300 pixels vs 72 pixels

We built a home page in Photoshop at 300 pixels per inch. Now
we are ready to load into Dreamweaver and it seems as though many
pages are built at 72-80 PPI. Do we have to start over? Does it
matter? Please tell me I dont have to start all over again? This
has taken me hours to get to this point...
THanks
VED

>>we are ready to load into Dreamweaver
Ignoring the resolution (non)issue, when you say "load into
Dreamweaver" do
you mean just the images from PS or did you generate HTML in
PS also?
Because if you are planning to use PS generated HTML you are
in for a big
disappointment and endless frustration. Never use HTML from
an image app, it
is convoluted and will create a rigid but fragile structure
that will break
easily and often. Create your HTML only in DW, you'll be glad
you did.
Walt
"vederenzo" <[email protected]> wrote in
message
news:g9t4kj$4d9$[email protected]..
> We built a home page in Photoshop at 300 pixels per
inch. Now we are
> ready to
> load into Dreamweaver and it seems as though many pages
are built at 72-80
> pixels. Do we have to start over? Does it matter? Please
tell me I dont
> have
> to start all over again? This has taken me hours to get
to this point...
>
> THanks
> VED
>

Similar Messages

  • Can image for blue pixels and report pixel x,y coordinates

    Hi
    I am not sure if I am posting in the right forum so please excuse me.
    I have a number of images (100 +) which are 400 pixels by 400 pixels each. On these images I have a number of blue dots which are probababally 2 by 2 pixels each. I want to write a program that will scan an image for me and report the exact point of a blue dot back to me i.e. I want in pixels the x and y coordinates of the blue dots.
    Notes
    An image can contain zero or more blue dots.
    Some blue dots may cross other blue dots (very rarely)
    Urgent help needed please!!!
    Antek

    Crossposted: http://forum.java.sun.com/thread.jsp?forum=31&thread=499594&tstart=0&trange=15

  • Pixels/cm vs Pixels/inch

    Hi,
    Is there a setting in the Photoshop scripting that determines whether images export in pixels/cm or pixels/inch? The software program that we have written will ask the user for a preferred print resolution (always using pixels/inch), and will then output the images to Photoshop at that preferred resolution. However, for some reason, on some computers it saves the images using pixels/cm. For example, in our software the user may choose to export at 250 pixels/inch, but when they subsequently open the exported image in Photoshop, the image size shows the size as 98 pixels/cm. Changing the Photoshop preferences doesn't seem to affect this in any way.
    Cheers,
    Ian

    Hi Ramon,
    Thanks for your suggestion, however the Preferences> Units and Rulers setting does not have anything to do with the Contact Sheet function. The Contact Sheet function itself asks for the Units (which I set to 'cm' as I want to specify the contact sheet dimensions in cm's). The 'Resolution' is a separate setting that I set to 'Pixels/Inch'. I have a friend who is doing exactly the same thing as me and the Resolution gets set correctly as 'per/inch' in the final contact sheet. Their Unit/Rulers preference setting is CM so this proves that it is not related to the contact sheet function.
    The reason I don't think that the preferences is the issue is because this behavior is happening on 3 separate installations on 3 separate machines.
    I will try this anyway and see how I go?
    Cheers
    Di

  • How do I make a pixel stay a pixel?

    It surprises me that after several thousand hours of using InDesign, I still don't know how to place an object and know what InDesign is doing. Amazing, really.
    Playing around with CS6, I thought I'd jump into the Digital Publishing mode and see what goes. I really thought a pixel would have been a pixel, but nothing's ever easy in InDesign. I'd like my placed images to come in pixel-for-pixel. As it is, they come in with this formula:
    Pixel Width (CS6) = Pixel Width (Image) * 72 / (Image DPI)
    So a 989 crop from a slide scanned at 4000 dpi, comes in as a microscopic dot on the CS6 page, with a width of 989 * 72/4000 pixels. At least CS6 does the maths correctly and states the width as 17.802. But I would like the width to be 989 (as shown in the "W" box up top).
    I'm not fussed about whether one image-pixel actually maps to one screen-pixel (that's probably beyond CS6), just a simple: if an image comes in as 989 pixels wide, then CS6 knows it is working with a 989-width image, and displays it as a decent-sized image and not a spec of dust.
    What boxes do I have to tick to achieve that (other than typing in "400000/72 %" in the % box).

