26 Error during syntax check of IDoc (outbound)

Hi Experts
I am using TPSDLS - Idoc(outbound).
When we view in WE02 : for few of the deliveries it is working fine , but for some it is giving the following error
26     Error during syntax check of IDoc (outbound)
Please any one help me out for the same
Thanks & Regards
Shaveta

Please check the segments for the idocs in error status in WE02. The segments in the idoc should be in the same sequence as defined while creating idoc in WE30.
For eg. taking the case of invoic02 idoc.
Segment E1EDP01 cannot come prior to segment E1EDK01.
As in WE30 it is defined to come after E1EDK01\
Please reward the points if this information is useful.

Similar Messages

  • Error 26: Error during syntax check of IDoc (outbound)

    Hi all,
       I am getting error when we try to generate IDoc in Outbound process (to send data from SAP to external Interface).
      Error no is 26. And I have checked the status records, it shows the below error message. "EDI: Syntax error in IDoc (too many repetitions of a group). According to the syntax description of the basic type SHPMNT05 (customer enhancement ZSHPMNT05), the segment group E1EDL37 can be repeated a maximum of 0000000260 times. However, this segment group occurs more frequently in the IDoc. Please check the IDoc or the syntax description of the basic type SHPMNT05 (customer enhancement ZSHPMNT05).
      Can any one tell me is there any limitation for data records for segment E1EDL37?
      Kindly suggest me what is the problem & what needs to be done to fix this.
    Thanks in advance.
    Regards
    Mohammad.

    Hi Guys,
    This is a problem which occurs throughout lots of SAP systems. This occurs due to someone changing the IDOCSYN table without making the neccessary changes to the EDISYN table.
    For more information on this you can check out the note - 370021. Also if you run the following program in your system and make the changes to your IDOC segment, this error will go away.
    (Please note that this program is provided by SAP and I just made a small adjustment by adding the COMMIT WORK AND WAIT statement) .
    Hope this helps.
    REPORT ze1edp19.
    TABLES: idocsyn, edisyn, cimsyn.
    DATA: old_idocsyn TYPE idocsyn,
          lt_idocsyn  TYPE STANDARD TABLE OF idocsyn,
          ls_idocsyn  TYPE idocsyn,
          old_edisyn  TYPE edisyn,
          lt_edisyn   TYPE STANDARD TABLE OF edisyn,
          ls_edisyn   TYPE edisyn.
    PARAMETER idoc_typ TYPE idocsyn-idoctyp DEFAULT 'ORDERS05'.
    PARAMETER idoc_seg TYPE idocsyn-segtyp  DEFAULT 'E1EDP19'.
    PARAMETER occmax   TYPE idocsyn-occmax  DEFAULT '99'.
    PARAMETER upd_flag AS   CHECKBOX        DEFAULT space.
    START-OF-SELECTION.
    table IDOCSYN
      SELECT * FROM idocsyn
             INTO TABLE lt_idocsyn
             WHERE idoctyp = idoc_typ.
      READ TABLE lt_idocsyn INTO ls_idocsyn
                            WITH KEY idoctyp = idoc_typ
                                     segtyp  = idoc_seg.
      IF sy-subrc = 0.
        MOVE ls_idocsyn TO old_idocsyn.
        ls_idocsyn-occmax = occmax.
        IF upd_flag EQ 'X'.
          UPDATE idocsyn FROM ls_idocsyn.
         COMMIT WORK AND WAIT.
          WRITE: 'Table IDOCSYN updated',
                 /,'         Idoctype:      ',idoc_typ,
                 /'         segment number: ',ls_idocsyn-nr.
          WRITE: /,'OCCMAX changed from',old_idocsyn-occmax,
                 ' to ',ls_idocsyn-occmax.
        ELSE.
          WRITE: 'No UPDATE done in table IDOCSYN',
                 /,'         Idoctype:      ',idoc_typ,
                 /'         segment number: ',ls_idocsyn-nr.
          WRITE: /,'OCCMAX changed from',old_idocsyn-occmax,
                 ' to ',ls_idocsyn-occmax.
        ENDIF.
      ELSE.
        WRITE: 'no such record in table IDOCSYN'.
      ENDIF.
      ULINE.
    table EDISYN
      SELECT * FROM edisyn
             INTO TABLE lt_edisyn
             WHERE idoctyp = idoc_typ AND
                   cimtyp  = space.
      READ TABLE lt_edisyn INTO ls_edisyn
                           WITH KEY idoctyp = idoc_typ
                                    cimtyp  = space
                                    segtyp  = idoc_seg.
      IF sy-subrc = 0.
        MOVE ls_edisyn TO old_edisyn.
        ls_edisyn-occmax = occmax.
        IF upd_flag EQ 'X'.
          UPDATE edisyn FROM ls_edisyn.
          WRITE: 'Table EDISYN updated',
                 /,'         Idoctype:      ',idoc_typ,
                 /'         segment number: ', ls_edisyn-posno.
          WRITE: /,'OCCMAX changed from',old_edisyn-occmax,
                 ' to ',ls_edisyn-occmax.
        ELSE.
          WRITE: 'No UPDATE done in table EDISYN',
                 /,'         Idoctype:      ',idoc_typ,
                 /'         segment number: ',ls_idocsyn-nr.
          WRITE: /,'OCCMAX changed from',old_idocsyn-occmax,
                 ' to ',ls_idocsyn-occmax.
        ENDIF.
      ELSE.
        WRITE: 'no such record in table EDISYN'.
      ENDIF.

