100% highest active time for HDD

I have the 100% highest active time issue....
This seems to be a well known problem, however no solution is found for it yet. I have done pretty much everything imaginable from scans to system tuneups and configurations.
I reinstalled the OS (several times with different versions like pro, ultimate, enterprize ), switched to win 8... got the latest Bios update, got the latest drivers from HP then downloaded them from intel website, I even got the driver for the disk from the manufacturers website, changed the AHCI mode to RAID (- which also enables AHCI btw)... nothing works.
The completely fresh install of any OS with only the drivers installed runs the HDD on 85-100% in idle.
I have some experience in this and from what I saw till now, the Highest active time varies normaly between 10-25% (more or less) even if your disk is performing some more demanding stuff.
Till recently I thaught that my HDD is to blame, but its not...other guys also face the same issue after replacing it.
(The disk and memories installed also pass all diagnosticks and checks without problem)
With i5 540m - 2.53 ghz, 8gb memory and the overall performance of the system is unbelivable LOW.
I have issues browsing the web, not mentioning other stuff.
Please, whoever reads this post and decides to advise with some solution like disabling search indexing for windows, or sfc scan or drive diagnosticks or pagefile size changes/ disabling, editing the startup services/apps, defrag/cleanup and so on and so on... You can spear that time for you cause the list of the things Ive done to solve this issue is allready too long to fit it in this post.
Recently I ordered an original instalation kit from HP which should arrive soon but at this point I think that the issue can only be solved by replacing the laptop.
*I have no idea what the kit contains, but this is the only thing I havent try yet.
Can this be Kernel related?
Does anybody have any ideas or permanent fix for this???

Similar Messages

Dv4-1275mx freeze for few mins and disk 100% highest active time.