    You are approching it from the wrong way, even though you say yourself that
    > [a]t least CS6 does the maths correctly ..
    What would you like, then? That ID does NOT take DPI in consideration?
    There is no "box to tick" to work in pixels. InDesign is designed to work with physical dimensions (since it's meant for print output, NOT screen -- pixel-based). "The" pixel as a measurement unit does not exist.
    To work with pixels and live all of the side effects of that (such as that your image "dimension" will be different on different monitors), you need to work in a pixel-based program, such as Photoshop.

  • How to: Cut Selection to 0 pixels by 0 pixels using alpha channel

    Hello,
    I am trying to understand an action I found online. The action can be used to age a photograph. In this action
    there is a part that cuts a selection 0 pixels by 0 pixels using an alpha channel.
    For the past few days I have tried to duplicate that part of the action. And needless to say: I failed beyond words!
    All I want is to cut away the so called marching ants, not the part inside or outside of the selection, marching ants
    only.
    The original action can be downloaded here:
    http://mutato-nomine.deviantart.com/art/Vintage-Photo-10893481
    Thank you for taking a look.
    Kind regards,
    TackoDing
    (Pardon my English, I'm Dutch)
    Here's an image to give you a rough idea of the final result:

    Silkrooster,
    I only wish to cut the marching ants of the selected portion.
    Unfortenately when I use CTRL+X or EDIT>CUT the whole portion gets cut,
    not just the marching ants (cut selection to 0pixels by 0pixels).

  • Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical spacing?

    Ive been pulling my hair out on how to do this all day and im getting no where i dont even know where to begin! Please help if anyone knows how to do this.

    enforcer4u,
    she said posting here if help was needed was a good idea...
    This is Classroom in a forum.
    I believe the first line should have read Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical > horizontal spacing.
    One way (she may be following this thread, you know) would be to:
    1) create a horizontal/vertical (composition Three/Four) line with the Pen Tool with a length corresponding to the whole composition and two or more Anchor Points, ShiftClickDragging at each with different lengths of the Handles;
    2) Create a vertical/horizontal line by ClickDragging with the Line Tool (or just Click with the Line Tool and set the Length and direction, then move a copy (ShiftAlt/OptionDrag the original, start dragging a tiny bit before you press the keys);
    3) Object>Blend>Blend Options, set Spacing to Specified Steps, 38 steps;
    4) Select the lines from 2) and Object>Blend>Make;
    5) Select both the Blend from 4) and the line from 1) and Object>Blend>Replace Spine.
    Other ways include creating the first line and then ShiftAlt/OptionDragging to create the other lines up/down/left/right depending on composition, or creating or all the lines (maybe using the blend) and then ShiftClickDragging individual lines.

  • What is the policy for dead pixel or stuck pixel in apple store?

    Hi, i'm the new mac user here. I never use the MAC. I just bought it 2 day ago at apple store. I'm so happy when i carry it back to my home. When I turn on my macbook, I think to get 1 DOT bad pixel on my screen......Oh..Is it my fault??? I just bought it and i didn't do anything....I would like to exchange and try to tell the reason that is not my fault..COZ "THIS ITEM IS DEFECT"...I asked the stuff overthere. If i would to return or exchange, I have to pay 10% off restock fee..coz i had already open box. How's come I have to pay it? How can i know is defect or not if i didn't open the box. I just bought it 2 day agos. Is it fair for me?? I'm so upset with apple a lot. I have to take it back and put in front of me and see that dot in the next 3 year.......or as long as this mac gone.
    My question, How u can fix it out for this policy? Do u agree for this policy?
    Macbook   Mac OS X (10.4.9)  

