4G LTE data very slow or nonexistent in San Diego inland North County area?

Over the past few weeks I've noticed my phone being a bit slower than usual with data speeds in terms of loading a web page, various, apps, etc. Phone is a HTC Thunderbolt.
However this week since 1/6/2014 and usually in the morning when I'm at work (Poway, CA 92064) my data is VERY slow and goes all over the place from 4G LTE to 3G to 1X and even spends periods of time with no data connection whatsoever even though I have several bars of service. Was just out to lunch in San Diego/Scripps Ranch 92131 and still had 1X or no data service at all. This is becoming downright unacceptable as I am paying for this service and it's nonexistent for large periods of time.
I'm not sure this is limited to a local problem though. My partner is in the Bay Area hundreds of miles away from here and he said his phone (HTC Rezound) the other day also spent a lot of time on 1X and wore his battery down unusually early searching for a data signal.
Verizon...what the heck? What's up?

It may be that there working on the system in your area or are they having any special events in your when they do that can tax the system some what and it cause what your seeing.. You might want to give Customer Service a call and ask for a Tech Rep.. see if there having any issues in your area and while your on the phone with them, have them check your PRL code.. it may need updating and the rep may have to push it to your phone.. b33

Similar Messages

Mobile LTE data very slow - 80026

I have been experiencing a massive drop off in data of up and down data speeds in Lafayette, Colorado (80026).
Speedtest is giving me anywhere from 47ms to 457ms pings and data speeds up/down of as low as .54/.28 respectively. This is becoming more and more frequent with the tests trending slower and slower.
I've reset the device and network setting on the phone (iPhone 5s) to no avail. It shows 2 or 3 bars and "LTE" when these tests are run.
Not quite sure what the next steps are for troubleshooting or reporting this as the Support sections oddly make no mention of connectivity or data speed issues as topics. Or if they do, they are buried deep or in a category I am not identifying. Something that would presumably be near the top of users' support issues, I would have thought would warrant higher level visibility. Perhaps room for improvement for customer support there?
Anyway, any thoughts? Is this a temporary issue? Where should I be reporting this? What remedies, if any, should I be seeking? Are there prescribed troubleshooting steps?
Also also, the "tags" field in this forum software doesn't seem to support ZIP codes as a standalone tag as it won't let me enter more than two digits (Mac 10.9.5, Chrome 39.0.2171.99).

Hi Sarah, thank you too... I'll likewise try to answer as best I can, as well as add a bit more data:
I haven't been able to identify a pattern as to when the slowdowns happen except that it is happening far more often than it used to. I'll try and log it.
I am using the Ookla Speedtest tool (as it is installed and convenient on the device) to ping a variety of networks and test up/down speeds with sample packets. If I am feeling very fancy or annoyed I sometimes even tether my computer and run more advanced network tests from the terminal so I can see if there is a routing issue. But as of yet, the slowdowns appear to be entirely in Verizon IPs.
The bit more data: my wife and neighbors who are on Verizon are also telling me that they are seeing significant data slowdowns regularly from Lafayette (80026) as well as in south Longmont (80501). None of them have reported it to Verizon as they "don't know how", not that I blame them as "data speeds" or something of that ilk is not a service category under the predefined "Topics" for some reason... and my wife leaves these sort of things up to me anyway.

IOS7 wifi and LTE speed very slow.

iOS7 wifi and LTE speed very slow compared to iOS6. This was proven with Safari and using speed test app.

I have exactly the same problem symptom ever since installing iOS7. Toggling the FaceTime or the LTE settings alleviated the problem until I installed the latest version on IOS (7.0.4- 11B554a). Now the bug is permanent, a Network Reset will not work anymore, a System Reset will work only for the first execution of Speedtest.
Looks like the network software is throttling LTE speed to the minimum (.50 Mbps) up/download speed no matter what. Now unlimited Data means nothing, maybe AT&T wants me to go to Verizon or Tmobile.
I reported this problem to AT&T Sept 26 when I first installed IOS7, they told me there was no problem really that I needed to wait for the LTE network congestion to go away...? Since I found a circumvention by toggling LTE I did not pursued the problem...
After reporting the problem again this morning, they sent me to the AT&T store to change the SIM card.... I will try this and report back if it fixes the problem... Although I doubt it will fix anything but burn and extra hour of my day. The AT&T rep said that if the new SIM card doesn't fix the problem I need to go to Apple for them to give me a new Iphone....???? I guess there are many iPhones gone bad after installing IOS7 (sarcasm).
If you have this same problem, please post here so that I am able to get back to AT&T with some leverage to get them to remove the choking of LTE. Basically, if everyone accepts the new low speeds, then, unlimited data is no longer a problem for this phone company.

Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in the area.How sld I get an OS X lion to my CP?

Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in my area.How should I get an OS X lion to my CP? Is it possible to get it from another MacBook pro?Or is it possible to recover the erased OS X Lion without or with external disc?
Thank you

Hi OGELTHORPE!
Thank you for your advice but I don't know where i can get it and where to get it. Also I don't know also how to use it.
Could you please keep on helping me?
Regards!

SQL loader load data very slow...

Hi,
On my production server have issue of insert. Regular SQL loder load file, it take more time for insert the data in database.
First 2 and 3 hours one file take 8 to 10 seconds after that it take 5 minutes.
As per my understanding OS I/O is very slow, First 3 hours DB buffer is free and insert data in buffer normal.
But when buffer is fill then going for buffer waits and then insert is slow on. If it rite please tell me how to increase I/O.
Some analysis share here of My server...................
[root@myserver ~]# iostat
Linux 2.6.18-194.el5 (myserver) 06/01/2012
avg-cpu: %user %nice %system %iowait %steal %idle
3.34 0.00 0.83 6.66 0.00 89.17
Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
sda 107.56 2544.64 3140.34 8084953177 9977627424
sda1 0.00 0.65 0.00 2074066 16
sda2 21.57 220.59 1833.98 700856482 5827014296
sda3 0.00 0.00 0.00 12787 5960
sda4 0.00 0.00 0.00 8 0
sda5 0.69 2.75 15.07 8739194 47874000
sda6 0.05 0.00 0.55 5322 1736264
sda7 0.00 0.00 0.00 2915 16
sda8 0.50 9.03 5.24 28695700 16642584
sda9 0.51 0.36 24.81 1128290 78829224
sda10 0.52 0.00 5.98 9965 19004088
sda11 83.71 2311.26 1254.71 7343426336 3986520976
[root@myserver ~]# hdparm -tT /dev/sda11
/dev/sda11:
Timing cached reads: 10708 MB in 2.00 seconds = 5359.23 MB/sec
Timing buffered disk reads: 540 MB in 3.00 seconds = 179.89 MB/sec
[root@myserver ~]# sar -u -o datafile 1 6
Linux 2.6.18-194.el5 (mca-webreporting2) 06/01/2012
09:57:19 AM CPU %user %nice %system %iowait %steal %idle
09:57:20 AM all 6.97 0.00 1.87 16.31 0.00 74.84
09:57:21 AM all 6.74 0.00 1.25 17.48 0.00 74.53
09:57:22 AM all 7.01 0.00 1.75 16.27 0.00 74.97
09:57:23 AM all 6.75 0.00 1.12 13.88 0.00 78.25
09:57:24 AM all 6.98 0.00 1.37 16.83 0.00 74.81
09:57:25 AM all 6.49 0.00 1.25 14.61 0.00 77.65
Average: all 6.82 0.00 1.44 15.90 0.00 75.84
[root@myserver ~]# sar -u -o datafile 1 6
Linux 2.6.18-194.el5 (mca-webreporting2) 06/01/2012
09:57:19 AM CPU %user %nice %system %iowait %steal %idle
mca-webreporting2;601;2012-05-27 16:30:01 UTC;2.54;1510.94;3581.85;0.00
mca-webreporting2;600;2012-05-27 16:40:01 UTC;2.45;1442.78;3883.47;0.04
mca-webreporting2;599;2012-05-27 16:50:01 UTC;2.44;1466.72;3893.10;0.04
mca-webreporting2;600;2012-05-27 17:00:01 UTC;2.30;1394.43;3546.26;0.00
mca-webreporting2;600;2012-05-27 17:10:01 UTC;3.15;1529.72;3978.27;0.04
mca-webreporting2;601;2012-05-27 17:20:01 UTC;9.83;1268.76;3823.63;0.04
mca-webreporting2;600;2012-05-27 17:30:01 UTC;32.71;1277.93;3495.32;0.00
mca-webreporting2;600;2012-05-27 17:40:01 UTC;1.96;1213.10;3845.75;0.04
mca-webreporting2;600;2012-05-27 17:50:01 UTC;1.89;1247.98;3834.94;0.04
mca-webreporting2;600;2012-05-27 18:00:01 UTC;2.24;1184.72;3486.10;0.00
mca-webreporting2;600;2012-05-27 18:10:01 UTC;18.68;1320.73;4088.14;0.18
mca-webreporting2;600;2012-05-27 18:20:01 UTC;1.82;1137.28;3784.99;0.04
[root@myserver ~]# vmstat
procs -----------memory---------- -swap -----io---- system -----cpu------
r b swpd free buff cache si so bi bo in cs us sy id wa st
0 1 182356 499444 135348 13801492 0 0 3488 247 0 0 5 2 89 4 0
[root@myserver ~]# dstat -D sda
----total-cpu-usage---- dsk/sda -net/total- -paging -system
usr sys idl wai hiq siq| read writ| recv send| in out | int csw
3 1 89 7 0 0|1240k 1544k| 0 0 | 1.9B 1B|2905 6646
8 1 77 14 0 1|4096B 3616k| 433k 2828B| 0 0 |3347 16k
10 2 77 12 0 0| 0 1520k| 466k 1332B| 0 0 |3064 15k
8 2 77 12 0 0| 0 2060k| 395k 1458B| 0 0 |3093 14k
8 1 78 12 0 0| 0 1688k| 428k 1460B| 0 0 |3260 15k
8 1 78 12 0 0| 0 1712k| 461k 1822B| 0 0 |3390 15k
7 1 78 13 0 0|4096B 6372k| 449k 1950B| 0 0 |3322 15k
AWR sheet output
Wait Events
ordered by wait time desc, waits desc (idle events last)
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn
free buffer waits 1,591,125 99.95 19,814 12 129.53
log file parallel write 31,668 0.00 1,413 45 2.58
buffer busy waits 846 77.07 653 772 0.07
control file parallel write 10,166 0.00 636 63 0.83
log file sync 11,301 0.00 565 50 0.92
write complete waits 218 94.95 208 955 0.02
SQL> select 'free in buffer (NOT_DIRTY)',round((( select count(DIRTY) N_D from v$bh where DIRTY='N')*100)/(select count(*) from v$bh),2)||'%' DIRTY_PERCENT from dual
union
2 3 select 'keep in buffer (YES_DIRTY)',round((( select count(DIRTY) N_D from v$bh where DIRTY='Y')*100)/(select count(*) from v$bh),2)||'%' DIRTY_PERCENT from dual;
'FREEINBUFFER(NOT_DIRTY)' DIRTY_PERCENT
free in buffer (NOT_DIRTY) 10.71%
keep in buffer (YES_DIRTY) 89.29%
Rag....

