0xC00D36C4 MF_MEDIA_ENGINE_ERR_SRC_NOT_SUPPORTED for AVI that should work

(Hello,
I have been using Windows Media Foundation for some time and it works well. I can open and read many video without problems.
But recently, I tried to open a sequence which fails. This is an AVI with the following streams:
Video : WVC1 1712x1280, 4:2:0 YUV
Audio : PCM S16 LE 8000Hz, 16bps
I am under Windows 7. Windows Media Player opens it perfectly, as well as VLC.
But when I try to open it myself with such methods as IMFSourceResolver::CreateObjectFromURL or MFCreateSourceReaderFromURL, I get an HRESULT 0xC00D36C4 (MF_MEDIA_ENGINE_ERR_SRC_NOT_SUPPORTED)
What could be the problem ?
[Edit]
Without sucess, I tried the MF_RESOLUTION_CONTENT_DOES_NOT_HAVE_TO_MATCH_EXTENSION_OR_MIME_TYPE flag

Even though the Player Framework claims to support MPEG-DASH via the DashDownloaderPlugin, I do not think the framework actually supports true DASH content (.m4s for mp4 containers or .ts for MPEG-2 containers).
All of the example URIs MS provides for testing "Dash" content contain the .ism extension -- which is actually associated with MS Smooth Streaming content (.ismv), not MPEG-DASH. But because Smooth Stream content is similar to DASH in that .ismv
files are simply fragmented MP4 files, just the same as DASH .m4s files, it is possible to ‘trick’ a server into delivering .ismv files to any Dash client by simply creating DASH init segments and a MPD. I believe this is what Microsoft Azure does in delivering
"Dash" content via their Dynamic Packager if you provide them with a Smooth Stream.
This means the Player Framework can play Smooth Stream content packaged as "Dash", for example:
http://wams.edgesuite.net/media/SintelTrailer_Smooth_SeekDemo/sintel_trailer-1080p.ism/manifest(format=mpd-time-csf)
but it cannot play true MPEG-DASH content, for example:
http://dash.edgesuite.net/dash264/TestCases/1a/netflix/exMPD_BIP_TC1.mpd
References:
Building "Dash" A/V Apps w/ Player Framework
Serving "Dash"with IIS
Azure Streaming
Test Content URLs

Similar Messages

Why am I being billed for equipment that never worked from the get go, and that your representatives admitted never connected to the computer on your end?

In September my husband and I were planning a cross country move and we thought that having a Jet Pack to go on line with while we were traveling would be a good idea. When we ordered it we told the representative that we did not need it until the 1st of Oct. as that was when we would be leaving. It arrived on our door on Sept 9th with the instructions to be sure and activate it within 2 weeks or we would lose the line. On the 19th we called in the activation and everything appeared fine. We hit the road on the 1st and Nothing, Na-Da, Zip, Zilch .... The equipment never worked from the get go! We called Verizon from the road on the 4th of Oct. to find out what was going on and the representative told us that the problem was with the computer on Verizon's end. We shut the equipment off for the rest of our trip and called for a refund on the 13th of Oct. We spoke to a representative named Juan, who again confirmed that it was Verizon's computer that had been the problem, and we were assured that all fee's associated with the Jet Pack would be waived as the equipment never worked in the 1st place. He told us all we needed to do was return the broken equipment and that he would send us a return label. We received the return label and sent the equipment back on the 22nd of Oct. On our next bill no credits of any kind had been applied? We promptly picked up the phone and called Verizon again, on Oct 31st, to find out what was going on? This time we spoke to Lou Ann. After about an hour and a half she finally managed to remove the fee's, or so we thought, and we hung up satisfied. On 11/5 our Nov. bill arrived again with no credits of any kind. We thought maybe the billing cycle hadn't had time to catch up with our most recent conversation so we called just to verify. This time we spoke to Moncheria. She did not understand what had happened and had to reenter the same refund that Lou Ann had earlier. Again another hour and a half on the phone. Today,11/28, we received our most recent bill and again no credits of any kind??? We picked up the phone and called again. This time we explained to Christian, (the above story), and she put us on the phone with her supervisor Carson. Carson proceeded to tell us that ALL of the previous representatives we had spoken to were wrong and that since we had not returned the equipment within 14 days of receiving it that we were beyond the limits of the refund policy, (which means we would have had to return it before we left on our trip), and the best she could do was offer us coupons for the future to offset THEIR mistake! No thank you I will keep my cash in my pocket!
1st of all we ordered it for the 1st of Oct. not for 9th of Sept.
Secondly we were told to be sure and activate it within 14 days or we would lose the line, never any mention of a refund time limit. (Who buys stuff anticipating an immediate refund?)
And 3d THE EQUIPMENT NEVER WORKED IN THE 1ST PLACE!!
Now Verizon is asking for $343.34 in fee's for something that never worked in the 1st place!! This is ridiculous and those fee's are defiantly under dispute! The way I see it trying to hold me to a contract that Verizon breached by sending out faulty equipment is just wrong!