           I bought a dv4-1275mx in june and about a week ago, my laptop started to freeze for few minutes and come back.In that time, i didn't do anything and when i checked Resource Monitor (already opened), i saw 100% in Highest Active time in Disk with small data read. This happened several times and when i checked the events, i found following,
Error    6/23/2009 10:08:42 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
Error    6/23/2009 10:01:48 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
Error    6/23/2009 10:01:48 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
Warning    6/23/2009 9:52:40 PM    ESENT    510    Performance    "Windows (500) Windows: A request to write to the file ""C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb"" at offset 2482176 (0x000000000025e000) for 8192 (0x00002000) bytes succeeded, but took an abnormally long time (60 seconds) to be serviced by the OS. In addition, 1 other I/O requests to this file have also taken an abnormally long time to be serviced since the last message regarding this problem was posted 84 seconds ago. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem."
Warning    6/23/2009 9:51:15 PM    ESENT    510    Performance    "Windows (500) Windows: A request to write to the file ""C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb"" at offset 2523136 (0x0000000000268000) for 8192 (0x00002000) bytes succeeded, but took an abnormally long time (60 seconds) to be serviced by the OS. In addition, 0 other I/O requests to this file have also taken an abnormally long time to be serviced since the last message regarding this problem was posted 5515 seconds ago. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem."
Error    6/23/2009 9:49:06 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
Error    6/23/2009 9:49:06 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
           In yesterday, I got and error message after windows start saying there is a problem in svchost module.Therefore i restart my laptop and then i didn't get any error messages.Then i tried to start firefox after about 5 mins and got a error message saying it stopped by data execution prevention.After about 1 min, i got a message saying windows will restart in 1 min and in restart, it did a checkdisk.After that i didn't got any error messages but i couldn't open firefox, therefore i installed it again and i found following events.
Warning    6/29/2009 7:26:35 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
Warning    6/29/2009 7:26:01 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
Warning    6/29/2009 7:25:49 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
Error    6/29/2009 7:25:02 PM    Service Control Manager    7000    None    "The GSRestartSvc service failed to start due to the following error:
The system cannot find the file specified."
Error    6/29/2009 7:25:02 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
Warning    6/29/2009 7:23:51 PM    Microsoft-Windows-WLAN-AutoConfig    4001    None    "WLAN AutoConfig service has successfully stopped.
Warning    6/29/2009 7:23:51 PM    Microsoft-Windows-WLAN-AutoConfig    10002    None    "WLAN Extensibility Module has stopped.
Module Path: C:\Windows\System32\bcmihvsrv64.dll
Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6001    None    The winlogon notification subscriber <Profiles> failed a notification event.
Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6000    None    The winlogon notification subscriber <Profiles> was unavailable to handle a notification event.
Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6001    None    The winlogon notification subscriber <Sens> failed a notification event.
Error    6/29/2009 7:23:47 PM    Microsoft-Windows-EventSystem    4621    Event System    The COM+ Event System could not remove the EventSystem.EventSubscription object {CEB8B221-89C5-41A8-98CE-79B413BF150B}-{00000000-0000-0000-0000-000000000000}-{00000000-0000-0000-0000-000000000000}. The HRESULT was 80070005.
Error    6/29/2009 7:22:41 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
Error    6/29/2009 7:19:31 PM    Service Control Manager    7032    None    "The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Server service, but this action failed with the following error:
An instance of the service is already running."
Error    6/29/2009 7:19:31 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x000000000000232c, process id 0xb98, application start time 0x01c9f8c04759c999.
Error    6/29/2009 7:18:27 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X xD Host Controller' (PCI\VEN_197B&DEV_2384&SUBSYS_30FB103C&REV_00\4&2a995034&0&0428) disappeared from the system without first being prepared for removal.
Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X MS Host Controller' (PCI\VEN_197B&DEV_2383&SUBSYS_30FB103C&REV_00\4&2a995034&0&0328) disappeared from the system without first being prepared for removal.
Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X SD Host Controller' (PCI\VEN_197B&DEV_2381&SUBSYS_30FB103C&REV_00\4&2a995034&0&0228) disappeared from the system without first being prepared for removal.
Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X SD/MMC Host Controller' (PCI\VEN_197B&DEV_2382&SUBSYS_30FB103C&REV_00\4&2a995034&0&0028) disappeared from the system without first being prepared for removal.
Error    6/29/2009 7:17:27 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x0000000000002339, process id 0xff8, application start time 0x01c9f8c023973749.
Error    6/29/2009 7:16:26 PM    SecurityCenter    6    None    The Windows Security Center Service was unable to load instances of AntiSpywareProduct from WMI.
Error    6/29/2009 7:16:20 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x000000000000232c, process id 0x1c4, application start time 0x01c9f8bf81c900ad.
Error    6/29/2009 7:14:34 PM    Service Control Manager    7000    None    "The Norton Internet Security service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion."
Error    6/29/2009 7:14:34 PM    Service Control Manager    7009    None    A timeout was reached (30000 milliseconds) while waiting for the Norton Internet Security service to connect.
Error    6/29/2009 7:14:34 PM    Service Control Manager    7000    None    "The GSRestartSvc service failed to start due to the following error:
The system cannot find the file specified."
I can attach Full events if want. Is this problem comes due to an hardware or OS error? Pls help.
Thanks.

