#2 WVC210 no longer connects to wireless, otherwise OK

This is a new issue. My #1 WVC210 (purchased in 2010) stopped connecting wireless. Camera #2 (WVC210) connects wireless OK. #1 functions OK when wired. The wireless light on the camera appears to "search" for the router with no success - 10 to 15 seconds on, and 20 to 30 seconds off.
I would appreciate any suggestions.

Sounds like it lost the wireless configuration that allows it to connect to the wireless router. When it is hardwired can you still get into the GUI? If so, check the wireless info against what you use to connect to your wireless network. Let us know how that works.
Eric Moyers
Cisco Small Business Support Center
Advanced Network Support Engineer
Wireless and Surveillance SME

Similar Messages

TV no longer connects to wireless internet after installation of Airport Time Capsule

TV no longer connects to wireless Wi-Fi internet after installation of AirPort Time Capsule.

I am having a similar problem with a new TIme Capsule. The wifi on the Time Capsule was working fine for months with all devices, iPhone 4s, iPad Air, iMac Air, Mac mini, and vizio smart TVs. After a recent software update the Time capsule wifi no longer connects to the smart tvs or the iPhones. It still connects to the mac mini, iPad and iMac Air. I do NOT think the software update timing was just coincidental. But I have not found any information or other users confirming a similar problem on the Apple support site.

Can no longer connect to wireless router after upgrading to iTunes 9.2

My wireless connection was fine (using MacBook). After upgrading iTunes, I can not longer connect to router/modem wirelessly - am tethered with an ethernet cable. Spent 1 1/2 hours on phone with AT&T support reseting the passwords, security, etc. A PC laptop accepts password and can connect. My iPhone still can connect. But my MacBook (OS X 10.6) will not recognize my password for the modem/router. Everything has been re-booted and reset to original settings. Also, I received an iPad yesterday and it won't accept the password for our home wireless network. The password is correct because I am using it on other devices that are connecting to the network. Any ideas?

Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
Thanks for your help.
D

IBook can no longer connect to wireless network

I have a wireless network set up in my home using a Linksys wireless router. While it has worked fine in the past, I can no longer connect to it with my G4 iBook running 10.3.9. It shows up in my network connections with a strong signal but when I open a browser it can't connect to the internet. When I try to open 'Internet Connect' to explore the issue I get the spinning beach ball and have to Force Quit. When I open the network status window, I get a message for Airport that says "Airport is connected to the network 'name of my network'. Airport does not have an IP address and cannot connect to the Internet".
I have an iMac G5 connected to the router through ethernet cable and it works fine. I have an iMac G4 connected wirelessly to the same wireless router and it works fine. I have a Dell laptop that can also connect wirelessly to the wireless router with no problem.
It appears something is corrupt with the Internet Connect utility?
Any help or suggestions are greatly appreciated.
Thanks.
Doug

What type of IP address are you getting? If it starts with 169, it indicates that your iBook can not connect to the DHCP server provided by the router.
Have you enabled the MAC address filtering on the router? If so, remember that you must add the AirPort MAC address for your iBook.
If you have a correct IP address, perhaps it is a DNS issue. See KB 106798, Mac OS: Troubleshooting "A connection failure has occurred", "The specified server could not be found" or Similar Messages.

TS1398 ipod will no longer connect to wireless

My ipod will no longer connect you ATT wireless. It did before and my iPhone and iPad still connect jut fine. Any ideas why?

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

After 8.3 update, 5c no longer connects to wireless carrier!

After completing the 8.3 update, my iPhone 5c will no longer connect to my wireless carrier. I cannot receive or send calls. The only way I can text is if I'm connected to my WiFi. I took my phone to the store and they replaced the SIM card, which didn't help. I was advised to come home, backup to iCloud, reset the phone to factory settings, and see if that helped. I did that, and now I keep getting an error during phone setup saying "the activation server is temporarily unavailable." Now what do I do? They told me not to connect to iTunes on my computer because it could have stored "bad data" from a previous backup. Any suggestions would be very much appreciated. Thanks!

Hello RacerChick81,
Thanks for using Apple Support Communities.
The reason you were told to not plug in your iPhone into iTunes on your computer was to ensure you did not restore from a previous backup. In this instance you will likely need to put your iPhone into recovery mode and the plug it in to your computer. For further troubleshooting steps on this issue where you get an error that the activation server is unavailable, please follow the directions below.
Try these steps:
If your carrier provided a SIM card, make sure it's in your iPhone.
Restart the iPhone.
Try to reach the activation server another way, then try to activate.
Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
Try connecting to iTunes if you can't activate using Wi-Fi.
Restore the iPhone.
Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
If you're asked to enter a password to proceed with activating the iPhone, Activation Lock might be enabled as part of Find my iPhone.
Get help activating your iPhone - Apple Support
Have a good one,
Alex H.