    I had to return my first MacBook for a worse defect. They wanted to hit me with the restocking fee. I called the manager of the Apple Store I went to over and spoke with him. I explained the same thing to him that you stated here...Why should I be penalized for something I couldn't have known about with opening the box. I told him that I want to exchange it for a new one and I would not agree to paying the fee for that. However, I will agree to pay the fee to return it and purchase it from another retailer with a better return/exchange policy. He exchanged it on the spot, no fee.
    My point...plead your case and explain that you are not going to pay a restocking fee for an exchange. Be professional about it. I'm confident you can make it happen.
    You may also want to call Apple first. They can sometimes override the store and direct them to exchange it for you.
    MacBook Black - 2.16 GHz Intel Core 2 Duo   Mac OS X (10.4.9)  

  • Contact Sheet II Function CS - Resolution altering from pixels/inch to pixels/cm

    I am using CS3 with MAC OS X 10.4.11 when I create a contact sheet using File>Automate>Contact Sheet II, I set the 'Resolution' to 72 Pixels/Inch however once the contact sheet is created and I check the image size it has been reset to 28.346 Pixels/cm. This did not happen in CS2
    Does anyone know why this is happening? It is annoying as I have to manually reset the Resolution to Pixels/Inch for each Contact Sheet
    Thanks heaps
    Di

    Hi Ramon,
    Thanks for your suggestion, however the Preferences> Units and Rulers setting does not have anything to do with the Contact Sheet function. The Contact Sheet function itself asks for the Units (which I set to 'cm' as I want to specify the contact sheet dimensions in cm's). The 'Resolution' is a separate setting that I set to 'Pixels/Inch'. I have a friend who is doing exactly the same thing as me and the Resolution gets set correctly as 'per/inch' in the final contact sheet. Their Unit/Rulers preference setting is CM so this proves that it is not related to the contact sheet function.
    The reason I don't think that the preferences is the issue is because this behavior is happening on 3 separate installations on 3 separate machines.
    I will try this anyway and see how I go?
    Cheers
    Di

  • Mission Control/Dash Board are freeze then cause logout. Picture preview with a lot of Weird Pixel (Not dead pixel).

    i cannot use my mission control, laging and freeze, then cuase the system logout. It is same as my DashBoard.
    Additional problem is there a lot weird pixel (dot or spot) on my picture when i preview the picture. I had try reset SMC and PRAM, but the probelm still exist.
    Plese help...
    I had use the EtreCheck, this is the report as below:
    Hardware Information:
              MacBook Pro (Retina, 13-inch, Late 2013)
              MacBook Pro - model: MacBookPro11,1
              1 2.6 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel Iris - VRAM: 1024 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 0:1:31
    Disk Information:
              APPLE SSD SM0512F disk0 : (500.28 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 499.42 GB (152.33 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Configuration files:
              /etc/hosts - Count: 22
    Startup Items:
              MySql_init: Path: /Library/StartupItems/MySql_init
              ZendServer_init: Path: /Library/StartupItems/ZendServer_init
    Launch Daemons:
              [System] com.adobe.SwitchBoard.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer_service.plist 3rd-Party support link
              [System] ZendScriptcase71.plist2 3rd-Party support link
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer_desktop.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              Dropbox
              Google Drive
    Internet Plug-ins:
              AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 3rd-Party support link
              WebClient: Version: 1.0 - SDK 10.6 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              QuickTime Plugin: Version: 7.7.3
              AdobePDFViewer: Version: 10.1.1 3rd-Party support link
              o1dbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 3rd-Party support link
              npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
              googletalkbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              Open in Internet Explorer: Version: 1.0
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
              aThunderPlugIn: Version: (null) - SDK 10.7 3rd-Party support link
              WangwangPlugin: Version: 1.3 - SDK 10.8 3rd-Party support link
              npalicdo: Version: 1.0 - SDK 10.6 3rd-Party support link
              aliedit: Version: 1.0.0.5 - SDK 10.7 3rd-Party support link
    3rd Party Preference Panes:
              Java  3rd-Party support link
    Old Applications:
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              dynamiclinkmanager:          Version: 6.0.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              dynamiclinkmediaserver:          Version: 6.0.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
              ShowHiddenFiles:          Version: 2.0.4 - SDK 10.4 3rd-Party support link
    Time Machine:
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 465.12 GB Disk used: 323.25 GB
              Destinations:
                        Time Machine Backups [Local] (Last used)
                        Total size: 465.44 GB
                        Total number of backups: 5
                        Oldest backup: 2014-01-28 14:49:59 +0000
                        Last backup: 2014-02-17 09:17:15 +0000
                        Size of backup disk: Too small
                                  Backup size 465.44 GB < (Disk used 323.25 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  11%          mds
                   2%          WindowServer
                   1%          EtreCheck
                   1%          mds_stores
                   0%          Google Drive
    Top Processes by Memory:
              147 MB          Dock
              123 MB          mds_stores
              106 MB          Google Chrome
              90 MB          SCIM
              82 MB          ocspd
    Virtual Memory Information:
              5.22 GB          Free RAM
              1.67 GB          Active RAM
              332 MB          Inactive RAM
              802 MB          Wired RAM
              438 MB          Page-ins
              0 B          Page-outs

