10.x product are supported on ELM 9.1(2)

If I have a server with ELM 9.1(2) and I upgrade unity connection to 10.5, it's is supported? or I need to migrate license on PLM which is include on CUC 10.5 ?

ok i just saw this, we need to install this file elm_LicenseDef_9_1_v1.cop.sgn
thanks

Similar Messages

  • Error message: "Adobe Application Manager "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem". When following the link, Adobe Support Advisor has been discontinued 'because their products are now so stable. -I can

    I receive a message when trying to open Photoshop CS6, Illustrator CS6, etc., then when I try to follow the directions for troubleshooting, the installer fails to initialize.
    Error message: "Adobe Application Manager is needed to resolve this problem. However it is missing or damaged". Then, after download, the program fails to load and displays this message:  "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem". When following the link, Adobe Support Advisor has been discontinued 'because their products are now so stable. -I can see how stable they are.. How do I get assistance with Installer issues?
    Any helpful thoughts?

    Hi David,
    Kindly try out the steps in the below mentioned link to install Creative Cloud.
    Error: "Installer failed to initialize" | Windows
    Thanks,
    Atul Saini

  • Since "upgrading" (?) to Lion, my Hewlett Packard scanner has ceased to function. "Power PC products are no longer supported." Is there any way to get my scanjet3570c to work again as it did so well before?

    Since upgrading (?) to Lion my HP 3570c scanner won't operate because "power PC products are no longer supported"
    Is there any way I can get a perfectly serviceable scanner (HP3570c) to work with my iMac?

    Is it just the HP software that's not compatible, rather than the scanner itself?
    A couple of things you could try that may work. Launch Image Capture in the Applications folder and see if that recognises your scanner. If that draws a blank, you could try downloading VueScan from www.hamrick.com and see if that works. If does, you'll need to buy a licence to make it fully functional.

  • INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes.

    Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
    Below are details of my pc.
    OS Name    Microsoft Windows 7 Professional
    Version    6.1.7601 Service Pack 1 Build 7601
    Other OS Description     Not Available
    OS Manufacturer    Microsoft Corporation
    System Name   ...........-HP
    System Manufacturer    Hewlett-Packard
    System Model    HP ProBook 4530s
    System Type    x64-based PC
    Processor    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
    BIOS Version/Date    Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
    SMBIOS Version    2.6
    Windows Directory    C:\windows
    System Directory    C:\windows\system32
    Boot Device    \Device\HarddiskVolume1
    Locale    United Kingdom
    Hardware Abstraction Layer    Version = "6.1.7601.17514"
    User Name    ...........-HP\................
    Time Zone    South Africa Standard Time
    Installed Physical Memory (RAM)    4.00 GB
    Total Physical Memory    3.94 GB
    Available Physical Memory    1.00 GB
    Total Virtual Memory    7.87 GB
    Available Virtual Memory    1.25 GB
    Page File Space    3.94 GB
    Page File    C:\pagefile.sys

    To clarify further....  It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine.  In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows.  If you are using a 64bit OS, you must install the 64bit software.  Again, this would include Forms/Reports, WLS, and JDK

  • What are supported device attributes on iOS during enrollment phase?

    I'm installing configuration profile using over-the-air (OTA) enrollment. What are supported device attributes on iOS during first phase payload? I'm sending sth like:
    <plist version="1.0">
        <dict>
            <key>PayloadContent</key>
            <dict>
                <key>Challenge</key>
                <string>challenge</string>
                <key>DeviceAttributes</key>
                <array>
                    <string>UDID</string>
                    <string>DEVICE_NAME</string>
                    <string>VERSION</string>
                    <string>PRODUCT</string>
                    <string>MAC_ADDRESS_EN0</string>
                    <string>IMEI</string>
                    <string>ICCID</string>
                </array>
                <key>URL</key>
                <string>https://my-profile-server</string>
            </dict>
            <key>PayloadDescription</key>
            <string>Enter device into the encrypted profile service</string>
            <key>PayloadDisplayName</key>
            <string>Profile Service</string>
            <key>PayloadIdentifier</key>
            <string>com.xxx.mobileconfig.profile-service</string>
            <key>PayloadOrganization</key>
            <string>XXX</string>
            <key>PayloadType</key>
            <string>Profile Service</string>
            <key>PayloadUUID</key>
            <string>1a21d4dd-6723-45c5-a184-c3fe0075db14</string>
            <key>PayloadVersion</key>
            <integer>1</integer>
        </dict>
    </plist>
    Is there any more attribute that I can get from the device in this payload? For example serial number? Is there any official list of possible attributes? Any help would be much appreciated. Thanks.

