10.5 iCal Server User having invite issues and 403 errors.

I have a 10.5 iCal server running. One user has constant problems. I've made a new account and the issue persists. A lot of 403 errors. People can't always invite him. He can't always invite others. Most invitees show up with "!" by their names. The log is showing that his folder in the CalendarServer can't be found (though sometimes it is) and that he is not enabled in the Calendar SACL, though the main group he belongs to is enabled.
Thoughts and suggestions are appreciated.

No solution, gave the 10.5 user an Intel Mac running Snow Leopard.

Similar Messages

ICal Server external Email Invitations Not working for names with umlauts!!

Hi,
I was testing external email invitations with iCal Server on Lion Server and encountered that if a Name that can Be resolved via iPhone or mac addressbook or even the sending iCal Account contains an umlaut something like this show up in iCal Server error log:
2011-09-26 17:01:18+0200 [-] [mailgateway] 2011-09-26 17:01:18+0200 [-] [twext.web2.server#error] [Failure instance: Traceback: <type 'exceptions.UnicodeDecodeError'>: 'ascii' codec can't decode byte 0xc3 in position 90: ordinal not in range(128)
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/internet/defer.py:388:errback
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/internet/defer.py:455:_startRunCallbacks
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/internet/defer.py:542:_runCallbacks
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/internet/defer.py:1076:gotResult
2011-09-26 17:01:18+0200 [-] [mailgateway]      --- <exception caught here> ---
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/internet/defer.py:1018:_inlineCallbacks
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/python/failure.py:350:throwExceptionIntoGenerator
2011-09-26 17:01:18+0200 [-] [mailgateway]      /usr/share/caldavd/lib/python/twistedcaldav/resource.py:310:renderHTTP
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/internet/defer.py:1018:_inlineCallbacks
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/python/failure.py:350:throwExceptionIntoGenerator
2011-09-26 17:01:18+0200 [-] [mailgateway]      /usr/share/caldavd/lib/python/twext/web2/static.py:127:renderHTTP
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/internet/defer.py:1018:_inlineCallbacks
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/python/failure.py:350:throwExceptionIntoGenerator
2011-09-26 17:01:18+0200 [-] [mailgateway]      /usr/share/caldavd/lib/python/twext/web2/resource.py:109:renderHTTP
2011-09-26 17:01:18+0200 [-] [mailgateway]      /System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python /twisted/internet/defer.py:1020:_inlineCallbacks
2011-09-26 17:01:18+0200 [-] [mailgateway]      /usr/share/caldavd/lib/python/twistedcaldav/mail.py:334:http_POST
2011-09-26 17:01:18+0200 [-] [mailgateway]      /usr/share/caldavd/lib/python/twistedcaldav/mail.py:958:outbound
2011-09-26 17:01:18+0200 [-] [mailgateway]      /usr/share/caldavd/lib/python/twistedcaldav/mail.py:1199:generateEmail
2011-09-26 17:01:18+0200 [-] [mailgateway]      ]
2011-09-26 17:01:18+0200 [-] [caldav-1] [AuthorizedHTTPGetter,client] [twistedcaldav.scheduling.imip#error] Could not do server-to-imip request : <twistedcaldav.scheduling.imip.ScheduleViaIMip object at 0x103c65ed0> 500 Internal Server Error
2011-09-26 17:01:18+0200 [-] [caldav-1] [AuthorizedHTTPGetter,client] [twistedcaldav.scheduling.scheduler.ScheduleResponseQueue#error] Error during PUT for mailto:someemailaddress@yourdomain: iMIP request failed
And No Email is send!
If changing the Umlaut ü to something like ue in the Sender or Receiver Name everything is alright!
Thank you Apple for obviously Not testing Lion Server for international use :-/
Maybe this help someone else who is using umlauts with iCal Server external Email invitations
Regards
Eldrik

Hello Daryn,
Thinks for commenting. I am very upset that Apple just said "No" when I asked for this to be fixed. There appears to be no way to submit this as an official bug that keeps ical from running.
Apple actually had me reinstall my whole server and the issue was still there and then they just said "Oh, well I will email someone about it.".
This is the first time Apple has stunk it up in my books. This is bad support for Server.
Brad

My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset

My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset. It was working fine until I went to activate it and update the PRL. It turns on, but Freezes on the LG Logo. it currently goes into the LG Download Mode, and When I restore with LG's Mobile Support Tool, It finishes, reboots, and stays at the boot Logo. I was wondering if I can possibly get a replacement phone? This is a little upsetting, as i was hoping to have it transfered from prepaid to postpaid service next month

Who is your Internet Service Provider...?
Do you have any computer which is able to go online wirelessly...?
Have you forwarded any ports on the router...?
Try to adjust the wireless settings on the router and check...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Wireless tab,Change the SSIS(Network Name) to some unique name.Change the Channel Width to 20MHz only and Channel to 11,click on save settings.Under the Wireless Security subtab,Change the Security to WEP and type any ten digit number in key1 as the network security key,click on save settings..Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Also,for the gaming system,check this link.