  • Error during syntax check of IDoc (outbound)

    Hello,
    I did an insert into idoc_data of segment E1TXTH8 (level 3 - as child of E1EDL20) and E1TXTP8 (level 4 as child of E1TXTH8).
    inside user-exit ZXTRKU02.
    But idoc is created with error 26 (and hierarchy is not respected! (WE05)).
    Am I using the right user-exit or i miss something in the sequence while insert??
    Error:
    EDI: Syntax error in IDoc (segment cannot be identified)
    Message no. E0078
    Diagnosis
    The segment E1TXTH8 does not occur at the current level of the basic type DELVRY03 (extension ).
    This error can have several reasons:
    The segment E1TXTH8 is assigned to a group whose header segment does not occur.
    The segment E1TXTH8 does not exist in the syntax description of the basic type DELVRY03 (extension ).
    The sequence of segments in the group in which the segment appears is incorrect.
    Previous errors ('mandatory' segment or group missing) may be due to this error.
    Procedure
    Please check the IDoc or the syntax description of the basic type DELVRY03 (extension ).
    Thank you in advance for your help.
    Edited by: Fakher Baklouti on Apr 9, 2010 7:12 PM

    Hello Faker,
    It depends on the previous available segment.
    Here is the procedure,
    1. Get all the segments from the database table IDOCSYN where basic type is DELVRY03
    2. Sort them by Sequential number in DESCENDING
    3. Get the Index (say GV_INDEX) of the segment in IDOCSYN which you want to insert or edit
    4. LOOP internal table of IDOCSYN from index GV_INDEX and check for the availability of the segment of IDOCSYN in idoc data
    5. If it is success, break the loop and now you got the previous available segment
    6. Now just insert your segment in the idoc table just after it.

  • Idoc error during syntax check - error26

    hi everyone
    I need help understanding where this idoc error is generating and what is it about. I went through the steps many times but it's still the same.

