0SD_C03 - Product Category Not Loading

I have an issue where the field 0PROD_CATEG is not being populated in cube 0SD_C03. Looking at the data from 2LIS_11_VAHDR I see that its trying to map 0PROD_HEIR -> 0PROD_CATEG.
Here is the code for the mapping:
The problem is that product category is all ways blank. The COMM_STRUCTURE-prod-heir is allways '999999999999999'.
I see that product category is an master data info object but we don't use product category. I was wondering if I could swap out 0PROD_CATEG for 0PROD_HEIR but since 0PROD_CATEG is a part of the Key im not sure if its that easy (Or maybe it is).
At the end of the day I want to be able to report on HEIR or Category and say for the month of Jan we sold x number of widget A, B, C. The product category or Heirarchy can help with this if I can get it loaded.
Any ideas whats going on with the code and can I just remove product category and map product heirarchy instead?
Thanks,
larry

Hi Larry,
are there 16 Key figures defined in the target? If so is this the reason that 0PROD_CATEG is concactenated in the target? i.e. 16 KF's is the limit when mapped directly in a standard DSO, you can check the limitations in the following note....
1837308 - FAQ: Technical limitations of InfoProviders and Characteristics in BW
You could consider mapping some of the KF's as standard data fields if so,
Thanks,
Colm

Similar Messages

Product category not visible in search help

Hello,
We have performed changes to product categories in Dev system and moved it to Q. I can see all the cateogories correctly in COMM_HIERARCHY, but when I try to add them in the org structure to users, I can't find them.
Any idea, why this could happen?
Thanks for your help.
(We do not replicate categories from R/3 but create in SRM)
Regards,
Snehal

Hi Snehal
How are you trying to map your product categories in organisational structure?
via extended attribute? for eg. product category?
how did you move from dev to Quality ?
i believe you can create(load) hierarchy in quality which you might have done in development?
define product category in your SPRO settings
srmlogical system backendlogicalsystem
br
muthu

Product category not available error in SAP CRM 7.0

hi Gurus,
while i try creating opportunity transaction, there under product tab when i enter product category(as we maintian product category and not product) and pass on other data and finally press enter ..i get error "product category "3lAA" not available" same for other category. even when i try F4 help only very few categories it shows, not all.
but then i went back and checked for category and hierarchy in CRM system ..it is showing all there and it is downloaded form R/3 system.
Can you please tell me what all places i can check..? or what is missing ?
Thanks,
gaurav

Hi,
I believe all the categories which you are viewing currently in the pop up are from a single hierarchy ( Most probably R3PRODHIER). And the categories which you are looking for is probably from a different hierarchy ( R3MATCLAS, R3PRODSTYP etc.).
By standard, for sales applications only R3PRODHIER is supported. Please have a look at the IMG path Cross-Application Component->SAP Product-> Product Category->Assign Category Hierarchy to Applications, where you can verify this. If you are so particular about using categories from a different hierarchy you might need to change this setting - I am not sure about other implications that can cause if you change that like downloading from R/3 etc.
Regards,
Sreejith

Product category not replicating

Hi,
I have a product categoty in Table T023 in backend system.I am trying to replicate it to SRM.
I run R3AS choosing the source system and it run successfully.But when I checked in Comm_Hierarchy I can't find the Product category.
what is the problem?
Thanks
Raajendra

Hello Raajendra,
Use the Middleware SAP menu below:
SAP menu > Tools > Middleware: Basis > Monitoring
Check transactions inside folders Data Exchange, Message flow and Queues.
Look by yourself threads dealing with product categories replication.
Regards.
Laurent.

Product Category not transferred from CCM 1.0 to Shopping Cart

Hello all,
I have a problem where user choose item from integrated SAP catalog CCM 1.0 and add it to the shopping cart (EBP is 5.0).
When SC is displayed Category is different than in catalog.
I have only one backend (R/3 4.7) working in classic scenario.
During testing I copied material groups several times from the same backend with TCode R3AS but using FM BBP_CATEGORY_GET_GUID I checked that I have only one GUID per product grup in EBP.
User does not have default category.
In OrgStructure > Extended Attributes there is no limit on Product Categories ("*" for backend system). In this case EBP is always using alphabetically the first listed category.
If I list categories in Extended Atributes, system always use the first listed and not the proper one from the catalog.

