5530XM : No Gate Way Reply..not able to resolve
Hi Friends..
I have just purchased 5530XM but not able to use WLAN. I have tried all the suggestions / advise from the net about No Gate Way reply but I am frustrated.
1. I changed the Power Setting to disabled - did not work
2. I changed phone ip address as static - did not work
Can anybody bring me smile on my face ? I would be thankful to him / her. Please obliged me. I am able to connect WLAN but while going to web browsing got same error "No Gate Way Reply".
Please reply on this.
Thank you in advance.
Have a look at this thread and see if any of the suggestions help.
Similar Messages
-
N95 wlan web no gate way reply
hi. i have a nokia n95 and i get this message web: no gate way reply with most of the wlan connections i connect to. before i upgraded to version 21 of the FW, it was ok but after some wlan hotspots worked and some didnt. At my college where i used it the most it stopped working. i decided to reinstall the firmware but it still didnt work and the ones which did work dont seem to be working either. i read all the other suggestions but nothing helped.(disabling the power saving option) so please help me out. Thanx. Maz.
I've had the same problem.Try doing this:
Menu > Tools > Settings > Connection > Access points.
Try deleting them all except those from your operator.Those from your operator should be marked with an icon two arrows pointing in the opposite direction and the wi-fi access points with circle and four little squares in it.
Bling_Bulgaria.If you find my answers helpful click the Kudos button. Nokia 3300 > 6681;N82,V31.0.016,RM-313 -
Error BEA 380001 ... Not able to resolve Please help
Hi Guys,
I am getting an BEA 380001 error and the message is "Invoke JCA outbound service failed with application error"
Please help me to resolve this... as i am not able to proceed further.
It's urgent.
Regards,
ArchuPLease find the log message...
<May 31, 2010 12:40:14 PM IST> <Error> <JCA_FRAMEWORK_AND_ADAPTER> <BEA-000000>
<servicebus:/WSDL/CustomerService/Provider/UCP-DB/Resources/PERSON [ PERSON_ptt:
:update(PersonCollection) ]
- Could not invoke operation 'update' against the 'D
atabase Adapter' due to:
JCA-11627
Mapping Not Found Exception.
The mapping [Sender] for descriptor [class BusinessService_IdentityManagerServic
eIteration2_V1_Provider_UCP_DB_Services_CallPersonBS_8760382809275770117_6ce764f
6_128ecbb837a__7fa7_BusinessService_IdentityManagerServiceIteration2_V1_Provider
_UCP_DB_Services_CallPersonBS_8760382809275770117_6ce764f6_128ecbb837a__7fa7.PER
SON.Person] could not be found. The input xml record had an element [Person/Send
er].
Make sure that the input xml is valid relative to the xsd and that the mapping e
xists in the Mappings.xml. If an old version of the descriptor without this mapp
ing has been loaded by the database adapter, you may need to bounce the app serv
er. If the same descriptor is described in two separate Mappings.xml files, make
sure both versions include this attribute/mapping. -
Why the bill desk a payment gate way does not open?
I am from India and on personal social visit to US. I am staying with my daughter in broofield Milwaukee. I need to pay my credit card bills. The credit card directs the payment through gateway provided by bill desk/paynet of india. Hoever, after June 12, the payment gateway does not open and hence payments cannot be made. The error message is web site moved or check proxy setting. The proxy setting are default browser setting and payment prior tk June 12 were made. The network used is AT&T through securef WI-FI o the premises. Hope to find solution
please make sure your date and time settings on the device is in sync with the local time. Payment gateways work on a secure protocol (https) which uses system clock for some security reasons.
-
No gate way reply on Nokia N93 with WRTS54GS V.5
Hi guys, hope you can help me with this one.
This has kept me up till 6 am, and I have no idea what to do.
I have a wrt54gs v5 router and I have a Nokia N93. The N93 sees the wifi connection but when it tries to connect it says: No gateway reply.