    hi
    where is the section which populates the segments? Could you ask for the info you need I am happy to take screen shots because till now from all suggestions so far I'm not able to solve this.
    Here is the idoc program for this:
    *& Report  ZIDOCPG
    REPORT  ZIDOCPG.
    PARAMETERS PLIFNR TYPE LIFNR.
    PARAMETERS PNAME1 TYPE NAME1_GP.
    PARAMETERS PORT01 TYPE ORT01_GP.
    DATA VSEG LIKE Z1TRANS.
    DATA VEDP13 LIKE EDP13.
    DATA: BEGIN OF FEDIDC OCCURS 0.
        INCLUDE STRUCTURE EDIDC.
    DATA: END OF FEDIDC."MASTER IDOC
    DATA: BEGIN OF TEDIDC OCCURS 0.
        INCLUDE STRUCTURE EDIDC.
    DATA: END OF TEDIDC."COMM IDOC
    DATA: BEGIN OF TEDIDD OCCURS 0.
      INCLUDE STRUCTURE EDIDD.
    DATA: END OF TEDIDD.
    SELECT SINGLE * FROM EDP13 INTO VEDP13 WHERE MESTYP = 'ZTMSG'   AND
      IDOCTYP = 'ZTRANS'.
    VSEG-LIFNR = PLIFNR.
    VSEG-NAME1 = PNAME1.
    VSEG-ORT01 = PORT01.
    TEDIDD-SEGNAM = VSEG.
    TEDIDD-SDATA = VSEG.
    APPEND TEDIDD.
    *TO GEN IDOC CONTROL RECORD.
    FEDIDC-MESTYP = 'ZTMSG'.
    FEDIDC-DOCTYP = 'ZTRANS'.
    FEDIDC-RCVPOR = VEDP13-RCVPOR.
    FEDIDC-RCVPRN = VEDP13-RCVPRN.
    FEDIDC-RCVPRT = VEDP13-RCVPRT.
    APPEND FEDIDC.
    CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
      EXPORTING
        MASTER_IDOC_CONTROL                  = FEDIDC
      TABLES
        COMMUNICATION_IDOC_CONTROL           = TEDIDC
        MASTER_IDOC_DATA                     = TEDIDD.
    COMMIT WORK.

  • Idoc outbound errors05(error during translation) 07(error during syntax ch)

    hi,
            i found all idocs in the system fails with status 07(error during syntax check)
    idoc got different stats:
      flow of status:01
                          30
                          03
                          18
                          24
                          05 (error during translation)
                          07 (error during syntax check)
                        what could be the problem ?

    Hi,
    This could be the format which you are sending not matching with other system.
    For example, if your are sending the Idocs to EDI, system, the mapping should be correct with the idoc which you have are sending. If haven't changed any posting program logic or idoc segments, then check with other system who is supposed to transmit the idocs.
    Regards,
    Ashok

  • No syntax error on syntax check, but syntax error on activation

    Hi all,
    I have a confusing problem.
    I want to default some values on item level of purchase order (ME21N). I added a module call in flow logic of screen 1313 of program SAPLMEGUI. The module itself I added to include LMEVIEWSF01. Here I default some fields of structure MEPO1313. This structure is defined in TOP-include using TABLES.
    Before modification I debugged the transaction and found out, that structure MEPO1313 is accessible during PBO. Changes in debugger are shown as expected on screen.
    Now, syntax check on LMEVIEWSF01 and even on SAPLMEGUI returns no error. But on activation I get syntax error saying MEPO1313 is not know ??
    So, structure MEPO1313 is accessible in debugger, no syntax error on syntax-check, but syntax error on activation ?
    What is going on ??
    Elko

    go to SE80 and Check syantax at package level.
    you might  be checking syantax for other include and problem si somw ehere else, justa  thought.

  • Error in Syntax check in code

    Hi,
    We are developing a report, where we have written the following piece of code:
    LOOP AT lt_kondd2.
          DO.
           If lv_first = "X".                                            "1
              READ TABLE lt_kotd2 WITH KEY knumh = lt_kondd2-knumh.
           Else.                                                         "1
              READ TABLE lt_kotd2 WITH KEY knumh = lv_smatn.
           Endif.      
          Some Statements.
         Enddo.
        Some statements
    Endloop.
    During syntax check the above code is giving the following error:
    Field "READ" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement.
    Please help point out what could be wrong.
    Thanks,
    Peter

    >
    Peter Grosvenor wrote:
    >       
    If lv_first = "X".                                            "1
    You are using double quotes (") rather than single quotes (').
    Next time, do more desk checking before posting here.
    Rob

  • Can not Update icloud for win7 Sheep error during transformation. check that the indicated transmitter propagating path is valid. tryet in appel updater and tryet downloading from apple but the same

