10.5 to 10.6 Server Upgrade - Apache Fail

Hello,
I did a server upgrade last night from Leopard 10.5 Server to Snow Leopard Server. Everything went surprisingly well aside from one issue I've detected. All my existing services are working with the exception of the Web service. It starts and I get the green light but Apache is not working. In the overview, it says web service has started but no information on Apache version or start time.
Prior to the update I had been running Apache 2.2 so I assumed everything would be happy updating the OS. When the service is off and I click on the Logs tab I see all my old logs, as soon as I start the service everything goes blank so somewhere there is a disconnect with Apache 2.
Any ideas where to start? I cloned the server to another RAID set just in case of failure plus I have my backups, I even tried deleting everything in the Apache2 folder and replacing it with my 10.5 Apache2 contents but still no luck.
A bit baffled.

I like your idea but after doing some research it appears as if the upgrade did not install somethings cause reactivating the system with the default php that ships does not work at all. I would have preferred to do it your way. I did build php ver 5.3.8 and its all working, even the ionCube module but I'm just wresting with a small issue iconv, believed to be a bug. But if I could wipe the slate clean and have everything default I would have, it's just every reference I found pertianing to the factory installation of php were not there.
My only reason for the upgrade to begin with is to support the ionCube module for an OpenRealty installation, other than that server 10.5 was working perfect for me. I would love to have it just work as 10.6 intended and working and stable as you mentioned, just not sure if its possible at this point.
Apache 2.2, PHP 5.3.8, and MYSQL are all working at the moment.
My small issue, loving this apache command,
Syntax error on line 1464 of /private/etc/apache2/httpd.conf: Syntax error on line 8 of /etc/apache2/sites/+entropy-php.conf: Cannot load /usr/local/php5/libphp5.so into server: dlopen(/usr/local/php5/libphp5.so, 10): Library not loaded: /usr/local/php5/lib/libiconv.2.dylib\n  Referenced from: /usr/local/php5/libphp5.so\n  Reason: Incompatible library version: libphp5.so requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0

Similar Messages

  • Action 15.0.0.1 of Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence failed

    Hi
    I try to upgrade a Project Server 2010 environment to 2013. When I run
    upgrade-spprojectwebinstance
    it fails with:
    Action 15.0.0.1 of Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence failed
    Anyone seen this error?
    Thanks

    Hi Xtenser
    try to check the ULS log. There might be a hint, that there is a blocking job in the Project Server Queue. This can block the upgrade process.
    Regards
    Christoph
    Christoph Muelder | Senior Consultant, MCTS, MCSE, MCT | SOLVIN information management GmbH, Germany

  • What to do when SLS - Lion Server Upgrade & Migration Fail

    Hi everyone,
    I've had a tough time over the past week trying to updating my SLS to LS. (It was a slow week at the office so despite the warnings in these discussions I wasn't disturbing anyone, so I thought I'd try...) Both an upgrade to the current running system and a clean install on a wipe of that hard drive stall at the "Configuring Services" "Upgrading services" screen of the set up process. The migration path eventually fails, and as far as I can tell, it seems that the upgrade path just stays there forever.
    Don't worry - I'm doing this all on a Super Duper! clone of my primary drive, so I can go back to SLS whenever I need to.
    BUT, I can tell that the server's status is at least partially okay, even in this stalled setup state - iChat seems to work on various clients, and I can use Server Admin to see stats and services, etc.
    So despite the discomfort of a failed install, part of me feels like I'll be fine with the LS if I can just figure out how to move my old data into the right places for the new system to use it. But I can't find any guidance for that. I'm looking to migrate OD (seems to have migrated fine), iCal, iChat, Address Book, Wikis, Time Machine, and File Sharing (which should be trivial to set up, I reckon).
    Can anyone point me in the right direction?
    Thanks very much,
    Willhaus