Hello Vadim,
I should be now red due to the mistake that I made in catalog files.
In file for Supplier Catalog I did not include /ccm/product_group. After I did it everything went OK. I was thinking that CategoryID is enough. :blush:
Your answer pointed me to right direction.
Gordan
P.S. Instead of inserting breakpoints you can use procedure explained in note 847229 "OCI data passed from CCM/SRM"
Message was edited by: Gordan Flego

CreatePDF Plug-in Not Loaded

When I downloaded Acrobat XI Pro, it appears that the CreatePDF feature was certified for the product, but not loaded.
I was under the impression that it was a part of the download, and now need to load the plug-in. I am unaware as to how to obtain the plug-in and load it to complete the downloaded version of the Acrobat software.
Any assistance would be greatly appreciated.
Thank you.

You did not state the program, but I would guess OFFICE 2013. To get AA XI to work with OFFICE 2013 you have to do the updates (2013 came out AFTER XI). That may solve your problem. You may also have to go to the options in your office product and enable the addin. It would have been useful to know your version of OFFICE (assume that is what you are talking about) and the OS. There may be issue of incompatibilities that are related to these versions.

Query Regarding Default Product category set up in SRM server

HI SAp Gurus,
Plesae note that I have created one dummy product category - Test under R3MATCLASS using TC - COMM_HIERARCHY and set in the extended attribute of the root organization level.
Also done the validation in BBP_DOC_CHECK _BADI.
In SRM portal it is reflecting the text as *Please select a product category from list* in Category field as I set in SRM server.
But when I try to select "Add To Shopping Cart" Button it displays the following error messages that -
1) Enter A comapny Code
2) Enter a unit of measure
3) Plant for follow-on document missing
4) System FCSCLNT110 of purch. organization M&S Purchasing Organisation differs from doc. reference FSSCLNT480
5) Error in account assignment for item 1
6) Error calling META BAPI META_CALCULATE_TAX
7) Not possible to calculate tax
8) Error occurred calling META_BAPI_DISPATCH
9) The cost center has not been assigned in the account assignment
When I select the valid product category which is replicated to SRM from ECC , it does not display any error message.
I think the dummy product category - Test which I have created directly in SRM is creating the problem . and displays an error message-
System FCSCLNT110 of purch. organization M&S Purchasing Organisation differs from doc. reference FSSCLNT480
I have also check that when i click Add to Shopping Cart Button - The item_check Badi is also triggered . When I set up the break point there for debugging purpose its not triggeing and coming up with the above error messages.
Kindly advice and do the needful.

Hi Muthu,
I confirm that have successfully created the dummy product Category at SRM server and maintained in the extended attribute tab at the root organization level.
Bu the new problem raised - a warning message - No authorization to purchase from product category - Test
For that in PFCG TC we are setting up the autorization level as Low for Startegic Purchasing Role.
But even then the great problem is - when i click add to shopping cart button the line item is not created in step 2, since I have selected the dummy product category not the one which is replicated from backend. Otherwise if i select the one which is replicated from ECC its showing me the one line item in the next screen.
Can any one please advice.

Pages on Adobe Web Site Do Not Load

This might be more properly an OS X issue, since Firefox behavior is the similar.
Certain pages at the Adobe web site simply don't load on my browser. Plug-ins are enabled in preferences, and I turned off pop-up blocker just to see if that made a difference, it didn't work.
There are some pages that never load - the Creative Suite and InDesign product pages
http://www.adobe.com/products/creativesuite/
for example. (Note: on Firefox the page above would not load, but his page:
http://www.adobe.com/products/indesign/whatisindesign/
seemed to work fine).
Sometimes (on Safari just now), even the main product page
http://www.adobe.com/products/
would not load (when it had been loading).
This is since the 5.0.4 and 10.6.7. updates (I don't visit the Adobe sites regularly but was contemplating a purchase of Creative Suite).
Anybody else having these issues?

Hi,
From your Safari menu bar click Safari / Preferences then select the Security tab. Click: Show Cookies.
Delete all Adobe related cookies.
Restart Safari and try the Adobe site.
If you still have problems, from the menu bar again click Safari / Reset Safari. Select the top 7 buttons, click Reset.
Restart Safari. Try again. If you still have problems, follow the instructions at this link to uninstall then reinstall the Flash plugin.
http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,
Then repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. *When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac*. If you see a long list of "messages" in the permissions window, it's ok. As long as you see, "Permissions Repair Complete" when it's finished... you're done.
If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US 
Carolyn
Message was edited by: Carolyn

Online card security Verified by Visa and Mastercard Securecode will not load since Firefox updated so unable to make purchases using Firefox.

