14/04/12 21:49:10 disconnectCallback called with reason: (null)

Hello
I have a macbook and I've replaced :
- the combodrive by a HDD 500Go Seagate
- the HD by a SSD (Kingston 60Go)
So I've put data and iTunes LIbrary on the storage HDD Seagate;
at the start, the HDD is mounted without problems but it's often dismounted by the system but I don't know why.
for example when I want synchornise the music with iTunes, so the disk is dismounted rapidly.
there is a conflict but which????
if you've an idea, thanks a lot.
bye

This might relate to you as you are using a Windows 2008 Server with Mac clients.
Apparently there seems to be an issue with SMB, since Microsoft rolled out SMB 2.0 with Windows 2008 Server. According to Microsoft, SMB 2.0 is supposed to solve world hunger and bring peace to the middle east, but in reality, it just puts up more road blocks for non-Microsoft platforms. Check out this article I found:
http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htm
Currently we have an issue with all 40 of our Macs not being able to save files properly to the Windows 2008 file server due to what the message claims to be a permission issue, but in reality it seems like something to do with the SMB protocol. We are investigating the issue and will see in a few days if the problem can be resolved by disabling SMB 2.0 on Windows 2008 Server.
Let us know if this problem resolves your problem as well. You never know how many other issues can be caused by a twitchy SMB protocol.

Similar Messages

[svn] 3937: FxContainer fix to make sure partRemoved/ partAdded are never called with a null instance.

Revision: 3937
Author: [email protected]
Date: 2008-10-28 17:37:25 -0700 (Tue, 28 Oct 2008)
Log Message:
FxContainer fix to make sure partRemoved/partAdded are never called with a null instance. In this case, in clearSkinParts(), we would call partRemoved() on all parts, whether they were there or not. This was causing a Thermo bug.
ASDoc fixes for Group, FxContainer, and FxDataContainer. Removing content property from ASDocs...this is not the recommended way to add items/remove items to Group/FxContainer. You should use the addItem/removeItem APIs. This is consistent with Flash Player and Halo. Under the hood someone can still set the content array, but it's discouraged because you could set two Groups to the same content array, which is hard to detect. Also, made currentContentGroup in FxContainer mx_internal...this is an implementation detail for us and something we may change later on. I also added some other ASDoc cleanups and fixes.
QE Notes: Ran checkintests and Mustella tests for gumbo/core/ and gumbo/components/FxDataContainer. Joann is updatating the one test that failed. WHen verifying SDK-17750, please also verify Thermo bug SDK-17800.
Doc Notes: This change includes ASDoc changes
Bugs: SDK-17750, SDK-17741, SDK-17756
Reviewer: Glenn
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17750
http://bugs.adobe.com/jira/browse/SDK-17800
http://bugs.adobe.com/jira/browse/SDK-17750
http://bugs.adobe.com/jira/browse/SDK-17741
http://bugs.adobe.com/jira/browse/SDK-17756
Modified Paths:
flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/components/FxContainer.as
flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/components/FxDataContainer .as
flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/components/Group.as
flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/components/baseClasses/FxC omponent.as

Revision: 3937
Author: [email protected]
Date: 2008-10-28 17:37:25 -0700 (Tue, 28 Oct 2008)
Log Message:
FxContainer fix to make sure partRemoved/partAdded are never called with a null instance. In this case, in clearSkinParts(), we would call partRemoved() on all parts, whether they were there or not. This was causing a Thermo bug.
ASDoc fixes for Group, FxContainer, and FxDataContainer. Removing content property from ASDocs...this is not the recommended way to add items/remove items to Group/FxContainer. You should use the addItem/removeItem APIs. This is consistent with Flash Player and Halo. Under the hood someone can still set the content array, but it's discouraged because you could set two Groups to the same content array, which is hard to detect. Also, made currentContentGroup in FxContainer mx_internal...this is an implementation detail for us and something we may change later on. I also added some other ASDoc cleanups and fixes.
QE Notes: Ran checkintests and Mustella tests for gumbo/core/ and gumbo/components/FxDataContainer. Joann is updatating the one test that failed. WHen verifying SDK-17750, please also verify Thermo bug SDK-17800.
Doc Notes: This change includes ASDoc changes
Bugs: SDK-17750, SDK-17741, SDK-17756
Reviewer: Glenn
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17750
http://bugs.adobe.com/jira/browse/SDK-17800
http://bugs.adobe.com/jira/browse/SDK-17750
http://bugs.adobe.com/jira/browse/SDK-17741
http://bugs.adobe.com/jira/browse/SDK-17756
Modified Paths:
flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/components/FxContainer.as
flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/components/FxDataContainer .as
flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/components/Group.as
flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/components/baseClasses/FxC omponent.as