    Okay, so I've had some marginal success.
    After leaving the hung install for a ridiculous amount of time (24+ hours), I realized that I could click the help button, and from the help window click the "further info about Lion Server" link to launch Safari. That gave me access to Software Update from the Apple menu, which then let me install the latest Safari update which conveniently enough requires a restart.
    After restart, the Server Migration Assistant kicked in again, but failed quickly in the upgrading services stage. Another restart, and the sever finally booted more or less normally.
    The strange thing was that although chat services worked fine during the hung install, all OD-related services stopped working after restarting. Turns out there were no users or groups in OD. Importing them from an OD archive, though, restored them.
    So now iChat works great (even the old chat longs migrated successfully), and AFP is properly sharing our volumes across our studio's network. So our server is limping along.
    The other services we need that aren't up yet are Wiki and iCal. Some info about those:
    Wiki: administrators can log in and see all wikis just fine. That's awesome because it means the data migrated successfully. Any non-admin users can log in, but are then get a wiki-styled page that says simply "No wikis found". It's as if they don't have permissions to see the wikis, even though in Server.app they belong to the groups that the wikis are associated with. I've tried removing and re-adding users to groups, but that doesn't seem to do it. Any ideas how to fix this?
    Calendar: While I can't get this to work, it's not like it's completely lifeless. An account in a client Lion iCal configured with the proper Lion settings returns an error that reads:
    "The Server is Busy or Unavailable.
    "The server at myserver.com is currently unable to handle the connection for account “ Calendars” due to a temporary overloading or maintenance of the server. If this continues you should contact the server administrator.
    "You may try to connect to the server again or take the account offline."
    As a logged in administrator, in a wiki clicking on Calendar in the nab bar goes to the calendar style page with an unending dialogue box that reads "Getting events from server". And clicking on Calendar from Home page footer takes me to the URL https://myserver.com/webcal with an error that says:
    "Service Temporarily Unavailable
    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
    Apache/2.2.20 (Unix) mod_ssl/2.2.20 OpenSSL/0.9.8r DAV/2 Server at myserver.com Port 443"
    Again, at least I'm confident that the data migrated properly -  I can find all the calendar data in it's proper new location - but either the service won't start or something's not configured correctly. I've tried chaining the hostname and restarting the service about a billion times. I've got no idea what to try next. Any ideas?
    Thank you so much,
    Willhaus

  • SahrePoint Server -Upgrade Status Failed

    Hi,
    On our SharePoint server 2010, I noticed that there are 2 Failed upgrade. ( Central Admin > Upgrade Status)
    Could you please let me know what are the steps to fix it?
    Thanks, 
    Kate

    Thanks Jason,
    I'm new in the company and don't know the history of how the upgrade has been done.
    The reason I'm researching is, there is a problem with synchronization with Active Directory and I think it maybe because of the upgrade issue!
    I also found the Application Event Log error below.  
    Error ID 1004: The resource 'D:\SharePoint 2010\14.0\Service\Microsoft.ResourceManagement.Service.exe' does not exist.
    This means, the Network Service account does not have rights to the %programfiles%\Microsoft Office Servers\14.0 folder so, the User Profile Synchronisation with
    Active Directory does not run properly.
    The solution is to grant read access to the Network Service account to the  ...\14.0 folder.
    https://support2.microsoft.com/kb/2473430?wa=wsignin1.0
    But I cannot find %programfiles%\Microsoft Office Servers\14.0 folder. Instead
    there is a folder in D drive: 'D:\SharePoint 2010\14.0 and I granted read access to the Network Service account to this folder and ran Full synchronization but still not a joy.
    Could you please advise me?
    Thanks