1)
Yah This is partition table and on it Local partition index.
SQL> desc GR_CORE_LOGGING
Name Null? Type
APPLICATIONID VARCHAR2(20)
SERVICEID VARCHAR2(25)
ENTERPRISENAME VARCHAR2(25)
MSISDN VARCHAR2(15)
STATE VARCHAR2(15)
FROMTIME VARCHAR2(25)
TOTIME VARCHAR2(25)
CAMP_ID VARCHAR2(50)
TRANSID VARCHAR2(25)
MSI_INDEX NUMBER
SQL> select index_name,column_name from user_ind_columns where table_name='GR_CORE_LOGGING';
INDEX_NAME
COLUMN_NAME
GR_CORE_LOGGING_IND
MSISDN
2) I was try direct but after that i was drop this table and again create new partition table and create fresh index. but still same issue.

SSIS Moving data very Slow

We have a large table roughly 200 GB that we are attempting to migrate from one server to another. We are attempting to use SSIS and the table has an image type and a text data type. I’ve tried to tune my ssis package by altering the BufferTempStoragePath, BLOBTempStoragePath, DefaultBufferSize, and DefaultBufferMaxRows properties but the transfer still takes extremely long (Up to 15 hours). The table is 15 million rows. I’ve also attempted to run my ssis in chunks as high as 1 million per data flow task and as low as 500000 per data flow task. If I attempt to transfer 250000 records at a time it starts out transferring pretty fast then it slows down drastically once it gets to about 800000 records. I’m using SQL Server 2005 x64 bit on Windows Server 2003 R2 with SP2. I have 16gb of memory on the target server on the and 8 GB on the source. Are there any other changes I should consider?

