6233 screeb brightness
Just received a new 6233 today and the screen won't light up. Keypad lights up ok, but the screen has no backlight. I can see the screen contents if held into the light, so its there. Is there any way of turning the lights on or wold it be a faulty phone?
Yes, its faulty. What would the point be in just lighting up the keypad? If there was an option to turn it off it would do both.
Owned: Nokia 3510i, Nokia 3120, Nokia 6230i, Nokia 6233, Nokia N73, Nokia N82.
Current: Nokia N900!
Similar Messages
-
6233 Mail For Exchange software ???!!!!!!
i have 6233 in work and i like to get company mail in my 6233 how i can do that?, what i need to install ? and how to configer it to do that
any help will be usefullThis is the 2nd blog posting I've seen that says M4E is / will be available on the N95. It's not on the downloads yet, still 1.6 which does not work on N95.
see here http://darlamack.blogs.com/ also.
I'll not register my roadsync trial just yet in case the M4E rumours are true...
Unfortunately, exchange sync software is the least of my disappointments with the N95. Top of the list has to be the completely inadequate battery life. Yeah, it will last 2 days on standby, but what's the point of having "the phone that does everything" and doing nothing with it??? Mine just about survives a day even with only moderate use & care taken to reduce screen brightness, closing apps not in use etc.
Plus, I'm miffed the internal GPS doesn't work with my fave 3rd party GPS software - TomTom and AFTrack. OK, I know it's up to the 3rd parties to update their apps, but still disappointing, specially with something as main-stream as TomTom -
I have searched the forum for solutions to my problems with this phone. The only solution I found was to return the phone to the store and get an other phone (non Nokia).
The problem is, as a lot of other people seem to have, the fact that the screen lights up now and again, during power saving mode, for no reason what so ever. This has two effects;
1, It is anoying as you get a bright light flicking on and off, seemingly at random.
2, It drains the battery at a fantastic rate causing the phone to not hold on to the claimed standby times before the phone needs a recharge. With luck I need to recharge the phone every second day, and I use it for 10-15 minutes a day.
Has anyone managed to resolve this with Nokia, the people at Orange could not help me with this...I too am experiencing this problem. I had an intermittent problem telling me that the phone was restricted and was advised to get the firmware updated. I did this and am now on version 4.91 but my back-light comes on every 3½ minutes. My girlfriend has exactly the same problem with her 6233 but the timing is slightly different! I have been back to the Nokia Service Centre today, but they tell me that there is not currently a fix available! Somebody please tell me they are wrong.
-
The LED flash on the mobile is so strong that no photos can be taken with flash on.
The light from the flash just makes your photo a plain white picture with nothing on it.
Anyone else facing same problem? I think nokia has really messed up on this.
5110->1100->6100->3230->6233->6681->N72->N73->5800->(With E52 I am done with Nokia)I think, something is wrong with your camera. Get it to service center.
Mine does good photos with the flash light. It is not even that bright as a suny day. So, something prevents your camera to calculate exposure correctly. -
[SOLVED] VAIO brightness no longer working after upgrade
Hi I used to set brightness on my VAIO VPCCAS1E, via...
xfce4 -> fn keys
i3 -> "echo 5 | sudo tee /sys/class/backlight/acpi_video0/brightness"
none of them are working after having upgraded the system yesterday. I have checked the news and done my -Syu accordingly.
Upgrade log:
[2013-06-05 09:49] [PACMAN] Running 'pacman -Syu'
[2013-06-05 09:49] [PACMAN] synchronizing package lists
[2013-06-05 09:50] [PACMAN] starting full system upgrade
[2013-06-05 10:29] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.VTY/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
[2013-06-05 10:31] [PACMAN] Running 'pacman -U /tmp/yaourt-tmp-szebenyib/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
[2013-06-05 10:31] [ALPM-SCRIPTLET]
[2013-06-05 10:31] [ALPM-SCRIPTLET] Restarting cups
[2013-06-05 10:31] [ALPM-SCRIPTLET]
[2013-06-05 10:31] [ALPM-SCRIPTLET]
[2013-06-05 10:31] [ALPM-SCRIPTLET] -----------------------------------------------------------
[2013-06-05 10:31] [ALPM-SCRIPTLET] - -
[2013-06-05 10:31] [ALPM-SCRIPTLET] -Remember to check for foomatic-db-foo2zjs updates as well-
[2013-06-05 10:31] [ALPM-SCRIPTLET] - -
[2013-06-05 10:31] [ALPM-SCRIPTLET] -----------------------------------------------------------
[2013-06-05 10:31] [ALPM-SCRIPTLET]
[2013-06-05 10:31] [PACMAN] upgraded foo2zjs (20130302-3 -> 20130530-3)
[2013-06-05 10:34] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.JSV/plymouth-0.8.8-10-x86_64.pkg.tar.xz'
[2013-06-05 10:34] [ALPM-SCRIPTLET]
[2013-06-05 10:34] [ALPM-SCRIPTLET] ==================================================================================
[2013-06-05 10:34] [ALPM-SCRIPTLET] 1. To make Plymouth work:
[2013-06-05 10:34] [ALPM-SCRIPTLET] 1.1. Add "plymouth" to HOOKS after "base" and "udev" in /etc/mkinitcpio.conf
[2013-06-05 10:34] [ALPM-SCRIPTLET] 1.2. Add 'quiet splash' to the grub command line
[2013-06-05 10:34] [ALPM-SCRIPTLET] 1.3. Rebuild your initrd image (# mkinitcpio -p [kernel preset name]).
[2013-06-05 10:34] [ALPM-SCRIPTLET] E.g.: sudo mkinitcpio -p linux
[2013-06-05 10:34] [ALPM-SCRIPTLET]
[2013-06-05 10:34] [ALPM-SCRIPTLET] 2. To enable encryption, replace "encrypt" with "plymouth-encrypt" in
[2013-06-05 10:34] [ALPM-SCRIPTLET] mkinitcpio.conf and rebuild your initrd image.
