10G em not starting

Hello Gurus,
I am very new to oracle 10G 1.1 on RHEL4. My problem is that at the time/session in which is installed I was able to log into the em by typing http://localhost.localdomain:1158/em. But after restarting the machine I am not able to log into em. I am getting the following message.
The connection was refused when attempting to contact
localhost.localdomain:1158.
Pl. guide me how to resolve the problem.
Thankyou
Neeraj

Sir
Here are the last few lines from emoms.log
<pre>
oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
     at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
     at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
     at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
     at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
     at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
     at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
     at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
     at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
     at oracle.sysman.emdrep.receiver.OMSHandshake.getParameterFromDB(OMSHandshake.java:387)
     at oracle.sysman.emdrep.receiver.OMSHandshake.getMaxAgentCompatVer(OMSHandshake.java:369)
     at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:794)
     at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:648)
     at oracle.sysman.emdrep.receiver.FxferRecv.doGet(FxferRecv.java:658)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
2008-07-16 02:57:50,236 [HttpRequestHandler-27503148] ERROR eml.OMSHandshake getParameterFromDB.402 - Io exception: The Network Adapter could not establish the connection
2008-07-16 02:57:50,237 [HttpRequestHandler-27503148] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://localhost.localdomain:3938/emd/main)(ERROR = INTERNAL_ERROR)
2008-07-16 02:57:50,619 [CacheManager] ERROR cache.CacheManager run.519 - Exception message: sleep interrupted
java.lang.InterruptedException: sleep interrupted
     at java.lang.Thread.sleep(Native Method)
     at oracle.sysman.emSDK.svc.cache.CacheManager$Checker.run(CacheManager.java:507)
     at java.lang.Thread.run(Thread.java:534)
</pre>

Similar Messages

Report Builder 10g does not start on Windows 7 (stays minimized)

When i run the report builder 10g in my Windows 7 machine, the splash screen appears for some time and then it minimizes to the task bar. Thinking that it has loaded and gone to task bar, if i click the icon on task bar, it shows another splash screen and loads another copy of Report Builder, which also minimizes to same icon.
On right-clicking the icon there is no maximize button. I tried running it as administrator and also fix the compatibility, but nothing worked.
This issue starts only after some days of installing the developer 10g. It worked ok for some days and then it started behaving like this. Seen this twice now, both times on re-installing the developer suite the issue goes away.
Is there any way to solve this other than re-install the Oracle Developer ?

Hello,
Did you check the files cagprefs.oar and cauprefs.ora ?
Re: report builder
regards

Jdeveloper 10g UI not starting.