CozyRoc wrote:
Matt,
Is that behavior with swapping of BLOB/CLOB columns out of to disk documented? I don't remember reading about it.
Yep, it sure is. What Matt M refers to is the fact that a BLOB cannot fit into the data flow buffer. When this happens, the BLOB data gets written to the directory (optionally) specified in the Data Flow parameter, BlobTempStoragePath, or the directory stored in the "TEMP" environment variable.
It is in the description of that property where you will see the confirmation of Matt's statement, "When the data flow task processes a column containing BLOB data that is larger than the available memory on the system it temporarily writes data from the BLOB to the file system."
http://msdn.microsoft.com/en-us/library/microsoft.sqlserver.dts.pipeline.wrapper.mainpipeclass.blobtempstoragepath(SQL.90).aspx
That description is a bit misleading, as I suspect the phrase "...larger than the available memory on the system" also includes being able to fit into the data flow buffer, which ever is smaller.

Yahoo Finance Portfolios - add/remove page and update data very slow to load

The Add/Remove symbols page only partially loads then stops dead. Can take a minute or more to complete loading. And when I try to update quantities or price I get a whirling color gif which only sometimes reaches the point of letting me load data. Firefox, no problem.
Thanks!
Fresnel1
New Jersey

The Add/Remove symbols page only partially loads then stops dead. Can take a minute or more to complete loading. And when I try to update quantities or price I get a whirling color gif which only sometimes reaches the point of letting me load data. Firefox, no problem.
Thanks!
Fresnel1
New Jersey

LKM step Load huge data very slow

Hi ALL,
when you try to load 4 million data from flat file to my oracle database.
it took me around 2.5 hours to finish the step 3 "LOAD DATA" which i thought odi will load data from flat file to C$ table.
it is anyway to speed it up?
I just chose the simple LKM FILE TO SQL option.
thanks
I Z

this is only the step 3 create temp table. it is nothing about the sql load yet.
create table <%=odiRef.getObjectName("T"+odiRef.getTableName("COLL_SHORT_NAME"),"W")%>
<%=odiRef.getSrcColList("","[COL_NAME] [DEST_CRE_DT]","[COL_NAME] [DEST_CRE_DT]",",\n","")%>
<%=odiRef.getUserExit("WORK_TABLE_OPTIONS")%>
this one will auto-generate the sqll like
create table ESBUSER.TC$_0TEST
ROW CODE VARCHAR2(1), --> this one is auto-generated by the above code. i have not way to change ROW CODE TO ROW_CODE.
B VARCHAR2(20),
C VARCHAR2(20),
D VARCHAR2(40)
i dont know why it will generate the ROW CODE......without the "_"...
please help
thanks
I Z

My macbook pro is running very slow after upgrading to version 10.9.1 Here are the results of running EtreCheck:

