3750X Prompts for Device/Enable Password Instead of Local Username/Password

I've got two 3750X switches that were built from a fairly basic template from my existing 3750/3560 switches. However, these new switches ONLY prompt for the device/enable passwords instead of the configured local username/password when connecting by console/telnet/ssh. Here's the config that I think is relevant, sans password strings. Only real difference is that the new switches are running an IOS 15.2 build, the 3750 switches are running 12.4, and the 3560 is currently running 15.0 (pending an update).
enable secret 5 string
username Administrator privilege 15 secret 5 string
line con 0
password 7 string
login local
line vty 0 4
password 7 string
login local
length 0
line vty 5 15
password 7 string
login
length 0
Any way to correct this?
Thanks!

usually you need "login local" under all the vty lines in order to authenticate locally unless you use ACS server for authentication.
HTH

Similar Messages

Dialing number phone prompts for To:UNKNOWN NUMBER instead of Enter Code

I have successfully Applied FAC (force authorization code), after dialing number phone prompts for To:UNKNOWN NUMBER instead of ENTER AUTHORIZATION CODE to complete the call, Also I would like to extend the delay for few more seconds so user can get enough time to enter code before busy tone.

Dear, I am unable to find any option which may let me configure the PROMPT from SERVICE PARAMETERS => Cisco Call Manager ...., which must be set ENTER AUTHORIZATION CODE whenever user dials long distance call. We have CCM 4.1.2

File sharing from mac to android device/phone tablet...(username/password invalid)

i want to stream files from macbook pro to an android device (tablet and phone)
i have set up the directories i want to share on the mac...
and on the android device i have installed different apps, but nothing works... it is detecting the macbook but its asking for a username and password
i use the username/pw i use to login to the mac, but that doesn't work it says its invalid
i have tried plex. bs player. es file explorer..
please advise?

You can find the solution here:
http://discussions.apple.com/thread.jspa?messageID=4284885
Windows Vista includes security enhancements to file sharing, and defaults to NTLMv3 authentication, but your Mac thinks it's NTLMv2 (you can see the login failures in /var/log/samba/smbd.log). You need to tell Vista that it's OK to use an older version of NTLM.
1. Run "regedit.exe" and open this key:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Lsa
2. If it doesn't already exist, create a DWORD value named
LmCompatibilityLevel
3. Set the value to 2 (if that doesn't work, lower it to 1)

I want to erase the automatic sign-in of username & password for facebook, because firefox always rfemembers my username & password. How will i disable it? please help.. thanks

How will i disable the auto sign in of my username & password for facebook?

If you saved the password in Firefox, you can clear that here:
orange Firefox button > Options > Security > "Saved Passwords"
''or''
Tools menu > Options > Security > "Saved Passwords"
It's also possible that you have a cookie that keeps you logged in, but in that case, signing off from Facebook should end your session.

HT201441 the device has already been erased, but is still linked to the previous owner's account, you will be prompted for the previous owner's Apple ID and password during the device setup and activation process

I could not contact the previous owner so that can help me the way you have described

The Help page you came here from gives you all the information; without the previous owner's password or his removing the phone from his list of devices you cannot proceed and I'm afraid your phone is useless.

Versalink username/password vs. Verizon username/password

The Versalink 7500 DSL modem/router has a username and password setting. For hardwired (as opposed to wireless) use, do the username and password need to be set at all, and if so should they be set to my Verizon DSL username and password or to something else?
The context in which I am asking is that I am using the Versalink for the first time with an existing Verizon DSL account. The PC is connected to the Versalink with an ethernet cable and is itself new, running Windows 8. The computer seems to automatically connect to the internet (successfully, it appears) but I cannot sign into my Verizon account. When I try, error 651 (a nonspecific modem error) is generated.

As long as a router is handling a WAN IP, you do not need to setup your computer to connect to the PPPoE Server.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

UAC Behaviour when set to "Prompt for Consent on the Secure Desktop"

We are in the process of testing UAC on Windows 8.1. UAC is enabled for admins and the setting for "Behavior of the elevation prompt for administrators in Admin Approval mode" is set to "Prompt for consent on the secure desktop".
This results in the administrator having to go through three separate prompts in order to execute the function which required elevation.
First there is a dialog which gives the options "I want to complete this action by entering my credentials on the authentic Windows sign-in screen" or "I don't want to complete this action"
Second there is a prompt to press CTRL-ALT-DEL to enter your credentials
Third there is the prompt for consent on the secure desktop.
Is there a way I can configure UAC to not have the first two prompts?