Hi All,
I'm a new user of jdeveloper and using 10g.
This is the problem which is happening everytime I start it second time after fresh installation. It works fine for the first time and shows problem and never loads in the subsequent attempts.
I have installed it in E directory following is the path of .exe file which I run E:\Jdev10g\jdev\bin\jdev.exe
Following is the logs which I have got from command window---
java.lang.NullPointerException
at javax.swing.border.EmptyBorder.<init>(EmptyBorder.java:54)
at com.sun.java.swing.plaf.windows.WindowsTableHeaderUI$XPDefaultRendere
r.getTableCellRendererComponent(WindowsTableHeaderUI.java:63)
at javax.swing.plaf.basic.BasicTableHeaderUI.getHeaderRenderer(BasicTabl
eHeaderUI.java:394)
at javax.swing.plaf.basic.BasicTableHeaderUI.getHeaderHeight(BasicTableH
eaderUI.java:428)
at javax.swing.plaf.basic.BasicTableHeaderUI.createHeaderSize(BasicTable
HeaderUI.java:454)
at javax.swing.plaf.basic.BasicTableHeaderUI.getPreferredSize(BasicTable
HeaderUI.java:485)
at javax.swing.JComponent.getPreferredSize(JComponent.java:1275)
at javax.swing.ViewportLayout.preferredLayoutSize(ViewportLayout.java:75
at java.awt.Container.preferredSize(Container.java:1178)
at java.awt.Container.getPreferredSize(Container.java:1162)
at javax.swing.JComponent.getPreferredSize(JComponent.java:1277)
at javax.swing.ScrollPaneLayout.preferredLayoutSize(ScrollPaneLayout.jav
a:507)
at java.awt.Container.preferredSize(Container.java:1178)
at java.awt.Container.getPreferredSize(Container.java:1162)
at javax.swing.JComponent.getPreferredSize(JComponent.java:1277)
at java.awt.BorderLayout.preferredLayoutSize(BorderLayout.java:572)
at java.awt.Container.preferredSize(Container.java:1178)
at java.awt.Container.getPreferredSize(Container.java:1162)
at javax.swing.JComponent.getPreferredSize(JComponent.java:1277)
at javax.swing.plaf.basic.BasicSplitPaneUI$BasicHorizontalLayoutManager.
getPreferredSizeOfComponent(BasicSplitPaneUI.java:1770)
at javax.swing.plaf.basic.BasicSplitPaneUI$BasicHorizontalLayoutManager.
getPreferredSizes(BasicSplitPaneUI.java:2003)
at javax.swing.plaf.basic.BasicSplitPaneUI$BasicHorizontalLayoutManager.
resetToPreferredSizes(BasicSplitPaneUI.java:2040)
at javax.swing.plaf.basic.BasicSplitPaneUI$BasicHorizontalLayoutManager.
layoutContainer(BasicSplitPaneUI.java:1470)
at java.awt.Container.layout(Container.java:1020)
at java.awt.Container.doLayout(Container.java:1010)
at java.awt.Container.validateTree(Container.java:1092)
at java.awt.Container.validateTree(Container.java:1099)
at java.awt.Container.validateTree(Container.java:1099)
at java.awt.Container.validateTree(Container.java:1099)
at java.awt.Container.validateTree(Container.java:1099)
at java.awt.Container.validateTree(Container.java:1099)
at java.awt.Container.validateTree(Container.java:1099)
at java.awt.Container.validateTree(Container.java:1099)
at java.awt.Container.validateTree(Container.java:1099)
at java.awt.Container.validateTree(Container.java:1099)
at java.awt.Container.validate(Container.java:1067)
at java.awt.Window.show(Window.java:461)
at java.awt.Component.show(Component.java:1133)
at java.awt.Component.setVisible(Component.java:1088)
at oracle.ideimpl.MainWindowImpl$11.run(MainWindowImpl.java:718)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
System configuration is "Intel core-2-duo" with 2 gb memory.
after this it hangs and never loads...please suggest solution for this..I'm quite fed up of this.

See if these old posts help-
cannot start JDeveloper 10g: nullpointer exception
http://programming.itags.org/development-tools/17231/

Oracle 10G Non-Network install - OEM will not start when on the LAN.

Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13

I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

Oracle 10g not starting after upgarde

Hi,
   Oracle not starting after upgrade and this service not starting automatically . This is error giving in the event viewer
Description:
The OracleDEV102iSQL*Plus service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Cheers
Murali

Hi,
I cannot explain what went wrong.
The error indicate that the upgrade is not finished or an error happened during the upgrade.
Please, review the alert log and the upgrade logs.
There are some possibilities:
- First one is to finish the upgrade to Oracle 10.2 manually. Please, check the Metalink notes:
Note 316889.1 - Complete checklist for manual upgrades to 10gR2
    Note:420146.1 - What is the Best Way to Upgrade to 10g?
- Second option is to restore the database to a point before the upgrade. In this case, you have to use the Oracle 9.2 software as well and need to restart the upgrade from the beginning.

Oracle database not starting up in oracle 10g RAC

Hi!
Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
Thanks & Regards
Srikanth MVS

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

Oracle 10G R2 AS: Not starting up; please help

i got a server with oracle 10g app server installed on it. i opened the console at http://localhost:1811/emd/console and created a new OC4J instance but did not deploy the EAR file. When i tried to open the console the next day the page did not open. actually the server did not start at the startup. i tried to start the server from the Services but it did not start. please help me to rectify the problem.

