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SoftwareUpdateProperties.DLL
AdminUI.Driver
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Driver.DLL
AdminUI.DriverPackage
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.DriverPackage.DLL
AdminUI.Subscriptions
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Subscriptions.DLL
AdminUI.Queries
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Queries.DLL
AdminUI.SrsReporting
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SrsReporting.DLL
AdminUI.SiteHierarchyVisualization
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SiteHierarchyVisualization.DLL
AdminUI.SystemStatus
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SystemStatus.DLL
AdminUI.ClientOperation
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ClientOperation.DLL
AdminUI.ClientHealth
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ClientHealth.DLL
AdminUI.ContentMonitoring
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ContentMonitoring.DLL
AdminUI.AntiMalware
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.AntiMalware.DLL
AdminUI.CloudServiceRoles
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.CloudServiceRoles.DLL
AdminUI.SiteHierarchy
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SiteHierarchy.DLL
AdminUI.SiteBoundaries
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SiteBoundaries.DLL
AdminUI.ExchangeConnector
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ExchangeConnector.DLL
AdminUI.Addresses
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Addresses.DLL
AdminUI.ActiveDirectory
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ActiveDirectory.DLL
AdminUI.AzureServices
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.AzureServices.DLL
AdminUI.RbacUser
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.RbacUser.DLL
AdminUI.RbacRole
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.RbacRole.DLL
AdminUI.RbacCategory
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.RbacCategory.DLL
AdminUI.Package
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Package.DLL
AdminUI.Certificate
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.Certificate.DLL
AdminUI.SiteSystems
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.SiteSystems.DLL
AdminUI.HomePageView
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.HomePageView.DLL
Microsoft.EnterpriseManagement.UI.WpfViews.resources
Assembly Version: 7.1.1000.0
Win32 Version: 7.1.3825.0
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/en/Microsoft.EnterpriseManagement.UI.WpfViews.resources.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.ViewCommon
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ViewCommon.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.AICustomizeCatalog
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.AICustomizeCatalog.DLL
AdminUI.AISoftwareProducts
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.AISoftwareProducts.DLL
AdminUI.ConsoleView
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ConsoleView.DLL
AdminUI.External.Controls
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.External.Controls.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.18046 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
System.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
PresentationFramework-SystemData
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/PresentationFramework-SystemData/v4.0_4.0.0.0__b77a5c561934e089/PresentationFramework-SystemData.dll
Microsoft.ConfigurationManagement.DialogFramework
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/Microsoft.ConfigurationManagement.DialogFramework.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.DialogFoundation
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.DialogFoundation.DLL
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929 built by: FX45RTMREL
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
AdminUI.DetailPanel
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.DetailPanel.DLL
AdminUI.FeaturesUtilities
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.FeaturesUtilities.DLL
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.0.30319.18058 built by: FX45RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
AdminUI.ConnectionAccount
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ConnectionAccount.DLL
System.Runtime.Caching
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.17929
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Caching/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Runtime.Caching.dll
AdminUI.ConsoleRootActions
Assembly Version: 5.0.0.0
Win32 Version: 5.0.7804.1000
CodeBase: file:///C:/Program%20Files%20(x86)/Microsoft%20Configuration%20Manager/AdminConsole/bin/AdminUI.ConsoleRootActions.DLL
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
When I go and check the Endpoint Protection properties it gives me the following Error:
The SMS Provider reported and error
With the following Details:
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "ERROR ON Property Convert";
ErrorCode = 0;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspsitesettingitem.h";
Line = 377;
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_SCI_ClientComp WHERE FileType=2 AND SiteCode='CCM' AND ItemName='Antimalware Agent' AND ItemType='Client Component'";
ProviderName = "WinMgmt";
StatusCode = 2147749917;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
at Microsoft.ConfigurationManagement.AdminConsole.SiteSystems.EndpointProtectionSpynetControl.InitializePageControl()
at Microsoft.ConfigurationManagement.AdminConsole.SmsPropertyPage.OnInitialize()
System.Management.ManagementException
Unexpected error
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
at Microsoft.ConfigurationManagement.AdminConsole.SiteSystems.EndpointProtectionSpynetControl.InitializePageControl()
at Microsoft.ConfigurationManagement.AdminConsole.SmsPropertyPage.OnInitialize()Hi,
If you only add one file into the excluded files and locations, does this error still appear?
Could you reproduce this error on another system?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
BPC MS 7.0 Error: An unhandled exception has occured: COM object
Hi all,
While doing any BPC Administration task such as processing dimensions from clinet, I get this error in a dialog box:
"An unhandled exception has occured in your application. COM Object that has been separated from its uderlying RCW can not be used"
Application exits after this error. I am getting this error for last few days. I am using Office 2003.
Please help.....
Regards,
AnkushJust to be on the sefe side, I would advise removing the admin client and then re-installing it. You may have had an update occur that has impacted the client and its abilities. This would be my 1st step to evaluate the issue.
Do you get this issue for all actions in the admin client? The other option, if this is only related to the processing of dimensions, is to enter the MSAS on the server and process the dimensions and applications. Then return to the client and try the admin operations again, in case something is out of synch.
Hope this helps.
Edited by: Petar Daniel on Aug 10, 2009 5:23 PM -
Hi all,
I am getting a fax error report that prints randomly and is not followed by a received fax. I ran the fax test and it passed and came back without any known problems. I have been receiving faxes daily, but not as many as before and I am wondering if I am not receiving faxes. The error report does not show where the fax came from.
Can anyone help?
Appreciative,
kelseyptHi kelseypt,
Welcome to the HP Support Forums! I see you keep getting Fax error reports printing from your HP Printer, this happens randomly.
To better assist you can you please let me know the following:
1. What is the Exact model of HP Printer you are using?
2. What is your current Operating system, Windows or Mac and which version?
3. How is the printer connected, USB or Wireless?
4. Do you get any error messages when you send a fax?
I look forward to hearing from you so we can get started!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!
Maybe you are looking for
-
Adobe Reader will not open PDFs
Adobe Reader will not open any PDFs. It will not open any new PDFs, downloaded from online, or old ones that have already downloaded and saved to a file. I have tried to repair Adobe Reader XI and reinstalled the most updated version. When I attempt
-
CPU overload during playback and record
This happens here and there but is not a consistent problem, and for that reason I feel that it can be corrected. Out of the blue, during playback or record, all of the sudden my CPU meter will start spiking and the audio will start getting interrupt
-
In my new company - we have to run a query from Oralce baed on A GRV created in Oralce application and save to result in Excell and import into MSSQL table. Presently we are doing in manuall daily. Is there any way i can automate it thru a batch of f
-
I am trying to import photos which my daughter has in her iphoto library '08 into my iphoto '08 library. She burned these photos to a dvd and gave it to me. When I select the files on the disk and "import to library" I can see the photos as they ar
-
Error in account determination: table T030R key
Hi for non modvatable tax i want the input tax to be added into material cost. i created tax codes using JMIP JECI and JSEI and assigned account key NVV, when iam selecting the taxcode at miro. the error message iam getting is "Error in account deter