[2013-06-05 10:34] [ALPM-SCRIPTLET]
[2013-06-05 10:34] [ALPM-SCRIPTLET] 3. You will also need to rebuild your initrd image every time you change your theme
[2013-06-05 10:34] [ALPM-SCRIPTLET] (the default is set as 'spinfinity').
[2013-06-05 10:34] [ALPM-SCRIPTLET]
[2013-06-05 10:34] [ALPM-SCRIPTLET] To list all plymouth themes:
[2013-06-05 10:34] [ALPM-SCRIPTLET] plymouth-set-default-theme -l
[2013-06-05 10:34] [ALPM-SCRIPTLET]
[2013-06-05 10:34] [ALPM-SCRIPTLET] To change theme:
[2013-06-05 10:34] [ALPM-SCRIPTLET] # plymouth-set-default-theme <theme>
[2013-06-05 10:34] [ALPM-SCRIPTLET]
[2013-06-05 10:34] [ALPM-SCRIPTLET] To rebuild initrd image:
[2013-06-05 10:34] [ALPM-SCRIPTLET] # mkinitcpio -p linux
[2013-06-05 10:34] [ALPM-SCRIPTLET]
[2013-06-05 10:34] [ALPM-SCRIPTLET] 4. For Smooth Transition to Display Manager you have to:
[2013-06-05 10:34] [ALPM-SCRIPTLET] 4.1. See the Wiki Page (link in 5) to prepare your Display Manager
[2013-06-05 10:34] [ALPM-SCRIPTLET] 4.2. Disable your Display Manager Unit
[2013-06-05 10:34] [ALPM-SCRIPTLET] E.g. : systemctl disable kdm.service
[2013-06-05 10:34] [ALPM-SCRIPTLET] 4.3. Enable the respective DM-plymouth Unit (GDM,KDM,Lightdm,LXDM units provided)
[2013-06-05 10:34] [ALPM-SCRIPTLET] E.g. : systemctl enable kdm-plymouth.service
[2013-06-05 10:34] [ALPM-SCRIPTLET]
[2013-06-05 10:34] [ALPM-SCRIPTLET] 5. For more information please visit the Wiki page:
[2013-06-05 10:34] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Plymouth
[2013-06-05 10:34] [ALPM-SCRIPTLET]
[2013-06-05 10:34] [ALPM-SCRIPTLET] OBS. If you have any leftover "kill Plymouth" lines in /etc/rc.local or ~/.xinitrc
[2013-06-05 10:34] [ALPM-SCRIPTLET] they are no longer required.
[2013-06-05 10:34] [ALPM-SCRIPTLET] ==================================================================================
[2013-06-05 10:34] [ALPM-SCRIPTLET]
[2013-06-05 10:34] [PACMAN] upgraded plymouth (0.8.8-5 -> 0.8.8-10)
[2013-06-05 10:36] [PACMAN] Running 'pacman -U tmp/plymouth.tar.gz'
[2013-06-05 10:36] [PACMAN] Running 'pacman -U plymouth.tar.gz'
[2013-06-05 10:37] [PACMAN] Running 'pacman -S catalyst-utils'
[2013-06-05 10:40] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.eGs/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
[2013-06-05 10:40] [PACMAN] Running 'pacman -S catalyst-dkms lib32-catalyst-utils'
[2013-06-05 10:41] [PACMAN] Running 'pacman -S catalyst'
[2013-06-05 10:44] [PACMAN] Running 'pacman --color auto -Sy'
[2013-06-05 10:44] [PACMAN] synchronizing package lists
[2013-06-05 10:47] [PACMAN] Running 'pacman -S catalyst catalyst-utils'
[2013-06-05 10:47] [PACMAN] Running 'pacman -Syu'
[2013-06-05 10:47] [PACMAN] synchronizing package lists
[2013-06-05 10:52] [PACMAN] Running 'pacman --color auto -Sy'
[2013-06-05 10:52] [PACMAN] synchronizing package lists
[2013-06-05 10:53] [PACMAN] Running 'pacman -Syu'
[2013-06-05 10:53] [PACMAN] synchronizing package lists
[2013-06-05 10:53] [PACMAN] Running 'pacman --color auto -Sy'
[2013-06-05 10:53] [PACMAN] synchronizing package lists
[2013-06-05 10:55] [PACMAN] Running 'pacman --color auto -Sy'
[2013-06-05 10:55] [PACMAN] synchronizing package lists
[2013-06-05 10:58] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.9k2/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
[2013-06-05 11:02] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.FaM/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
[2013-06-05 11:03] [PACMAN] Running 'pacman --color auto -S --asdeps --needed multilib/lib32-libdrm'
[2013-06-05 11:03] [PACMAN] installed lib32-libpciaccess (0.13.1-1)
[2013-06-05 11:03] [PACMAN] installed lib32-libdrm (2.4.45-1)
[2013-06-05 11:09] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.lze/catalyst-total-13.4-3-x86_64.pkg.tar.xz'
[2013-06-05 11:12] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.QOe/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
[2013-06-05 11:14] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.MWT/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
[2013-06-05 11:19] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.MKV/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
[2013-06-05 11:20] [PACMAN] Running 'pacman -U /tmp/yaourt-tmp-szebenyib/catalyst-utils-13.4-2-x86_64.pkg.tar.xz /tmp/yaourt-tmp-szebenyib/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
[2013-06-05 11:29] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.3qD/lib32-catalyst-utils-13.4-1-x86_64.pkg.tar.xz'
[2013-06-05 11:31] [PACMAN] Running 'pacman -U /tmp/yaourt-tmp-szebenyib/lib32-catalyst-utils-13.4-1-x86_64.pkg.tar.xz'
[2013-06-05 11:33] [PACMAN] Running 'pacman -U --force /tmp/yaourt-tmp-szebenyib/lib32-catalyst-utils-13.4-1-x86_64.pkg.tar.xz'
[2013-06-05 11:33] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-06-05 11:33] [ALPM-SCRIPTLET] lib32-catalyst-utils works with [multilib] repository
[2013-06-05 11:33] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-06-05 11:33] [PACMAN] upgraded lib32-catalyst-utils (13.1-2 -> 13.4-1)
[2013-06-05 11:33] [PACMAN] Running 'pacman -U tmp/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz tmp/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
[2013-06-05 11:34] [PACMAN] Running 'pacman -U --force tmp/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz tmp/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
[2013-06-05 11:34] [ALPM-SCRIPTLET] [37;44m[1m---------------- I/O BUG ---------------------------------------[0m
[2013-06-05 11:34] [ALPM-SCRIPTLET] There's a bug in fglrx found by lano1106 which generates
[2013-06-05 11:34] [ALPM-SCRIPTLET] great amount of unneeded I/O operations
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] To activate workaround enable systemd service:
[2013-06-05 11:34] [ALPM-SCRIPTLET] systemctl enable temp-links-catalyst
[2013-06-05 11:34] [ALPM-SCRIPTLET] systemctl start temp-links-catalyst
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] More infos:
[2013-06-05 11:34] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1279977#p1279977
[2013-06-05 11:34] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1280193#p1280193
[2013-06-05 11:34] [ALPM-SCRIPTLET] [37;44m[1m----------------------------------------------------------------[0m
[2013-06-05 11:34] [PACMAN] upgraded catalyst-utils (13.1-5 -> 13.4-2)
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] -------- Uninstall Beginning --------
[2013-06-05 11:34] [ALPM-SCRIPTLET] Module: fglrx
[2013-06-05 11:34] [ALPM-SCRIPTLET] Version: 13.1-2
[2013-06-05 11:34] [ALPM-SCRIPTLET] Kernel: 3.8.4-1-ARCH (x86_64)
[2013-06-05 11:34] [ALPM-SCRIPTLET] -------------------------------------
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] Status: Before uninstall, this module version was ACTIVE on this kernel.