Can I exchange for a new laptop? Since December it has been having hardware issues and it has already needed to get parts changed twice already. My laptop is not working properly again. I feel like I have unfortunately gotten a lemon laptop.

Can I exchange for a new laptop? Since December it has been having hardware issues and it has already needed to get parts changed twice already. My laptop is not working properly again. I feel like I have unfortunately gotten a lemon laptop.

Apple will repair or replace at its discretions, parts found to be defective in materials or workmanship.
You will have to discuss whether your history warrants a complete replacement with the folks at the Genius Bar.
I do not speak for Apple, but it sounds to me like you have been unlucky, but not unlucky enough (or have spent so much time with your MacBook in the shop) to warrant a complete replacement.
You have not provided any details of what the faults were or what was replaced. If they replaced the motherboard, you already got a new computer -- because everything except the drive and the display is on that board.

Can non Managed users be iCal server users?

Currently we've had moderate to good success with our test runs or iCal server. One item I'm not in love with however, is that inorder for someone to have an iCal user account and set up iCal on their machine, I first have to enable and set up Open directory. The down side to this is that it then makes them a "Managed User" meaning that there password and login is defined by the server.
We'd like to be able to add people into the mix, without having them be a managed user, and especially without forcing their computer login password and iCal and or server password to be the same.
Thanks in advance for any tips on this,
Greg Montgomery

So having the machine bound to the server isn't such a problem, although if it can be done for some users sans that I'd be interested in learning how.
The bigger problem is that the users are forced to change their passwords/logins on their machine to match the password on the server.
For the most part that is OK, but we have a few users who have their own laptops, and don't like having us control their login.
Greg

ICal Server - User can log in from iPhone but not from Desktop Mac

I've got quite the peculiar problem with iCal Server on OS X 10.6.6 - my users can log in and access the shared calendars using their iPhones. When I set up an the same account on their desktop Macs in iCal, I get an error message "The server did not recognize your user name or password for account <username@servername>".
I'm positive that username and password are correct. The only thing I found about that in the log files was that the CalDAV server returns a 201 HTTP status code when accessing the account from the iPhone vs. a 407 status code when using iCal on their desktop Mac. The same accounts are used for Email, File Sharing and Address book, all of which run fine.
Has anyone experienced a similar problem? Maybe even solved it?

Solved it myself - there was a non-ASCII character in the account password. Strange that the iPhone didn't have a problem with that while iCal did. Now that I've changed the password to contain only ASCII characters, the problem is gone.