Unable to answer calls with 3.0 OS

I posted this problem before with the 2.1 firmware here:
http://discussions.apple.com/thread.jspa?threadID=1722193
It appears to be even worse with 3.0, for me anyway. I just upgraded to 3.0 and out of my first 5 calls with it I had a hard time answering 4 of them. One of them was missed altogether. The slider just refused to slide. What can I say. I was so hopeful this would be fixed. Oh well.
BTW, my "sometimes successful workaround" (change the ringer switch position) didn't seem to help.

I have had this same problem. I had back on version 2, but thought it might be related to 3G phone being jailbroken. New 3GS does the same thing. Appears to happen mostly when the ringer is off. Sometimes the slider will move but everything stops with that, phone will not "pick up".
I also have used the same "sometimes workaround" flipping the ringer switch back and forth.

Weblogic app server wsdl web service call with SSL Validation error = 16

Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
     System.setProperty("javax.net.ssl.trustStore",”cacerts”);
     System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
     System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
     System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd);      System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1.     Do I create “cacerts” the correct order with right keeltool options?
2.     Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3.     Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4.     Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
     <wsp:Policy wsu:Id="TokenServices_policy">
          <wsp:ExactlyOne>
               <wsp:All>
                    <sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
                         <wsp:Policy>
                              <sp:TransportToken>
                                   <wsp:Policy>
                                        <sp:HttpsToken RequireClientCertificate="true"/>
                                   </wsp:Policy>
                              </sp:TransportToken>
                              <sp:AlgorithmSuite>
                                   <wsp:Policy>
                                        <sp:Basic256/>
                                   </wsp:Policy>
                              </sp:AlgorithmSuite>
                              <sp:Layout>
                                   <wsp:Policy>
                                        <sp:Strict/>
                                   </wsp:Policy>
                              </sp:Layout>
                         </wsp:Policy>
                    </sp:TransportBinding>
                    <wsaw:UsingAddressing/>
               </wsp:All>
          </wsp:ExactlyOne>
     </wsp:Policy>
     <wsdl:types>
          <xsd:schema targetNamespace="http://tempuri.org/Imports">
               <xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
               <xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
          </xsd:schema>
     </wsdl:types>
     <wsdl:message name="ITokenServices_GetUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
     </wsdl:message>
     <wsdl:portType name="ITokenServices">
          <wsdl:operation name="GetUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="TokenServices" type="tns:ITokenServices">
          <wsp:PolicyReference URI="#TokenServices_policy"/>
          <soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="GetUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="TokenServices">
          <wsdl:port name="TokenServices" binding="tns:TokenServices">
               <soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
               <wsa10:EndpointReference>
                    <wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
               </wsa10:EndpointReference>
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>

I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server.

Disable calls with video silently in jabber 9.2.6

Hello,
My company just bought Jabber 9.2.6 and as an application packager I was selected to create a package that installs Jabber completely silently. I have no problems with the installation but they gave me instructions to select the "Never start calls with video" option and I cannot find how to disable this silently anywhere. I found that for previous Jabber version this was set in the jabber-config.xml file but I cannot find it anywhere in the 9.2.6 install. I thought this maybe was set through the registry but couldn't find any registry keys for this either. the only configuration files I see in Jabber install folder are "log4cxx.properties", "jabber-config-defaults", "jabber-plugin-config", "jabber-ui-config", "plugin-config" and "StartupHandlerConfig". I couldn't find anything about calls with video in these files. Does anyone have any idea on how to enable this "Never start calls with video" option in Jabber 9.2.6 please?

Hi Gabriel,
you should follow instruction from CUCM docs :
Migration of Cisco Jabber Video SettingsIn Cisco Unified Presence Release 8.x, the Always begin with video muted setting is configured in Cisco Unified Presence Administration under Application > Cisco Jabber > Settings. This setting is not migrated during the upgrade to the current release. In the current release, this setting is configured in Unified Communications Manager as a Cisco Jabber Enterprise Parameter called Never start call with video. The default value for the Never start call with video setting is False. If you want to configure calls to not start with video, you must set the Never start call with video value to True in theUnified Communications Manager Enterprise Parameter configuration window.
And from Jabber side you should set StartCallWithVideo parameter in jabber-config.xml.
In short:
Admin should set Never Start Call with Video parameter to True.
Admin should set StartCallWithVideo option to False in jabber-config.xml.
Regards,
Nebojsa

How do I make a hands free call with the iphone 4s?