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] fglrx.ko:
[2013-06-05 11:34] [ALPM-SCRIPTLET] - Uninstallation
[2013-06-05 11:34] [ALPM-SCRIPTLET] - Deleting from: /usr/lib/modules/3.8.4-1-ARCH/extramodules/
[2013-06-05 11:34] [ALPM-SCRIPTLET] - Original module
[2013-06-05 11:34] [ALPM-SCRIPTLET] - No original module was found for this module on this kernel.
[2013-06-05 11:34] [ALPM-SCRIPTLET] - Use the dkms install command to reinstall any previous module version.
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] depmod.......
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: uninstall completed.
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] ------------------------------
[2013-06-05 11:34] [ALPM-SCRIPTLET] Deleting module version: 13.1-2
[2013-06-05 11:34] [ALPM-SCRIPTLET] completely from the DKMS tree.
[2013-06-05 11:34] [ALPM-SCRIPTLET] ------------------------------
[2013-06-05 11:34] [ALPM-SCRIPTLET] Done.
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] Creating symlink /var/lib/dkms/fglrx/13.4-1/source ->
[2013-06-05 11:34] [ALPM-SCRIPTLET] /usr/src/fglrx-13.4-1
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: add completed.
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] Kernel preparation unnecessary for this kernel. Skipping...
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] Building module:
[2013-06-05 11:34] [ALPM-SCRIPTLET] cleaning build area....
[2013-06-05 11:34] [ALPM-SCRIPTLET] sh make.sh --nohints --uname_r=3.8.4-1-ARCH --norootcheck........
[2013-06-05 11:34] [ALPM-SCRIPTLET] cleaning build area....
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: build completed.
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] fglrx.ko:
[2013-06-05 11:34] [ALPM-SCRIPTLET] Running module version sanity check.
[2013-06-05 11:34] [ALPM-SCRIPTLET] - Original module
[2013-06-05 11:34] [ALPM-SCRIPTLET] - No original module exists within this kernel
[2013-06-05 11:34] [ALPM-SCRIPTLET] - Installation
[2013-06-05 11:34] [ALPM-SCRIPTLET] - Installing to /usr/lib/modules/3.8.4-1-ARCH/extramodules/
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] depmod....
[2013-06-05 11:34] [ALPM-SCRIPTLET]
[2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: install completed.
[2013-06-05 11:34] [PACMAN] upgraded catalyst-dkms (13.1-2 -> 13.4-1)
[2013-06-05 11:36] [PACMAN] Running 'pacman -R fondu'
[2013-06-05 11:36] [PACMAN] removed fondu (060102-3)
[2013-06-05 11:50] [PACMAN] Running 'pacman --color auto -U --force /tmp/yaourt-tmp-szebenyib/PKGDEST.nWC/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
[2013-06-05 11:50] [ALPM-SCRIPTLET]
[2013-06-05 11:50] [ALPM-SCRIPTLET] Restarting cups
[2013-06-05 11:50] [ALPM-SCRIPTLET]
[2013-06-05 11:50] [ALPM-SCRIPTLET]
[2013-06-05 11:50] [ALPM-SCRIPTLET] -----------------------------------------------------------
[2013-06-05 11:50] [ALPM-SCRIPTLET] - -
[2013-06-05 11:50] [ALPM-SCRIPTLET] -Remember to check for foomatic-db-foo2zjs updates as well-
[2013-06-05 11:50] [ALPM-SCRIPTLET] - -
[2013-06-05 11:50] [ALPM-SCRIPTLET] -----------------------------------------------------------
[2013-06-05 11:50] [ALPM-SCRIPTLET]
[2013-06-05 11:50] [PACMAN] reinstalled foo2zjs (20130530-3)
[2013-06-05 11:50] [PACMAN] Running 'pacman -R foomatic-db-foo2zjs'
[2013-06-05 11:51] [PACMAN] Running 'pacman -R foomatic-db-foo2zjs foo2zjs'
[2013-06-05 11:51] [ALPM-SCRIPTLET]
[2013-06-05 11:51] [ALPM-SCRIPTLET] Restarting cups
[2013-06-05 11:51] [ALPM-SCRIPTLET]
[2013-06-05 11:51] [ALPM-SCRIPTLET]
[2013-06-05 11:51] [ALPM-SCRIPTLET] -----------------------------------------------------------
[2013-06-05 11:51] [ALPM-SCRIPTLET] - -
[2013-06-05 11:51] [ALPM-SCRIPTLET] - Remember to replace foomatic-db-foo2zjs with -
[2013-06-05 11:51] [ALPM-SCRIPTLET] - foomatic-db from [extra]. -
[2013-06-05 11:51] [ALPM-SCRIPTLET] - -
[2013-06-05 11:51] [ALPM-SCRIPTLET] -----------------------------------------------------------
[2013-06-05 11:51] [ALPM-SCRIPTLET]
[2013-06-05 11:51] [PACMAN] removed foo2zjs (20130530-3)
[2013-06-05 11:51] [PACMAN] removed foomatic-db-foo2zjs (4.0.17_20120712-2)