ICal Server: logs showing "Too many matching components" errors

Setup:
     MacMini3,1 (Core2Duo) running OS X 10.6.8 Server
Services Enabled:
     AFP
     iCal
     NetBoot
     Open Directory
     Push Notifications
     SMB
     Web
iCal Server:
     About 100 users in OpenDirectory, but the only thing OD is used for is to provide iCal accounts. Our iCal clients are split evenly among native iCal client users, Thunderbird/Lightning users, and those who access via http. One thing that may be worth mentioning is the way we use this calendar: Management has decided that they want one calendar user who gets invited to nearly every **** event that anyone schedules, an "overview" so that everyone can add this user as a read-only delegate, and then they can see what everyone at the company is up to at a glance. So this has created one gigantic iCal account with perhaps 15 events per-day every-day for the last 3 years - and all 100 users have read access to these events.
The Problem: error.log is full of messages like this:
2012-01-06 14:32:16+0100 [-] [caldav-8010] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:32:18+0100 [-] [caldav-8011] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:32:40+0100 [-] [caldav-8012] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:32:43+0100 [-] [caldav-8010] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:37:15+0100 [-] [caldav-8012] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:37:18+0100 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:37:41+0100 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:37:44+0100 [-] [caldav-8011] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:42:17+0100 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:42:18+0100 [-] [caldav-8012] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:42:51+0100 [-] [caldav-8011] [PooledMemCacheProtocol,client] [twistedcaldav.directory.appleopendirectory.OpenDirectoryRecord#error] OpenDirectory (node=/Search) error while performing digest authentication for user bob: ('DirectoryServices Error: Exception raised in file src/CDirectoryService.cpp at line 1078', -14002)
2012-01-06 14:42:52+0100 [-] [caldav-8010] [PooledMemCacheProtocol,client] [twistedcaldav.directory.appleopendirectory.OpenDirectoryRecord#error] OpenDirectory (node=/Search) error while performing digest authentication for user bob: ('DirectoryServices Error: Exception raised in file src/CDirectoryService.cpp at line 1078', -14002)
2012-01-06 14:42:52+0100 [-] [caldav-8011] [PooledMemCacheProtocol,client] [twistedcaldav.directory.appleopendirectory.OpenDirectoryRecord#error] OpenDirectory (node=/Search) error while performing digest authentication for user bob: ('DirectoryServices Error: Exception raised in file src/CDirectoryService.cpp at line 1078', -14002)
2012-01-06 14:47:21+0100 [-] [caldav-8010] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:47:22+0100 [-] [caldav-8012] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:47:44+0100 [-] [caldav-8012] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:47:48+0100 [-] [caldav-8010] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
2012-01-06 14:47:50+0100 [-] [caldav-8011] [PooledMemCacheProtocol,client] [twistedcaldav.method.report_calquery#error] Too many matching components in calendar-query report
I've not be able to find any documentation on this error in my google searches... Does anyone have experience with this error, or a possible solution?
Thanks!

rajeshappsdba wrote:
Hi,
we have EBusiness suite 11.5.10.2 Solaris 5.10 Production server. Until last 3 week (for the past 1.5 years), there were max 10 archive log generation (archive size like 250mb) now which has been increased to 200 kb,152kb,1mb archives for every 1 MIN.
I am unable to understand this behaviour. The number of users still remain the same and the usage is as usual.
Is there a way I can check what has gone wrong? I could not see any errors also in the alert.log
Please suggest what can be done.
Thanks
Rajeshredo generation is the result of the activity on the system. You've therefore either started doing much more work - which the business users might well be able to let you know about - or you've started doing you existing workload extremely inefficently, which your business users will probably have noticed. I would start in this case, not with logminer, but with the business and the application - ebusiness suite for example keeps pretty good logs of what activity has happened on the system. Id also be interested in what was changed 3 weeks ago, because something was!
Niall

Help! Having Serious Issues and need to save my data!!!

This is probably going to be a long post, and I apologie in advance, but before I give up completely, I need to see if there's anything that I can do to save the data on my computer. Also, I'm writing this from work and don't have access to the system right now, so I'm going to have to rely on my questionable memory to relay the situation.
Since the battery update was installed, I was having intermittent issues with my MBP battery - when I was fully charged, it only showed about 1:45 of time left (down from a usual 3:00 or so). When it would get down to about 50 minutes left, the system would shut off with no warning. I was about to take the system into the Apple Store to get the battery replaced last week, but just to make sure, I followed the instructions to reset the battery and after that was done, it seemed like the battery was fine (showed up as about 3:00 fully charged). But... the system started working very slowly.
As a result, I decided to try to back up the system (I use SuperDuper and backup to an external USB drive). The backup failed mid-stream and my backup file was now useless (that's the last time I use the erase before backing up option). So now I don't have a backup of my data (all of my data is on that laptop).
I tried running Disk Utility, by booting from the installation DVD, to Repair the disk and it stopped with an invalid node error. I tried again, but no joy. A third time, it appears to have completed. However, now when I boot the system, not only is it really slow, but it boots into some unfamiliar linux prompt ("I don't have a name#:", or something like that.
Since I still think that there was a file system problem, I bought a copy of DiskWarrior 4. However, I don't want to wait for the bootable CD, so I tried to install the OS on the external USB drive so I could run it from there. Everytime I tried to install to the USB drive, I got a kernel panic when the IT Tunes install script was loaded. Every time. I tried removing the second (add-on) RAM stick, removing the battery, etc. No joy. Finally on about the 10th attempt, this time on battery power only (no power cable connected), I managed to get the OS to install on the USB drive.
Okay, so now I can boot to the USB drive. I installed Disk Warrior 4 and ran it on the internal hard drive. Kernel Panic. Every time I've run it (error is about unlocking mutex). Even more frustrated now, I tried to backup the disk again (since all my data is on there, I can't afford to lose any of it). No joy. The backup (using SuperDuper or CloneCopyX) fails at various spots. I have some folders on the drive that I tried to copy off (about 7GB) that contain disk images and the like. That copy failed.
So now, I have un-backupable (is that a word) hard drive that I can't repair without kernel panics (although, now as I write this, I didn't try DW without the power cord). And what I need to know is if anyone can think of anything that I haven't tried to save my user data off of the system before I have to take it in to the Apple Store and potentially lose everything that's on it.
My number 1 concern right now is losing the data on the drive.
Can anyone help me at all?
Again, sorry for the long post...
Thanks!
Jim
17" MacBookPro Mac OS X (10.4.9) 2GB RAM, 120GB HD, Glossy Screen