Hi Fangzhou and thanks for the reply. The action is just to "Run as Administrator" on anything. Perhaps I should share the full set of settings I have in group policy:
User Account Control: Admin Approval Mode for the Built-in Administrator account
Enabled
User Account Control: Allow UIAccess applications to prompt for elevation without using the secure desktop
Disabled
User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode
Prompt for consent on the secure desktop
User Account Control: Behavior of the elevation prompt for standard users
Prompt for credentials on the secure desktop
User Account Control: Detect application installations and prompt for elevation
Enabled
User Account Control: Only elevate executables that are signed and validated
Disabled
User Account Control: Only elevate UIAccess applications that are installed in secure locations
Enabled
User Account Control: Run all administrators in Admin Approval Mode
Enabled
User Account Control: Switch to the secure desktop when prompting for elevation
Enabled
User Account Control: Virtualize file and registry write failures to per-user locations
Enabled

Prompted for a serial number when opening CC CS6 products

Hi all,
I'm trying to do final user testing for my team who are all signed up to CC for teams membersip. We're unfortuately bound by the limitations of Windows XP (yes really!) and so Adobe advised our IT team to d/l an older version of the cloud (so to speak) which is compatible. The CS6 master collection was downloaded and installed fine following this, but when I try to launch the products using my Adobe ID on our test machine, it prompts for a serial number instead of linking it with my membership.
I have tried all the troubleshooting options, like language preference and adding an address etc. Nothing has changed the current status.
Please can someone advise how to fix the problem?
Many thanks,
Louise

>just downloaded creative cloud, started with After Effects. I haven't downloaded any other apps
What program are you using to try and open the PDF?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link

Certificate selection and PIN entry include username/password

Our users are using Windows 7 and Internet Explorer.
When they visit a page that requires client authentication, they're prompted to "Select a certificate". However, their certificates are loaded below a username/password prompt.
When they select a certificate, during the PIN prompt, it also has a username/password prompt. They can't enter a PIN without clicking below to the PIN prompt, which is very irritating for users.
How do I disable the username/password prompt when selecting a certificate?
Thanks.

Hi,
Did you use IIS?
If yes, try the methods in this article:
Why do I still get a user/password Login prompt with Integrate Authentication (for Virtual server 2005 Administration website)
Remove Username-Password Prompts from the Web Module with Windows Authentication
Meanwhile, please post this issue in asp.net forum for more professional help.
http://forums.asp.net/
If no, give us a screenshot about your issue.
Karen Hu
TechNet Community Support

Problem while setting username password to router

Hi,
i am trying to connect to router using java program. i am connecting with out any problem.
while giving the credentials like username and password i can't placing the original username
password.instead some thing is setted.
here is my code
   public class ConnectRouter
    public static void main(String[] args) throws Exception {
    try
    if (args.length != 2) {
    System.err.println("Usage: java router username and password");
    System.exit(1);
    String password = URLEncoder.encode(args[0], "US-ASCII");
    String username=URLEncoder.encode(args[1],"US-ASCII");
    URL url = new URL("http://192.168.0.75:23");
    URLConnection connection = url.openConnection();
    connection.setDoOutput(true);
        System.out.println("connection obj got");
    PrintWriter out = new PrintWriter(connection.getOutputStream());
    out.println(username);----------------------------------------------------------------------------------------------->passing username
    out.println(password);------------------------------------------------------------------------------------------------>passing password
        Process p = Runtime.getRuntime().exec("cmd /c perl C:\\perlsrc\\uname.pl");
    // out.println(args[0]);
        System.out.println("-----------connected---------------");
    out.close();
    BufferedReader in = new BufferedReader(new InputStreamReader(connection.getInputStream()));
    String inputLine;
    while ((inputLine = in.readLine()) != null)
    System.out.println(inputLine);
    in.close();
    }catch(Exception e){e.printStackTrace();}
    }output is as follows:
connection obj got
-----------connected---------------
ÿûÿûÿýÿý
User Access Verification
Username: POST / HTTP/1.1--------------------------------------->here something is placed instead of my username
Password:
% Authentication failed.
Username: Host: 192.168.0.75:23--------------------------------->here something is placed instead of my username
Password:
% Authentication failed.
Username: Connection: keep-alive
Password:
% Authentication failed.
Process exited with exit code 0.
please explain me where i am missing???
Regards,
Nagaraju