[2013-06-05 11:51] [PACMAN] Running 'pacman --color auto -S --asdeps --needed --noconfirm extra/enscript'
[2013-06-05 11:51] [PACMAN] installed enscript (1.6.5.2-2)
[2013-06-05 12:05] [PACMAN] Running 'pacman --color auto -U --asdeps --noconfirm /tmp/yaourt-tmp-szebenyib/PKGDEST.yFz/foomatic-db-foo2zjs-1:4.0.17_20130518-1-x86_64.pkg.tar.xz'
[2013-06-05 12:05] [PACMAN] installed foomatic-db-foo2zjs (1:4.0.17_20130518-1)
[2013-06-05 12:13] [PACMAN] Running 'pacman --color auto -U --noconfirm /tmp/yaourt-tmp-szebenyib/PKGDEST.N1v/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
[2013-06-05 12:13] [ALPM-SCRIPTLET]
[2013-06-05 12:13] [ALPM-SCRIPTLET] Restarting cups
[2013-06-05 12:13] [ALPM-SCRIPTLET]
[2013-06-05 12:13] [ALPM-SCRIPTLET]
[2013-06-05 12:13] [ALPM-SCRIPTLET] -----------------------------------------------------------
[2013-06-05 12:13] [ALPM-SCRIPTLET] - -
[2013-06-05 12:13] [ALPM-SCRIPTLET] - You need to add your user to the lp group. -
[2013-06-05 12:13] [ALPM-SCRIPTLET] - -
[2013-06-05 12:13] [ALPM-SCRIPTLET] - -
[2013-06-05 12:13] [ALPM-SCRIPTLET] - Please refer to the table at http://foo2zjs.rkkda.com/ -
[2013-06-05 12:13] [ALPM-SCRIPTLET] - -
[2013-06-05 12:13] [ALPM-SCRIPTLET] - to choose the appropriate driver for your printer. -
[2013-06-05 12:13] [ALPM-SCRIPTLET] - -
[2013-06-05 12:13] [ALPM-SCRIPTLET] -----------------------------------------------------------
[2013-06-05 12:13] [ALPM-SCRIPTLET]
[2013-06-05 12:13] [PACMAN] installed foo2zjs (20130530-3)
[2013-06-05 12:30] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.omZ/plymouth-0.8.8-10-x86_64.pkg.tar.xz'
[2013-06-05 12:30] [ALPM-SCRIPTLET]
[2013-06-05 12:30] [ALPM-SCRIPTLET] ==================================================================================
[2013-06-05 12:30] [ALPM-SCRIPTLET] 1. To make Plymouth work:
[2013-06-05 12:30] [ALPM-SCRIPTLET] 1.1. Add "plymouth" to HOOKS after "base" and "udev" in /etc/mkinitcpio.conf
[2013-06-05 12:30] [ALPM-SCRIPTLET] 1.2. Add 'quiet splash' to the grub command line
[2013-06-05 12:30] [ALPM-SCRIPTLET] 1.3. Rebuild your initrd image (# mkinitcpio -p [kernel preset name]).
[2013-06-05 12:30] [ALPM-SCRIPTLET] E.g.: sudo mkinitcpio -p linux
[2013-06-05 12:30] [ALPM-SCRIPTLET]
[2013-06-05 12:30] [ALPM-SCRIPTLET] 2. To enable encryption, replace "encrypt" with "plymouth-encrypt" in
[2013-06-05 12:30] [ALPM-SCRIPTLET] mkinitcpio.conf and rebuild your initrd image.
[2013-06-05 12:30] [ALPM-SCRIPTLET]
[2013-06-05 12:30] [ALPM-SCRIPTLET] 3. You will also need to rebuild your initrd image every time you change your theme
[2013-06-05 12:30] [ALPM-SCRIPTLET] (the default is set as 'spinfinity').
[2013-06-05 12:30] [ALPM-SCRIPTLET]
[2013-06-05 12:30] [ALPM-SCRIPTLET] To list all plymouth themes:
[2013-06-05 12:30] [ALPM-SCRIPTLET] plymouth-set-default-theme -l
[2013-06-05 12:30] [ALPM-SCRIPTLET]
[2013-06-05 12:30] [ALPM-SCRIPTLET] To change theme:
[2013-06-05 12:30] [ALPM-SCRIPTLET] # plymouth-set-default-theme <theme>
[2013-06-05 12:30] [ALPM-SCRIPTLET]
[2013-06-05 12:30] [ALPM-SCRIPTLET] To rebuild initrd image:
[2013-06-05 12:30] [ALPM-SCRIPTLET] # mkinitcpio -p linux
[2013-06-05 12:30] [ALPM-SCRIPTLET]
[2013-06-05 12:30] [ALPM-SCRIPTLET] 4. For Smooth Transition to Display Manager you have to:
[2013-06-05 12:30] [ALPM-SCRIPTLET] 4.1. See the Wiki Page (link in 5) to prepare your Display Manager
[2013-06-05 12:30] [ALPM-SCRIPTLET] 4.2. Disable your Display Manager Unit
[2013-06-05 12:30] [ALPM-SCRIPTLET] E.g. : systemctl disable kdm.service
[2013-06-05 12:30] [ALPM-SCRIPTLET] 4.3. Enable the respective DM-plymouth Unit (GDM,KDM,Lightdm,LXDM units provided)
[2013-06-05 12:30] [ALPM-SCRIPTLET] E.g. : systemctl enable kdm-plymouth.service
[2013-06-05 12:30] [ALPM-SCRIPTLET]
[2013-06-05 12:30] [ALPM-SCRIPTLET] 5. For more information please visit the Wiki page:
[2013-06-05 12:30] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Plymouth
[2013-06-05 12:30] [ALPM-SCRIPTLET]
[2013-06-05 12:30] [ALPM-SCRIPTLET] OBS. If you have any leftover "kill Plymouth" lines in /etc/rc.local or ~/.xinitrc
[2013-06-05 12:30] [ALPM-SCRIPTLET] they are no longer required.