HP Photosmart B209a no longer connecting to wireless since modem/router change

I recently had to change from a Motorola Surfboard modem and Netgear router (both at least 5 years old). The new modem/router combo is a C3700 Docsis 3.0. My HP Photosmart Plus printer model B209a no longer connects to the wireless network. I've tried both push button and pin. I get a WPS failed to connect. When I print network settings my network is listed but the printer shows as being offline with no active conection . Firmware is EIL1FNO926AR and shows up as the latest revision for the printer. Under 802.11 Wireless the mac address is given and status is disconnected. By the way, the printer and modem/router are approximately 3 feet apart on the same desk.
Any ideas as to what to do to get my printer back online or is incompatible with the new modem/router?
Thanks
This question was solved.
View Solution.

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

P2055dn no longer connects via wireless router

I recently replaced my wireless router, an ancient Airport Extreme, with a Linksys WRT120N, not exactly state of the art but still an improvement. At first I couldn't connect to my p2055dn, which I plugged into the router. It no longer showed up as a Bonjour printer when I tried to add it. Then I changed the network mode setting on the router from Wireless-N to Mixed, which got the printer to show up as a Bonjour printer. I then added it and all was well. Now, however, the printer is again not showing up at all. I can still print directly with an ethernet cable to the printer but not wirelessly. The only thing that has changed is that I had to reinstall OS X 10.10.3, but I don't see why that should have changed anything, particularly since the printer is no longer showing up on our other computers. My inclination is that the problem has to do with the router settings but maybe there's something I can configure on the printer to get it to play nice with the router? Any suggestions very welcome.

OK..
I don't know if this is going to work for all 3 of you or not. Josephlee this might work for you, since you have AT&T DSL. Then again, it might or might not work for any of you. I am currently a BellSouth DSL customer. I had to set my modem to "bridge mode" before being able to use my Linksys WRT54G to access the internet. I can't explain how to set your DSL modem to "bridge mode." Your internet service provider will have to do that. If any of you can get your modem set to "bridge mode" I can give you some advice...
If you can get your DSL modem (Verizon, AT&T, Bellsouth, etc.) set to "bridge mode" this should help you out. By setting your modem to bridge mode, this allows your Linksys router to control all internet access. Basically it opens up your DSL modem to allow any and all internet access straight through it, just like opening a water line. If your modem is set to bridge mode, let's continue...
Open Internet Explorer or whatever web browser you use. Go to http://192.168.1.1 to access your Linksys router's dialog. Hopefully you know the user name and password. The default (factory settings) are:
username: <<< leave blank
password: admin
If you make it this far..
You will be at the Setup/Basic Setup tab
Internet Connection type you want is PPPoE
User Name: is the current login for your DSL account
Password: is the current password for your DSL account
(Remember that your router [not DSL modem] is controlling your access)
Select: Keep Alive and leave default (Not Connect on Demand)
Click on Save (and follow on screen instructions)
Next navigate to the Status tab
Once there, you should see Login Status. It should be Disconnected.
Click the Connect button.
Click Save if prompted. (and follow on screen instructions)
Now.. close ALL browser windows.
Re-open your web browser and check for internet connectivity. Some computers may require a reboot. My Win XP Pro doesn't.
I pray that helps you guys out!

Printer will no longer connect to wireless router.

My printer won't connect to my router.....I disconnected a Vonage phone from my router, never touched the printer, but since disconnecting the phone, the printer no longer works....I've shut my cable box, router, computer and printer down and re-connected in that order....I've attempted multiple times to connect to the WPS from the printer both by pushbutton and PIN....and I've been unable to find anything on line to help with troubleshooting...any help would be appreciated. Thanks.