If your application server is in windows,then open command promt. and then type cd $ORACLE_HOME\bin
and then emctl.bat start iasconsole
If your application server is in unix/linux,then open console. and then type cd $ORACLE_HOME/bin
and then emctl start iasconsole
It will start your OEM. then through ur OEM u can monitor ur server configuration.

Oracle application server 10g enterprise manager is not starting

Hi all,
Pls. help me, our OAS 10g's enterprise manager is not starting whereas AS is up & opmn is also running.
Can anybody has idea?.Thanks in advance.

hi Kamran,
Please remember to always give some details about what product/ type/ version/ platform are you working with. this does not leave others to wait for divine revelation or mortal guessing;
also on reporting errors, please provide exact error(s) with error codes as you see and not the error described in your words. that helps clearly understand the problem.
about current problem, please tell us what did you expect to see and what did you exactly get.
and Roberto is right, check the version in %ORACLE_HOME%\config\ias.properties.
regards,
AMN

In Oracle 10g, iSQL* Plus Application Server is not starting

I have Windows XP OS, installed Oracle 10g.
But Finally OracleOraDb10g_home1iSQL*Plus is not starting.
I had looked in windows services OracleOraDb10g_home1iSQL*Plus status is in Starting. Not Starting
How to solve this problem, Because two or three client systems want to access this oracle iSQL*Plus through browser.
Not Working

I Tried this:
C:\oracle\product\10.1.0\db_1>%ORACLE_HOME%\jdk\bin\java.exe -Djava.awt.headless
=true -Xrs -Doracle.oc4j.localhome=%ORACLE_HOME%\sqlplus -Djava.security.propert
ies=%ORACLE_HOME%\oc4j\j2ee\home\config\jazn.security.props -jar %ORACLE_HOME%\o
c4j\j2ee\home\oc4j.jar -config %ORACLE_HOME%\oc4j\j2ee\isqlplus\config\server.xm
l
05/11/20 12:49:54 Copying default deployment descriptor from archive at C:\oracl
e\product\10.1.0\db_1\oc4j\j2ee\oc4j_applications\applications\isqlplus/META-INF
/orion-application.xml to deployment directory C:\oracle\product\10.1.0\db_1\oc4
j\j2ee\isqlplus\application-deployments\isqlplus...
05/11/20 12:49:54 Auto-deploying isqlplushelp (New server version detected)...
05/11/20 12:49:55 Auto-deploying file:/C:/oracle/product/10.1.0/db_1/oc4j/j2ee/h
ome/applications/dms0/ (New server version detected)...
05/11/20 12:49:55 Auto-deploying file:/C:/oracle/product/10.1.0/db_1/oc4j/j2ee/h
ome/default-web-app/ (New server version detected)...
05/11/20 12:49:55 Auto-deploying file:/C:/oracle/product/10.1.0/db_1/oc4j/j2ee/h
ome/applications/dms/ (New server version detected)...
05/11/20 12:49:55 Copying default deployment descriptor from archive at C:\oracl
e\product\10.1.0\db_1\oc4j\j2ee\oc4j_applications\applications\isqlplus\isqlplus
/WEB-INF/orion-web.xml to deployment directory C:\oracle\product\10.1.0\db_1\oc4
j\j2ee\isqlplus\application-deployments\isqlplus\isqlplus...
05/11/20 12:49:55 Auto-deploying iSQL*Plus (New server version detected)...
05/11/20 12:49:55 Auto-deploying file:/C:/oracle/product/10.1.0/db_1/oc4j/j2ee/o
c4j_applications/applications/isqlplushelp/isqlplushelp/ (New server version det
ected)...
05/11/20 12:50:00 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)
initialized
what happened means for 15 minutes, it does not process itself. So i gave
^C
Still It is not started