How do I make a hands free call with the iphone 4s? I have a bluetooth car device and when I try to talk through it (as I did with my old phone) to call someone it does not work. so far only hte last person called is redialed.

That is a carrier-based service. So first you have to make sure your service contract includes that feature.
It usually also includes Call Hold. So you call the first party, put them on hold, call the second, then reactivate the first. But only if your carrier allows you to.

Not able to make any call with my lumia 710

Not able to make any call with my lumia 710 though other then call everything is working fine. I chacked my SIM in other phone, i there phone i can make calls. Whats wrong with my phone?

hi
i am using nokia lumia since last 6 months. i am having aitel connection. till few days back i was able to make phone calls however now phone calls are immediately getting ended. i m able to send sms, receive calls and use intenel..problem presisits only with receiving call..
suggest me a way out..plz..

How can I have a call with someone from Customer Support if I live in Costa Rica? I have forgotten the answers to my security questions and basically I can't buy anything on iTunes. I do not have a rescue email account otherwise I won't be writing here.

I have been trying to fix this by myself but I gave up! I don't remember the answers I provided before. Tried to have a call with apple support but it seems that this is not an option if you live in Costa Rica. How am I supposed to spend the credit I have in my apple account?
Thank you... Pura vida!

As Costa Rica isn't on this page : http://support.apple.com/kb/HT5699
then try contacting Support via this form and explain that you've forgotten your answers, don't have a rescue email address, and your country isn't on the HT5699 page and see how they reply : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 .

Safari 5.1.4 update breaks SoftwareUpdate on 10.6.8 server IFJS_PropertyListConvertToType() called with type=3

New 10.6 server machine. (Actually 3 of them.) If we install every update offered in Software Update except safari 5.1.4 and machine is fine. Once the safari update is taken and the machine reboots, Software Update crashes a bit after launch. When running softwareupdate -l on the command line, the error is
Software Update Tool
Copyright 2002-2009 Apple
2012-03-14 14:25:19.763 softwareupdate[1631:4f0b] IFJS_PropertyListConvertToType() called with type=3
Segmentation fault
Anybody else seeing this?

The same here on two xserves!
Running SoftwarUpdate from the GUI!
Console says:
Software Update[24700]
Package Authoring: my.result.title and my.result.message not defined or empty
Software Update[24700]
IFJS_PropertyListConvertToType() called with type=3
com.apple.launchd[1]
(com.apple.suhelperd[24702]) Exited with exit code: 2
com.apple.launchd.peruser.501[24141]
([0x0-0x4b04b].com.apple.SoftwareUpdate[24700]) Job appears to have crashed: Segmentation fault
I also get a message like this from ServerAdmin every minute in console:
servermgr_info: unexpected Software Update state: crashed
The crashreport says:
Thread 7 Crashed: Dispatch queue: com.apple.root.default-priority
0   com.apple.JavaScriptCore                0x00007fff8795eff1 JSC::JSObject::defaultValue(JSC::JSObject const*, JSC::ExecState*, JSC::PreferredPrimitiveType) + 3921
1   com.apple.JavaScriptCore                0x00007fff8794fd6a JSC::JSCell::toPrimitive(JSC::ExecState*, JSC::PreferredPrimitiveType) const + 42
2   com.apple.JavaScriptCore                0x00007fff8781f387 cti_op_to_primitive + 55
3   ???                                     0x000025f96ea04573 0 + 41753233081715
4   com.apple.JavaScriptCore                0x00007fff877b1462 JSC::Interpreter::execute(JSC::ProgramExecutable*, JSC::ExecState*, JSC::ScopeChainNode*, JSC::JSObject*) + 2386
5   ???                                     0x00000001024ba9e0 0 + 4333480416
If full crashreport is required, I can mail it!
Any ideas to get Softwareupdate running again?
Greetings,
Peter

Safari 5.1.4 update breaks SoftwareUpdate on 10.6.8 server, on 2008 xserve, IFJS_PropertyListConvertToType() called with type=3

We've got 3 new-to-us 2008 xserves that we put into service last week. Installed 10.6, updated up to 10.6.8 and took all of the software updates up until Safari 5.1.4. Computers all work fine. Then take the safari update -- afterwards, SoftwareUpdate crashes a bit after launch, gui or command line. The error when you do it on the command line is "IFJS_PropertyListConvertToType() called with type=3".
Over on the osx snow leopard server discussion board, several other people are reporting that they have the problem but only with the 2008 xserve, the 2009 xserve is just fine. (No reports yet about the 2006 xserve.)
I have reported the bug to apple, and they asked for a crash report, which I gave them. It's bug #11048593 (not sure if those are publicly viewable...)