  • Upgrading Apache server independently

    Just wonder if there is any way to upgrade Apache httpd that comes with 9iAS (or 8i 8.1.7) to a newer release from httpd.apache.org without breaking the whole thing? I tried to do that on W2K:
    1) downloaded latest binary for Win32 (1.3.19 at that time)
    2) installed it locally at my dev PC
    3) copied Apache.exe, ApacheCore.dll and modules over existing files (and fixed up LoadModule in httpd.conf to match new module names)
    4) tried to start the server and it crashed complaining about modplsql.dll being invalid Apache module. In fact, none of the modules that came with 8.1.7/iAS 1.0.2.0.0 was recognized as valid. And Oracle-supplied 1.3.12 was complaining about new modules that came with 1.3.19 binary dist for 'accessing Apache API in the wrong way' or something similar to this.
    5) So much for the upgrade :( I had to revert back to 1.3.12 which is known to have bugs and security issues.
    So, the question is:
    is it possible to use latest binary distribution of Apache httpd to upgrade Oracle HTTP Server powered by Apache by copying binaries over existing ones? If yes - what config or whatever changes should be made for new Apache to recognize modplsql.dll as valid module?
    If this is not possible - how Oracle goes about fixing bugs and security issues in their custom version of Apache that are fixed in new releases from Apache.org? I didn't see any patches/upgrades for httpd on MetaLink (did I search for them in a wrong place?)
    thanks in advance,
    Bob.

    I would be quite interested in the answer to this as well. Apache 1.3.12 (used with iAS 1.0.2) has numerous security issues, which have been patched with newer versions of Apache.
    Does Oracle plan on supporting these security patches?
    null

  • After upgrading Apache to 2.2.23 there is a problem

    I (perhaps foolishly) upgraded Apache from 2.2.22 to 2.2.23 on OS X Mountain Lion Server. Following the upgrade, remote clients on the LAN cannot access the Web server's default.html.en web page. The DNS entries still look okay on OS X Mountain Lion Server.
    Any ideas as to what might have got broken/overwritten by Apache by doing the upgrade that I need to fix or could something be blocking things?
    Also, while probably not related, when, directly from the (updated) web server machine, I access 127.0.0.1 from within the web browser I can see the start up web page for Apache on OS X Server (so Apache is running, just can't be accessed remotely). However, when I try to access the same web page, again directly from the local web server machine, but this time using localhost instead of the IP address in the URL then the web page doesn't appear.
    The hosts file on the web server has the following entries:
    127.0.0.1     localhost
    255.255.255.255     broadcasthost
    ::1             localhost
    fe80::1%lo0     localhost

    Yes, I should have backed up httpd.conf but unfortunately I didn't (it was a very long day). On the upside I am learning way more about httpd.conf than I ever thought I would.
    After some soul searching I have since discovered that the ./configure string should also have had --disable-version in it. This is because it is a built-in module.
    So a recompile of Apache and Apache is running and remote client machines can see 'html' based web pages. However, there remains a problem in that accessing php pages results in the php code being viewed instead of the web page. So something is still broken somewhere just not sure what. Any ideas? Please advise.
    Below is a snippet of my httpd.conf RE the PHP side of things:
    Snippet----------------------------
    LoadModule php5_module        libexec/apache2/libphp5.so
    #I have checked the libexec/apache2/libphp5.so exists. Still scratching head!
    PHPIniDir “/etc/php.ini”
    <IfModule php5_module>
        AddType application/x-httpd-php .php
        AddType application/x-httpd-php-source .phps
        <IfModule dir_module>
            DirectoryIndex index.html index.php
        </IfModule>
    </IfModule>
    Include /private/etc/apache2/other/*.conf
    End snippet----------------------------
    By the way, doing a 'php -v' gives me the following result in Terminal which I presume means that PHP is okay but for some reason Apache or the Server is missing something but I don't know what that might be
    PHP 5.4.10 (cli) (built: Jan  9 2013 09:33:16)
    Copyright © 1997-2012 The PHP Group
    Zend Engine v2.4.0, Copyright © 1998-2012 Zend Technologies