I own two of the dv4-1275mx laptops. Both machines were purchased around June of 2009 from Best Buy, and both machines are doing the same thing as what has been described here. It appears that this model has a flaw, or certain production runs have this flaw. I have done an exhaustive amount of research about this problem and know quite a bit about it.
But, good luck getting HP's Customer No-Service department to actually fix the problem. If you try to get them to fix it, you are about to be taken for quite a ride. They have been absolutely no help in diagnosing the problem, and I am still trying to get them to acknowledge and fix the problem with these laptops.
The problem is with the hard disk controller. It happens both with the built-in hard disk drive and with an external disk drive. It occurs whenever you place a significant load on the disk controller. When the problem occurs, the machine will lock up for 60 seconds at a time. Eventually, the driver times out, resets the disk, and drive activity continues until it happens again.
Normally, the problem is very intermittent because normal usage of the machine doesn't always trigger this problem. However, I have been able to replicate the problem consistently using a backup program called Macrium Reflect (free edition). If I use Macrium Reflect to back up or restore the hard disk image using an external disk drive plugged into the eSATA port, then the ATAPI errors in the log appear immediately after it begins copying data. Eventually, the backup will fail.
The worst part about this is the data corruption. If the lock-up condition occurs when a disk write is happening, then the data being written will get corrupted and you will lose data. I have had disks that have gradually gotten so corrupted that they won't boot anymore. I have spent a countless number of hours backing up, restoring, and attempting to use the machine despite these problems.
After doing further research and testing, it appears that this type of problem is not uncommon to the AMD M780G / ATI Radeon 3200 chipset that these laptops use. If you search the Internet for this type of error, you will find a number of HP and Non-HP customers complaining about this same issue with this chipset on different machines. This leads me to believe that the problem might be with the chipset itself.
I have attempted to find a software remedy to the problem with no success. This included trying all of the following:
- Trying Windows Vista 64 with various configurations of service packs and updates.
- Using the Microsoft AHCI driver and the ATI-supplied AHCI driver for the Radeon 3200 series
- Using different BIOS revisions
- Trying to find a magic combination of AHCI driver and BIOS revision that would work
- Trying various settings for disk write caching
- Turning of DMA on the controller
- Uninstalling every piece of HP-supplied software that I could think of that might have even the slightest possibility of interfering with the hard disk controller
None of this worked. Eventually, I concluded that this is a hardware problem that isn't going to get fixed through software.
Sadly, after doing all of this research, HP has not been helpful with getting this problem fixed. In the past, I have owned laptops from Dell and Toshiba, and while I know that no manufacturer is perfect, I have not had many issues getting prompt and reliable service from either of those two companies when I needed it. This is the first time I have purchased an HP laptop. And after the customer no-service experiences I have had, it is likely to be the last time I purchase an HP laptop.
HP's technical support seems to think that re-imaging the drive to reset the machine to factory defaults cures all problems. Over the phone, they have made me do this a couple of times, insisting that the problem is a result of a virus or something I installed on my machine.
Recently, I sent both of my laptops to them for service. To assist them, I included the details of all of the research that I had done. I gave them copies of this information both electronically, and included inside the box with the laptop. The information had details on the steps that I tried, and links to websites documenting problems with the M780G chipset. It also had details on how to replicate the problem with Macrium Reflect. I even re-imaged the machine back to the factory image, and installed Macrium Reflect for their convenience. And what did HP's service department do? They re-imaged the hard drive again and sent it back to me without even bothering to run my test! This is just absolutely moronic. Either the service technician can't read, or the service technician just doesn't care about fixing customer problems!
My complaints about HP's service are as follows:
There is no sense of urgency about fixing problems. I have been enduring this issue for 9 months now. But no one seems to care.
It takes forever for them to turn around machines in their service department. With Dell, I used to have a working laptop in my hands in 5 days, tops. What's worse is that they ship the packages via FedEx Ground with signature confirmation. (If you work a normal day job, good luck trying to get your package from FedEx Ground, which is only open when I am at work.)
The telephone and online support personnel often don't listen to you, and the details of problems don't ever seem to be recorded anywhere. I have had to explain this problem over and over for various people who seemed almost completely ignorant about the problems I have been experiencing.
The technicians are not competent, even when you tell them what needs to be fixed.
As far as I am concerned, HP has not been honoring the warranty on my machines. This is has been frustrating beyond words. I am at the point where I just want two new laptops without this chipset, but I seriously doubt I will ever get that. To all of you who are experiencing the same issue as I am, I wish you the best of luck in getting HP to resolve this problem--you are going to need it!

Hard Drive Highest Activity time 100%

Hello. I own a Portege R835-P94. I was using it normally, just surfing the web and suddenly it turns really slow and unresponsive. I noticed that the hdd led stays green (not blinking, just solid green) and I opened task manager trying to find the problem. No processes were usign so much resources but in the resource monitor the disk activity shows some abnormality. The highest activity time was 100%. I restart my laptop and the problem was gone for a couple of minutes but it came back again and this time a blue screen error appeared.
I attache an image that shows the activity of the disk in wich you can see a peaks of activity time. Each time it reaches 100% the hard drive make an abnormal sound.
Is a 640GB disk with 454GB free space.
I have desfragmented the disk, chek for erros but nothing works. I hope some of you can help me.
(sorry for my bad english)
Attachments:
resources.png ‏76 KB

Portege R835-P94
Show us the whole path, so we can see the file name.
a blue screen error appeared
And attach the corresponding *.dmp file from the C:\Windows\Minidump folder.
-Jerry

Windows Randomly Freezes when Resource Monitor Disk Highest Active Time Maxed Out

