Your Emitac Mobile Solutions LLC email service is deactivated, Email messages are no longer being sent to your Blackberry device

Hi 
I just got this message yesterday: Your Emitac Mobile Solutions LLC email service is deactivated, Email messages are no longer being sent to your Blackberry device. 
And since then, i havent being able to set up more than one email and i subscribed for 4. 
I have rebooted\,, sent service books and hard set the phone so many times.
What should i do?
Thank you

Hi and Welcome to the Community!
From your post, I cannot quite tell if you did all of this, in exactly this way. Hence, with a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Blackberry Pin release problem from Emitac Mobile Solutions LLP

    I just bought an old blackberry phone.
    Curve 9360
    PIN: {REMOVED}
    IMEI: {REMOVED}
    I want to use the BIS service but the operator just told me that the
    PIN is already registered at some different operator and you have to
    release the pin from there.
    The carrier is Emitac Mobile Solutions LLP. 
    Please suggest.
    Mod Edit: Edited post to remove personal information to comply with the Community Guidelines and Terms and Conditions of Use

    You have two possibilities so far as I know.....
    Track down last owner, or the owner that had the BIS, have the individual contact the carrier (not yours, the other carrier) and do whatever it takes to get the PIN released.
    Figure out the other carrier.  Explain the situation.  Ask for help.
    It's a tall order.  I think hope is slim, but who knows.
    If the device instead is actually blocked because it was reported stolen at some point, or someone walked out on finishing payments, you have no hope. 
    - Ira

  • Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

    Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

    Have you tried re-booting your WiFi router ?  It may seem OK on your PC, but a re-boot may help.

  • I tried to email pictures from IPhoto for the first time.  I chose to use my Yahoo server but mistakenly entered the wrong password.  Since then, every time I try to email pictures I get a message saying "The server didn't recognize your username/password

    When trying to email pictures from IPhoto for the first time, I chose to use my Yahoo server, but I mistakenly entered the wrong password.  Since then, everytime I try to email pictures I get a message saying "The server didn't recognize your username/password combination".  How can I correct this so I can email pictures using my IPhoto? 

    iPhoto Menu -> Prefences -> Accounts. Delete and recreate your email account.
    Regards
    TD

  • TS3276 my emails are not being sent from my desktop, but are capable of being sent by my apple phone.  as well, I cannnot pull up any emails that I sent.  They just disappear.

    my emails are not being sent from my desktop, but they are capable of being sent from my iphone 5.  Whatever I have sent just disappears from my desktop.

    R1: Seems you didn't configure you email account in your Outlook client properly. please refer to the following KB article and try to create a new mail profile to configure your email account again:
    http://support.microsoft.com/kb/2758902
    R2: Do you want create subfolders under Inbox to category your emails? If so, we can just right click on Inbox > select New Folder... After that, we need to create rules to move or copy your emails to each subfoler. See:
    http://office.microsoft.com/en-us/outlook-help/manage-email-messages-by-using-rules-HA010355682.aspx
    Besides, in order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently. Concerning your other question, I suggest we create new posts for your other questions via:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
    Thanks for the understanding.
    Steve Fan
    TechNet Community Support

  • I have an 2008 model MacBook running OSX 10.6.8 with an iphoto version 7.1.5. The services using this iphoto version are no longer offered. Will my MacBook run the newer iPhoto versions?

    I have an 2008 model MacBook running OSX 10.6.8 with an iphoto version 7.1.5. The services using this iphoto version are no longer offered. Will my MacBook run the newer iPhoto versions?

    You can run iPhoto 9.2.3 with the system you currently have. It's available thru iLife 11 as Niel has already mentioned.
    OT

  • Nokia email service and Virginmedia email address

    Hi, have successfully used email service with @blueyonder.co.uk on an e71 for 12 months.
    I am trying to set up a @virginmedia.com account on a friends E71 with no success. Is there a problem with this domain?
    Steve 

    Hi, I have exactly the same problem: blueyonder.co.uk works, virginmedia.com does not. Is there anyone who can please help us with this? 
    I wonder if it's something to do with a discrepancy between pop.virginmedia.com and pop3.virginmedia.com config. - but I can't get far enough to change it.
    Thanks for any advice,
    noknok63

  • SharePoint 2010, Visual Studio 2010, Packaging a solution - The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

    Hi,
    I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
    <Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
    to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
    I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
    "The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
    I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
    renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
    Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
    error logging. So we created another project in Visual Studio called:
    <Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
    And this is when the error has come back and bitten me! The scenario is now as follows:
    1. project1 packages and deploys successfully with long feature names and deep paths.
    2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
    I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
    1. By doing the following I can get project2 to package
    In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
    Clean the solution
    Shut down Visual Studio 2010
    Open Visual Studio 2010
    Rebuild the solution
    Package the project2
    et voila the package is generated!
    This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
    no longer be hanging onto something.
    Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
    solutions on a Build Server using automated builds.
    2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
    3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
    does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
    4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
    from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
    5. DebugView shows nothing useful during the build and packaging of the project.
    6. The error seems to occur in
    CreateSharePointProjectService target called at line 365 of
    Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
    project2 completely and recreate it and introduce it into my Visual Studio solution.
    Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
    Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
    project etc... and is actually workable in a meaningful Visual Studio solution.