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Billed for services that wasnt working

I have been trying to get my bill and my service is corrected since the start of my service on April 17 my telephone was supposed to be ported in from AT&T and was not done until two and a half months later and my internet has never worked since I signed up because the service person that was supposed to set it up never came back to set it up now I'm expected to pay a bill from April 17 still present for services that didn't work I have tried calling comcast on several occasions have sat on hold for hours at a time trying to get somebody to talk to me any billing to get this resolved and I get nothing how do I get this taken care of

Contact iTunes Support.

TS1702 refund for app that dont work

how do i get a refund for a app i pay for but i didnt work on itunes

Refunds from the App Store or iTunes Store
Or you can try to download a version of the app that IS compatible:
App Store: Downloading Older Versions of Apps

Permissions problem Should I switch to a PC for something that will work ?

When I try to repair disk permissions it says
Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on
"System/Library/QuickTime/AppleProResDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
I am supposed to do a show in less than a week (vjing) - I have been threw 3 ibook/macbook lemons (4 logic boards, every optical drive died, every battery died) - anyways, sorry for that rant.....
I really need someone to help me, I am not near a city or a mac store - aghhhh......
Disk Utility crashes on me ! as does Disk Warrior, and tech tool pro !
If I start up from my system DVD Disk utility will find problems and repair them, only from DVD... but they come back within a week ! It won't do anything out the permissions problem though..
All my VJ aps crash crash crash
I have the spinning beach ball all the time random, machine is way slower than it was new less than a year ago...
Please help, I am going nuts, spend another day of my life in the black hole with a broken mac, my girlfrends PC has never had a problem in 3 years !

Maybe you have hardware problem.
I would try running the extended version of your Apple Hardware Test.
It's not perfect but may flag something.
A more thorough test for RAM is the free Rember.
Use the extended test also.
Here's a nice faq on RAM testing.
DALE

OK icacls command that should work but doesn't.

icacls "c:\windows\system32\spool\PRINTERS" /grant administrators:(IO)(CI)(OI)F /t
When some of my systems go to print a PDF the spooler just locks up. I can't control what type of PDF files are coming in as they are made by all kinds of software and so the problems begin. I have been working on a batch file that will stop
the spooler service if it hasn't already, then run the above command to grant rights to the indicated directory so that the offending files can be deleted from the spooler and restart the spooler service after that has happened. The reason for this is
that by default a user can't go in and delete the files. I believe that I have the command correct and it used to work fine in Windows XP and Windows 7 but I can't see why it doesn't work in Windows 8.
Here is the batch file. Please tell me what I have wrong in it.
net stop spooler
timeout/t 3 /nobreak
icacls "c:\windows\system32\spool\PRINTERS" /grant administrators:(IO)(CI)(OI)F /t
c:
cd\windows\system32\spool\PRINTERS
Del *.s*
timeout/t 3
net start spooler
exit

If you run icacls "c:\windows\system32\spool\PRINTERS" /grant administrators:(IO)(CI)(OI)F /t manually,
what output do you get and what is the resultant ACL on the files?
Also, you shouldn't use the /t switch - it tells icacls to recursively apply that ACE for every subitem
in that folder rather than let NTFS handle it via inheritance. The only time you should use it is when you really need to apply a specific ACE explicitly to all items in a folder, for instance:
icacls "C:\temp" /grant administrators:F /t
The above command will explicitly grant Administrators full control on every item in that folder (this
item only - no inheritance).