[2013-06-05 12:30] [ALPM-SCRIPTLET] ==================================================================================
[2013-06-05 12:30] [ALPM-SCRIPTLET]
[2013-06-05 12:30] [PACMAN] reinstalled plymouth (0.8.8-10)
[2013-06-05 12:30] [PACMAN] Running 'pacman --color auto -S --asdeps --needed community/audit'
[2013-06-05 12:30] [PACMAN] installed audit (2.2.3-2)
[2013-06-05 12:32] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.8WE/e4rat-0.2.3-2-x86_64.pkg.tar.xz'
[2013-06-05 12:32] [PACMAN] upgraded e4rat (0.2.3-1 -> 0.2.3-2)
[2013-06-05 12:39] [PACMAN] Running 'pacman -R plymouth'
[2013-06-05 12:39] [PACMAN] removed plymouth (0.8.8-10)
[2013-06-05 12:41] [PACMAN] Running 'pacman -Syu --ignore filesystem,bash'
[2013-06-05 12:41] [PACMAN] synchronizing package lists
[2013-06-05 12:41] [PACMAN] starting full system upgrade
[2013-06-05 13:04] [PACMAN] upgraded linux-api-headers (3.7.4-1 -> 3.8.4-1)
[2013-06-05 13:04] [PACMAN] upgraded tzdata (2013b-1 -> 2013c-1)
[2013-06-05 13:04] [ALPM-SCRIPTLET] Generating locales...
[2013-06-05 13:04] [ALPM-SCRIPTLET] en_US.UTF-8... done
[2013-06-05 13:04] [ALPM-SCRIPTLET] hu_HU.UTF-8... done
[2013-06-05 13:04] [ALPM-SCRIPTLET] Generation complete.
[2013-06-05 13:04] [PACMAN] upgraded glibc (2.17-3 -> 2.17-6)
[2013-06-05 13:04] [PACMAN] upgraded lib32-glibc (2.17-2 -> 2.17-5)
[2013-06-05 13:04] [PACMAN] upgraded lib32-gcc-libs (4.7.2-4 -> 4.8.1-1)
[2013-06-05 13:04] [PACMAN] upgraded gcc-libs-multilib (4.7.2-4 -> 4.8.1-1)
[2013-06-05 13:04] [PACMAN] upgraded pcre (8.32-1 -> 8.33-1)
[2013-06-05 13:04] [PACMAN] upgraded glib2 (2.34.3-1 -> 2.36.2-1)
[2013-06-05 13:04] [PACMAN] upgraded zlib (1.2.7-1 -> 1.2.8-1)
[2013-06-05 13:04] [PACMAN] upgraded cracklib (2.8.22-1 -> 2.8.22-3)
[2013-06-05 13:04] [PACMAN] upgraded libtirpc (0.2.2-4 -> 0.2.3-1)
[2013-06-05 13:04] [PACMAN] upgraded pam (1.1.6-1 -> 1.1.6-4)
[2013-06-05 13:04] [PACMAN] upgraded expat (2.1.0-1 -> 2.1.0-2)
[2013-06-05 13:04] [PACMAN] upgraded gmp (5.1.1-1 -> 5.1.2-1)
[2013-06-05 13:04] [PACMAN] upgraded libcap (2.22-3 -> 2.22-5)
[2013-06-05 13:04] [PACMAN] upgraded coreutils (8.21-1 -> 8.21-2)
[2013-06-05 13:04] [PACMAN] upgraded dbus (1.6.8-6 -> 1.6.10-1)
[2013-06-05 13:04] [PACMAN] upgraded kbd (1.15.5-3 -> 1.15.5-4)
[2013-06-05 13:04] [PACMAN] upgraded kmod (12-1 -> 13-2)
[2013-06-05 13:04] [PACMAN] upgraded hwids (20130228-1 -> 20130512-1)
[2013-06-05 13:04] [PACMAN] upgraded libgcrypt (1.5.1-1 -> 1.5.2-1)
[2013-06-05 13:04] [PACMAN] upgraded shadow (4.1.5.1-5 -> 4.1.5.1-6)
[2013-06-05 13:04] [PACMAN] upgraded util-linux (2.22.2-2 -> 2.23.1-2)
[2013-06-05 13:04] [ALPM-SCRIPTLET] ==> The /bin/systemd symlink has been removed. Any references in your
[2013-06-05 13:04] [ALPM-SCRIPTLET] bootloader (or elsewhere) must be updated to /usr/lib/systemd/systemd.