What could I be doing wrong, here are the settings:
Wrt54gs v5 with firmware 1.50.9, SES enabled using WPA, channel 6, no mac address and in dhcp server set to auto.
UPNP is also enabled.
On the phone it is setup as followed:
Connection name: I Set a name
Data Bearer: Wireless LAN
WLAN netw. name: linksys_SES_14445 (as searched by the phone and automatically set)
Network Status: Hidden
WLAN network.mode: Infrastructure
WLAN security mode: WPA/WPA2
WLAN security sett..:
WPA mode: Pre-shared key
Pre-shared key: key provided by router settings (the wpa share key)
TKIP encryption: Allowed.
In the advanced setings there are IPV4 SETTINGS
with phone ip address dns adress, but these are set to auto.
Any ideas. Your help would be much appreciated.Message Edited by blue13x on 10-22-200609:55 PMI know what's wrong now.
You gateway is invalid on your nokia. your gateway should be 192.168.1.1 -
Not able to resolve ORA-12154 issue
Hi,
have installed a Oracle 11g on a 64-bit Windows 2008R2 server. Installation based on logs was success full, however I do have some issues with getting TNS to work. I am able to TNSPING the server and it returns expected result, but when i try to connect via SQLPLUS (sqlpuls ora/ @srv1) it results in "ORA-12154: TNS:could not resolve the connect identifier specified".
We are in contact with the sid by bypassing TNSNAMES.ORA , but that does not resolve my issue since i need this to work.
I have attempted some suggested changes to tnsnames.ora, sqlnet.ora and listner.ora with out success sofar.
Hope some one has some suggestions on how to overcome this issue
tnsnames.ora
SRV1=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = test1.example.com)(PORT = 1521))
(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_MAME = srv1)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
listner.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oracle\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = test1.example.com)(PORT = 1521))
ADR_BASE_LISTENER = C:\oraclePosting the requested data. If the result from lsnrctl services/status seem a bit strange, please assist me in change settings so that output is english:-)
LISTNER.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_BDNAME=srv1)
(SID_NAME = srv1)
(ORACLE_HOME = C:\oracle\product\11.2.0\dbhome_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = test1.example.com)(PORT = 1521))
ADR_BASE_LISTENER = C:\oracle
TNSNAMES.ORA
srv1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =148.53.60.44)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = srv1)
C:\Users\CJuell>lsnrctl services
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2011 13:22
:44
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Kobler til (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=test1.example.com)(
PORT=1521)))
Tjenesteoversikt...
Tjenesten srv1 har 1 forekomst(er).
Forekomsten srv1, statusen UNKNOWN, har 1 behandler(e) for denne tjenesten.
Behandler(e):
DEDICATED etablert:0 avslÕtt:0
LOCAL SERVER
Tjenesten srv1.ingrnet.com har 1 forekomst(er).
Forekomsten srv1, statusen READY, har 1 behandler(e) for denne tjenesten...
Behandler(e):
DEDICATED etablert:5 avslÕtt:0 tilstand:ready
LOCAL SERVER
Tjenesten srv1XDB.ingrnet.com har 1 forekomst(er).
Forekomsten srv1, statusen READY, har 1 behandler(e) for denne tjenesten...
Behandler(e):
D000 etablert:0 avslÕtt:0 gjeldende:0 maks:1022 tilstand:ready
DISPATCHER <machine: OSL-PPMV-VM31, pid: 2864>
(ADDRESS=(PROTOCOL=tcp)(HOST=test1.example.com)(PORT=61088))
Kommandoen ble utf°rt
C:\Users\CJuell>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2011 13:23
:00
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Kobler til (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=test1.example.com)(
PORT=1521)))
STATUS FOR LYTTERPROSESS
Alias LISTENER
Versjon TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Startdato 29-MAR-2011 11:44:12
Oppetid 0 dager 1 t. 38 min. 48 sek
SporingsnivÕ off
Sikkerhet ON: Local OS Authentication
SNMP OFF
Lytterens parameterfil C:\oracle\product\11.2.0\dbhome_1\network\admin\listen
er.ora
Lytterens loggfil c:\oracle\diag\tnslsnr\osl-ppmv-vm31\listener\alert\lo
g.xml
Sammendrag for lyttende nettverksknutepunkt...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test1.example.com)(PORT=1521
Tjenesteoversikt...