    May be here:  http://www.apple.com/support/ios/keynote/

  • Which Web Service message formats are supported?

    Hi,
    From the documentation it looks like only SOAP binding 1.1 is supported but nothing is mentioned about the supported message formats, e.g. Document literal (wrapped/bare), rpc-encoded, rpc-literal. etc. Does anybody know which are supported?
    Regards Pete

    Hi,
    I opened a SR on Metalink and got this answer:
    ApEx supports only RPC/literal style. The current support for Web services was designed to work with RPC style Web services nearly three years ago. We (
    ApEx development/product management) are reviewing enhancement to more broadly support Web services and hope to have that support in a future release.
    For the current support of Web services in Oracle Application Express, a design decision was made to support only WSDL’s that use the W3C XML Schema specification as it
    is data type system. Just converting a Web service to RPC style is not all that is required to make it work properly with Application Express. It also must use the XML Schema specification as its data type system and prefix those type references, with the same prefix as the XML Schema reference in the definitions declaration in the WSDL.
    Oracle Application Express expects type declarations to be fully qualified with the same prefix of the reference to the XML Schema specification as in the WSDL’s definitions declaration (http://www.w3.org/2001/XMLSchema). If the WSDL contains type references that are not qualified with the prefix of the XML Schema specification, then editing the WSDL to include these type references with the corresponding prefix will allow Oracle Application Express to properly parse the WSDL.
    Support for more loosely defined types is planned for a future release of Oracle Application Express.
    Regards Pete

  • ERecruitment - How are support groups created?

    Prior to support packs we maintained support team groupings in the following IMG location:  SAP E-Recruiting -> Technical Settings -> User Administration -> Define User Lists for Support Team
    This IMG config no longer exists and it appears this has been replaced with support groups.  Where are support groups configured?
    Thanks,
    Jeff

    Hi,
    generating direct links to bsp applications is not the common way for e-recruting. Creating support groups is an administrator task so you find the link to the application on the standard admin startpage (ID 0004). If you plan to have your admin / key user maintaining the support groups in production you should include the link in your customer startpage, too.
    As you mention the old version prior to EhP3. If you used the former group customizing be sure to migrate the old lists to the new support groups.
    Rgds.
    Roman

  • What cellular products are compatible with Adobe flash-player?

    What Cellular products are compatible with Adobe Flash -player?

    To be precise, some OLD Android handsets will still have Flash Player installed, but it's not officially available to new ones (nor is it updated). There are some unofficial hacks in the Google Play store that allow you to install it on newer handsets but they're nothing to do with Adobe, and I wouldn't trust them all that much.
    Kathymsg is asking in the Adobe Reader forum - so if she's asking about running Flash content within a PDF file, the answer is simple: there is no support on any mobile device and probably never will be.

  • Production and support

    HI,
      Iam new to this forum.
    in production and support what we will do daily activities as a bw consultant.what will be the errors occur.can any one have document please send me.
    points will be assigned.
    Thanku
    Message was edited by: Ron Silberstein

    D PAVANI,
    There are lots of errors occur in production and support like
    1.timestamp error:replicate the ds
    2.rfc failure error: check through sm59
    2.ods data is not acivated error: manulaay activate it
    4.ale remote is locked error: check with basis
    6.sid is not matched:check master data before loading t data
    7.sid number range error.: schduler menu set number ranger
    8.short dump: chek it in st22
    9.cache problem.: restart the load,refresh the catch
    regards
    nain

  • What features of Workshop 8.1 are supported Weblogic Express 8.1?