You may not have the luxury of having another Mac but you must know someone who does. You need to boot your Mac into target disk mode. This is going to be your best bet as far as saving your files. Keep in mind that everytime you mess with this computer you are further endangering your data. Also, once your Mac is booted as a target disk, it may be possible to mount it on a windoze computer just to copy your files to another drive. I used to have one here and if i still did I would try this for you but I "offed" it in favor on running windoze (Parallels) on my MBP. But, one way or another, you need to get next to another computer.

Leopard Server 10.4 Blogs/Wiki and Safari error with www alias and Log Out

I have a Leopard Server 10.5 setup with dns and web services including blogs and wikis setup. If I browse to http://hostname.domain.com/users using Safari 5.0.1, I see that the session is not logged in (i.e. Log Out is not visible. I can login and create a blog and logout with no issue. I can do this on Firefox and Camino as well.
Now, if I browse to http://www.domain.com/users however... the Log Out button is visible all the time in Safari 5.0.1 only - Firefox and Camino show the correct status of a non logged in session. In Safari 5.0.1 it is not possible to login to post or create a blog WHEN the www.domain.com url is used.
I have rebuilt Leopard server twice on a physical and a virtual machine for testing and can reproduce the exact same error. It's a mix of using www.domain.com and Safari. Any other browser works fine and ALL browsers work fine with any other alias pointing to the same site, including hostname.domain.com
Testing on Safari 5.0.1 on the server itself works fine. Testing on clients was on 10.6 and 10.5 and was performed on 4 separate client machines. Browsing on the server was fine but browsing on any client would produce the error when using www.domain.com.
If anyone can offer any suggestions, please help!

I tried several new approaches, but nothing worked so far.
The update to 10.5.5 made things worse. Connections are dropping all over the place, when saving from Adobe programs in particular.
Printing from clients to a Xerox Phaser 5500 works, but choosing a different paper size than the default chosen in the cups admin interface goes all wrong and either prints on the default paper size, but down/upscaled to the chosen paper size or prints on the chosen paper size and down/upscaled as if you were printing to the default paper size. (e.g. default paper size is A4, you choose A3 with an A3 document. Document prints on A4 and is downscaled to A4, or prints on A3 and is downscaled to A4.)
There is no way I can keep this thing in production much longer. I tried reinstalling again, but that did not change any behaviour. Another nice "feature": InDesign disables "edit original" when the path to the linked file contains any directoryname with more than 8 characters in length.
Coupled with a sometimes disappearing "dirserv" (it just stops working until I reboot the whole computer) the decision stands to move away from the Xserve.
Leopard Server 10.5.x just does not seem to work well with windows clients.
We will migrate to a windows server 2003 running ExtremZ-IP for the macintosh clients this weekend. Too bad that Apple does not allow Bootcamp to work on Xserves, at least the hardware would have been useful then.
(As a nice finishing touch, the harddisk partition where all data resides did become corrupt over the weekend. "The volume Daten could not be repaired."
Disk Utility and first aid did show nothing on friday ... saturday after no work being done on the partition this error shows up. The only solution I could find was to reformat the partition and restore from a previous backup. Another weekend down the drain. Sorry for the rant, but 6 weekends in a row is enough.)

Intermittent speed issues and high errors after ma...