Error when starting a jnlp that should work fine

When i try to launch a jnlp file with Web Start, I get an "Unable lo launch the application" error right after the "Java Starting..."-splash appears.
Details:
MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
     at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
The jnlp:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase = "http://aoc.idi.ntnu.no" href = "aoc3.jnlp">
<information>
    <title>Age of Computers 3</title>
    <vendor>Datamaskiner Grunnkurs</vendor>
    <homepage href = "http://www.idi.ntnu.no/~joh/"/>
    <description>Spillbasert �vingsopplegg for datamaskiner grunnkurs</description>
</information>
<resources>
    <j2se version = "1.5+"/>
    <jar href = "aoc3Client.jar"/>
</resources>
<security>
    <all-permissions/>
</security>
<application-desc main-class = "aoc3.client.Client">
    <argument>aoc.idi.ntnu.no</argument>
</application-desc>
</jnlp>(As far as I can see, it's not missing the <jnlp> tag...)
The jnlp and application runs fine on other computers, so the problem must be on my computer.
I'm running 1.6.0_07, and the application requires 1.5 and Web Start. The jnlp's on http://java.sun.com/javase/technologies/desktop/javawebstart/demos.html works fine.
What can I do to get the jnlp to work on my computer?
Edited by: newbie1986 on Aug 29, 2008 4:12 AM

OK, so here's the thing. It turned out that the wireless connection I'm using is (probably) blocking the port that the application needs, but no "connection error" message is shown, so it's impossible to tell why the application doesn't start. I've started a VPN, and now it works, so I guess it's a problem with the ports on my wireless!
I'm still not sure why I had to delete the cache though...

Best modem/router for AEBS that actually works?!

Hi,
I have had so many problems with my AEBS it's unbelievable! If someone could suggest a modem/router that works well with the AEBS so i can set up my wireless network that would be great! So far i have tried the netgear DM111P modem & the d-link 320T modem. Both do not seem to work, i can get onto the internet connecting directly to each of the modems but when i comes to connecting to the internet through the AEBS with the modem attached there is nothing. But i can connect one computer if the AEBS is in bridge mode, which is pointless as i need to share the connection. So any suggestions to help me or on a modem/router which will actually work, i would appreciate it a lot!
Many thanks!

faganel wrote:
Hi,
I have similar to this one ( http://www.asus.com/products.aspx?l1=29&l2=172&l3=743&l4=60&model=1277&modelmenu =1 ), but a one or two years older and till now I haven’t lose a connection.
I’m accessing to this with iMac, Win (HP, IBM) laptops, iPhone… one of the best investments (beside iMac and iPhone.. )
I have a PC with an ASUS MB (see my profile), and have great respect for ASUS products. I was not even aware that they made routers.
Thanks for the information.

Paid for App that stopped working

I am a Newbie and paid for a Weather app that just stopped opening and working. Can anyone help me with how to resolve that problem?

Hi Eric,
Haven't had that happen dealing with the app store, they have been good about reloading paid-for apps. I have had to learn to just trust them when downloading free apps when they ask for login and authorization to purchase, which actually does not result in a charge for free apps.
You could also file a user review note that the app stopped working and see if you get a response. When things like that happen, there are often updates to apps that are free downloads since you already paid.
If that particular app is really important to you right away, you could go through the download/possible charge and see if you end up getting charged for it. May just be a formality that doesn't result in a real charge to your credit card.