  • SCSM 2010 to 2012 Management server upgrade failed

    I upgrading my scsm 2010 to 2012 both Management and DW server.
    So i have set up the secondary lab environment and do this.
    The DW server has been upgraded successfully to 2012.
    When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
    Log as below.
    2014-08-26T14:48:28.7717429+05:30    Always:    Trace Session Started
    02:48:28:
    02:48:28:Application Started
    02:48:28:This is 64-bit application.
    02:48:28:Product ID  is NOT installed
    02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
    02:48:28:Found SMServer components
    02:48:28:Found SMConsole components
    02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
    02:48:28:Using local Analysis server as default instance
    02:48:28:Using 'DWASDataBase' as default Analysis server database name
    02:48:28:Using 'Default' as default Analysis server database file path
    02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
    02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
    02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
    02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
    02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
    02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
    02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
    02:48:29:All vital setup files found.
    02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
    02:48:29:Checking dependencies for Server upgrade...
    02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
    02:48:42:Datawarehouse is up-to-date
    02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
    02:48:42:[GetManagementGroupPropertiesFromDB]:  Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
    02:48:42:[GetManagementGroupPropertiesFromDB]:  Found Management Group information.
    02:48:42:[GetManagementGroupPropertiesFromDB]:  Found Primary SDK server:..net.
    02:48:42:Validating SmAdminRoleGroup
    02:48:43:Checking MU OptIn state
    02:48:43:MU is not opted in
    02:48:43:Start adding DataItems
    02:48:43:System Center Service Manager Install
    02:48:44:Final Install Tasks
    02:48:44:Done adding DataItems
    02:48:46:Getting Domain List
    02:49:35:LoadPrerequisites: Start adding ComponentTitles
    02:49:35:LoadPrerequisites: Start adding DataItems
    02:49:35:Memory check
    02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
    02:49:36:Memory check
    02:49:36:Processor speed check
    02:49:36:Processor speed check
    02:49:36:Processor speed check
    02:49:36:IIS check
    02:49:36:ASP.NET check
    02:49:36:Basic Authentication check
    02:49:36:Windows Authentication check
    02:49:36:Microsoft .NET Framework 4 check
    02:49:36:Windows Service Pack check
    02:49:36:Microsoft Report Viewer Redistributable check
    02:49:36:PowerShell 2.0 check
    02:49:36:SharePoint Server 2010 check
    02:49:36:SharePoint Farm Administrator check
    02:49:36:SharePoint Server 2010 configuration check
    02:49:36:ADO.NET Data Services Update check
    02:49:36:Microsoft SQL Server 2008 Native Client check
    02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
    02:49:36:LoadPrerequisites: Done adding prerequisites checks
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Memory check prereq.
    02:49:36:CheckPrerequisites:         Logic Type:and    MemoryCheck-8gbWarn: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     Memory check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
    02:49:36:Entered RequiredAMO
    02:49:36:Trying alternate method of detection using Assembly.Load
    02:49:36:CheckPrerequisites:         Logic Type:and    AMO-err: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     Microsoft SQL Server 2008 Analysis Management Objects: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
    02:49:36:CheckPrerequisites:         Logic Type:and    ProcessorSpeedCheck2.5MHz-Warn: 0
    02:49:36:CheckPrerequisites:         Logic Type:and    ProcessorCoreCheck2Core-Warn: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     Processor speed check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
    02:49:36:CheckPrerequisites:         Logic Type:and    Win2k8R2Sp1Check-Err: 0
    02:49:36:CheckPrerequisites:
    02:49:36:CheckPrerequisites:                 ProductType was not a match.  Looking for: LanmanNT Found: ServerNT
    02:49:36:CheckPrerequisites:         Logic Type:or    Win2k8R2Sp1DCCheck-Err: 2
    02:49:36:CheckPrerequisites:
    02:49:36:CheckPrerequisites:                 The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
    02:49:36:CheckPrerequisites:         Logic Type:or    WinSrvrVNextCheck-Err: 2
    02:49:36:CheckPrerequisites:
    02:49:36:CheckPrerequisites:                 ProductType was not a match.  Looking for: LanmanNT Found: ServerNT
    02:49:36:CheckPrerequisites:         Logic Type:or    WinSrvrVNextDCCheck-Err: 2
    02:49:36:
    02:49:36:CheckPrerequisites:     Windows Service Pack check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
    02:49:36:Entered RequiredReportViewer
    02:49:36:CheckPrerequisites:         Logic Type:and    RptVwrCheck-err: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     Microsoft Report Viewer Redistributable check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