    Can not Update icloud for win7 Gets
    Sheep error during transformation. check that the indicated transmitter propagating path is valid.
    tryet in appel updater and tryet downloading from apple but the same

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • Adhoc Query : Error during selection; check the selection conditions

    Hi
    We have a report set-up and which we want to run using our adhoc query report tcode S_PH0_48000513
    The report, has a few different selection criteria in it to look at all action IT screen data in the system for ee's in specific personnel areas. There is also a criteria to allow us to paste in specific employee numbers we are interested in. The issue I am facing is that over about 3000 ids, the system automatically returns me a message when I click on the Output button to run the report which states:
    Error during selection; check the selection conditions
    Message no. PAIS206
    I am not sure why this is happening. The selection criteria are fine and the other day I ran the report and I experienced no issues. The report ran successfully. Now though, if I try and paste in all the ids I am interested in (about 8000) I get this message straightaway.
    Can anything be done to overcome this issue?
    Any advice would be much appreciated.
    Nicola

    Hi
    The message in full is:
    Error during selection; check the selection conditions
    Message no. PAIS206
    Diagnosis
    A runtime error occurred during dynamic selection.
    System response
    The runtime error will be caught; no short dump will be created. This error should not occur as a rule. However, very large select statements may trigger the runtime error SAPSQL_STMNT_TOO_LARGE or DBIF_RSQL_INVALID_RSQL. There is no way to prevent this happening. In this case, the error can only be caught.
    Procedure
    Check the selection conditions to see whether the error was caused because the option "Import from text file" included too many objects in the "Multiple selection" dialog. If this is so, you must limit the number of individual values.