Hi ejp,
i done as follows even i am getting same problem
please help me
   public class ConnectRouter extends Authenticator
        static String username,password;
    public static void main(String[] args) throws Exception
        Authenticator.setDefault(new ConnectRouter());
    try
    if (args.length != 2) {
    System.err.println("Usage: java router username and password");
    System.exit(1);
     password = URLEncoder.encode(args[0], "US-ASCII");
     username=URLEncoder.encode(args[1],"US-ASCII");
    URL url = new URL("http://192.168.0.75:23");
    URLConnection connection = url.openConnection();
    connection.setDoOutput(true);
        System.out.println("connection obj got");
    PrintWriter out = new PrintWriter(connection.getOutputStream());
    out.println(username);
    out.println(password);
        Process p = Runtime.getRuntime().exec("cmd /c perl C:\\perlsrc\\uname.pl");
    // out.println(args[0]);
        System.out.println("-----------connected---------------");
    out.close();
    BufferedReader in = new BufferedReader(new InputStreamReader(connection.getInputStream()));
    String inputLine;
    while ((inputLine = in.readLine()) != null)
    System.out.println(inputLine);
    in.close();
    }catch(Exception e){e.printStackTrace();}
    //@ovverriding the getPasswordAuhtentication method
    protected PasswordAuthentication getPasswordAuthentication()
        System.out.println("int the password authentication method");
        return new PasswordAuthentication(username,password.toCharArray());
    }output::
connection obj got
-----------connected---------------
ÿûÿûÿýÿý
User Access Verification
Username: POST / HTTP/1.1--------------------------------------->here something is placed instead of my username
Password:
% Authentication failed.
Username: Host: 192.168.0.75:23--------------------------------->here something is placed instead of my username
Password:
% Authentication failed.
Username: Connection: keep-alive
Password:
% Authentication failed.
Process exited with exit code 0.
please explain me where i am missing again???
Thanks in advance,
Nagaraju.

Publish ESB without username/password of connection using Jdeveloper

Hi,
I have used jdeveloper10.1.3.3 to developer BPEL Process and ESB services.
I have created a Application Server Connection in jdeveloper with hostname, url path and RMI Port right, but without username and password.
I have created a Integration Server Connection mapping the connection above. I tested this Integration Server and the result was:
Application Server: FAILED
BPEL Process Manager Server: OK
ESB Server: OK
After the test of Integration Serve Connection , I tried register my ESB project using the action "Register witn ESB" from Jdeveloper and the result was the error:
"Reload services from ESB Server failed while trying to query service definitions from server."
After the registry, I saw in the ESB Crontol that the ESB Service was publish.
Question:
Is possible resgistry a ESB service with URL connection correct, but without username and password of Application Server Conncetion from Jdeveloper?
Is there any configuration for validat of username and password of Application Server Connection in the publish of ESB service?
Is a bug of jdeveloper?
Thanks,
Fabrício.

Hello. I'm pretty sure you cannot register an ESB with no username/password - it uses the username/password information in the integration server connection properties to login and deploy. We were surprised that BPEL uses ant build properties so you can specify the name/password, ESB does not - it only uses the integration server connection info.
In 10.1.3.4 (which we don't have yet) the ability to use ant for ESB deploys has been added.
Daren
Edited by: djcasey on Jan 30, 2009 11:12 AM

WorkflowCA: [SYS] ORA-01017: invalid username/password; logon denied

Hi,
Please help me, I get below error when I configure Workflow Configuration Assistant 2.6.4.0.0 - Linux
Workflow Configuration Assistant 2.6.4.0.0 - Linux
WFCA Version: : WorkflowCA.java 26.106 2005/06/29 04:33
WorkflowCA:
WorkflowCA: Workflow Configuration in progress...
WorkflowCA: Tue Feb 16 21:08:57 GMT+05:30 2010
WorkflowCA:
WorkflowCA: Screen width -1024-, screen height -768-
WorkflowCA:
WorkflowCA: Graphics User Interface mode
WorkflowCA:
WorkflowCA:
WorkflowCA: Start testing connection, which takes less than 3 minutes.
WorkflowCA:
WorkflowCA: Account connection test for SYS
WorkflowCA: [SYS] ORA-01017: invalid username/password; logon denied
WorkflowCA: Unable to connect to jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=abc.d.com)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PROD)))
java.lang.Exception: Invalid connection
     at oracle.apps.fnd.wf.install.db.WorkflowCA.createJDBCConnection(WorkflowCA.java:4806)
     at oracle.apps.fnd.wf.install.db.WorkflowCA.createSYSConnection(WorkflowCA.java:4902)
     at oracle.apps.fnd.wf.install.db.WorkflowCA.schemaCreation(WorkflowCA.java:1039)
     at oracle.apps.fnd.wf.install.db.WfFrame.actionPerformed(WfFrame.java:2051)
     at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWButton.processActionEvent(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at oracle.ewt.button.PushButton.activate(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Component.java:5266)
     at java.awt.Container.processEvent(Container.java:1966)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Component.java:3968)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1778)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
WorkflowCA: Tue Feb 16 21:09:19 GMT+05:30 2010
WorkflowCA: java.lang.Exception: Invalid connection (0)
WorkflowCA: Terminating...
Regard's
Rerry