Tjenesten srv1 har 1 forekomst(er).
Forekomsten srv1, statusen UNKNOWN, har 1 behandler(e) for denne tjenesten.
Tjenesten srv1.ingrnet.com har 1 forekomst(er).
Forekomsten srv1, statusen READY, har 1 behandler(e) for denne tjenesten...
Tjenesten srv1XDB.ingrnet.com har 1 forekomst(er).
Forekomsten srv1, statusen READY, har 1 behandler(e) for denne tjenesten...
Kommandoen ble utf°rt
C:\Users\CJuell>lsnrctl services -
Hi, i just downloaded some files from a friend and he sent me a link to download the fonts. I did so and 98% of the fonts work, but there are two fonts i am struggling with.
When i open the file i get the font missing warning and it asks me to resolve the fonts. I cannot find the appropriate font in the drop down list so i click 'don't resolve' and start to edit the file. i then come across some text that has missing fonts and i am able to highlight the text and change the text to the appropriate font using the type tool and the font I am looking for is in the drop down list.
The fonts that aren't working are:
Franchise Bold and BebasNeue
The problem is there are multiple separate incidents where these fonts occur, and going through changing each one manually would take a lot of time.
Is there something i can do to fix them all at once?
Thanks,
HarryI do not see either font in the list you show. I see Bebas Neue xxx but no Bebas Neue without any extra style. Try Bebas Neue at Download Bebas Neue Font - Thousands of fonts to download for free
-
BW not able to resolve "Top N" Condition against Custom Hierarchy in 3.0B
I have a simple query that is attempt to display the "Top 15" Product Families in a customer BW Hierarchy.
When I run the query I get a warning message that says BW cannot execute "Top N" queries against hierarchies, but the query runs successfully anyway (this is good). The query actually sorts all the Product Families in Descending order (based on net sales). This is good too. The only problem is the query does not limit the results to the "Top 15" (even though I am sure the Condition is correct because I have done this many times without hierarchies)
Any thoughts on how to overcome this problem and force the results to be limited to "Top N"?
Thanks!
JimHi Jim,
I don't think that it will work for hierarchies because the condition checks at all hierarchy levels and tries to apply the condition independetly so the overall result doesn't gets applied with the condition.
Hope this helps.
Don't forget to assign points.
Venkat -
Not able to view the content in Microsoft help viewer (MS VS 2012)
Hello Team,
I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
We tried many settings in IE but still not able to resolved. So i need more expert help.
My customer having one issue-
# User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
Thanks,
Rahul B. Patil.
+919972004298.Hi Sri,
it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
Best regards
Xu -
Not able to pass portal login page with valid credentials using WebDispatch
Hi,
We are implementing SAP BillerDirect Portal. To make BillerDirect Portal available over the internet, we Configured SAP WebDispatcher with SSL termination. We followed the steps mentioned in SAP Help Documentaion for SAP WebDispatcher with SSL termination.
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/6d4fa247d0d647b5bd40745400d873/frameset.htm
We created certificate and send it to CA (TrustCenter CA). We received the CA response and we imported the certificate.
AS mentioned in the help document, we configured the SAP Web Dispatcher profile to support SSL termination
We tried to access our BillerDirect Portal over the internet using below link
https://company.com/bd
We are getting login page, once we enter correct user ID and Password, portal is not loading (not going to next page) portal remains on same login page.
If we enter invalid credentials portal login page is giving u201CUser Authentication Failedu201D error.