    02:49:36:CheckPrerequisites:         Logic Type:and    PowerShell2Check-err: 0
    02:49:36:CheckPrerequisites:         Logic Type:or    PowerShell2Check32-err: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     PowerShell 2.0 check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
    02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    02:49:36:Found version 3.5.30729.5420
    02:49:36:CheckPrerequisites:         Logic Type:and    ADODotNetDataServicesHotfix-err: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     ADO.NET Data Services Update check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:36:
    02:49:36:**************************************************
    02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
    02:49:36:CheckPrerequisites:         Logic Type:and    SQLNCLI10-err: 0
    02:49:36:
    02:49:36:CheckPrerequisites:     Microsoft SQL Server 2008 Native Client check: Passed
    02:49:36:
    02:49:36:**************************************************
    02:49:37:CheckPrerequisites: Return Value 0
    02:49:39:Doing Pre-Upgrade checks...
    02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
    02:49:39:Validating SQL Instance TESTSER
    02:49:39:SQL Server: TESTSER
    02:49:39:SQL Server version: 10.50.1600.1
    02:49:39:Full text search installed: True
    02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
    02:49:39:Stopping Service OMSDK on server
    02:49:39:Starting Service OMSDK on server
    02:49:41:Stopping Service OMCFG on server
    02:49:44:Starting Service OMCFG on server
    02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
    02:49:47:Checking for available free disck space
    02:49:47:Checking directory write access
    02:49:47:*** Pre-Upgrade checks passed ***
    02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
    02:49:47:SetProgressScreen: StartMinorStep.
    02:49:47:statusUpdate: Resetting progress bar.
    02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor.  Launching it now.
    02:49:47:SetProgressScreen: Init MSI Install progress.
    02:49:47:statusUpdate: Resetting progress bar.
    02:49:47:LaunchMsi: Msi mutex is not in use.
    02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
    02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
    02:49:47:LaunchMSI:  Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
    02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode.  Setting the external UI.
    02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
    02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
    02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
    02:50:09:Install Progress - (ProcessComponents) Updating component registration
    02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
    02:50:10:Install Progress - (StopServices) Stopping services
    02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
    02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
    02:50:17:Install Progress - (RemoveFiles) Removing files
    02:50:17:Install Progress - (CreateFolders) Creating folders
    02:50:17:Install Progress - (InstallFiles) Copying new files
    02:50:30:Install Progress - (_CreateDatabase) Creating Database
    02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
    02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
    02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
    02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
    02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
    02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
    02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
    02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
    02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
    02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
    02:52:26:Install Progress - (RegisterUser) Registering user
    02:52:26:Install Progress - (RegisterProduct) Registering product
    02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
    02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
    02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
    02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
    02:52:26:Install Progress - (PublishFeatures) Publishing product features
    02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
    02:52:26:Install Progress - (PublishProduct) Publishing product information
    02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
    02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
    02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
    02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
    Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
    02:57:44:Install Progress - (Rollback) Rolling back action:
    02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
    02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
    02:57:44:Install Progress - (Rollback) Rolling back action:
    02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
    02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
    02:58:43:LaunchMSI: Setting rollback to true
    02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
    02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install.  We did not launch the post process delegate.
    02:58:43:SetProgressScreen: FinishMinorStep.
    regards Sundaresan.C