I had BT broadband installed 3rd August and was only getting 3.5 - 4.5 mbps (stable and consistent) despite having been quoted 6 to 14 mbps when I ordered.
After the standard call center checks BT eventually agreed to send out an engineer (4 days ago) who replaced the master socket with a new style one and the speed reported by my HH3 went from 4.5 to 8.5mbps... all looked good however since then the actual download speed has varied from 1.5 to 8.5 mbps and the error counts seem very high.
Latency has also switched from interleaved to fast and now back to interleave.
Any advice on how to get this stable would be much appreciated - thanks in advance!
Connection Information
Line state:
Connected
Connection time:
1 days, 11:30:30
Downstream:
8.768 Mbps
Upstream:
1.114 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
Unknown or no mode configured
Latency type:
Interleaved
Noise margin (Down/Up):
6.3 dB / 6.5 dB
Line attenuation (Down/Up):
32.1 dB / 17.5 dB
Output power (Down/Up):
20.4 dBm / 12.4 dBm
FEC Events (Down/Up):
182027426 / 534
CRC Events (Down/Up):
88180 / 138
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
209251 / 307
Error Seconds (Local/Remote):
31526 / 222
FAQ
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
3954 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 3954 Kbps
For your connection, the acceptable range of speeds is 2000-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8977 Kbps(DOWN-STREAM), 1139 Kbps(UP-STREAM)
IP Profile for your line is - 7920 Kbps
2. Upstream Test: -provides background information.
Upload Speed
874 Kbps
0 Kbps
1139 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 874 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1139 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

Another set of mixed results this evening:
speedtester.bt reporting a max of 21meg and homehub is now reporting 9.21.
Can you please advise what speed you would expect based on my distance from exchange? My noise margin has gone from 5.1 yesterday to 8.3 today.
Connection Information
Line state:
Connected
Connection time:
0 days, 10:54:17
Downstream:
9.21 Mbps
Upstream:
1.098 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
8.3 dB / 5.7 dB
Line attenuation (Down/Up):
32.1 dB / 17.4 dB
Output power (Down/Up):
20.5 dBm / 12.7 dBm
FEC Events (Down/Up):
4092978 / 2283
CRC Events (Down/Up):
156 / 293
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
294 / 882
Error Seconds (Local/Remote):
172 / 88
FAQ
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
7289 Kbps
0 Kbps
21000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 7289 Kbps
For your connection, the acceptable range of speeds is 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :9430 Kbps(DOWN-STREAM), 1123 Kbps(UP-STREAM)
IP Profile for your line is - 8319 Kbps
2. Upstream Test: -provides background information.
Upload Speed
879 Kbps
0 Kbps
1123 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 879 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1123 Kbps

Intune: No licenses, user name not recognized and more errors

I've just activated our IUR from our Action Pack subscription.
So, I go an Intune product key for 5 users for 1 year and set it up in the Intune Portal.
So far, so good.
My domain and users from Office365 have automatically transferred to Intune as well, so that's great.
However, it seems the licenses won't activate or something.
When I look at Subscription > Manage (or something like that, it's Dutch), it says 5 licenses until Aprl 2nd 2016.
However, in Subscription > Licenses it says I don't have any licenses.
Also, when going to any other portal (company or admin), it says 'User Name not recognized'.
My main account is rowdy[A]noord-computers.nl
Is there something more I should do? Or do I just have to wait a few days?
Kind regards,
Rowdy

If you still see this problem, you should contact Microsoft support from the Intune portal.
They can help you fix this problem.
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

MAC (10.6.8) users having permission issues with windows 2003 AD and NetApp SAN environment.

I have created a cifs share that is being accessed by Mac users that are part of a windows 2003 AD. When the user edit data and save it back to the share, the security permission are reset and none of the other users can see the new data unless the permissions are refreshed on the windows server. I have found following links that talk about a similar issue but with an older MAC OS. I am using 10.6.8.
https://discussions.apple.com/thread/1776934?start=0&tstart=0 (Max OS X doesinfluence ACL's on CIFS on 10.5)
http://www.macwindows.com/snowleopard-filesharing.html#033010b(Max OS X 10.6.3 fixes saving issues on CIFS)
Any help will be appreciated.
Thanks,
Manu

This is a 'known problem' as discussed on the MacWindows site, see http://www.macwindows.com/More-on-OS-X-conflicts-with-Windows-Server-Deduplicati on.html
It appears to still affect Mavericks 10.9.5 at least from the lack of any positive reports to the contrary. It is perhaps a bit late but it would have been worth signing up for the public beta of Yosemite and testing that and if needed reporting it as an issue for Yosemite as this will be getting more bug fix attention than Mavericks now.
I would agree turning off de-duplication is not a desirable solution, however other possibilities to consider are installing the standard Samba software on a Mac and using that instead of Apple's SMBx software. This is done by using the SMBup installer See http://eduo.info/2013/07/13/smbup-faq it does not officially list Mavericks but I did see at least one report that it still worked. A second possibility is to install ExtremeZ-IP which installs an AFP server on to your Windows Server and also gives the bonus of supporting Spotlight searches.
Note: You should only try SMBup on a test setup first.