My Oracle 10g XE does not start anymore on Win XP

Hello,
I have a problem I do not understand at all. I've successfully installed Oracle10g XE on my Win XP SP2 about one year ago and every works well.
The last time (6 months ago) I've started my default XE, it works well.
Today, it does not works anymore ! My Windows service called "OracleServiceXE" does not start anymore. I have an error 1053.
So I try to start manually my DB using sqlplus :
sqlplus /nolog
connect / AS SYSDBA=> I obtains ORA-12560
The listener service starts well and seems to be OK.
I tried to set ORACLE_HOME and ORACLE_SID without success.
I checked my sqlnet.ora, tnsname.ora. Everything seems to be OK.
I stopped my antivirus software, stopped my firewall.
I checked I am still in the Adminstrator Group.
Finally, I tried to reinstall Oracle 10g XE and it does not work anymore either ! The XE instance creation failed
DIM-00019: service creation error
O/S-Error: (OS 1053)
Now, I am lost.
Does anybody have any suggestion to solve my problem ?
Many thanks by advance for any help you could give.
Regards
Cedric

Yes, I think so.
But what ? Many things change in 6 months (Windows fixes, software fixes, RAM upgrade, screen change ...)
And the logs I found in oracle cannot help me to have an idea.
Only listener.log, css.log and sqlnet.log have changed.
I have found the following error in sqlnet.log :
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleXE)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=XE)(CID=(PROGRAM=E:\Langage\oraclexe\app\oracle\product\10.2.0\server\BIN\oradim.exe)(HOST=PHOENIX)(USER=gerardce))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-FÉVR.-2008 09:28:04
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS : erreur d'adaptateur de protocole
ns secondary err code: 0
nt main err code: 530
TNS-00530: Erreur d'adaptateur de protocole
nt secondary err code: 2
nt OS err code: 0
I really don't knwo where to start. And I would like to be sure to save my data (via export or something like that).
Is it possible to have more trace somewhere that can help me ?
Regards,
Cedric

Oracle 10g Express Service not starting Database

I have a fresh download and install or Oracle 10gExpress and am having issues when I manually start the OracleXE service. The OracleXE Service starts, but the database does not. The error I see is ora-12560.
The database and service stops correctly if I manually stopthe OracleXE service. The start of the service just won't start the database.
The oradim.log contains
Thu Oct 15 11:51:30 2009
C:\oraclexe\app\oracle\product\10.2.0\server\bin\oradim.exe -startup -sid xe -usrpwd * -log oradim.log -nocheck 0
Thu Oct 15 11:51:31 2009
ORA-12560: TNS:protocol adapter error
New Information:
What I just found out was that it all works fine if the install of Oracle 10g Express is done prior to joining the Server to a domain. If the install is done after the server is part of a domain, the service will not start the database. If the install is done prior to putting the Server in a domain, the service will start the database.
Any help why this must be installed prior to adding the server to the domain?
Edited by: user10279386 on Oct 15, 2009 9:24 AM

Hi!
I think that installation must be done with Domain user who is Administrator on this machine also. Check ORA_DBA group that consist of at least two users: SYSTEM (who by default brings up the service, but you can change it) and your domain user (local Administrator on that server) who is making installation of XE on that server.
Hope this helps,
Damir

OEM not starting in 10G ...

HI,
While i am starting the oem it is saying below error:
D:\oracle\product\10.2.0\db_1\BIN>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://HIC-PCS0753:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleo
cl service is starting.
The OracleDBConsoleorcl service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
D:\oracle\product\10.2.0\db_1\BIN>NET HELPMSG 3534
The service did not report an error.
Please suggest how to proceed resolving the above error.
Thanks
Saurabh

Charlov wrote:
Hi,
I have an Oracle 10.2 environment on Unix and I am trying to start OEM from a client pc.
I connected through terminal sevices to the server and ran the following:
[oracle@stagedb oracle]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................... started.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
[oracle@stagedb oracle]$ emctl status dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
If, on the local machine, I type http://stagedb.wavemark.net:1158/em in internet exploerer, OEM does not start and gives me the following error:
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
More information
Hey its [https://stagedb.wavemark.net:1158/em] in 10.2.0.4
Try telnet to the port from you machine.
c:/>telnet stagedb.wavemark.net 1158
See if the port is open.
Regards.