    Hi
    Yes, I thought I had fixed this my moving my solution from the usual documents  to
    c:\v2010\projectsOverflow\DetailedProjectTimeline
    This builds ok, but when I come to package I get the lovely error:
    Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
    Now, the error seems to be related to 
    Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
    <metaData>
    <type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
    <importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
    </metaData>
    <data>
    <properties>
    <property name="Title" type="string">VisualProjectTimelineWebPart</property>
    <property name="Description" type="string">My Visual WebPart</property>
    </properties>
    </data>
    </webPart>
    </webParts>
    .... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
    Daniel

  • Mailing lists are no longer being parsed for individual address to be placed in the email 'To' field.

    When I attempt to use a Mailing List, which has worked in the past, to supply the addresses for an email which I wish to send, it fails with an error message as per this example:
    "MAILING LIST NAME (current)" <"MAILING LIST NAME (current)"> is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
    It seems that Thunderbird can no longer parse the Mailing List for the individual names and addresses.
    Do you need any more info?
    Thanks for your help.

    As you may need this fixed quickly: You could uninstall the current version via Control panel > Programs and Features and reinstall a previous version, download from here:
    Version 31.0:
    * ftp://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/31.0/
    Version 24.7:
    * ftp://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/24.7.0/
    click on the type for your OS. eg: If using Windows select 'win32'
    then select the language eg: en-GB = English british
    then download the .exe file
    The thunderbird program is not stored in the same place as your thunderbird Profile. So, uninstalling and reinstalling should not effect anything in the profile folder including emails, address books etc.
    However, it is always a good idea to backup your Profile, just in case :) You can use tools such as MoxBackup and/or ImportExporttool or manually copy your Profile folder to an external device. All info at links below:
    * http://kb.mozillazine.org/Profile_backup
    * http://kb.mozillazine.org/IMAP_backup
    * http://mozbackup.jasnapaka.com/
    * https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/

  • Palm Pre - You are no longer signed in to your Palm Profile on this phone

    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Archived email wiped after deactivating email account after Mail upgrade. Help!

    I recently archived very important email - it was email that I would no longer need to use, but the files EVERYTHING was very important for a later date.  So I deactivated said email account.  I upgraded to the new version of Apple Mail yesterday.  After wards I wanted to reactivate the account.  However the email that was in the archived folder is no longer there.
    HELP!

    If you are a corporate Blackberry Enterprise Server (BES) user - ask your BES admin to resolve this point on the server.
    Seems that on the server there is information that your device (identified by PIN) has already configured mail account.

  • The body of my emails are no longer being displayed...

    ...what gives?  This just started to happen yesterday and applies to all my accounts (gmail, msn, and MS Exchange).  In the preview of the emails on the left when holding in landscape, I can see the preview of the body.  On the right where the entire message is supposed to be displayed, I see the header (From and To) as well as the Subject line with the date and time, but below that is nothing at all.  Very strange!!  Help!!!

    Try closing the Mail app completely and see if they show when you re-open it : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • If i have multiple email addresses for one iPod that are no longer in use (and i've since forgotten the passwords), what do i do to transfer that music back into my iTunes library?

    Help! None of the music on that iPod is on my computer ever since I had to reinstall my os. The iPod has massive amounts of unused space, but I can't access it. What do I do?

    The sort fields should generally be empty unless you've putting in custom values to sort solo artists by their surnames. You can apply common changes to thousands of tracks at once, just don't apply the wrong change because there is no undo.
    It is a good idea to backup before undertaking large scale changes. See this backup tip for a suggested approach.
    tt2
    Message was edited by: turingtest2

  • The full content of my email messages are no longer downloaded

    I can see everything except the full content of the mail ???
    can anybody help me what is suddenly happening?

    Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
    If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • TS2481 I'm getting an error message saying, "You can't open the application Microsoft Sync Services because Power PC applications are no longer supported."

    This was immediately after I downloaded Lion. None of the other applications open, I'm getting a similar error message. I can't get online either.

    PowerPC emulation has been dropped in Lion. This is one of the big reasons people try to downgrade back to SL.

Maybe you are looking for