Material type for BOM that should not create production order

Hello all,
We have following situation in our company:
We ship few products say for e.g A,B,C which are part of higer level BOM for product M1 to the customer, before the actual product M1 is shipped.Currently these ship-a-head products(A,B,C) is also part of BOM for M1.
We need to combine these ship-a-head products A,B,C as one product M2 (thinking of a BOM) and ship that M2 to customer before M1 is shipped.
In that case what could be the material type for product M2 so that MRP won't create any Production orders for M2.
Also wondering Is there any other way, other than creating a BOM that could combine products A,B and C and ship to customer a-head of time.
Thanks,
Sre

Hi,
Please create BOM for Material M2 by using usage other than production..
1     +     .     .     -     -     -     .     Production
2     .     +     .     -     -     -     .     Engineering/Design
3     .     .     .     .     -     -     .     Universal
4     -     -     .     -     -     +     .     Plant Maintenance
5     .     .     +     +     -     -     .     Sales and Distribution
6     .     .     +     .     -     -     .     Costing
7     .     -     .     .     -     -     -     Empties
8     -     .     -     -     -     -     -     Stability Study
M     .     .     .     .     -     .     .     External Munitions Display
hope it may help you.
Kuber

HT201363 how can i or can i get reimbursed for apps that wont work on my iphone5

cant get some apps to work please help

Hello hellonthehighway,
The article linkeed below details the steps for reporting such an issue to the folks in our iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

Unable to run Xilinx 2014.3 SDK for workspace that had worked.

   Hi,
   I have been developing a Linux application for ZC702.   Starting up the SDK i get the workspace path prompt but
   after selecting the workspace the SDK crashes.   I removed the .lock file in .metadata folder to no avail. I examined the .log file (attatched) and there are several Eclipse errors.
When selecting a previous workspace the SDK starts up fine.   I would like to fix the old workspace and on another note, how do I create a new workspace?
Regards,
Ross.

No reaction yet. But perhaps it was because I did not ask a specific question:
Does any one knows what can cause this error message:
Unable to run OpenSectioncommand.Null Content object for module: cds.explorer.
Thanks in advance,
Detlev
Edited by: Detlev on Nov 4, 2010 9:01 PM

ATV V1 and V2 on same network. That should work, right?

ATV version 1 and version 2 can be used on the same network, right? assuming so. i see V1 selling on craigslist for 25-50 bones and figure i can outfit the rest of my TV's with them. anyone had issues? thanks!

3 1's and 3 2's here, no problems for me

New nb heatsink for neo2 that will work with nv5/ati4 silencer

the nb fan is by far the loudest fan in my system, even with cnq running. has anyone that has the latest arctic cooling silencer installed come up with a replacement heatsink? there's not a lot of room left between the nb fan and my silencer. :(

bvmulanab,
I noticed that the Vantec was a little bit quieter than the fan that came on the board. As far as temps go, I'm not sure. There was hardly any grease on the chip at all. I replaced with AS5. On the Arctic Silencer, the idle temp is around 54c but the load temps are alot lower than the stock hsf, highest I have got is 65c after a couple hours of Desert Combat. Ambient temps have alot to do with cooling though. Usually around 78 F here

Program should work for any DB..and give me the space detials..!

Hi All,
I have a requirement like, whatever the SAP Report program im going to write that should work for any underlying DB.
Like I have bunch of tables like LFA1, MARA etcu2026
I wll check like if sy-dbs = u2018ORACLEu2019
Here I need some code (Table) / FM (ORA) should be there to give me the used space and free space of that particular table like LFA1.
Else I wll check like if sy-dbs = u2018DB2u2019
Some code/FM like above to give me used space and free space.
Else I wll check like if sy-dbs = u2018Sybaseu2019
Some code/FM like above to give me used space and free space.
I wll check like if sy-dbs = u2018Informixu2019
Some code/FM like above to give me used space and free space.
I wll check like if sy-dbs = u2018MaxDBu2019
Some code/FM like above to give me used space and free space.
I need Some DB Table / FM for each DB, which should give me the space details.
Please let me know.

Careful here Pradeep, this is not valid syntax.
status = case endtime
when null then "error"
when not null then "successfull"
endYou want:
SQL> select case
2            when endtime is null then 'error'
3            when endtime is not null then 'successful'
4         end
5 from t;
CASEWHENEN
error
(and you don't really need both conditions since they are mutually exclusive)

0xC00D36C4 MF_MEDIA_ENGINE_ERR_SRC_NOT_SUPPORTED for AVI that should work

Similar Messages

Maybe you are looking for