    i cannot use my mission control, laging and freeze, then cuase the system logout. It is same as my DashBoard.
    Additional problem is there a lot weird pixel (dot or spot) on my picture when i preview the picture. I had try reset SMC and PRAM, but the probelm still exist.
    Plese help...
    I had use the EtreCheck, this is the report as below:
    Hardware Information:
              MacBook Pro (Retina, 13-inch, Late 2013)
              MacBook Pro - model: MacBookPro11,1
              1 2.6 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel Iris - VRAM: 1024 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 0:1:31
    Disk Information:
              APPLE SSD SM0512F disk0 : (500.28 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 499.42 GB (152.33 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Configuration files:
              /etc/hosts - Count: 22
    Startup Items:
              MySql_init: Path: /Library/StartupItems/MySql_init
              ZendServer_init: Path: /Library/StartupItems/ZendServer_init
    Launch Daemons:
              [System] com.adobe.SwitchBoard.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer_service.plist 3rd-Party support link
              [System] ZendScriptcase71.plist2 3rd-Party support link
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer_desktop.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              Dropbox
              Google Drive
    Internet Plug-ins:
              AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 3rd-Party support link
              WebClient: Version: 1.0 - SDK 10.6 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              QuickTime Plugin: Version: 7.7.3
              AdobePDFViewer: Version: 10.1.1 3rd-Party support link
              o1dbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 3rd-Party support link
              npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
              googletalkbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              Open in Internet Explorer: Version: 1.0
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
              aThunderPlugIn: Version: (null) - SDK 10.7 3rd-Party support link
              WangwangPlugin: Version: 1.3 - SDK 10.8 3rd-Party support link
              npalicdo: Version: 1.0 - SDK 10.6 3rd-Party support link
              aliedit: Version: 1.0.0.5 - SDK 10.7 3rd-Party support link
    3rd Party Preference Panes:
              Java  3rd-Party support link
    Old Applications:
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.2 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              dynamiclinkmanager:          Version: 6.0.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              dynamiclinkmediaserver:          Version: 6.0.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
              ShowHiddenFiles:          Version: 2.0.4 - SDK 10.4 3rd-Party support link
    Time Machine:
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 465.12 GB Disk used: 323.25 GB
              Destinations:
                        Time Machine Backups [Local] (Last used)
                        Total size: 465.44 GB
                        Total number of backups: 5
                        Oldest backup: 2014-01-28 14:49:59 +0000
                        Last backup: 2014-02-17 09:17:15 +0000
                        Size of backup disk: Too small
                                  Backup size 465.44 GB < (Disk used 323.25 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  11%          mds
                   2%          WindowServer
                   1%          EtreCheck
                   1%          mds_stores
                   0%          Google Drive
    Top Processes by Memory:
              147 MB          Dock
              123 MB          mds_stores
              106 MB          Google Chrome
              90 MB          SCIM
              82 MB          ocspd
    Virtual Memory Information:
              5.22 GB          Free RAM
              1.67 GB          Active RAM
              332 MB          Inactive RAM
              802 MB          Wired RAM
              438 MB          Page-ins
              0 B          Page-outs

  • Dead pixel or stuck pixel??