Hi,
please check ur using password file or not,if ur not using then create a passwordfile,if ur using password file then check its is corrupted or not by connecting to database using below string
sys/xxx@TWO_TASK as sysdba
for creating password file follow below document
dont forget to set remote_login_passwordfile = exclusive in initSID.ora file
ORA-01994: GRANT failed: password file missing or disabled [ID 392027.1]
dont forget to grant sysdba to sys in database and change the sys password in order to get it added in password file then check with below connection string
sys/xxx@TWO_TASK as sysdba
Regards
Edited by: Ahmed@hungry_dba on Feb 16, 2010 8:13 PM

Invaild username/password error

Hi All,
Today when i log into my testing database with sys password, it says invalid username/password
I create new password file after seeing this but getting the same error
Then i check environment variables settings
But still getting the same problem
Regards,
Vikas

The invalid password is totally different from this error.
ORA-12154:
TNS:could not resolve the connect identifier specified
Cause: A connection to a database or other service was requested using a connect identifier, and the connect identifier specified could not be resolved into a connect descriptor using one of the naming methods configured. For example, if the type of connect identifier used was a net service name then the net service name could not be found in a naming method repository, or the repository could not be located or reached.
Action:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
- Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is accessible.
- Verify that the net service name or database name used as the connect identifier is configured in the directory.
- Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Make sure the host, port and service name specified are correct.
- Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.So the first check, do you have the right TNSNames entry (that you are trying to use) in your tnsnames.ora ?
Aman....

Outlook 2013 - Exchange 2013 - Prompts for username and password when EWS basic authentication is enabled

So we have an Exchange 2013 environment, and a CRM solution that requires basic authentication to EWS internally. Problem is, after a reboot of our Exchange server, all of our Outlook clients begin prompting for username and password (which nothing
works) which also starts locking users AD accounts out due to failed login attempts (somehow). If I disabled basic authentication on EWS, Outlook authenticates as normal using NTLM and there are no issues. Once Outlook has authenticated, I can
turn back on basic authentication, and Outlook will be fine until the next time the Exchange server is rebooted.
Any ideas?

Hi,
According to your description, I understand that Outlook client prompted for username and password when Exchange server restart and basic authentication is enabled for EWS.
If I misunderstand your concern, please do not hesitate to let me know.
It’s normal. This caused by the difference between basic authentication and NTML authentication:
Basic, with any version of Outlook prior to 2010, results in a pop up dialog asking for creds. Outlook 2010 makes the 'save this password' actually work, so in an Outlook 2010 or later world, Basic can mean no need to authenticate every time you open/reconnect,
but in all earlier versions, you will have to enter creds every time.
NTLM, when used by a client that is domain joined and logged in with cached creds, results in the client simply sending the cached in creds to the server, resulting in what looks like a pretty seamless single sign on experience. However, if you want to do pre-authentication
at something like TMG, and not let the traffic go all the way to CAS, you need to configure TMG for this.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Windows 8.1 default logon prompt for smart card instead of username/password

Hello,
We are currently in our pre-deployment test phase for Windows 8.1 and are trying to knock out the high visibility problems that we notice. One of the issues we've noticed:
When logging into Windows, the default prompt is for a username/password. all of our users are using smart cards, so they have to click "sign-in options", click the smart card icon, and then enter their PIN. How would I change the startup
screen to default to smart card?
Also, when locking the screen by removing the card it again prompts for the username/password when unlocking the screen. So the users again have to click on "sign-in options" and select the smart card, otherwise they risk locking out their
account by entering the PIN in the username/password field.
when locking the screen via ctrl-alt-del or windows-L unlocking does default to the smart card, so I know it can be done!
thanks,
-Nick

Hi,
I'm afraid we couldn't change the Sign-in Options order, I checked GP and Registry, there is no way to do it.
However, there is another way is just enable "Require smart card" In GP. While after this policy enabled, All users will have to use smart cards to log on to the network. This means that the organization must have a reliable public key infrastructure (PKI)
in place, and provide smart cards and smart card readers for all users.
Location: GPO_name\Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options
Roger Lu
TechNet Community Support

3750X Prompts for Device/Enable Password Instead of Local Username/Password

Similar Messages

Maybe you are looking for