    I wish to find a URL or any information that explicitly states which
    features of Workshop 8.1 are supported in Weblogic Express 8.1. I
    understand that Express does not support EJBs and that some of Workshop's
    Controls are implemented using EJBs. I would assume that those Controls
    would not be supported in Express. Can any of the Controls be used when the
    targeted machine is configured with Express?

    In 8.1 all workshop controls rely on the EJB container, and thus none of
    them work on Express. Using the pageflow portability kit, pageflows without
    controls can be used on WLX -- they are just struts extensions. We'll be
    relaxing the reliance of controls on the EJB container in the next major
    release.
    -George Snelling
    Product Manager, Workshop
    "Denis" <[email protected]> wrote in message
    news:403d0341$[email protected]..
    I wish to find a URL or any information that explicitly states which
    features of Workshop 8.1 are supported in Weblogic Express 8.1. I
    understand that Express does not support EJBs and that some of Workshop's
    Controls are implemented using EJBs. I would assume that those Controls
    would not be supported in Express. Can any of the Controls be used whenthe
    targeted machine is configured with Express?

  • Creative cloud says there are updates but no products are listed when I open it up.

    Creative cloud says there are updates but no products are listed when I open it up. Icon is greyed in task bar.
    I have Adobe Creative Suite Production Premium.

    Duplicate message deleted... this is an open forum, not Adobe support, so more than one message about the same problem is only going to confuse things
    Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • FAQ: Revel basics: What operating systems are supported by Revel?

    Q:What operating systems are supported by Revel?
    A: Adobe Revel is a Cloud based photo hosting service accessible via a free photo app for your Mac, iPad, and iPhone. You can download the Revel App on your iPhone and/or iPad using the same Adobe ID associated with your Photoshop.com account. To See Revel in action click here. See also "Working with Adobe Revel". With the app, you can upload, download, and share files, as well as edit photos.
    Q: Can I access Revel through a web browser?
    A: You can access web version of Revel at www.adoberevel.com. The web version of Revel includes almost all the features of Revel EXCEPT the ability to edit your photos for Mac and Windows Android users you can download Revel Importer. Revel Importer is not a full version of Revel but it does give you a way to import the photos on your Android phone into your Revel photo library.
    Q: What are the differences between the Revel apps for different devices and platforms?
    A: The key differences are as follows:
    iPhone, iPad and Mac — Access, organize, edit, and share your photos on all your iOS devices, anywhere you are.
    Web — Upload, access, and view your photos via your web browser.
    Revel Importer for Android
    Revel currently supports JPEG files only. At Adobe, we are committed to continued innovation with Revel, and plan to support additional platforms, features, and formats in the future.
    Coming soon:
    Adobe Revel for Android®
    NOTIFY ME
    Adobe Revel for Windows®
    NOTIFY ME
    RELATED LINKS:
    Getting started with Revel
    PS.com Revel Product Page  (includes links to app store)
    Revel basics: What file formats does Revel support?

    Just to avoid confusion - during provisioning, the phone is downloading a configuration from remote server. Phone is client. Provisioning process require a server (HTTP or FTP or TFTP) running somewhere.
    You are speaking about browser, not server, so it seems you are speaking about manual configuration of phone, not the provisioning. Even in the case you are speaking about server, you speaking about upgrade of OS, not the provisioning (HTTP/FTP/TFTP) server software. On the other side, you are speaking about "initial profile downloads from Windows 7" asking about browser versions. I'm confused. Can you explain what are you trying to do in more details ?
    Something like: "I did A, expecting B as result but C happened".
    Debug/log from phone device and/or catched communication between browser and phone and/or phone and provisioning server may help to analyze the problem.

  • I need to know if my membership(s) with Adobe Reader XI, Adobe Forms Central and Acrobat XI products are still active?  If so; when does my membership(s) due to expire?