[2013-06-05 13:04] [PACMAN] upgraded systemd (198-2 -> 204-3)
[2013-06-05 13:04] [PACMAN] upgraded nspr (4.9.5-1 -> 4.9.6-1)
[2013-06-05 13:04] [PACMAN] installed js185 (1.0.0-2)
[2013-06-05 13:04] [PACMAN] upgraded polkit (0.110-1 -> 0.110-2)
[2013-06-05 13:04] [PACMAN] upgraded accountsservice (0.6.30-1 -> 0.6.32-1)
[2013-06-05 13:04] [PACMAN] upgraded acpid (2.0.18-2 -> 2.0.19-1)
[2013-06-05 13:04] [PACMAN] upgraded alsa-lib (1.0.26-1 -> 1.0.27.1-1)
[2013-06-05 13:04] [PACMAN] upgraded alsa-plugins (1.0.26-1 -> 1.0.27-1)
[2013-06-05 13:04] [PACMAN] upgraded dialog (1.2_20121230-1 -> 1.2_20130523-1)
[2013-06-05 13:04] [PACMAN] upgraded pciutils (3.1.10-1 -> 3.2.0-3)
[2013-06-05 13:04] [PACMAN] upgraded psmisc (22.19-1 -> 22.20-1)
[2013-06-05 13:04] [PACMAN] upgraded alsa-utils (1.0.26-1 -> 1.0.27.1-2)
[2013-06-05 13:04] [PACMAN] upgraded libsasl (2.1.26-2 -> 2.1.26-4)
[2013-06-05 13:04] [PACMAN] upgraded e2fsprogs (1.42.7-1 -> 1.42.7-2)
[2013-06-05 13:04] [PACMAN] upgraded libldap (2.4.34-1 -> 2.4.35-4)
[2013-06-05 13:04] [PACMAN] upgraded apr-util (1.5.1-1 -> 1.5.2-1)
[2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Kulcsok hozzáfűzése a(z) archlinux.gpg fájlból...
[2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
[2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 6 trust: 0-, 0q, 0n, 0m, 0f, 1u
[2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 6 signed: 64 trust: 1-, 0q, 0n, 5m, 0f, 0u
[2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 63 signed: 3 trust: 63-, 0q, 0n, 0m, 0f, 0u
[2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: A bizalmi adatbázis következő ellenőrzése: 2014-01-22.
[2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Megbízható kulcsok aláírása helyileg a kulcstartóban...
[2013-06-05 13:04] [ALPM-SCRIPTLET] -> 0E8B644079F599DFC1DDC3973348882F6AC6A4C2 kulcs aláírása helyileg...
[2013-06-05 13:04] [ALPM-SCRIPTLET] -> 684148BB25B49E986A4944C55184252D824B18E8 kulcs aláírása helyileg...
[2013-06-05 13:04] [ALPM-SCRIPTLET] -> 44D4A033AC140143927397D47EFD567D4C7EA887 kulcs aláírása helyileg...
[2013-06-05 13:04] [ALPM-SCRIPTLET] -> 27FFC4769E19F096D41D9265A04F9397CDFD6BB0 kulcs aláírása helyileg...
[2013-06-05 13:04] [ALPM-SCRIPTLET] -> AB19265E5D7D20687D303246BA1DFB64FFF979E7 kulcs aláírása helyileg...
[2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Megbízhatósági értékek importálása...
[2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Visszavont kulcsok tiltása a kulcstartóban...
[2013-06-05 13:04] [ALPM-SCRIPTLET] -> 1390420191 kulcs tiltása...
[2013-06-05 13:04] [ALPM-SCRIPTLET] -> E2539214C6C11350 kulcs tiltása...
[2013-06-05 13:04] [ALPM-SCRIPTLET] -> 8544EA82113502DE kulcs tiltása...
[2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Megbízhatósági adatbázis frissítése...
[2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: A bizalmi adatbázis következő ellenőrzése: 2014-01-22.
[2013-06-05 13:04] [PACMAN] upgraded archlinux-keyring (20130224-1 -> 20130525-1)
[2013-06-05 13:04] [PACMAN] upgraded libxau (1.0.7-1 -> 1.0.8-1)
[2013-06-05 13:04] [PACMAN] upgraded libxcb (1.9-3 -> 1.9.1-1)
[2013-06-05 13:05] [PACMAN] upgraded libx11 (1.5.0-2 -> 1.6.0-1)
[2013-06-05 13:05] [PACMAN] upgraded libxext (1.3.1-1 -> 1.3.2-1)
[2013-06-05 13:05] [PACMAN] upgraded libxi (1.7-1 -> 1.7.1-1)
[2013-06-05 13:05] [PACMAN] upgraded libxfixes (5.0-2 -> 5.0.1-1)
[2013-06-05 13:05] [PACMAN] upgraded libxtst (1.2.1-1 -> 1.2.2-1)
[2013-06-05 13:05] [PACMAN] upgraded at-spi2-core (2.6.3-1 -> 2.8.0-1)
[2013-06-05 13:05] [PACMAN] upgraded atk (2.6.0-1 -> 2.8.0-1)
[2013-06-05 13:05] [PACMAN] upgraded at-spi2-atk (2.6.2-1 -> 2.8.1-1)
[2013-06-05 13:05] [PACMAN] upgraded libsigc++ (2.2.11-1 -> 2.3.1-1)
[2013-06-05 13:05] [PACMAN] upgraded glibmm (2.34.1-1 -> 2.36.2-1)
[2013-06-05 13:05] [PACMAN] upgraded atkmm (2.22.6-1 -> 2.22.7-1)
[2013-06-05 13:05] [PACMAN] upgraded perl (5.16.3-1 -> 5.18.0-1)
[2013-06-05 13:05] [PACMAN] upgraded automake (1.13.1-1 -> 1.13.2-1)
[2013-06-05 13:05] [PACMAN] upgraded avahi (0.6.31-6 -> 0.6.31-9)
[2013-06-05 13:05] [PACMAN] upgraded libpng (1.5.14-1 -> 1.6.2-3)
[2013-06-05 13:05] [ALPM-SCRIPTLET] updating font cache... done.