I am running very slowly after upgrading to ver 10.9.1 on my macbook pro. Can anyone help me to solve this problem. I am including the results from running Etresoft.
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.53 GHz Intel Core i5 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics - VRAM: 288 MB
          NVIDIA GeForce GT 330M - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
          ChmodBPF: Path: /Library/StartupItems/ChmodBPF
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:53:49
Disk Information:
          Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (200.83 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS23N
USB Information:
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Internal Memory Card Reader
          Western Digital My Passport 071A 1 TB
                    EFI (disk1s1) <not mounted>: 209.7 MB
                    Backup (disk1s2) /Volumes/Backup: 999.83 GB (622.71 GB free)
          Apple Computer, Inc. IR Receiver
          Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.kodak.aio.kcpconnector.plist
          [loaded] com.leapfrog.connect.shell.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.sonos.smbbump.plist
Launch Agents:
          [loaded] com.kodak.BonjourAgent.plist
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.kodak.KODAK AiO Firmware Updater.plist
          [loaded] com.kodak.KODAK AiO Software Updater.plist
          [loaded] com.kodak.StatisticCollection.plist
          [loaded] com.spotify.webhelper.plist
          [loaded] uk.co.markallan.clamxav.freshclam.plist
User Login Items:
          Monitor
          ScanSnap Manager
          Evernote
          Dropbox
          AdobeResourceSynchronizer
3rd Party Preference Panes:
          Flash Player
          Growl
Internet Plug-ins::
          Flip4Mac WMV Plugin: Version: 2.3.8.1
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 10.1.8
          AdobePDFViewer: Version: 10.1.8
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
          Silverlight: Version: 4.0.51204.0
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins::
          Google Earth Web Plug-in: Version: 7.1
          Dashlane: Version: Dashlane 1.0.0 - SDK 10.7
Bad Fonts:
          None
Old applications:
          AiOFirmwareUpdater:          Version: 7.7 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/AiOFirmwareUpdater.app
          Install Spotify:          Version: 1.0 - SDK 10.5
                    /Users/jimschindler/Downloads/Install Spotify.app
          KODAK AiO Home Center:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Home Center.app
          KODAK AiO Scan:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Scan.app
          KODAK AiO Software Updater:          Version: 7.7 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Software Updater.app
          KODAK AiO Uninstall:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Uninstall.app
          Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
          Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
          Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
          Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
          Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Document Connection.app
          Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
          Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Excel.app
          Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
          Microsoft Outlook:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Outlook.app
          Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
          Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
          Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
          Microsoft Word:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Word.app
          My Day:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/My Day.app
          Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
          Registration:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/Registration.app
          Solver:          Version: 1.0 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          Spotify:          Version: 0.8.4.124.ga3559d86 - SDK 10.5
                    /Applications/Spotify.app
          SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
Time Machine:
          Skip System Files: NO
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 277.92 GB
          Destinations:
                    Backup [Local] (Last used)
                    Total size: 931.17 GB
                    Total number of backups: 85
                    Oldest backup: 2013-02-13 18:40:47 +0000
                    Last backup: 2013-12-31 17:59:26 +0000
                    Size of backup disk: Adequate
                              Backup size 931.17 GB > (Disk used 277.92 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              29%          Mail
               3%          WindowServer
               2%          mtmd
               1%          EtreCheck
               0%          NETGEARGenieDaemon
Top Processes by Memory:
          410 MB          mds_stores
          238 MB          Evernote
          229 MB          Mail
          147 MB          iBank
          123 MB          WindowServer
Virtual Memory Statistics:
          3.36 GB          Free RAM
          2.92 GB          Active RAM
          621 MB          Inactive RAM
          1.11 GB          Wired RAM
          1.67 GB          Page-ins
          0 B          Page-outs

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Windows 2008 R2 Very Slow to Boot from SAN

I have installed Windows 2008 R2 on a blade in a boot from SAN configuration. I loaded the Cisco Palo FCOE drivers during the install and it went through without a hitch.
After the install the reboots are painfully slow, like 15 minutes. After boot up performance is great and there are no issues. I have tried changing the FC Adpater Policy from Windows to default and even to VMware but it doesn't make a difference.
Anyone know if there is a solution to this slow boot time?
by the way I have an ESX 4 blade running with boot from SAN and it boots normally.
I have checked FC zoneing and Navisphere and can't figure out why it takes so long to boot.

I had to open a case with TAC.. Bug ID CSCtg01880 is the issue.. a summary below. Fix is end of May.
Symptom:
SAN Boot using Palo CNA for Window2008 takes 15~30 minutes everytime it boot.
Conditions:
This is due to incorrect bit set in FC frame.
Workaround:
User need to wait longer for OS to come up. Once OS comes up there will be no service impact.

Send data BPC 5.1 very slow because Antivirus Kaspersky

Dear All....
I have problem with BPC 5.1, the problem when send data to server (send and refresh schedule ). The prosses send data is very slow. I think its because antivirus (Kaspersky), when protection is enable, prosses send data very slow. But when i turn off the protection, prosses send data faster...
The problem is imposible if i turn off protection to every client.
So, what the object, file, application, macro or rule must i exclusion (unscan) with antivirus??
I have already give exclusion to file Ev4DMMPM.xla, but sometime its work, sometime not...
Please help...
Best regards,
Dharma Setiadi

Dear all...
Thanks for attention.....
I have already exclusion folder BPC but still not work. But i think the problem with port. I try turn off scanning with port 80 and its work. I never find slow again...
But the problem, i can't turn off scanning with port 80, its about security. How about if i change port 80 for BPC..?? What is impact with server and with client..?? And whatever that must be noticed in this port changing..?? setting server manager..??
Note : i used multi-server configuration...
Best Regards,
Dharma Setiadi

Playing video on eMac is very slow.

