10.4.11 update - restart problem

Hi everyone,
Sorry if someone else has posted this, but I couldn't find a similar problem on the forum.
Since updating a few days ago, my mac no longer stays permanently shutdown, but restarts itself around 30min after shutdown.
I have run the combo update, verified disk (no problems), verified and repaired permissions, checked all the energy saver preferences were correct etc., but the problem is still occurring.
Can anyone advise what might be done to remedy this?
Thanks very much.
Mike

i just installed the update 10.4.11. i don't have a restart problem but now these applications wont start:
mail
itunes
ichat
safari
apple/software update
i try from the dock, from the apps folder, nothing. they bounce once and thats it.
please help!
just found this is the crash report log:
Command: Mail
Path: /Applications/Mail.app/Contents/MacOS/Mail
Parent: WindowServer [65]
Version: 2.1.1 (752.3)
PID: 399
Thread: Unknown
Link (dyld) error:
Library not loaded: /usr/lib/libgcc_s.1*dylib
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Reason: image not found
and:
Command: Safari
Path: /Applications/Safari.app/Contents/MacOS/Safari
Parent: WindowServer [65]
Version: 3.0.4 (523.12)
PID: 388
Thread: Unknown
Link (dyld) error:
Library not loaded: /usr/lib/libgcc_s.1*dylib
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Reason: image not found
Message was edited by: skrauntor

Similar Messages

HT1222 Will this update hjelp the periodic restart problem on iPhone 4S

Will IOS6.1 update improve the restart problem that occurs with iPhone 4s?

I tried all of the suggested solutions mentioned in this thread, and finally did a full reset according to Apple's instructions, step by step (as an engineer and 40 year computer user I am good at that stuff).
Sorry to say after the several hour process, not one of the problems I have experienced have been solved.
IPad 2 is still running slow and choppy.
Some Apps do not even load.
Website pages will not load and result in error messages. One particularly annoying Safari error on loading a new web page is: "a problem occurred with this webpage so it was reloaded".
MY iPad 2 worked perfectly for the last couple of years through several updates that performed seamlessly, but this one and the two most recent corrected updates have rendered my iPad so degraded that I don't think I will be using it much anymore. I originally bought the tablet because of it's smooth GUI and fast performance, the reliability and error free environment, and Apple's proven record for effective updates. That's all gone now.

I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message!

I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message and the computer wont restart!

What is a error message and what do you see when it appears?
Haven't much problem with Airs around here, since they have a SSD they tend to be more reliable.
Perhaps it was a bad update, have you ran through this list of possible fixes?
Do as many as possible, starting with #1. Until the problem is resolved.
Use the boot 10.6 USB instead of the disk of course.
Step by Step to fix your Mac

Bold 9930 restarting problem

hi,
Inspite of updating the device software several times the restarting problem still prevails.
Kindly advise,
Regards
Sunny

Hi sunny3788
If even after updating your device software your device is still having the same problem then can you confirm a few things like how many third party application you are having on your device, or are you still having any of those third party application that you are having before this update? If it is then I prefer Uninstall all those applications to see it reboot stops.
If problem disappear then install one application at a time to see which application is responsible .Also as you mentioned on your previous thread that you brought your device recently so I think your device is still under warranty and you can approach your carrier because it might be an hardware issue.And in that situation you can ask for a replacement.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

IOS 8.0.2 update causing problems with wifi connectivity..please help

latest update having problems ...please help..!!!!!!!!!!

Just a quick snapshot of my chain of events. I’m currently on my fourth iPhone 6 Plus 64GB here in London, UK. Every time I have spoken to AppleCare and told them that I have gone through all the Wi-Fi troubleshooting methods possible they have asked me to get a brand new retail replacement as I’m within my 14 day return period. I’ve been experiencing the following issues:
Wi-Fi disconnects and switches to 4G (Restart required for temp fix)
Wi-Fi is still active but there is no traffic or activity– often when in sleep mode for long periods of time. (Toggle Wi-Fi on/off for temp fix)
Wi-Fi disconnects and cannot find any networks (restart required for temp fix)
This has been occurring on both iOS 8 and 8.0.2
The issues are the same on both my 2.4Ghz and 5Ghz networks
This is affecting my ip6+ and 5s (5s used to work perfect on ios7 on same networks) – My MBP-R and all other devices run perfectly on my network.
I spoke to AppleCare again yesterday and asked for their advice as its now my fourth iPhone in just under a month. This time they said that apple were fully aware of the Wi-Fi problem and that new repair tickets were not being raised for their engineers as they are already working hard to get this resolved. They also said they could see all the issues raised on the apple discussions boards which they usually don’t admit too! I asked what to do next and the advisor apologised and said this is clearly a software glitch and will be resolved in the next update. I asked for a timescale but unfortunately none was given.
As stated above I have tried all the troubleshooting methods discussed on forums and on tech websites but the only thing that gives me a stable connection without any disconnects (especially on my 6 plus) is turning cellular/mobile data off when I know I’m going to be on Wi-Fi for a sustained period of time (e.g. at home or work). I appreciate this is annoying but it’s the best temp fix until an update comes out.
Hope it helps everyone who is having issues with their devices that have cellular functionality.
Any comments welcome