Still having fan issues and kernel task issues

   Hi there, I got a iMac Late 2013 model, 8 GB RAM, 2.7 GHz Intel Core i5, Running Mac OS X 10.10.1. I have had issues in the past with this the Fan running for no reason on this computer. I read numerous articles about this on the web and most said to do a SMC reset and also that certain cables (USB) may cause this. I recently did and SMC, repaired permissions, ran daily/weekly/monthly scripts. Yesterday computer was fine, this morning the fan is going full blast and in activity monitor it says Kernel_task 300+% CPU, CPU time 22:32:14:55. Anyone have any thoughts on this as to why this continues or what I am missing here. Really gets annoying to shut down, SMC restart then good for a day or so. Thanks in advance
        This was originally an old post from a couple months ago and I;m bringing it back to life here as the issue still persists.   Any help is greatly appreciated.

EtreCheck rain after I posted first message
Problem description:
kernel task using up CPU and fan running high
EtreCheck version: 2.1.6 (109)
Report generated January 25, 2015 at 9:05:09 PM CST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Technical Specifications)
iMac - model: iMac14,1
1 2.7 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel Iris Pro
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:48:54
Disk Information: ℹ️
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (727.11 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/VPNAreaChameleon.app
[not loaded] foo.tap (1.0) [Support]
[not loaded] foo.tun (1.0) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.plex.plexconnect.auto.plist [Support]
[running] com.plex.plexconnect.bash.plist [Support]
User Launch Agents: ℹ️
[invalid?] net.tunnelblick.tunnelblick.LaunchAtLogin.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
Plex Media Server Application (/Applications/Plex Media Server.app)
OpenPlex Application (/Applications/OpenPlex.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.287
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 272.23 GB
Destinations:
My Book Thunderbolt Duo [Local]
Total size: 6.00 TB
Total number of backups: 14
Oldest backup: 2014-11-24 05:00:26 +0000
Last backup: 2015-01-10 14:44:33 +0000
Size of backup disk: Excellent
Backup size 6.00 TB > (Disk size 999.35 GB X 3)
Top Processes by CPU: ℹ️
      5% WindowServer
      1% AppleSpell
      0% cloudpaird
Top Processes by Memory: ℹ️
146 MB com.apple.WebKit.WebContent
129 MB mds_stores
77 MB Safari
77 MB Mail
69 MB WindowServer
Virtual Memory Information: ℹ️
4.30 GB Free RAM
2.97 GB Active RAM
516 MB Inactive RAM
807 MB Wired RAM
1.18 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 25, 2015, 08:17:02 PM Self test - passed

Over the weekend i downloaded the new ios6, but since doing so i have had a few conflicts with the apps that are on my ipod touch - is anyone else having any issues and is there a patch, remedy or even anyway of having the other version previous ?

Is anybody else having a few issues since the new IOS6 download for their Ipod Touch ?????

I'm having the exact same problem with Firefox 3.6. I'm running windows Vista 64bit.

Upgraded to yosemite and now having password issues and slow start up

I have upgraded my macbook pro to the OS X Yosemite operating system and now encountering start up and password issues.
Previously on start up my system would go to the log on icon within 10 to 15 seconds of pushing the on button. Now there is horizontal loading indicator bar appearing and takes about 30seconds to 1 minute to go away before getting to the log on screen and if I click on my icon the system goes live on screen without having to put in a password which is an obvious security issue.
I have tried adding a password however each time I try to put my old password in it tells me it is the wrong one.
I am operating Yosemite 10.10.2 on a macbook pro with 8gb memory with i7 processor..
The computer was running perfectly ok before this up grade so I had resisted previous prompts to upgrade due to the bad press this system was getting last year. I thought Apple would have had this all sorted by now??
I would appreciate any help if anyone knows how to resolve these issues.

Install the version of Java they want from here: Java for OS X 2014-001
See if CS 5.1 launches.
If not reinstall CS5.1 and any updates.
Gene

10.5 iCal Server User having invite issues and 403 errors.

Similar Messages

Maybe you are looking for