  • Tp error during EHPI checks NTCHK phase

    Hi,
    We are running the EHPI and recieve the following error during the Checks phase:
    Severe error(s) occured in phase PREP_GENCHECKS/NTACT_CHK!
    Last error code set: Process 'tp' exited with 12, see '/uexports/DV1/EHPI/abap/log/TP.ECO' for details
    Error during "tp ntaction"-call - check TP.ECO
    TP.ECO=
    SAPehpi> Starting subprocess 16165 at 20101007100438
    ENV: DIR_LIBRARY=/uexports/DV1/EHPI/abap/exenew
    ENV: JAVA_HOME=/opt/java1.4
    ENV: LD_LIBRARY_PATH=/uexports/DV1/EHPI/abap/exenew:/uexports/DV1/EHPI/jvm/jre/lib/ia64/server:/uexports/DV1/EHPI/jvm/jre/
    lib/ia64:/uexports/DV1/EHPI/jvm/jre/../lib/ia64
    ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
    ENV: ORACLE_BASE=/oracle
    ENV: ORACLE_HOME=/oracle/DV1/102_64
    ENV: ORACLE_SID=DV1
    ENV: PATH=/uexports/DV1/EHPI/abap/exenew:/opt/java1.4/bin:/oracle/DV1/102_64/bin:.:/home/dv1adm:/usr/sap/DV1/SYS/exe/run:/
    usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/hparray/bin:/opt/nettladm/bin:/opt/fcms/bin:/
    usr/contrib/kwdb/bin:/usr/bin/X11:/opt/graphics/common/bin:/opt/upgrade/bin:/opt/ipf/bin:/opt/resmon/bin:/opt/perf/bin:/op
    t/wbem/bin:/opt/wbem/sbin:/opt/prm/bin:/opt/sec_mgmt/bastille/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/gnome/bin:/opt/ignite/
    bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/hpsmh/bin:/opt/wlm/bin:/opt/hpnpl//bin:/usr/contrib/bin/X11:/opt/sfm/bin:/opt/
    mozilla:/opt/perl_32/bin:/opt/perl_64/bin:/opt/swa/bin:/oa/cdirect/ndm/bin:.
    ENV: SAPSYSTEMNAME=DV1
    ENV: auth_shadow_upgrade=0
    ENV: dbms_type=ORA
    ENV: dbs_ora_schema=SAPR3
    ENV: dbs_ora_tnsname=DV1
    EXECUTING /uexports/DV1/EHPI/abap/exenew/tp (/uexports/DV1/EHPI/abap/exenew/tp) ntaction ntop=chkant DV1 pf=/uexports/DV1/
    EHPI/abap/bin/DEFAULT.TPP srctt=DDNTT srctf=DDNTF dsttt=DDNTT dsttf=DDNTF intdel=YES -Dntact_timecmp=no protyear=40
    initial value of NLS_LANG: 'AMERICAN_AMERICA.UTF8'
    This is /uexports/DV1/EHPI/abap/exenew/tp version 372.04.88 (release 701, unicode enabled)
    Warning: Parameter INTERRUPT is no longer used.
    Warning: unknown parameter MAX_SEMAPHORE_WAIT in parameter file (line 8).
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Warning: Parameter INTERRUPT is no longer used.
    Warning: unknown parameter MAX_SEMAPHORE_WAIT in parameter file (line 8).
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Warning: Parameter DBCONFPATH is no longer used.
    tp finished with return code: 12
    meaning:
      A tool used by tp aborted
    Process with ID 16165 terminated with status 12
    NTCHK.LOG=
    1 ETQ201 Entering upgrade-phase "NTACT_CHK" ("20101007100438")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPR3
    4 ETQ399   auth_shadow_upgrade=0
    4 ETQ399 Set environment for standard connect:
    4 ETQ399 ENV: dbs_ora_schema=SAPR3
    4 ETQ399 ENV: auth_shadow_upgrade=0
    4 ETQ399 Set RFC variables for standard connect:
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Set tool parameters for standard connect:
    4 ETQ399   default TPPARAM: DEFAULT.TPP