HT1199 I have a 3.2 GHz Intel Core i3, 27 inch, Mid 2010. It used to run fast but now it seems to have slowed down like when surfing or opening applications. I downloaded all the updates restarted but it seem slow. How do I speed it up? Thanks

I have a 3.2 GHz Intel Core i3, 27 inch, Mid 2010. It used to run fast but now it seems to have slowed down like when surfing or opening applications. I downloaded all the updates restarted but it still seem slow. How do I speed it up? Thanks - ManongCA

Activity Monitor – Monitor Performance Problems
Why is my computer slow
Why your Mac runs slower than it should
Things you can do to resolve slowdowns see post by Kappy

K7N2G-ILSR MS-6570 Restart Problems!

K7N2G-ILSR MS-6570 Restart Problems!
Has anybody else had a problem like this . . .
Ive got this problem with two machines now!!!!
Say for example you boot your machine and go into the bios to change whatever. Then save and exit. It should reboot and carry on to go into windows (or whatever). BUT . . . both of my machines restart and then just sit there and give a long beep which then repeats.
If I turn the machine off completely then back on it starts up ok with any changes to the bios kept from last time.
Can anybody help?!?!??! ;(
I have updated to the latest bios (which is 7.2)

I now have the MSI K7N2 Delta-ILSR (601-6570-030).;
On the box:- NVIDIA nForce 2 Ultra 400 Chipset Based.
K7,nFORCE2 Ultra400/SPP,MCP2-T,FSB400,D-Bracket2,Round cable,2*SATA&power cables,1394 cable,S-Bracket,WinDVD4.
I have 2x256 PC3200 Corsair DDR and a XP2800 Barton, tried and tested at 240fsb(237fsb Totally stable), And I get the same thing happening to me..Also this board and the last one will NOT do the claimed 400fsb..
And dont say it's the ram because it's not, the ram and CPU are fine.... It's the Motherboard that is incompatable with the Ram & CPU
why because my Ram is Corsair(the name speaks for itself) and works in every system to date!.. The CPU is AMD also works in every system to date!
Soon as i get around 193+(fsb) it starts to do the same thing wont reboot, and does the beep thing! at 200x7 200x7.5 200x8 200x8.5 200x9 200x9.5 200x10 200x10.5 200x11 200x11.5= NOTHING NOTHING NOTHING NOTHING NOTHING NOTHING NOTHING NOTHING but BEEP ......BEEP.......BEEP.
I also bought a brand new Antec TRUEPower550Watt with front voltage control (£100+) and that still does,nt do it
this is my second board, and im totaly fed up with there crap board. I spent good money for this TOP Class Ram and dont expect to be told the Rams wrong when it works in every other system i have had my hands on!!!!!!!
MY advice is send it back and get an other and if thats no use send it back again and get a refund and buy an ABIT NF7-S.. with exactly the same components i get a fsb of anything(100) upto 240fsb abit..
SIG is old board

MSI 865PE Neo Series Restart Problem

Hello,
I have a problem on my MSI 865PE Neo Series Mobo when i restart my system using windows or by pressing ctrl+alt+del my pc won't restart and stay there forever on a black screen but when i press my reset button it will restart normally this is my one and only problem regarding this mobo... pls any help here. fix or any tips and suggestions...
(*by the way this is just my friends computer and im the one who builds it and maintain it...)
System Specs Of My Friend's PC:
MSI 865PE Neo Series Intel P4 Motherboard w/ HT Technology Support
Intel P4 @ 3GHz/800MHz FSB HT Technology
512MB DDR400
MSI NVIDIA GeForce FX 5700 @ 256MB DDR
550W PSU 12A-30