If we try to access any portal login pages which brings a pop-up for login, login gets succeeded and we are able to see next pages
Examples
1) https://company.com/bd/admin/xcm/init.do
2) https://company.com/monitoring/SystemInfo
All pages which bring up portal login page without pop-up, not able to pass through portal login screen.
We Tried the ProxyMapping option on Dispatcher using Visual admin. This option also didnu2019t work for us.
Here is the WebDispatcher Profile
SAPSYSTEMNAME = xxx
SAPGLOBALHOST = xxxxx
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = hostnameofportalserver with FQDN
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTPS,PORT=443
icm/server_port_1 = PROT=HTTP,PORT=80
icm/HTTPS/verify_client = 0
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=D:\usr\sap\xxx\W00\data\icmanroot\admin,AUTHFILE= D:\usr\sap\xxx\SYS\global\security\data\icmauth.txt
Parameters for the SAP Cryptographic Library
ssl/ssl_lib = D:\usr\sap\xxxW00\sapcrypto.dll
ssl/server_pse = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/name = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/ssfapi_lib = D:\usr\sap\xxx\W00\sapcrypto.dll
sec/libsapsecu = D:\usr\sap\xxx\W00\sapcrypto.dll
wdisp/ssl_cred = D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
Parameters for Using SSL to the backend server
wdisp/ssl_encrypt = 1
wdisp/ssl_auth = 1
wdisp/ssl_cred = D:\usr\sap\xxxW00\sec\SAPSSLC.pse
wdisp/ssl_certhost = hostnameofportalserver with FQDN
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTP/j2ee_0 = PREFIX=/, HOST =hostnameofportalserver with FQDN PORT=50000,SPORT=50001, SSLENC=1,TYPE=1, CRED =D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
We also tried below options in WebDispatcher profile but we are getting same problem.
wdisp/add_client_protocol_header = true
wdisp/add_clientprotocol_header = 1
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = *
icm/HTTPS/trust_client_with_subject = *
we also tried
wdisp/ssl_encrypt = 0
wdisp/ssl_auth = 0
we also tried
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 2
We are not able to resolve issue. Please help us on resolving this issue.
Thanks
Praveen' in Host Names is not allowed. Our hosname has '_'.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm -
Not able to create EAR file for WAR file extracted project
Hi Experts,
I am trying to import a WAR file, make changes to the project and create an EAR file for the same. I am not able to remove import
errors despite of adding required jar files to it.
Also, I am not able to create an EAR file for the same.
I have copied the steps here with screen shots. Below are the steps :
Import WAR file in NWDS 7.3 – Enterprise Portal perspective
Select WAR file to create WAR and EAR project for it.
Project created with import errors. e.g – com.sapportals.portal.prt*
Found jar file from Class – target jar file table.
e.g – for Class com.sapportals.portal.prt.resource.IResource needed jar file is tc~epbc~prt~api.jar
Copied required jar files in WEB-INF -> lib folder.
Configure Build path and Add External jars.
Portalapp file screen shot
I think errors should go now, but they still exist.
Next I right click on WAR project and tried updating related EAR project.
Next, Export EAR file from EAR project.
I have tried both EAR types.
But EAR file is not created.
Please help me in removing the errors.
Thanks in advance :-)
Anubha PandeyHi Anubha,
I feel that you're missing JAR dependencies and hence not able to resolve the above import errors.
Please go through the below thread for the AFP Masthead customization and follow the same:
How to download and change AFP Masthead on SAP Portal 7.3
Hope, this will help!!!
BR,
Anurag -
Not able to use "Fixed recepients" option
hi all,
can anyone help me out,
while configuring alert when i am adding user to alert category i created
i am not able to do it , nothing appears.
previously, when i was creating alert category though the xi_admin role was assigned but still any action during creation of alert catgry wsa asking about request number..though i continued wth that but was stuck up in this.
else hav created msg text, container etc.following mich's blog..
waiting for inputs
thanks
PratibhaHi ,
Sorry for delay ,
I have captured the details as you required :
Please find attache file .