    Jeremiah,
    We ran into this as well. One of two options:
    1.) Just run a repair on the SQL Server installation
    2.) Repair the WMI settings on the SQL Server as descibed here:
    http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
    bb

  • Data source migration in parallel to CRM server upgradation

    Hi Experts,
    We are working on BI 7.0 system which pulls data from CRM 2004. Recently we upgraded BI environment from BW3.5 (to BI.70 SP -16).
    Now we are re-modeling the existing BI design due to performance issues & to use BI functionalities. We would like to migrate the data sources in BI also to BI version so that we can get advantage of using DTP & transformations.
    But the issue here is now we started to up grade our source system also from CRM 2004 --> CRM 2007. I beleive that the data source version will be maintained in source system (CRM) tables also.
    So if we migrate the data source now (before CRM upgrade), will it cause any issues in BI once CRM server upgrade done?
    Note: We can implement all of our new designs with out data source migration.
    Please advice us to proceed. Let me know if you need more details.
    Thanks in advance.
    Regards,
    Arun Thangaraj.

    Hi reddy,
    1). Why Migration Process?
    Migration process is to convert BW 3.x objects ( such as Data source, Trasfer rules and update rules etc) into BI 7.0 objests.
    2). Why we are Migrating BW 3.X objects into 7.0 objects?
    We are Migrating 3.x data source into 7.0 inorder to avail three functions, Those are
    a). Direct data acquisition
    b). Realtime Data Acquisition (RDA)
    c). BI Accelarator.
    3) .Regarding With export and Withour export options ?
    These two options come in the process of Migration step. Regarding these options clearly described in the fourth point as bellow.
    4). What will happen in this Migration process?
    ( Remember at the time Migration Transfer structure and Transfer rlues deleted, keep in mind go throgh bellow steps).
    What ever may be the option selected (i.e, With Export or Without export ) data source will migrate to 7.0.
    But if you choose With export option deleted Transfer Structure and Trasfer Rules will store in the table " RSDSEXPORT". If you select other option (i.e, Without export ) the deleted Trasfer structure and trasfer rules perminently not avaliable.
    Thats why always go with With Export option only. This will help to revert back 7.0 data source into 3.5 data source when ever is there any requirement in future.
    Please go look into bellow link.
    Re: Migration of datasource from 3.5 to 7.0
    if u r satisfed about my answer please assign points.
    Thanks & Regards,
    Kotesh.

  • 10.6.8 to Mavericks Server Upgrade loses Open Directory Users

    Hi,
    I have an OpenDirectory Master running OSX Server 10.6.8. An upgrade to Mavericks 10.9 has just failed.
    The server has about 50 OD users and passwords need to be retained across the upgrade. Apart from OD, the only other active service is AFP file sharing.
    DNS is good forward and back as per this article: OS X Server: Steps to take before upgrading or migrating the Open Directory database
    I followed these Apple guidelines for server migration: OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server.
    I cloned the boot drive, booted from the clone, upgraded to Mavericks, then installed the Mavericks Server app.
    On opening the Mavericks Server app "Configuring services' showed for 5 minutes, but then an error message appeared. I did not record it exactly, but it was something like, "There was an error configuring the server. Certificate not valid!".
    I was able to continue through the error but on opening Server app there were no OD (local/network) users showing. Authentication was not happening.
    I had underestimated the time to get the installation done and I had used up the window of downtime I had booked - I did not have much time to troubleshoot. So, I cut back to the original hard drive and the server is back to 10.6.8 again.
    Can anyone point me in the right direction to find out what may have gone wrong? How can I get my users into 10.9 Server?
    Many thanks,
    b.