I'm getting this same problem as this person:
http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4e33c8d9-fc3d-434b-8dd0-29965d1aa0a2
Except that it seems to happen at random. While playing a game, browsing the net or when it's just sitting idle.
Hard drive light goes solid, the blue line (% highest active time) in the resource monitor disk graph stays peaked at 100% but
relatively little or no hard disk activity.
My mouse is also usually still responsive.
Some apps will continue to work, but if I click on them they will usually become unresponsive, same goes if I attempt to click on the Windows Start button. If I'm playing a game, it will stutter or freeze and a .5-1 second sound clip will continuously loop
until it's done (meaning the hard drive light is no longer solid and blue line is no longer peaking).
It is also the same for me that occasionally the OS will freeze completely and I will need to hold down the power button to reboot, but this is usually more rare.
I've checked the Event Viewer and there are no errors that coincide with the problem.
I've run chkdsk and no errors were returned. Same when I ran Memtest86+ to check RAM, no errors.
My stats are:
-Windows 7 Ultimate 64 bit SP1
-Intel Core i-7 960 3.2Ghz
-eVGA 132-BL-E758-A1 X58 Motherboard
-Corsair Dominator 12GB TR3X6g1600C8
-eVGA 012-P3-1472-AR GeForce GTX 470 (Fermi) SuperClocked 1280MB 320-bit GDDR5 (x2 SLI)
-CORSAIR HX Series CMPSU-850HX 850W ATX12V 2.3 / EPS12V 2.91 80 PLUS SILVER Certified Modular PSU
-VelociRaptor WD3000HLFS 300GB 10000 RPM 16MB Cache SATA 3.0Gb/s HDD (x2 RAID 0)

Hi,
How about updating the BIOS and all devices' driver from the manufacture's site?
I suspect it is the task schedule running in the background. If you want to narrow down the issue, you may need some monitor tools and then analyze.
http://technet.microsoft.com/en-us/sysinternals/bb896645
To analyze the process, it is better to contact Microsoft Customer Service and Support (CSS) via telephone to get more efficient support.
Microsoft Customer Service (800) 426-9400 is available Monday through Friday, from 6:30 A.M. to 5:30 P.M. pacific time.
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to improve the activation time for a standard DSO

Hi all,
I'm facing an issue related to the activation of a DSO. The SM37 log is as follows....
12:03:16 Job started
12:03:16 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
12:03:20 Attivazione is running: Data target ZFIZIASA, from 93,627 to 93,627
12:18:00 Overlapping check with archived data areas for InfoProvider ZFIZIASA
12:18:00 Data to be activated successfully checked against archiving objects
12:18:02 Status transition 2 / 2 to 7 / 7 completed successfully
12:18:13 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218130
12:18:19 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218190
12:18:20 Parallel processes (for Attivazione); 000003
12:18:20 Timeout for parallel process (for Attivazione): 000300
12:18:20 Package size (for Attivazione): 020000
12:18:20 Task handling (for Attivazione): Processi batch
12:18:20 Server group (for Attivazione): Nessun gruppo di server config
12:18:20 Activation started (process is running under user BWREMOTE)
12:18:20 Not all data fields were updated in mode "overwrite"
12:18:20 Process started
12:18:20 Process completed
12:18:20 Activation ended
Please have a look into the bold 3rd & 4th line. I couldnt able to analyse where the issue is and what to do to minimize the time for activation.
It is very challenging, please reply!
Please help.
Thanks in adv.
Ajay

Hi Kundan,
Thanks for the response!
Actually, I have two identical DSO, having all the char & KF same and feeding the data from same DS at the same time but the issue is...
1) For 1st DSO, Activation log....
01.07.2010 02:02:41 Job started
01.07.2010 02:02:41 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
01.07.2010 02:02:46 Attivazione is running: Data target ZFIZIASA, from 93,751 to 93,751
01.07.2010 02:19:27 Overlapping check with archived data areas for InfoProvider ZFIZIASA
01.07.2010 02:19:27 Data to be activated successfully checked against archiving objects
01.07.2010 02:19:27 Status transition 2 / 2 to 7 / 7 completed successfully
01.07.2010 02:19:28 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICC6UMXYT00Z2DYOQV8QL8CJ with ID 021
01.07.2010 02:19:30 Parallel processes (for Attivazione); 000003
01.07.2010 02:19:30 Timeout for parallel process (for Attivazione): 000600
01.07.2010 02:19:30 Package size (for Attivazione): 020000
01.07.2010 02:19:30 Task handling (for Attivazione): Processi batch
01.07.2010 02:19:30 Server group (for Attivazione): Nessun gruppo di server config
01.07.2010 02:19:30 Activation started (process is running under user BWREMOTE)
01.07.2010 02:19:30 Not all data fields were updated in mode "overwrite"
01.07.2010 02:19:30 Activation ended
2) For 2nd DSO, the activation log is..
01.07.2010 02:01:13 Job started
01.07.2010 02:01:13 Step 001 started (program RSPROCESS, variant &0000000006947, user ID BWREMOTE)
01.07.2010 02:01:35 Attivazione is running: Data target ZFIGL_02, from 93,749 to 93,749
01.07.2010 02:01:43 Overlapping check with archived data areas for InfoProvider ZFIGL_02
01.07.2010 02:01:43 Data to be activated successfully checked against archiving objects
01.07.2010 02:01:53 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015300
01.07.2010 02:01:54 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015400
01.07.2010 02:01:56 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015600
Now my client is asking to lower the activation time for 1st one as it is taking for 2nd one.
I'm toatally blank now that what & how to do it!
The volume of data ...
ZFIZIASA
Active table - Number of entries: 13.960.508
Change Log Table - Number of entries: 13.976.530
ZFIGL_02
Active Table - Number of entries: 21.923.947
Change Log table - Number of entries: 21.938.657
Thanks,
ajay
Edited by: sap.ajaykumar on Jul 6, 2010 1:47 PM