    Hi,
    Have just received my Core 2 MacBook, I'll cut straight to the problem.
    There's one problem pixel on the display. A little way below and left of the centre of the screen. The pixel is black when on a white, red or blue screen, however the pixel is capable of displaying green, i.e. when I pass a green panel over it, it appears as normal.
    Does this indicate that the pixel is dead, or merely stuck? Or to ask my question in another way, will the Pixel Widget (or similar flashy thing ) have any effect on it?
    Thanks in advance.

    Hello
    I had 6 dead pixels on my macbook pro screen. I was quite annoyed about it.
    After a huge research I did find solution. At least you can try it is for free
    It is a small Jawa applet which flickers and can unstuck pixels.
    I had 6 dead pixels. After using this flickering applet for 10 minutes 4 of the pixels disappeared They were in the center of the screen.
    The last two are placed on the top of the screen. On the top dock where the blue apple is. Fortunately there is no way I know about how to hide this dock. Therefor stuck pixels remain. (if you know how to get this flickering applet over entire screen please let me know, the videos on the website did not work for me)
    Anyway check this website and good luck, Hope it helps.
    http://www.jscreenfix.com/basic.php
    MIKE

  • Stuck pixel or dead pixel?

    I have a question I'm hoping someone can help me with. I recently purchased a macbook off of craigslist. It was purchased by the original owner in February so is still under warranty. A few days ago I noticed a single dead/stuck pixel in the lower left part of the screen. Not sure if it has always been there and I just didn't notice it or if it just popped up. On a white screen it appears slightly reddish, on a red screen it's not visible, on a blue screen it's not visible, and on a green screen it's black. My first question is whether this would be a stuck pixel or a dead pixel? And secondly, do I have any chance at all of this being fixed under the warranty? I don't have a Apple store in my area or I would take it in there to get looked at, so I'm relying on you guys for support. I've tried using the various "stuck pixel fixer" images on the net that flash colors, nothing seems to work. I tried lightly massaging the pixel, but am not really crazy about putting too much pressure on the display.

    That's an odd combination of appearances. If it's not visible on red or blue then I would assume it's a stuck pixel rather than a dead one (which should appear 'off'/black on every background colour), although it should only disappear in sympathy with the colour on which it is stuck (i.e. either red or blue, not both).
    You can phone Applecare and ask them about it, but I think you'll find they'll only do something about it if you have a certain number of 'pixel anomalies'.
    See here: http://support.apple.com/kb/HT1721?viewlocale=en_US
    Best of luck with it.

  • Dead pixel repair, dead pixel repair

    I have a dead pixel in my macbook pro (black pixel), there's any software or video to repair that??? Thank you so much.

    Hi l,
    In the "old days" of LCDs, some people had success "massaging" the affected area. I wouldn't put to much hope into that, but it's something you can try.

  • Screen Tearing/Pixelated into White Pixelated Startup Screen?

    Hello,
    Two days ago my screen started to really show some weird things, my screen would begin to tear/pixelate and show weird stuff, this happened more often when i scrolled the page. Here are some screenshots to show you what i mean:
    Screen 1: http://oi46.tinypic.com/10ckhmh.jpg
    Screen 2: http://oi48.tinypic.com/15bw3k.jpg
    Note: This was not a browser issue, this happened all over my screen no matter what application i had open at the time.
    So after this i tried to lower my screen resolution, in a wild hope that it would fix this problem, so i lowered my resolution from 2560 x 1440 to 1920 x 1440
    When this happened my screen got white with a few black dots on it, i could move my mouse but nothing else, when i clicked somewhere with my mouse nothing happened, i could just move it around the white pixelated screen.
    So i shut down my computer with the button, it was the only way i could do it, and i started it again, now my computer would boot up in this white pixelated screen and there is absolutely nothing i can do, i can't take any action or open any program or whatsoever.. Here's a picture of what i get:
    Screen: http://oi49.tinypic.com/34q1vkl.jpg
    So after this happened i tried booting into safe mode and safe mode works fine, no screen problem whatsoever, i tried looking for fixes to this problem and so far:
    Things i've tried that did not work so far:
    - Resetting PRAM (Command+Alt+P+R when booting)
    - Taking the power out of my mac and holding the power button for 10+ seconds
    - Hardware test (No problems were found)
    - Deleting the file " /Users/<yourname>/Library/Preferences/ByHost/com.apple.windowserver.XXXXX.plist "
    So any help would be greatly appreciated, i am at a lost here currently..
    Thanks in advance!