    Linc Davis advice is spot-on, as usual.
    There seem to be dozens of sub-databases in the LDAP database. A problem in any of them seems to derail the entire conversion process. I tried a straight conversion and was also disappointed that there were unresolved issues, and it meant that the conversion failed.
    So I did the export route using WorkGroup Manager, and exported four sets:
    Users
    Groups
    Computers
    Computer groups
    go to the appropriate pane (e.g., Users) and Select All, then choose Export, and give it a name (probably with an embedded date in case you need to do it again later)
    Then use 10.9 WorkGroup Manager (available as a separate download) to Import.
    When re-imported, everything worked just fine (except the passwords, which cannot be carried forward using this method). I did have to manually enable at least one service, such as File Sharing service in Server [admin], or users showed up as "not allowed" [to log in].
    This entire process of getting Server 3 to work is fraught with peril, and everything converges on ONE diagnostic, "Network users can't log in". Which means you blew it, but provides no additional information about WHERE you blew it.
    There do not appear to be any magic bullets. It is just a tough slog. Users who reported success after failing the first time reported they returned to fundamental principles and did all the steps over, in order, to attain success.

  • OS X Lion Server upgrade *failed*, now what?

    The installation process got as far as registering a message like, "Upgrading Services, failed". The only option was to click the Lion icon for reboot. That, I did, then I couldn't find the 10.7 Server Admin Tools, which I had to download separately. The "Open Directory" part of the Server Admin UI does not have the *expected* start/stop button and the service is stopped.
    It would be nice to have a post-upgrade program to checklist what went well, what needs fixing with pointers to resources. It's possible none of my services programs got upgraded.
    I got an email receipt with a link to "Report a Problem" which turns out to be mostly a hole for getting lost, but at least it got me here to present feedback.

    goeres wrote:
    But do we need all the blows and wristles?
    Yes.  Lion Server out of the box does not allow for complex custom configurations short of manually editing text configuration files, which is an ironic step backwards from SL Server considering Apple's commitment to ease-of-use GUIs. 
    Instead of improving the admin tools that were available with SL Server, they simply removed too many of them.  That would suggest that they've given up on the market for business servers to focus on the market for toy servers for home use, which is a bit disconserting considering that Lion Server's security is also woefully lacking out of the box.  It's hard to figure how any IT professional could take it seriously.
    The Internet is a dangerous place to play with a server.  Apple's quest to simplify OS X Server with Lion has resulted in a server package that is dangerously simplistic.  If Lion Server becomes popular for home use, I expect to see a rapid expansion of botnets.

  • How to upgrade Apache 1.2.22 - 1.3.33, Oracle 9i

    I have to upgrade Apache to newer version for security reason. I'm running Oracle 9i database release 2 (9.2.0.1.0). I just got 20+ pages report what needs to be fixed and this should fix most problems.
    I just made clean install on test machine. Can i just download new version of Apache from apache.org and install it to oracle_home, or what? Do i have to make changes to httpd.conf?
    I would be very grateful if someone could help me with this.

    If you apache is part of your 9i database SW then download patchest for Oracle 9i and apply it to current version. The patchset for DB include for all components (also for apache)
    btw: apache version in 9i is 1.3.x not 1.2.x

  • "best practice" documentation for installing/upgrading Apache 2, php, mysql

    does any documentation exist for the recommendation procedures for installing/upgrading Apache 2, mysql, php ???
    thanks

    Yes me also
    MacBook Pro 15", iMac 24", G4 Dual 867   Mac OS X (10.4.9)  

  • E-Mail problem after server upgrade

    I had my email on my phone for over a year. It worked perfect... until the office upgraded the server.
    After the upgrade I get the error message "Cannot get mail" "The connection to the server failed." I can access another co-workers email on my phone with the same settings, but not my own.
    I have tried deleting the exchange account and setting it up again, but that didn't work. I tried deleting it, rebooting the phone, and then setting it up again.
    What doesn't make sense to me is that I can access someone else's email, but not my own. It is very frustrating. The people that use Android phones are having no problems after the server upgrade.
    Any suggestions?

    EAT729 wrote:
    Any suggestions?
    Yes.  Contact your IT department.

  • Is there a procedure to upgrade Apache 2.2.16 to 2.2.17 in redhat 5.x?