no guyz im using Windows XP Pro SP1 and its not a OS problem because the first time i boot the system i have no OS yet and then i press ctrl+alt+del then my system wont restart at all even in windows ive updated all drivers and mobo bios and increasing DDR Voltage to 2.8v and disabling HT has no changed at all any help would be appreciated... i think this is some problem with MSI mobo power management that it can't match ur psu so well unlike ASUS and GIGABYTE mobo runs perfectly fine. by the way its not my pc its my friend's pc and im the one who builds and hope to fix this one and only problem... everything else is ok except for the Restart Problem!!!!
My System Spec:
GIGABYTE GA-8INXP Intel E7205 Chipset P4 MB
Intel P4 @ 3GHz/500MHz FSB
1GB Dual Channel DDR266
ASUS ATI Radeon X800XT @ 256MB GDDRIII/AGP8x
Seagate 80GB SATA HDD
Maxtor 80GB IDE RAID HDD
Microsoft Windows XP Professional Edition @ Service Pack 2 RC1 (fully updated)
My Friend's Spec:
MSI 865PE Neo Series P4 MB
Intel P4 @ 3GHz/800MB FSB
512MB DDR400 CL2.5
MSI NVIDIA GeForce FX 5700 @ 256MB DDR/AGP8x
80GB IDE HDD (x2)
Microsoft Windows XP Professional Edition @ Service Pack 1 (fully updated)
*this is not a windows problem motherboard power management or bios settings bug here..
*its my first time to handle a MSI Motherboard
*and if any guyz out there need help regarding other problems or any problems in ur pc pm me in ym @ [email protected]

Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

10.4.11 combo update install problem

Has anyone else had trouble installing the combo update from 10.4 to 10.4.11?? Mine almost finishes and says it encounters an unknown error and cannot finish the install. Says it moves the update to trash and says try again from the finder...
HELP!!

Updating
Certain steps appear to minimize the risk of an update producing problems.
Number one is to make sure you have a bootable clone backup of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
You can also go to the step of booting into safe mode to do the install.
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
Repair permissions again afterward.
It helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
Almost all of the above steps (except backup) have been questioned (e.g., [Permissons repair|http://www.macworld.com/article/52220-3/2006/08/repairpermissions.html] as to necessity. Probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe?
[BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
[Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]
[Klaus1's post on updating and removing updates|http://discussions.apple.com/message.jspa?messageID=10257902] and [another one|http://discussions.apple.com/message.jspa?messageID=10402175]

K7N2G-L restart problem

Hi
If I do a cold start my system will boot up ok,but if I have to do a "restart" after installing something it boots up and the gets to the part where it says "Searching for IDE devices" and it will hang.If I power off and then on again it will boot up normaly.Apart from that it runs well...any ideas ?(
Athlon xp 1800+

Running The K7N2G-ILSR
Antec Case, with 360 Watt power Supply.
Dual SATA Raptor 37.5 Gig WD Drives Raided
Dual WD 80 Gig 7200 RPM Drives
Single Maxtor 120 Gig 7200 RPM Drive
52x24x52x CDRW
16X DVD Rom Drive
Athlon XP2500+ Barton Core CPU w/Full Copper Heat Sink
dual 512meg DDR 333 in slots 1 and 3
Radeon 9700 Pro 8x AGO 128 Meg Video Card
4 80mm Cooling Fans Throughout the case.
CPU Temp runs on average between 50c - 60c
Case Temp runs on average about 89f - 100f
When I set this thing up I had a 300 Watt supply and it did not fully run things and did have some problems with the HD lights staying on, my guess was due to not enough power. So beefing it up to 360 Watts fixed that.
Also had restart problems quite often, at least 3 or 4 times a day it would just reboot on its own, I run and operate a computer store , so I had the ability to try different things to fix this. Turns out the memory on the nForce chipset boards is VERY important. Brand new sticks from a variety of sources had different affects, including not counting all the memory properly, restarting randomly and not booting at all. Believe it or not, one of the cheapest memory makers on the market seems to have been the best for use in the machine and that would be the Kingston Value Ram. So, if at all possible try getting some of them and see what happens. The worst??? All Components Memory.
You guys should also look at the 4 lights that are or should be in the back of your machine provided by MSI for your troubleshooting aids.. They do work and are quite helpful.
Sorry for the lengthy message post, but thought maybe I could be of some help to somebody.

TS1702 Cannot get iPhone 4 to talk with Mac Lion using Numpad. Have updated, restarted etc. Have Screen Sharing on. It sees my computer but when I press keys on the NumPad there is no response. I have tried it on the Calculator and on Sibelius. Any clues?