    1 ETQ200 Executing actual phase 'PREP_GENCHECKS/NTACT_CHK'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'CHKANT'
    2 ETQ399 Arg[1] = 'DDNTT'
    2 ETQ399 Arg[2] = 'DDNTF'
    2 ETQ399 Arg[3] = 'DDNTT'
    2 ETQ399 Arg[4] = 'DDNTF'
    2 ETQ399 Arg[5] = ''
    2 ETQ399 Arg[6] = 'NOBUFRESET'
    2 ETQ399 Arg[7] = ''
    2 ETQ399 Arg[8] = ''
    2 ETQ399 Arg[9] = ''
    2 ETQ399 Arg[10] = 'NTCHK.ELG'
    4 ETQ380 computing toolpath for request "TP_NTACTION_SHD"
    4 ETQ381 request "TP_NTACTION_SHD" means "tp ntact for shadow tables"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_SHDNEW"
    4 ETQ383 translates to path "exenew"
    4 ETQ383 translates to path "exe"
    2 ETQ399 Checking of nametabs ...
    4 ETQ399 2010/10/07 10:04:38: put_execute: (tp) forkpid:16165
    It doesn't even get to the point of creating NTCHK.ELG
    -rw-rr   1 dv1adm     sapsys      287923 Oct  7 10:19 SAPehpichk.log
    -rw-rr   1 dv1adm     sapsys       13144 Oct  7 10:19 TROUBLE_SAVELOGS.LOG
    -rw-rr   1 dv1adm     sapsys      151957 Oct  7 10:19 SAPehpi_troubleticket_logs.sar
    -rw-rw-r--   1 dv1adm     sapsys       10039 Oct  7 10:19 SLOG700
    -rw-rw-r--   1 dv1adm     sapsys       80609 Oct  7 10:19 ALOG700
    -rw-rr   1 dv1adm     sapsys        9238 Oct  7 10:19 TP.ECO
    -rw-rr   1 dv1adm     sapsys        1729 Oct  7 10:19 SAPehpi_troubleticket.log
    -rw-rw-r--   1 dv1adm     sapsys     112988412 Oct  7 10:19 PN401007.DV1
    -rw-rr   1 dv1adm     sapsys        1292 Oct  7 10:05 NTCHK.LOG
    -rw-rr   1 dv1adm     sapsys       57379 Oct  7 10:05 SAPehpiConsole.log
    -rw-rw-r--   1 dv1adm     sapsys      148736 Oct  7 10:04 ULOG10_4
    -rw-rr   1 dv1adm     sapsys       10692 Oct  7 10:04 SAPehpi.ECO
    -rw-rr   1 dv1adm     sapsys       10581 Oct  7 10:04 NTCHK.SAV
    takderp1:dv1adm 530> ll NT*
    -rw-rr   1 dv1adm     sapsys        1292 Oct  7 10:05 NTCHK.LOG
    -rw-rr   1 dv1adm     sapsys       10581 Oct  7 10:04 NTCHK.SAV
    SAPehpi_troubleticket.log=
    This trouble ticket was created by SAPehpi on 20101007101947
    SAPehpi broke during phase NTACT_CHK in module PREP_GENCHECKS / General checks
    Error Message: Process 'tp' exited with 12, see '/uexports/DV1/EHPI/abap/log/TP.ECO' for details
    Error during "tp ntaction"-call - check TP.ECO
    Summary of SAPehpi:
    SAPehpi Release:        7.10/1
    SAPehpi Version:        SAPehpi version 7.10/1
    Start Release:          700
    Target Release:         701
    Summary of host system details:
    SID:                    DV1
    Host:                   takderp1
    MS Host:                takderp1
    GW Host:                takderp1
    Start Path:             /usr/sap/DV1/SYS/exe/run
    Kernel Path:            /usr/sap/DV1/SYS/exe/run
    Summary of operating system details:
    OS Type:                HP-UX IA64
    OS Version:             11.23
    Summary of database details:
    Database Type:          ora
    Database Version:       10.2.0.2.0
    Summary of RFC details:
    Host:                   takderp1
    GW Host:                takderp1
    Client:                 000
    Destination:            DV1
    Language:
    System No.:             00
    Any help would be appreciated.
    Thanks,
    Jim