Hi @MKhelp
Thank you for reaching out to the HP Forums, I'd be happy to help you work towards getting your 3054 back online.
I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
Connect to the network that the printer is broadcasting. It is usually HP-setup-3054 and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
Go to the network tab along the top of the EWS.
Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
You have now completed the Wireless configuration, follow the next 3 steps to start printing.
The blue wireless light will go solid, put the Mac back on your own network.
Add the printer to the System Preferences.
Print
Please let me know if this resolves the issue. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printer no longer connecting to wireless network

I updated my wifi password so I had to reconnect all my wifi enabled devices. I decided to just go back to the original password b/c I had too many devices to update then all of a sudden my wireless printer stopped working. It kept telling me the printer is not connected. I have tried uninstalling and reinstallign the software. I have tried re-establishing the network connection on teh printer screen using the WPS button on eth erouter and the pin and they both just time out. When I run the diagnostics, it says FAIL next to Network Name (SSID) Found. It is no longer picking up my wireless signal from my router. Is there a way to manually enter the network information? I have tried to manually add the printer and it only comes up if I connect using the USB but not wirelessly anymore. When I called support they said it is becasue my printer is from 2010 and its not recognized anymore??? It was working fine a week ago, all I want to do is re-connect to my wireless network. HELP please! I have spent hours upon hours tryign to fix/figure out
I am working on a Macbook with OS Mavericks 10.9 Also I am not seeing all of the utilities in my HP folder that used to be there under my applications, after I ran the uninstall they are all gone.

Hey @tlpatlen,
Welcome to the HP Support Forum.
I understand you're having an issue with getting your HP Photosmart Plus All-in-One Printer connected to your wireless network. I would like to assist you with this and may have the steps you need to restore your connection.
Thank you for including the list of steps that you have already tried. While you have essentially tried all of what I would normally recommend and all of what's recommended here, there is another alternative.
Do you happen to own or have access to a Windows PC (XP to Windows 8.1 are supported for your printer)?
Even if it would mean borrowing a laptop from a friend to use in your home or office, there are more setup options available to you in this instance with PC access.
Assuming you have PC access, you could click here to download and install the Printer Install WIzard for Windows. When you run the Printer Install Wizard on a PC, you have the option of installing the printer via usb, and then converting the setup to wireless. The difference here is that if the PC doesn't automatically detect your SSID, you can enter it manually, along with the wireless password. As you have already discovered, with your current printer and Mac combination, there is no other way to manually input your SSID and WPA/WEP.
If you were able to gain PC access and complete the basic steps I have presented, the benefit to this setup, is that your printer will be connected to your wireless network and will hopefully retain this connection when you re-connect it once again to your Mac.
I hope this helps or at the very least, gives you a sense of what options remain. Please respond to this post with details if you have any further questions or concerns.
Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HP deskjet 3050 no longer connects to wireless since changing the router

The printer no longer prints to wireles or when connected via USB for that matter. Recently changed routers and now it doesn't pick up the printer. I have tried to reinstall the software and that hasn't made a difference. Help please!!

Hi nikki879,
Here is a way you can connect the printer to your router:
-Restore network defaults inside the wireless menu on the printer front panel.
-From your computer, connect wireless to the printer's network (it should be a name similar to HP-Setup-xx-Deskjet 3050A J611).
-After successfully connecting to the printer, open your web browser and type in 192.168.223.1 in the addressbar and press enter.
-Click on Wireless Setup Wizard
-Select your router and enter the password to connect the printer to the router.
Rerun the printer software from your computer to rediscover the printer over the network.
Show support by clicking the Thumbs Up in the post that resolved your problem. Doing so will help other forum members find their solutions too.

Apple TV 1st Gen can no longer connect to wireless networks

My Apple TV (1st Gen) has recently lost the ability to connect to either of our wireless networks at home. I rean the diagnostics at the reset screen and the Apple TV says it is performing normally. In the settings, whenever I attempt to connect to a wireless network, I am now only offered "Other..." as a choice. Proceeding to the next screen, I enter the name of the network closest to the Apple TV -- an Airport Extreme set up for 5 GHz that this Apple TV connected with daily up until 2 days ago. The Airport base station is perfoming normally, as my MacBook Pro can see it and establish a network connection without any difficulty. The issue is limited to the Apple TV. I did a Factory Restore, and now when I go to Wireless Network > "Other..." > Enter the name of the wireless network" the resuit is always the same, and error message stating: "There was a problem connecting to the network. Check your settings and try again. (-4)".
This message comes up almost immediately, without requesting a WiFi password -- suggesting to me that this Apple TV has lost the ability to connect to ANY wireless network due to a hardware failure.
Q: Has anyone else in the Support Community had a similar experience with their 1st Gen Apple TV, and if so, did you find a solution to it?
Note: When I first noticed the connction to this Apple TV had gone stale (greyed out in the iTunes Airplay Speakers list), and prior to doing the Factory Restore, I could play back iTunes content stored on the hard drive, but could not connect to the local wireless networks. I noticed that the Apple TV was running very hot -- it has alwasy run pretty hot to the touch.
If this Apple TV has died, I will get a 3rd Gen Apple TV, but wiill then have to work through the HDMI to Composite video + Audio issues, as this Apple TV is connected to our older (non-HDMI) TV.