OEM 10g not starting in explorer client

Hi,
I have an Oracle 10.2 environment on Unix and I am trying to start OEM from a client pc.
I connected through terminal sevices to the server and ran the following:
[oracle@stagedb oracle]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................... started.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
[oracle@stagedb oracle]$ emctl status dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
If, on the local machine, I type http://stagedb.wavemark.net:1158/em in internet exploerer, OEM does not start and gives me the following error:
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
More information
Any Ideas?
(I can ping the server from my pc)

Charlov wrote:
Hi,
I have an Oracle 10.2 environment on Unix and I am trying to start OEM from a client pc.
I connected through terminal sevices to the server and ran the following:
[oracle@stagedb oracle]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................... started.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
[oracle@stagedb oracle]$ emctl status dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
If, on the local machine, I type http://stagedb.wavemark.net:1158/em in internet exploerer, OEM does not start and gives me the following error:
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
More information
Hey its [https://stagedb.wavemark.net:1158/em] in 10.2.0.4
Try telnet to the port from you machine.
c:/>telnet stagedb.wavemark.net 1158
See if the port is open.
Regards.

Could not start EM 10g

Hi,
I have oracle App server 10g (Infra and mid tier) is one machine..
It was working fine, until i pressed the Enable/Disable Components in the EM infra home. Then I could not start Em at all.
Oracle Enterprise Manager 10g Application Server Control 9.0.4.0.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
Starting Oracle 10g Application Server Control ...The Oracleoh_infra_904ASContro
l service is starting...........................................................
The Oracleoh_infra_904ASControl service could not be started.
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
Please help me with this..where could the problem be.
Thanks a lot.

Hi,
I am still facing the same problem..Now i Start the Mid-tier EM using EMCTL. Now i'm getting a Null pointer exception whn accessing EM website
Wht could be the solution for this? Thanks.
Error:
java.lang.NullPointerException
     at oracle.cabo.servlet.xml.UIXPageBroker.getConfigurationName(Unknown Source)
     at oracle.cabo.servlet.ui.BaseUIPageBroker.getConfiguration(Unknown Source)
     at oracle.cabo.servlet.ui.BaseUIPageBroker.getService(Unknown Source)
     at oracle.cabo.servlet.xml.UIXPageBroker.getService(Unknown Source)
     at oracle.sysman.emSDK.svlt.EMServlet.initialize(EMServlet.java:406)
     at oracle.sysman.eml.app.Console.init(Console.java:200)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.loadServlet(HttpApplication.java:2094)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.findServlet(HttpApplication.java:4523)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2561)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:640)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)

Database not start with srvctl command in rac 10g

hi
when i change parameter in sqlnet file
SQLNET.AUTHENTICATION_SERVICES= (NTS) to SQLNET.AUTHENTICATION_SERVICES= (NONE)
then database is not started with srvctl utillity but started with sqlplus enviroment.
please help in this issue

user521214 wrote:
hi,
we are implementing security policy for our client. our databas is on RAC . As per the security, we need to revoke sys dba priviliges. when i used SQLNET.AUTHENTICATION_SERVICES=(NTS) in sqlnet.ora or SQLNET.AUTHENTICATION_SERVICES=(NONE). the instance not start with the following command in rac 10g.
$srvctl start database -d abc
$ crs_stat -t
Name Type Target State Host
ora.db.db application OFFLINE OFFLINE
ora....b1.inst application ONLINE OFFLINE hosttest01
Edited by: user521214 on Apr 21, 2011 4:08 AMIs this the only parameter you changed? What happens when you undo this modification?
What do you see on log files?

10G em not starting

Similar Messages

Maybe you are looking for