    Hi Eric,
    I have the log posted above but here is an excert from the TP.ECO log.
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Warning: Parameter DBCONFPATH is no longer used.
    tp finished with return code: 12
    meaning:
      A tool used by tp aborted
    Process with ID 22858 terminated with status 12
    Regards,
    JIm

  • Error during availability check for order

    Hi PM experts,
    How can I make below warning message (W) to an error message (E)?
    Message no: CO820 (Error during availability check for order)
    Regards,
    Nizam
    PM Consultant

    Hi,
    you can cantrol not to release maint orders in case if parts are missing by OIOI transaction, here under Material Availability  against Release material you maintain option 3 No release if parts are missing. This way you can achieve this. If there are other components which has stock on Maint order then delete the un-available material from maint order then it will allow you to release the order.
    Hope availability check rule is maintained on material master.
    Hope it helps.
    Regards,
    N.Nagaraju

  • ERRORS during NAMETAB CHECK in checks phase of EHP Inst.

    Hi SDNers,
    I'm implementing SAP Enhancement Package 4  for ECC6 system (ABAP).I started the application and it gets through the checks phase ok, except errors  during the GENCHECKS/NTACT_CHK TEXT .
    I logged on se11 but I could not able to see Runtime Object .
    See below error message:
    %BEGIN PREP_GENCHECKS/NTACT_CHK TEXT
    ERROR> *** ERRORS during NAMETAB CHECK found ***
            Analyze the logfile NTCHK.ELG to determine
            the nametab, that caused the error.
            Call transaction se11 for the corresponding
            DDIC object. Choose menu Utilities -> Runtime Object -> Check
            If you repeat the phase and there is still an error,
            see also note Nr. 179334 for additional information
    +++++++++++++ Content of NTCHK.ELG +++++++
    1 ETQ201 Entering upgrade-phase "NTACT_CHK" ("20100309081807")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPR3
    4 ETQ399   auth_shadow_upgrade=<null>
    4 ETQ399 Set environment for standard connect:
    4 ETQ399 ENV: dbs_ora_schema=SAPR3
    4 ETQ399 ENV: auth_shadow_upgrade=0
    4 ETQ399 Set RFC variables for standard connect:
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Set tool parameters for standard connect:
    4 ETQ399   default TPPARAM: DEFAULT.TPP
    1 ETQ200 Executing actual phase 'PREP_GENCHECKS/NTACT_CHK'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'CHKANT'
    2 ETQ399 Arg[1] = 'DDNTT'
    2 ETQ399 Arg[2] = 'DDNTF'
    2 ETQ399 Arg[3] = 'DDNTT'
    2 ETQ399 Arg[4] = 'DDNTF'
    2 ETQ399 Arg[5] = ''
    2 ETQ399 Arg[6] = 'NOBUFRESET'
    2 ETQ399 Arg[7] = ''
    2 ETQ399 Arg[8] = ''
    2 ETQ399 Arg[9] = ''
    2 ETQ399 Arg[10] = 'NTCHK.ELG'
    4 ETQ380 computing toolpath for request "TP_NTACTION_SHD"
    4 ETQ381 request "TP_NTACTION_SHD" means "tp ntact for shadow tables"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_SHDNEW"
    4 ETQ383 translates to path "exenew"
    4 ETQ383 translates to path "exe"
    2 ETQ399 Checking of nametabs ...
    4 ETQ399 2010/03/09 08:18:07: put_execute: (tp) forkpid:1175614
    4 ETQ010 Date & Time: 20100309090358 
    Has anyone encountered anything similar? Any ideas?
    Thanks in advance,
    Faris AL-Saweed

    hi Niraij,
    below more details of SAPehpi_troubleticket.log
    This trouble ticket was created by SAPehpi on 20100310093046
    SAPehpi broke during phase NTACT_CHK in module PREP_GENCHECKS / General checks
    Error Message: No lines found in logfile matching 'PN......\.EQA'
    Summary of SAPehpi:
    SAPehpi Release:     7.10/1
    SAPehpi Version:     SAPehpi version 7.10/1
    Start Release:          700
    Target Release:          701
    Summary of host system details:
    SID:               EQA
    Host:               wmdsapeqa
    MS Host:          wmdsapeqa
    GW Host:          wmdsapeqa
    Start Path:          /usr/sap/EQA/DVEBMGS00/exe     
    Kernel Path:          /usr/sap/EQA/DVEBMGS00/exe
    Summary of operating system details:
    OS Type:          AIX
    OS Version:          5.2.0
    Summary of database details:
    Database Type:          ora
    Database Version:     10.2.0.4.0
    Summary of RFC details:
    Host:               wmdsapeqa
    GW Host:          wmdsapeqa
    Client:               000
    Destination:          EQA
    Language:          
    System No.:          00
    regards,
    Faris
    Edited by: Faris Solaiman Saweed on Mar 10, 2010 8:07 AM

  • Error in syntax .check manual

    Hi
    I am getting on value of variable(sj) from database and storing in list and using that value to get ID from same table.
    Now problem ---- if value of variable (psj = yyuyu "ghgh jkjkj" ghghg ) OR (psj=hjhjhj 'hjhjh jkjkj' hhjhjh).It gives error "you have error in syntax......." .(because of presence of sigle or double quote.how to correct this .I am newbie
    i tried both but same result
    a)String psj=(String)kjk.get(y);
    resultsetnt=statement.executeQuery("select ID from tbl where Text='"+psj+"'");
    b)String psj=(String)kjk.get(y);
    resultsetnt=statement.executeQuery("select ID from tbl where Text=\""+psj+"\""); where id continas integer

    a)
    <%for(int p=0;p<o.size();p++){
    String psj=(String)kjk.get(y);
    resultsetnt=statement.executeQuery("select ID from tbl where Text='"psj"'"); }}
    As you can see that above is java code.how to reform the query using your solution? one thing to be noted is psj is variable which hold the value not the string itself
    vNewVal := replace(string,'"',null);
    Edited by: user515494 on Sep 10, 2008 9:04 AM
    Edited by: user515494 on Sep 10, 2008 9:06 AM