Hi I have an eMac 700mhz with 640mb of SD Ram running Mac OS X 10.3.9 and video is very slow but weirdly videos on YouTube play fine and are not choppy or slow at all.
I have the latest version of flash that will run on this OS : Adobe Flash Player 9.
Any suggestions ?
Thanks

Follow Dale's advice first to run Repair Disk; if there are any disk directory issues, other fixes will just be wasting time until the underlying directory problems are fixed.
Other things to consider: how much free space is there on the hard drive? Unix-based operating systems, which includes OS X, require disk space for scratch and swap files; burning optical discs requires enough space for creation of a temporary file as large as the physical disc being burned; and other programs may have their own cache requirements. If free space on the boot hard drive runs below 1 GB, the computer will begin to behave poorly can can potentially end up unable to boot. Deleting unused data and files (old .dmg images used to install old programs are a prime candidate for deleting) will help. If space is really tight, get an external Firewire hard drive and move user data there:
iTunes: Moving your iTunes Music folder
iPhoto: How to move the iPhoto Library Folder
If you normally shut down an OS X Mac overnight or leave it in system sleep, the cron maintenance tasks cannot run in their nominal 3 am timeframe. (Display-only sleep allows the maintenance tasks to run). Tiger 10.4.2 and later will (nominally) force the maintenance tasks to run after sufficient time has elapsed, although the timing on that is subject to dispute. You can leave the Mac in display-only sleep a weekend or two a month; you can manually Force Background Maintenance; or you can use a third-party utility such as OnyX to run the maintenance. Note that any system utility you use must be compatible with the OS version (e.g., use the Tiger version of OnyX with 10.4.x).

Query Execution is very slow through Froms

Hello Friends
I am facing a problem with D2k Forms. when a run a Query through SQL its execution speed is very fast. the same Query when i run through Forms, like create basetable block and
set_block_property and execute it is very slow. How do i overcome this problem.
what are the various steps to keep in mind when writing code in forms.
thanks in Advance

Hi,
In order to gather schema statistics in EBS, you will have to login as Sysadmin and submit a request named as "Gather Schema Statistics"
Refer below link:
http://appsdba.info/docs/oracle_apps/R12/GatherSchemaStatistics.pdf
Also ensure to schedule the respective request so as to have your statistics up to date, either weekly or monthly as per your system environment.
Please refer note:
How Often Should Gather Schema Statistics Program be Run? [ID 168136.1]
How to Gather Statistics on Custom Schemas for Ebusiness Suite 11i and R12? [ID 1065813.1]
Hope this helps!
Best Regards

Audio problem and macbook pro very slow

Hello,
I have a macbook pro for less than a year.
The latter has begin to be very slow. In addition, I have no sound which are emitted from my Mac, setting apart the opening gong. By the jack, there is no red light that are emitted. I tried to go in the program "audio setup midi" but it does not even want to open. So I tried to open the configuration panel go to select a new audio output device, but to my surprise, after an interminable waiting times, I got a list of blank audio device .. .
I noticed that it started when I put my Mac to version 10.7.4 ... So this is very recent ...
When downloading the update, I was editing a script with automator and my Mac was rammed by an HDMI cable has a television, if it ever can help.
I was wondering how to solve my problem.
thank you
Bonjour,
j'ai un macbook pro depuis moins d'un an.
Ce dernier a commencer a être très lent. De plus, je n'ai plus aucun son qui es émis de mon Mac, mise a part le gong d'ouverture. Par la prise jack, il n'y a pas de lumière rouge qui es émis. J'ai essayé d'aller dans le programme "configuration audio midi" mais celui-ci ne veux même pas ouvrir. J'ai donc essayé d'ouvrir le paneau de configuration pour aller sélectionner un nouveau périphérique de sortie audio, mais a ma grande surprise, après un délais d'attente interminable, j'ai eu droit a une liste de périphérique audio vide...
J'ai remarqué que cela a commencé lors que j'ai mis mon Mac à la version 10.7.4... Donc, c'est tout récent...
Lors du téléchargement de la mise à jours, j'éditais un scripte avec automator et mon Mac était banché par un cable HDMI a une télévision, si jamais ça peux aider.
Je me demandais comment résoudre mes problème.
Merci

The startup drive is failing, or there is some other internal hardware fault.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

My computer is working very slow?

My computer is working very slow? Since Yesterday all the operations and programs are very solw can someone help me?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Otherwise, take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

4G LTE data very slow or nonexistent in San Diego inland North County area?

Similar Messages

Maybe you are looking for