100% disk active time, how to analysis the reasons

my server has only run on low workload, but get 100% active time, how can i determine which program cause it , thanks,
server 2012R2, latest update

Hi SpaceTime_L,
The IO performance issue can caused by many reasons, generally we can first run CHKDSK to check whether have bad sectors. Other information from your figure it show the response
time is very high this is also a serious I/O bottleneck, please first check whether have misaligned disk partitions, it also is the common issue can cause unnecessary disk I/O at the hardware level for disks.
You can refer the following related article to do the further troubleshooting.
PerfGuide: Analyzing Poor Disk Response Times:
http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
Monitoring Disk Usage:
http://social.technet.microsoft.com/wiki/contents/articles/3214.monitoring-disk-usage.aspx
PerfGuide: Analyzing Poor Disk Response Times:
http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
How to Monitor Disk Performance with Performance Monitor:
http://support.microsoft.com/kb/102020
DISK_PERFORMANCE structure:
http://msdn.microsoft.com/en-us/library/windows/desktop/aa363991(v=vs.85).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Minimum activation time for new phone

I recently got an iPhone 4S. One of the camera apps I use frequently is busted on the 4S but works fine on the iPhone 4, which is what I had previously.
I'd like to re-activate my iPhone 4 until the developers get around to fixing the camera app (it's Hipstamatic for anyone who's curious).
My question: when you get a new phone, does it have to be active for a minimum amount of time? I know the phone has to be activated within 5 days of purchase, but once it's activated does it need to stay active for a certain number of days or weeks?

If you purchased the phone directly through Verizon, you can deactivate it immediately if you like. I don't think the iPhone is being sold through third-party retailers yet (if it ever will be), so you should be fine.
For future reference, if you do buy through a third-party (like Amazon, or Wirefly), they can ask you to sign a second contract directly with them. That contract may require the phone to stay active for at least 180 days with the same plan, or you will owe that retailer an Early Termination Fee.

Extend activation time for replacement phone

I am away from home and my replacement phone just arrived today. Is there any way to extend the activation period? According to the box, the activation period is only 5 days, but I will not be home until the weekend. Please help~

@joeyc1223,
As long as you return the phone within 5 days of activating the replacement device you have nothing to worry about. We ask that you activate the replacement phone as soon as you're back home and returning the defective phone. If it will be more than a week before you get a chance to activate the phone, I suggest you contact us so we may remark your account.
Hope this information is helpful.

100% Activity time of hard disk in HP 1000-1140tu .