    Is there a procedure to upgrade Apache 2.2.16 to 2.2.17 in redhat 5.x?

    Sorry, but you are there in a Solaris and not in a RedHat forum

  • Server upgrade newbie questions

    Hi Everyone!
    So I work for a small-ish nonprofit and as I am researching information on what my to-be system is, I am running into a lot of questions.  I have tried google-ing them with not much success.  So I am hoping that all of your expertise might help
    drive me in the right direction.
    Mind you, I have only been with our organization for about 2.5 weeks, and it is all over the place.
    Right now, we have approximately 90 PCs, both desktops and laptops, distributed around 12 counties.  ~50% of these PCs are utilized by our staff, while the others are used by the general public for internet and document editing.  We also have ~
    30 smartphones that I need to manage at some level.  I would also mention that we have PCs with XP, Win7, Vista, and Windows 8 (these PCs were all purchased by different people at different times, or donated to our organization).  We are currently
    transitioning to google mail, so I was also planning to use the google apps extension to integrate with AD.  Right now, our local "headquarters" is where our servers are located, and the person who set our server up had installed SBS 2011.  There
    has been a domain setup, and all but one of the local PCs were added to it (minus the Win8 machine due to SBS limitations).
    Because I am new to this, and the situation is a bit complicated (as you can see from above), I was really impressed with Server 2012 R2 because of some of the capabilities of it.  The primary functions of the server are to provide a way for me to manage
    all of the users (even the distributed ones), the PCs, and the devices (phones).  The way that I understood this, is that DirectAccess could allow me to provide help desk support (I am the only IT person in our organization so I am wearing multiple hats),
    removing the programs that were utilized by my predecessors (i.e. logmein).  I am hoping that with them all added to the domain, I would also be able to ensure that they were being updated properly on a schedule.  We also have multiple different
    anti-virus softwares that have been deployed at different times on different OSs.  I was hoping to be able to standardize this and be able to manage that as well.
    So....the questions....
    Because we are a nonprofit, we are members of techsoup and can get the software cheap enough, but I don't really understand the licensing, particularly the Remote desktop services CALs.  How does this service differ from what I currently understand
    as RDC.  Do I need to get one of these CALs to be able to provide remote support to users/PCs?
    How do I properly assess the software?  Because I have never performed a server upgrade, or really messed with Server other than seeing the SBS console and being able to muddle through it easy enough, an I going to have issues when upgrading from SBS
    2011 (backing up and redeployment)?  The current Hardware is going to be on the low end of the min. sys. requirements.  Is this going to be a huge issue considering the size of our organization? 
    Am I even on the right track?  
    My hope is to create a semi one time investment (for at least the next few years) so that the focus can be turned towards upgrading field equipment.  
    I would appreciate everyones thoughts and help (as I mentioned in the title, I am a newbie at server stuff).
    Thanks in advance!

    "Because we are a nonprofit, we are members of techsoup and can get the software cheap enough, but I don't really understand the licensing, particularly the Remote desktop services CALs.  How does this service differ from what I currently understand
    as RDC.  Do I need to get one of these CALs to be able to provide remote support to users/PCs?"
    Your absolute best source of licensing information and clarification is to speak with a trained Microsoft licensing specialist.  You can find one by starting your search at
    www.microsoft.com/licensing.
    Are all these devices owned by your organization?  If so, dump XP as quickly as possible.  You also might want to check into Office 365 instead of google apps, unless you like the fact that google reads everything you do.  The combination
    of Office 365 and Windows Intune might seem like a lot of money up front, but when you consider the significant amount of management time that is simply eliminated by them, they can be quite cost-effective.
    It's pretty hard to 'assess' the software without any knowledge of applications needed, usage patterns, vendors, etc.  If you do not feel comfortable performing the function yourself, find a reputable local consultant to come in and assist.
    . : | : . : | : . tim

Maybe you are looking for