  • Urgent: Error during Import Metadata for IDoc

    Hi
      We successfully imported the metadata for IDoc from R/3 in Development and Test box and everything worked fine.
    Now, when we try to import the metadata for IDoc in Production box it gives me an error" Basic type 'IDoc name' does not exist". I went back to the development box and I try to import some other Idoc metadata and it gives me the above error message.
      I checked RFC destination, IDX1 and everything seems to works fine. Any suggestions will be helpful.
    Thanks
    Mohan

    Hi Mohan,
    Did you execute IDX2? And if so, please delete existing meta data for port and reimport, if you still receive an error check your R/3 connections (SM59) and port definitions in the receiver IDOC channel (directory)!
    Cheers,
    Paul

  • Error during Document Check IN and Conversion to PDF from IBR

    Hi All
    I am getting the following error when i trying to check in a document of 21 Mb
    Refinery Logs :
    The post converted queue for agent 'idc' states that Content ID 'SPECAPI5' converted but the converted primary webviewable file was not found. Exception type is 'java.lang.Throwable'. [ Details ]
    Details :
    An error has occurred. The stack trace below shows more information.
    !csJobCannotBeReturnedConvertedFileMissingDetails,idc,SPECAPI5!syExceptionType,java.lang.Throwable
    java.lang.Throwable
         at intradoc.common.IdcLogWriter.doMessageAppend(Unknown Source)
         at intradoc.common.Log.addMessage(Unknown Source)
         at intradoc.common.Log.errorEx2(Unknown Source)
         at intradoc.common.Log.errorEx(Unknown Source)
         at intradoc.common.Log.error(Unknown Source)
         at docrefinery.server.RefineryService.pullConvertedWork(RefineryService.java:546)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at intradoc.common.IdcMethodHolder.invokeMethod(Unknown Source)
         at intradoc.common.ClassHelperUtils.executeMethodEx(Unknown Source)
         at intradoc.common.ClassHelperUtils.executeMethod(Unknown Source)
         at intradoc.server.Service.doCodeEx(Unknown Source)
         at intradoc.server.Service.doCode(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doAction(Unknown Source)
         at intradoc.server.Service.doAction(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doActions(Unknown Source)
         at intradoc.server.Service.doActions(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.executeActions(Unknown Source)
         at intradoc.server.Service.executeActions(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doRequest(Unknown Source)
         at intradoc.server.Service.doRequest(Unknown Source)
         at intradoc.server.ServiceManager.processCommand(Unknown Source)
         at intradoc.server.IdcServerThread.run(Unknown Source)
    Status : GENWWW

    This is the Error that i get when i click on "Get Conversion (HTML)" Link of the Document
    Content Server Request Failed
    Unable to get dynamic conversion. The file is too large to convert.
    [ Details ]
    intradoc.common.ServiceException: !csDynConvFileTooLarge at dynamicconverter.DynConverterHandler.setInputConversionInfo(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461) at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142) at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75) at intradoc.server.Service.doCodeEx(Service.java:488) at intradoc.server.Service.doCode(Service.java:470) at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350) at intradoc.server.Service.doAction(Service.java:450) at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191) at intradoc.server.Service.doActions(Service.java:445) at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1061) at intradoc.server.Service.executeSubServiceCode(Service.java:3453) at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:939) at intradoc.server.Service.executeServiceEx(Service.java:3448) at intradoc.server.Service.executeService(Service.java:3432) at intradoc.server.Service.doSubService(Service.java:3421) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461) at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:128) at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:113) at intradoc.server.Service.doCodeEx(Service.java:505) at intradoc.server.Service.doCode(Service.java:470) at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350) at intradoc.server.Service.doAction(Service.java:450) at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191) at intradoc.server.Service.doActions(Service.java:445) at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111) at intradoc.server.Service.executeActions(Service.java:431) at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632) at intradoc.server.Service.doRequest(Service.java:1709) at intradoc.server.ServiceManager.processCommand(ServiceManager.java:357) at intradoc.server.IdcServerThread.run(IdcServerThread.java:195)

Maybe you are looking for