Hi Everyone
HP 1000-1140tu notebook with 500GB (Toshiba MQ01ABD050 ) , 2GB Ram ddr3 and core i3 processor. This machine has 100% Activity time for hard disk and average response time is always above 1200ms. Mostly system get stucks for 2-3 minutes.
I have re-installed windows 7 and windows 8.1 64bit versions and format the hard drive but issue is not fixed.Also i have updated bios to latest version. Does anybody know about this issue?
I have two suppositions about this issue :
1. Hard drive controlller issue
2. Hard drive connectors issue

Hello @Hp1000TU ,
Welcome to the HP Forums!
I understand you have 100% disk usage on your notebook at all times.
Let's start by optimizing the hardware performance on your notebook by changing the power plan to High Performance.
You can also try running a disk check for corruptions on the drive, and have the computer try to fix them. To do this I suggest booting the notebook into safe mode with command prompt, and then running the following command:
chkdsk /b /v /x C:
Let me know the results of the check disk or if the power plan resolved the issue.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

User Exit EXIT_SAPLV60B_002 not accurate 100% of the time

Hi.
we use the above user exit to bring the delivery # to the customer & gl lines of an accounting document. this works 100% of the time for the gl line (user exit EXIT_SAPLV60B_004), but not 100% of the time for the customer line (user exit EXIT_SAPLV60B_002).
below is the include & code we have. does anyone have suggestion as to how the customer line can be accurate 100% of the time?
INCLUDE: ZXVVFU02
CODE: Read table CVBRP index 1. XACCIT-XREF1 = CVBRP-VGBEL.
thx

You requirement is to check the constrain based on scheduling . THere is not user exist I believe that may exaclty address your requirement. THan also check below two user exit.
CNEX0028 Check activity release
CNEX0029 Check network release
Ideally yhou should chekc for hte some BAPI for hte network save will help you .
Regards
Nitin P.

Hard Drive Active Time spikes at 100%

Hello, so recently I have been having some issues with my PC. At first, around 2-3 months ago my pc started lagging. I checked my task manager and noticed that my active time on my HDD spiked to a 100% and stayed there for about 5 minutes before going back to normal. I didn't think much of it at the time. But now, the explorer.exe started crashing and my HDD seems to be spiking from around 30 to 100% every few seconds. I tried scanning all the files with Kaspersky, chkdsk /r, I tried disabling the BITS from the service as some people suggested, nothing helps :/ Any ideas of what could be causing this?
Specs:
Intel i7 4770
Radeon r9 290
16gb RAM
HDD - Seagate ST2000dm001-1ch164

Hello @Ridas14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop computer's hard drive active time spikes to 100% frequently, and I would be happy to assist you in this matter!
Does this issue occur if you boot your computer in Safe Mode? What programs are active when this issue occurs? In the meantime, I recommend following the steps in this document on Resolving Slow System Performance (Windows 8). This should help improve the speed and efficiency of your operating system.
Additionally, I also suggest following this resource on Computer Locks Up or Freezes (Windows 8), which should help prevent your system's programs from crashing.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Transaction type 100 cannot be used for activity 'Acquisition from invoice'

Hi
My user got the error message : Transaction type 100 cannot be used for activity 'Acquisition from invoice receipt w/ affil. comp.'
when post the invoice via MIRO t code for 98% of the total amount.
The posting was is related to affiliated company, & by right it should pick transaction type 153 but it is pointing to 100.
If user post 100% , no error.
Please advice.

Check any of the following notes:-
=> Note 972556 - MIRO: Incorrect movement type with affiliated companies
=> Note 1060719 - Error AAPO 176 for postings from Logistics without vendor
thanks
G. Lakshmipathi

User login report in Active Directory for specific date and time

I want to get User login report in Active Directory for specific date and time e.g user logged in at15-01-2015 from 8:00am to 4:00pm
Is any query, script or any tool available?
Waiting for reply please

You can identify the last logon date and time using my script here: https://gallery.technet.microsoft.com/scriptcenter/Get-Active-Directory-User-bbcdd771
If you would like to get back in time and see when the user did a logon / logoff then you need to have auditing enabled. Once done, you can records from Security log in the event viewer: https://social.technet.microsoft.com/Forums/windowsserver/en-US/98cbecb0-d23d-479d-aa65-07e3e214e2c7/manage-active-directory-users-logon-logoff-events
I have started a Wiki about how to track logon / logoff and it can help too: http://social.technet.microsoft.com/wiki/contents/articles/20422.record-logon-logoff-activities-on-domain-servers-and-workstations-using-group-policy.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

HT5624 when I turn my iMassage on it will go to activation mode for along time and then fails Whats teh problem ?!!

when I turn my iMassage on, it will go to activation mode for a long time and then fails. Whats the problem ?!!

Do you have a texting plan and are you connected to data when you try to activate? Check this support document for trouble with activating iMessage. http://support.apple.com/kb/TS4268

100% highest active time for HDD

Similar Messages

Maybe you are looking for