The additional Fraudsafe security feature used by Mastercard and Visa when buying products will not load since the Firefox update so no purchases can be made and I have to swap to using Internet Explorer instead :(

Just found a previous post also reporting this problem https://support.mozilla.com/en-US/questions/818366?s=visa&as=s

GL Account/Product category mapping not working in transported client

We have implemented SRM 5 and an Ecc 6.0 backend.
We have transported the GL Account /Product category mapping config from the DEV client to the Quality client. In the quality client we run BDLS to set the correct backend system for the GL account/product category mapping.
When we create a shopping cart, GL accounts are not determined. We have noticed that in table BBP_DET_ACCOUNT, the backend system is still pointing to the DEV client backend system not the quality client backend system. Why is this?
Do we have to always manually reset this config in every client that we transport this table if we have new or changed entries?

Hi,
See this related threads:
Re: Client Copy SRM from prod to dev -Urgent
product category creation and g/l account assignment updation
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Pur Grp and product category changes made in R3E not reflecting back to SRM

Need to investigate why changes made to Purchase Requisitions in SAP R/3 (Purchasing Group & product category) doesn't feed back to SRM.
Purchasing Group and product category changes made in R3E do not reflect back in SRM.

Hi Sanjay,
You should also schedule report BBP_GET_STATUS_2 (updating requirement coverage
requests) to run in the Enterprise Buyer system, so that information on the status of purchase
requisitions, purchase orders, and reservations is up-to-date.
I hope,this helps.
Regards,Nishant

Product category does not exist in logical system

Hello Experts,
Need help in understanding product category change behaviour.
Shopping cart created and approved.
PO created and approved.
Now PO change version created by changing product category.
Please enlighten me whether this change is really allowed on business perspective and SAP perspective.
So far we been told that there is business case to justify this change.
If allowed by SAP, then how do we solve the problem of error occuring in workflow "product category does not exist in logical system XXXX".
Please advise.
Thanks,
Gaurav

Hi
I dont have a system right now to check
1.are you ordering the item from external catalog? ( any mapping between catalog product category to SAP product category )?
2. after approved PO created.
3. Now BUYER could change the product category again?
4. why the BUYER takes push ups for REQUESTER . Let Buyer cancel the PO and ask requester to create a PO.
What is the business process existing in your business ?
Since product category determines purchase group and every thing like gl account etc..
Can you recreate the same issue in development box?
Note 1466155 - GL account not re-determined on change of product categorySymptom
You have an SRM PO with items having multiple account assignment. Go to the PO item overview OR to the item basic data tab and change the product category. However, this does not trigger a new GL account determination for the accounting lines.
Note 1407962 - Category is editable when contract is assigned in PO item
Symptom
When ever a Contract item (Free text or Product Category) is assigned to a Purchase order free text line item, The category modification is not allowed. This is because the product category is always copied from the contract item and overrides the Category for Purchase Order Item. It is confusing for the user as the category is editable and can't be modified.
SAP has different different behaviors . Kindly tell us what type you belongs too...

After 6 tries to load Photoshop CS6 on my new laptop, I keep getting the following message after I enter my valid serial number: "Serial number you provided is valid but a qualifying product could not be found on this computer." What I'm, trying to do is

After 6 tries to load Photoshop CS6 on my new laptop, I keep getting the following message after I enter my valid serial number: "Serial number you provided is valid but a qualifying product could not be found on this computer." What I'm, trying to do is download the qualifying product which I purchased just a year ago? Any help will be greatly appreciated.

I contacted Adobe support Chat and they confirmed the serial number and gave me a response code number to enter. Once that was entered the product downloaded immediately. The whole process took 10 minutes. Thank you for your response. I'm all good now.

"Add to Shooping cart" button does not work when changing Product Category

Dear all, we are running SRM 4.0 Classic scenario and we have a strange problem with Product Category field. When click on the "Describe Requirement", it opens the shopping cart page with the Product Category field and the default value is coming from favorites. As long as you dont change this value , enter the other fields and click on the "Add to shopping cart" button, then it works. If the users try to change this value on this page to select a different value from the drop down, then the "Add to Shopping Cart" button does not work. Has anyone encountered this problem before. Users are getting frustrated with this behaviour. Any help to fix this issue is appreciated. Thanks in advance.
Regards
Gabriel Bertrand

Dear Disha, this is what is the behaviour.
Suppose, if for a particular user, there are 4 items listed as favorites in the Product category and one of them is a default value. If you don't make any changes to this value and then click on Add to Shopping Cart, it works. If you try to select a different value other than the default from the favorites, then the Button does not do anything.You click on it nothing happens and cannot go to the next page. Also all the links are disabled (ie Describe Requirement / Old Purchase Order and Template)
If we dont change the value for Product category and go to the next page (with default value) and then change the Product category here, it works (Continue button works and were able to Order or Hold).
Thanks
Regards
Gabriel

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

0SD_C03 - Product Category Not Loading

Similar Messages

Maybe you are looking for