    9 May 2014
    Dear Tech or Customer Support:
    I would like to know if my subscriptions memberships with Adobe Reader XI, Adobe Forms Central and Acrobat XI products are still active?  If so; when does my subscriptions memberships due to expire?
    Please reply back by email with full details as to my requests at your earliest availability to:  [email protected]
    Sincerely,
    Gwendolyn C. Baxter

    Hello,
    I just solved this problem on my computer.
    Windows 7 comes with only one "Voice" installed. "Microsoft Anna - English (United States)" I'm not sure what you get if your in another country.
    You can test your "Voice/Voices" by running Microsoft Narrator. Click [Start] button and type "Narrator" in the [search programs and files] box. Press [Enter]. Your computer should begin talking. Click [Voice Settings] button to see a list of installed voices. Take note of the voices listed. "Mine has just the one."
    Adobe Reader must have a voice selected that you have installed. To verify your settings Run Adobe Reader. From the top menu click [Edit] then click [Preferences] at the bottom of the list. In the Preferences window click [Reading] from the left hand list. Find "Read Out Loud Options" Un-check [Use default voice] Choose a voice from the drop down menu that you have verified is installed on your computer. Click [OK]
    My Adobe Reader had 4 voices listed to choose from. I found this curious because I only have one voice.
    Hope that helps.

  • My wireless does not work on my ipad or my iphone.  It is connected and laptop and kindle both work.  Any idea why my apple products are not picking up the wireless?  They did in the past up until 2 days ago.

    My iphone and iPad suddently stopped picking up my wireless connection.  Other products are able to connect (laptop and kindle).  Any suggestions?

    Try resetting your wireless router by unplugging the router from the power for about 30 seconds then plugging it back in.

  • Feb/Mar 2015 Update: OneDrive for Business Error "Incompatible Office products are installed on your machine."

    After Installing the Feb 2015 Updates for Office 2013 ProPlus via ClicktoRun, OneDrive no longer opens with the error message:
    "Sorry, we can’t perform this action. Incompatible Office products are installed on your machine. If you have an administrator, please contact them for help. "
    The eventviewer info is:
    - <System>
      <Provider Name="Microsoft Office 15 Alerts" />
      <EventID Qualifiers="0">300</EventID>
      <Level>4</Level>
      <Task>0</Task>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated SystemTime="2015-02-11T17:08:53.000000000Z" />
      <EventRecordID>605</EventRecordID>
      <Channel>OAlerts</Channel>
      <Computer>BP-W-7DB824.raydon.com</Computer>
      <Security />
      </System>
    - <EventData>
      <Data>Microsoft OneDrive for Business</Data>
      <Data>Sorry, we can’t perform this action. Incompatible Office products are installed on your machine. If you have an administrator, please contact them for help.</Data>
      <Data>702089</Data>
      <Data>15.0.4693.1000</Data>
      <Data />
      <Data />
      </EventData>
      </Event>
    I have other office products on here including:
    SharePoint Designer 2010
    SharePoint Designer 2013
    Microsoft PowerBI Designer Preview
    and this is installed on Win 8.1 Enterprise
    Kind of stumped what is causing this... I see KB2920798  mentions this error message is now added when cant open a document due to a mix of click-to-run and MSI install for office.  I only have click to run for Office 2013 and the MSIs are only for
    addons in excel (power query) and the additional Microsoft Software...
    Anyone have ideas what is causing this and how to resolve?
    I just finished applying March 2015 C2R updated on Office and the same issue recurred.  This time I simply rebooted and it resolved.  My best guess is it has something to do with a locked file that can't be updated but the Office Update installer
    doesn't prompt to reboot.

    I have the same problem. But I have Czech versions of the Word and OneDrive for Business ("OneDrive pro firmy").
    I do not have the SharePoint Designer nor update KB2020798. I received KB2920746
    on 11th February (plus other updates for Office, but any other for OneDrive for Business). Anyway,
    uninstall of the KB2920746 doesn't help.
    The error in Czech:
    Microsoft Word
    Je nám líto, ale tuhle akci nemůžeme provést. Na počítači máte nainstalované nekompatibilní produkty Office. Pokud máte správce, požádejte ho o pomoc.
    P1: 702089
    P2: 15.0.4693.1000
    P3: 
    P4: 
    It helped me to unistall OneDrive for Business (Onedrive pro firmy) - displeasing solution,
    right?;-(

Maybe you are looking for