    UPDATE
    I managed to solve my start up problem by deleting the file on my iMac HD instead of the /User/Myname Library. I am talking about this Library/Preferences/com.apple.windowserver.plist"
    So i can boot my computer into normal mode again so that's fine, however the first problem still persists
    Screen 1: http://oi46.tinypic.com/10ckhmh.jpg
    Screen 2: http://oi48.tinypic.com/15bw3k.jpg
    And it seems like its gotten worse when i open big programs like Ableton (Music Creation) or Adobe Photoshop. So any advice here would be greatly appreciated

  • Half way pixel between two pixels

    hi there guys,
    i'm new in this forum
    i'm working on this aLife simulation and i need to find co-ordinates of a pixel between two others on an image.
    so, pixel A(x1,y1) and pixel B(x2,y2) and suppose there's a line between them
    i would need the pixel C(x3,y3) that lies in the exact middle of the distance between these two pixels
    i have a function that determines the distance between them but no way of finding out what that half way pixel is
    please help cause this is somewhat urgent
    thanks in advance for your time

    I am sorry, but I took programming in college. What you are asking for is the distance equation, which you should have learned in high school algebra. That equation is simply as follows:
    d = sqrt((x2 - x1)^2 + (y2-y1)^2)
    where:
    "sqrt" means take the square root
    d is the distance between the points
    The points are (x1,y1) and (x2,y2)
    "^2" means to square that portion of the equation
    When you are doing a line in a 3-dimensional space, the distance equation becomes the following:
    d = sqrt((x2-x1)^2 + (y2-y1)^2 + (z2-z1)^2)
    where:
    the points are (x1,y1,z1) and (x2,y2,z2)
    This is a basic computer programming problem, and if you need to ask on a forum like this for help, maybe you should consider changing majors. (I am not trying to be cruel, but let's face it, there are much more difficult problems you will be presented with in your studies than this one. It does not matter whether you are writing this code with JAI, or without, or with Java, C++, Fortran, COBOL, Perl, or any other language. The logic is the same for this calculation regardless of languages and/or libraries used.)

  • How can I reduce a photo form 1856x1152 pixels to 720x480 pixels when there is no pixel option?

    I just purchased PhotoShop12 and am trying to reduce a photo that is 1856 x1152 pixels to a photo that would be 720x480 pixels, but the only options offered on the drop-down image size menu are:
    percent, inches, cm, mm, points, picas and columns.  There is no pixel option.  How do I get a pixel option?

    Also note that if you check 'Resample Image' you can then specify pixels in the top part of the resize window but, as hatstead says, this is only sensible if you are maintaining an aspect ratio or if the image is abstract and you don't mind distortion.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Maybe you are looking for

  • Regarding the Delta Logic in the Report

    Hi Abap gurus, i have selection screen for 3 fields in one block called material, plant and extract date.  if the user selects the extract date as todays date then data has to fetch the as per todays date.  i have two radio buttons on the selection s

  • How to capture mapping error and able to send it..

    Hi Friends, We have a requirement, where in, if a mapping fails due to missing required element or improper formation of the source xml message, we need to capture this and need to create an error message, which contains the error description as one

  • Can I have Internet Explorer for Mac, Can I have Internet Explorer for Mac

    I am looking for IE for Mac

  • GUI_UPLOAD WITH ASCII CHARACTERS

    Hi ABAPers, Im using GUI_UPLOAD FM...here is my parameters : filename C:\OR.XLS filetype   ASC has_field_separator X My file to be upload has a format like this : 100001   DELA CRUZ, JUAN   MMC but unfortunately...upon pressing F8...there are 22 entr

  • Maintaining length of originally recorded clips

    I was pretty good with iMovie 6 and my miniDV camcorder, but now am working with a Canon HF11 HD camera (flash memory) and iMovie 7.1.4 and it is like starting over again. Sorry to ask what is probably a very basic question, but thanks in advance for