[2013-06-05 13:05] [PACMAN] upgraded fontconfig (2.10.2-1 -> 2.10.93-1)
[2013-06-05 13:05] [PACMAN] upgraded pixman (0.28.2-1 -> 0.30.0-1)
[2013-06-05 13:05] [PACMAN] upgraded libdrm (2.4.43-1 -> 2.4.45-1)
[2013-06-05 13:05] [PACMAN] upgraded wayland (1.0.6-1 -> 1.1.0-1)
[2013-06-05 13:05] [PACMAN] upgraded libxxf86vm (1.1.2-1 -> 1.1.3-1)
[2013-06-05 13:05] [PACMAN] installed llvm-amdgpu-lib-snapshot (20130403-3)
[2013-06-05 13:05] [PACMAN] upgraded mesa (9.1.1-1 -> 9.1.3-1)
[2013-06-05 13:05] [PACMAN] upgraded cairo (1.12.14-3 -> 1.12.14-4)
[2013-06-05 13:05] [PACMAN] upgraded libjpeg-turbo (1.2.1-1 -> 1.3.0-2)
[2013-06-05 13:05] [PACMAN] upgraded libtiff (4.0.3-1 -> 4.0.3-2)
[2013-06-05 13:05] [ALPM-SCRIPTLET] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-06-05 13:05] [PACMAN] upgraded gdk-pixbuf2 (2.26.5-2 -> 2.28.1-2)
[2013-06-05 13:05] [PACMAN] upgraded giflib (4.1.6-5 -> 4.2.1-2)
[2013-06-05 13:05] [PACMAN] upgraded imlib2 (1.4.5-2 -> 1.4.5-4)
[2013-06-05 13:05] [PACMAN] upgraded libxcursor (1.1.13-1 -> 1.1.14-1)
[2013-06-05 13:05] [PACMAN] upgraded lua (5.2.1-3 -> 5.2.2-1)
[2013-06-05 13:05] [PACMAN] upgraded icu (51.1-1 -> 51.2-1)
[2013-06-05 13:05] [PACMAN] upgraded graphite (1:1.2.1-1 -> 1:1.2.2-1)
[2013-06-05 13:05] [PACMAN] upgraded harfbuzz (0.9.14-1 -> 0.9.17-2)
[2013-06-05 13:05] [ALPM-SCRIPTLET] /tmp/alpm_DTKAFN/.INSTALL: sor: 5: sbin/ldconfig: Nincs ilyen fájl vagy könyvtár
[2013-06-05 13:05] [PACMAN] upgraded pango (1.32.5-1 -> 1.34.1-1)
[2013-06-05 13:05] [PACMAN] upgraded awesome (3.5-2 -> 3.5.1-1)
[2013-06-05 13:05] [PACMAN] upgraded bash-completion (2.0-3 -> 2.1-2)
[2013-06-05 13:05] [PACMAN] upgraded binutils-multilib (2.23.1-3 -> 2.23.2-2)
[2013-06-05 13:05] [PACMAN] upgraded m4 (1.4.16-2 -> 1.4.16-3)
[2013-06-05 13:05] [PACMAN] upgraded bison (2.7-1 -> 2.7.1-1)
[2013-06-05 13:05] [PACMAN] upgraded sqlite (3.7.16.1-1 -> 3.7.17-1)
[2013-06-05 13:05] [PACMAN] upgraded python2 (2.7.3-4 -> 2.7.5-1)
[2013-06-05 13:05] [PACMAN] upgraded bluez (4.101-1 -> 4.101-2)
[2013-06-05 13:05] [PACMAN] upgraded gtk-update-icon-cache (2.24.17-1 -> 2.24.18-1)
[2013-06-05 13:05] [PACMAN] upgraded librsvg (2.36.4-1 -> 2.37.0-2)
[2013-06-05 13:06] [PACMAN] upgraded gnome-icon-theme-symbolic (3.6.2-1 -> 3.8.2.2-1)
[2013-06-05 13:06] [PACMAN] upgraded gnome-icon-theme (3.6.2-1 -> 3.8.2-1)
[2013-06-05 13:06] [PACMAN] upgraded libpulse (3.0-2 -> 3.0-3)
[2013-06-05 13:06] [PACMAN] upgraded libusbx (1.0.14-1 -> 1.0.15-1)
[2013-06-05 13:06] [PACMAN] upgraded openobex (1.5-3 -> 1.7-5)
[2013-06-05 13:06] [PACMAN] upgraded libltdl (2.4.2-7 -> 2.4.2-9)
[2013-06-05 13:06] [PACMAN] upgraded libxt (1.1.3-1 -> 1.1.4-1)
[2013-06-05 13:06] [PACMAN] upgraded liblqr (0.4.1-3 -> 0.4.2-1)
[2013-06-05 13:06] [PACMAN] upgraded imagemagick (6.8.4.0-1 -> 6.8.5.7-1)
[2013-06-05 13:06] [PACMAN] upgraded obex-data-server (0.4.6-5 -> 0.4.6-7)
[2013-06-05 13:06] [PACMAN] upgraded blueman (1.23-5 -> 1.23-6)
[2013-06-05 13:06] [PACMAN] upgraded boost-libs (1.52.0-3 -> 1.53.0-2)
[2013-06-05 13:06] [PACMAN] upgraded boost (1.52.0-3 -> 1.53.0-2)
[2013-06-05 13:06] [PACMAN] upgraded sed (4.2.2-2 -> 4.2.2-3)
[2013-06-05 13:06] [PACMAN] upgraded ca-certificates (20130119-1 -> 20130119-2)
[2013-06-05 13:06] [PACMAN] upgraded ca-certificates-java (20121112+nmu2-1 -> 20121112+nmu2-2)
[2013-06-05 13:06] [PACMAN] upgraded cairo-perl (1.082-2 -> 1.103-2)
[2013-06-05 13:06] [PACMAN] upgraded cairomm (1.10.0-2 -> 1.10.0-3)
[2013-06-05 13:06] [PACMAN] upgraded libxml2 (2.8.0-1 -> 2.9.1-2)
[2013-06-05 13:06] [PACMAN] upgraded libbluray (0.2.3-1 -> 0.3.0-1)
[2013-06-05 13:06] [PACMAN] upgraded libva (1.1.0-2 -> 1.1.1-1)
[2013-06-05 13:06] [PACMAN] upgraded libvpx (1.1.0-1 -> 1.2.0-1)