We’re having the same issue on our 2008-era Xserve, but not on our other Snow Leopard servers and clients.
Apple released an Apple Software Installer Update 1.0 release today which may address the problem. See http://support.apple.com/kb/DL1512 Needless to say, you need to install this update manually using the downloaded DMG.
I’ll be installing this update this evening on our systems to see if this resolves our issue.

Call with my own client to the real phone network

Hi, I've a shell script in Linux that I need to make calls and send text messages from. I write the program in any other language as well, but for the moment it's shell script. I've a microphone attached to the Linux computer that works. Do you understand the question ? If so, how is this done ?
EDIT: Need to be able to call with multiple instances. So I need to be able to call 5 different numbers at the same time.
Thanks
Envion

Having the same issue. Calls being made FROM my Maryland home landline TO a Virginia number.
I tried calling the number from my office phone, but it goes straight to an unoccupied voicemail.
When I first called about it, the Verizon representative also reassured me there was no charge for these calls, but that is not the issue. The issue is that someone or some machine has access to my home landline and it is making these calls. She was pretty insistent that it must be someone in my home, but much like others have stated, the records show that calls are made when no one is home, or when we are all home watching TV in the living room. We have one phone in the kitchen, so there are no secret calls being made. And certainly not 20+ times a month.
The first representative transferred me to another tech. At first, the new tech dismissed the idea that there could be cross-wiring (what the first tech suggested) because it's over the internet. There are no physical wires to cross.
The tech eventually ran a test and determined there was a "short bound in the wiring," so she said she was going to "reboot the ONC." I don't know what any of that means.
The test came back successful, and she was able to block the number (inbound and outbound).
I told both techs that this problem is not unique to my account; that there are several people on Verizon forums reporting the same issue.
She was not able to explain why, so we are no closer to figuring this out.
All I can recommend is calling Verizon tech support and having the number blocked. We'll see what happens with the next bill.
Also, if it's worth typing out, make sure you're reviewing your bills from Verizon. I've had to call at least five times in the 4.5 months about one thing or another.

Can't make Phone calls with Yosemite and iOS 8.1.1

I purchased two brand new Apple products: MacBook Pro with Retina display, and the new iPhone 6. I would love to use this new feature of making phone calls with my macbook but cannot seem to make it work. It keeps saying "iPhone and macbook has to be on the same wifi network" Which they are, I have followed the steps in preferences on my macbook and in my iPhone that will allow the use of these new features. Any help? Please it is frustrating to have something not work.

Handoff System preferences.
Handoff Continuity Troubleshooting

Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push

Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push. First smart phone I have owned and the old flip phone was much easier to answer.....just press one button.

Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push. First smart phone I have owned and the old flip phone was much easier to answer.....just press one button.

Cant reply to incoming call with text while on phone

Before IOS7 I could reply to an incoming call while on a call with a text " Cant talk right now I will call you later". With IOS7 that is not an option. I spoke with Apple tech support they said it was a Verizon issue. That Verizon has to update their system to be compatible with the update. I spoke with people who have iphone 5's with AT&T and Sprint and the have the same issue. This was a really nice feature and I wish it was someway to get it back. Can somebody help

I am not happy that they removed this feature either. Unfortunately, Apple seems to be changing many things for the worse since Steve Jobs is gone. User friendliness was a big priority to him, and this being one of those and also being efficient and possibly safer in the case that you may be on the phone and driving. You could, with one touch, let your second caller know that you were busy or you would call them back...this is not one of Apple's best decisions by far

Asynchronous SUBMIT or CALL WITH creation of NEW SESSION

I'm doing monotonous comparisons between systems, but I do need to see the SAP standard comparison for each. So I have an ALV list that I'd like to double click a line entry that will spawn 3 NEW SESSIONS and I'll automatically populate the parameters.
So, has anyone been able to SUBMIT or CALL WITH THE KEY BEING THAT IT MUST CREATE 3 NEW ASYNCHRONOUS SESSIONS. I'd be grateful if you'd share your experience in this regard. Thank you, Adrian

Hi,
You can try in this way.
Create a new FM and place your code there. Call this FM using addition STARTING NEW TASK. It should work fine.
Check out F1 help on CALL FUNCTION for more details and additions.
Thanks,
Vinod.

14/04/12 21:49:10 disconnectCallback called with reason: (null)

Similar Messages

Maybe you are looking for