I am working on the same now but still i am not able to resolve the issue so far .
I gone through the document where it is mentioned that ,we can face the same issue if you are not able to resolve the DNS name of the server.
I tried to add the entry in localhost file with server IP address with server name and deleted the existed entry of 127.0.0.1 and afterword I tried but no luck ........
I have attached the all necessary details ..
Please suggest me based on the same .
Thanks,
Vinod -
ADF application deployed but not able to process any events on Tomcat
Hie
Somehow i m able to deploy an ADF application on tomcat 5.5. I am able to see the pages. But nothing is working. That is on click of submit button it does not call the the method written in the bean (assigned to action property of the button).
All is working fine when run withi jdev. Also i dont see any kind of log messages while clicking the submit.
So i m not able to figure out wht is really going wrong. In my apps i have used just ADF faces. There is not ADF-model..
regards
VikHello Praveen,
If I understand correctly the scenario is File -- XI -- RFC and you do not see any message in SXMB_MONI.
I would test the Sender File Adapter first before going to RFC. If the file is picked up and sent to Int Server you would see a corresponding message in SXMB_MONI.
I would first check the Sender File Comm Channel in Comm Channel Monitoring and ensure the file id being picked up.
In case this is not working you would get the exact error in the File Comm Channel. If this channel is working fine and you see a message id for the picked up file but the corresponding message Id is not available in SXMB_MONI, I would have a look at the queues if they are registered properly in SMQR or check if messages are stuck in any queue using SMQ1 and SMQ2 transactions. Please do the following steps and I am sure the scenario would work.
In case you find the problem and are not able to resolve it please post it here and I can suggest something.
Please award points if this post helps you.
Thanks and Best Regards,
Kanwal -
Well im not able to updated all the events I had in the imovie, HELP
Well im not able to updated all the events I had in the imovie, HELP
I have started preparing a small Database application
using JDBC with Swing.
I want to dispaly all the Table names which are
present in the Access Data Source. When i used the
Standard query for this "Select * from Tab" as in
SQL, an eror saying that "not able to resolve symbol
'Tab' ".
Can anybody please help me out to display the table
names?That query
Select * from tabwould work only for Oracle, as far as I know. There is no system table called Tab in Access.
***Annie*** -
As explained , I have also visited the auth. Service station in Bangalore, they were not able to resolve the iTunes access issue.
Unfortunately, only apps, podcasts, iTunes U and Free Books are available from the Indian iTunes Store. See:
iTunes Store: Which types of items can I buy in my country?
Maybe you are looking for
-
and it gets worse.. a computer you can use when the phone is synced to a brand new download of itunes states .... needs your passcode to sync with itunes ???? help iphone states connect to itunes - itunes needs passcode to sync with itunes - iphone
-
Iphone freezing/appearing dead
When pressing the lock button...or once it locks automatically, my iphone screen goes black and responds to NOTHING. The only way to see the screen again is to plug in the charger...but once the phone locks again, the whole process is repeated. This
-
Has anyone else had trouble connecting their YouTube account to the Apple TV?
My YouTube account is connected to my Gmail account. I never set up a second YouTube account with a username, etc. When I try to log in to the AppleTV YouTube app, it says "this type of account cannot be used." I'm not sure what the issue is. Can
-
I want to create new popup block screen in CO11N SCREEN for condition check
in standard CO11N screen after completing filling the required field , when i click the save icon I NEED TO CREATE THE POBUP BLOCK SCREEN FOR CONDITION CHECKING WHICH CONSIST YES NO CANCEL IS THERE ANY FUNC MODULES TO DO THIS? OR IS IT POSSIBLE
-
Additional Tab in Contract Header for SRM 7
Hello, I have a requirement to add custom tabs into the Contract in SRM 7 (latest version) So I added custom fields in the header structure via config, the fields are visible in BBP_PDHSC. Also I did add additional tab into the contract using FPM con