Follow-up: Able to connect with ethernet cable, downloaded software updates, connected to iTunes, and synchec content.
Next, disconnected the ethernet cable. ATV1 froze and was restarted using the Menu + ( - ) combo on the remote. Re-ran diagnostics yeilds: Apple TV is working fine.
Restarted, then went to configure the Wirelss settings. Apple TV once again does not show either of the two wireless networks. Selecting "Other..." and entering the SSID yields the same immediate response:
"There was a problem connecting to the network. Check your settings and try again. (-4)"
No change on the wireless front :-( Bummer.
Looks like an ethernet connection is the only option left to continue using this Apple TV 1st Gen.
Thanks for your help. -- Paul

Canon MX340 wireless printer no longer connecting over wireless and coming up with "a communications error has occured"

I have a Canon MX340 wireless printer and have only recently started having trouble printing over the wireless connection. No settings have changed on my MacBook Pro, the printer, the router or the wifi connection and it is strange how it has just stopped working. I have tried things like restarting the laptop and removing the printer from the laptop and re-adding it. It sometimes seems to work for maybe one print but then it goes back to saying "a communications error has occured", when I try to print again.
Any help would be great. Thanks

I had the same MX340 problem. My printer was working fine over WiFi connection to my Airport Extreme for years and then suddenly, about a month ago, it stopped printing after the first print job. I can print once and then I have to power-cycle the printer to get it to print another time and then I have to repeat the power-cycle.
The printer seems to be "forgotten" by the network or lose its connection after the first print job.
On my MacBookPro 10.6.8 I get the error code 300...yadayadayad... On my iMac 10.5.8 it just says :communications error".
HERE IS THE FIX - I got it off this link - http://www.techsurvivors.net/forums/index.php?showtopic=24681
You have to connect to the MX340 using the printer cable that came with the printer (or any USB printer cable) and set up a hardwired USB printer queue. Then print a couple of print jobs - I use TextEdit and type in "1234". Then try the same thing but select your WiFi print queue - I just type another line on the same sheet of paper with TextEdit.
The WiFi connection should work again. I did this a few more times and then disconnected the USB cable and now it continues to work without the USB print queue being used. I can also print to the WiFi queue with my iMac.
If you still have problems I suggest you set up the printer again on the WiFi router using the "print cable connection" method. Here's a link to a webpage someone kindly provided instructions for the process:
http://machinesaredigging.com/2011/04/08/how-to-install-the-printer-canon-mx340- wi-fi-without-the-cd-on-mac/
Good luck!

My printer no longer connects to wireless router... says it is off-line but the wireless light is on

HP Photosmart C309a

If you reset all settings, that should "forget the network" for you. But when you say that you already tried resetting the settings, were you able to reset them? In other words, were all of the settings reset when you tried it?

Two Issues: Cannot connect to wireless networks; Cannot load certain sites

Hey everybody,
I have a MacBook Pro 15".
In just the past week, I've stumbled upon two sudden problems with my network/internet connectivity.
First, I can no longer connect to wireless networks, be it an infrastructure point or computer-to-computer ad-hoc networks. I'm not really sure why. I installed the latest AirPort Update (4.2.3, according to System Profiler). I also recently installed both iStumbler and KisMac v.21. When I started having issues, I thought that maybe one of these two programs might be the culprit, so I uninstalled both of them but I still have the same problem.
Second, I've had issues with not being able to connect to certain websites. I use both Safari and BonEcho as my browsers. The specific sites seem random:
www.weffriddles.com
www.macrumors.com
images.google.com
sports.yahoo.com
finance.yahoo.com
to list a few.
If you need any diagnostic information, please let me know.
Thanks in advance for any advice/help you can provide!
Tommy H.
MacBook Pro Mac OS X (10.4.9) browsers: Safari, BonEcho/ Airport Driver Version: 4.2.3

If you are trying to connect to a third-party router using WPA or WEP, there is a good chance that your Airport card was broken by Apple's 2007-02 Airport Update. There is no fix, and for many of us, our Macbooks and Macbook Pros are useless for wireless connections until Apple fixes the issue. At this point, Apple seems to be denying that there even is an issue, so we may all be in for a long wait indeed.
See this thread if you have some time:
http://discussions.apple.com/thread.jspa?threadID=883021&tstart=0

#2 WVC210 no longer connects to wireless, otherwise OK

Similar Messages

Maybe you are looking for