Cannot get iPhone 4 to talk with Mac Lion using Numpad. Have updated, restarted etc. Have Screen Sharing on. It sees my computer but when I press keys on the NumPad there is no response. I have tried it on the Calculator and on Sibelius. Any clues??

Here's how to do it.
1. App Store, iTunes Store should have the same AppleID on Computer and iPhones. (Free to share apps, music and books... )
2. Person A uses the same purchasing account for everything (ie. email, contacts and ...).
3. Person B have the same purchase account see no. 1 (for App Store and iTunes Store) but create a second AppleID for iCal, e-mail, contacts and etc.

SQL Server 2005 Update mechanism problem

Hi Gurus,
      We're faced with one SQL Server 2005 update mechanism problem. Here is my problem:
      According to our requirement, an add_on interface program is designed to execute creation of production order by calling Bapi.
      There are 3 steps in this add_on program:
      Step 1: Create production order
      Step 2: Change the information of production.
      Step 3: Some other
      After the step 1 has finished immediately step 2 is called, Howerver the information which should have inserted into database table couldn't be found from database. (Maybe because the time between two steps is too short to finish inserting)
      In order to ensure the complete of the transaction, before the step 2 executed, the information in step 1 should have inserted into database.
       Is there any solution to solve this problem?
       I guess whether there is any parameter which control the time of writing buffer into database...
Any advice is appreciated.
Thanks & Best Regards,
Derek Yang

Hi
I have the same problem, but that post didnt help me
This is the error I have:
My snapshot agent hangs.. waiting for a response from the server.. and timeouts.
This only hapens for a publication that has a filter based on HOSTNAME()
The other publications work fine
Error messages:
Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Command Text: sp_MSsetup_partition_groups
Parameters: @publication = XXXXXXX
Stack: at Microsoft.SqlServer.Replication.AgentCore.ReMapSqlException(SqlException e, SqlCommand command)
at Microsoft.SqlServer.Replication.AgentCore.AgentExecuteNonQuery(SqlCommand command, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.SetupPartitionGroups()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoRegularMergeSnapshotPreparations()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoPreArticleFilesGenerationProcessing()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: -2)
Get help: http://help/-2
Server XXXXXXXXX, Level 11, State 0, Procedure , Line 0
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Source: MSSQLServer, Error number: -2)
Get help: http://help/-2

Update/Insert Problem with Oracle Warehouse Builder

Hello,
i have update/insert problem with owb.
Situation: I have a source-table called s_account and a target table called w_account_d. In the target table are already data which was filled trough the source table inserts. Now anyone make changes on data on the target table. This changes should now give further on the source table with an update operation. But exactly here is the problem i can´t map back the data to source because that will create a loop.
My idea was to set a trigger but i can´t find this component in owb or is anywhere hidden?
Also i have already seen properties as CDC or conditonal loading in the property inspector of the table, but i have no idea how it works.
Give it other possibilities to modeling this case? or can anyone me explain how i can implement this eventually with CDC?
I look forward for your replies :)

Hi
thanks for your answer. I follow your suggestion and have set the constraints of both tables into the database directly.Nevertheless it doesn´t work to begin. In the next step i found by right click on a table the listpoint "configure" - I goes to "unique key" --> creation method and set here follow options: Constraint State = ENABLE, Constraint Validation = Validate. That error message that appears before by the deployment disappears yet. Now i start the job to test if the insert/update process works right. Finally it seems to work - but not really.
My Testscenario
1. Load the data from source table about the staging area to data warehouse table: Check - it works!
2. Change one data record in source table
3. Load the source table with changed data record once again to staging area: Check - it works!
4. Load new staging area table with the changed data record to data warehouse table: Check it works! BUT, BUT i can not recognize if it is insert or update operation, then under the design window by jobs execution windows is reported "rows selected 98", Rows inserted" is empty and "rows updated" is empty. So i think works not correct, then my opinion if it works correct it should show be "rows updated" 1.
What can yet now still be wrong or forgotten? Any ideas?
*By the way think not 98 rows there is not important if you make an update or insert which performance. It is an example table the right tables have million of records.*
I look forward for your answers :)

Tried to buy Aperture 3 and got an error message Aperture can't be installed on "Macintosh HD" because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update. Problem is, I had already updated my IMac to Lion OS

Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update. Problem is, I had already updated my IMac to Lion OS

iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)

10.4.11 update - restart problem

Similar Messages

Maybe you are looking for