[2013-06-05 13:06] [PACMAN] upgraded openjpeg (1.5.0-1 -> 1.5.1-1)
[2013-06-05 13:06] [PACMAN] upgraded opus (1.0.2-1 -> 1.0.2-2)
[2013-06-05 13:06] [PACMAN] upgraded rtmpdump (20121203-1 -> 20121203-2)
[2013-06-05 13:06] [PACMAN] upgraded v4l-utils (0.9.3-2 -> 0.9.5-2)
[2013-06-05 13:06] [PACMAN] upgraded ffmpeg (1:1.2-1 -> 1:1.2.1-1)
[2013-06-05 13:06] [PACMAN] upgraded chromaprint (0.7-4 -> 0.7-5)
[2013-06-05 13:06] [PACMAN] upgraded keyutils (1.5.5-3 -> 1.5.5-5)
[2013-06-05 13:06] [PACMAN] upgraded krb5 (1.11.1-1 -> 1.11.2-4)
[2013-06-05 13:06] [PACMAN] installed libbsd (0.4.2-1)
[2013-06-05 13:06] [PACMAN] upgraded libwbclient (3.6.13-1 -> 4.0.6-1)
[2013-06-05 13:06] [PACMAN] upgraded cifs-utils (5.9-1 -> 6.0-2)
[2013-06-05 13:06] [PACMAN] upgraded cogl (1.10.4-1 -> 1.14.0-3)
[2013-06-05 13:06] [PACMAN] upgraded json-glib (0.15.2-1 -> 0.16.0-1)
[2013-06-05 13:06] [PACMAN] upgraded xkeyboard-config (2.8-1 -> 2.9-1)
[2013-06-05 13:06] [PACMAN] upgraded libxkbcommon (0.2.0-3 -> 0.3.0-1)
[2013-06-05 13:06] [PACMAN] upgraded clutter (1.12.2-1 -> 1.14.4-2)
[2013-06-05 13:06] [PACMAN] upgraded libtasn1 (3.2-1 -> 3.3-1)
[2013-06-05 13:06] [PACMAN] upgraded nettle (2.6-1 -> 2.7.1-1)
[2013-06-05 13:06] [PACMAN] upgraded p11-kit (0.13-1 -> 0.18.2-1)
[2013-06-05 13:06] [PACMAN] upgraded gnutls (3.1.10-1 -> 3.2.1-1)
[2013-06-05 13:06] [PACMAN] upgraded libcups (1.6.2-1 -> 1.6.2-2)
[2013-06-05 13:06] [PACMAN] upgraded libxinerama (1.1.2-1 -> 1.1.3-1)
[2013-06-05 13:06] [PACMAN] upgraded libxrandr (1.4.0-1 -> 1.4.1-1)
[2013-06-05 13:06] [PACMAN] upgraded libgusb (0.1.4-1 -> 0.1.6-1)
[2013-06-05 13:06] [PACMAN] upgraded dconf (0.14.1-1 -> 0.16.0-1)
[2013-06-05 13:06] [ALPM] warning: /etc/colord.conf installed as /etc/colord.conf.pacnew
[2013-06-05 13:06] [PACMAN] upgraded colord (0.1.31-1 -> 1.0.0-1)
[2013-06-05 13:06] [PACMAN] upgraded gtk3 (3.6.4-2 -> 3.8.2-1)
[2013-06-05 13:06] [PACMAN] upgraded clutter-gtk (1.4.2-1 -> 1.4.4-1)
[2013-06-05 13:06] [PACMAN] upgraded curl (7.29.0-2 -> 7.30.0-1)
[2013-06-05 13:06] [PACMAN] upgraded cmake (2.8.10.2-5 -> 2.8.11-2)
[2013-06-05 13:06] [PACMAN] upgraded cpupower (3.8-1 -> 3.9-3)
[2013-06-05 13:06] [PACMAN] upgraded cronie (1.4.9-2 -> 1.4.9-4)
[2013-06-05 13:06] [PACMAN] upgraded device-mapper (2.02.98-3 -> 2.02.98-4)
[2013-06-05 13:06] [PACMAN] upgraded popt (1.16-5 -> 1.16-6)
[2013-06-05 13:06] [PACMAN] upgraded cryptsetup (1.6.0-1 -> 1.6.1-2)
[2013-06-05 13:06] [PACMAN] upgraded poppler (0.22.2-1 -> 0.22.4-1)
[2013-06-05 13:06] [PACMAN] upgraded qpdf (4.0.1-1 -> 4.1.0-1)
[2013-06-05 13:06] [PACMAN] upgraded cups-filters (1.0.31-1 -> 1.0.34-4)
[2013-06-05 13:07] [PACMAN] upgraded cups (1.6.2-1 -> 1.6.2-2)
[2013-06-05 13:07] [PACMAN] upgraded dash (0.5.7-3 -> 0.5.7-4)
[2013-06-05 13:07] [PACMAN] upgraded iptables (1.4.18-1 -> 1.4.19.1-1)
[2013-06-05 13:07] [PACMAN] upgraded iproute2 (3.8.0-1 -> 3.9.0-2)
[2013-06-05 13:07] [PACMAN] upgraded dhclient (4.2.5-1 -> 4.2.5.p1-2)
[2013-06-05 13:07] [PACMAN] upgraded dhcpcd (5.6.7-1 -> 5.6.8-3)
[2013-06-05 13:07] [PACMAN] upgraded libksba (1.2.0-3 -> 1.3.0-1)
[2013-06-05 13:07] [PACMAN] upgraded dirmngr (1.1.0-4 -> 1.1.1-1)
[2013-06-05 13:07] [PACMAN] upgraded gcc-multilib (4.7.2-4 -> 4.8.1-1)
[2013-06-05 13:07] [PACMAN] upgraded dkms (2.2.0.3-13 -> 2.2.0.3-14)
[2013-06-05 13:07] [PACMAN] upgraded libxslt (1.1.26-3 -> 1.1.28-1)
[2013-06-05 13:07] [PACMAN] upgraded docbook-xsl (1.78.0-1 -> 1.78.1-1)
[2013-06-05 13:07] [PACMAN] upgraded gtk2 (2.24.17-1 -> 2.24.18-1)
[2013-06-05 13:07] [PACMAN] upgraded dropbox (1.6.16-1 -> 2.0.16-1)
[2013-06-05 13:07] [ALPM-SCRIPTLET] /tmp/alpm_NMeaOd/.INSTALL: sor: 9: sbin/ldconfig: Nincs ilyen fájl vagy könyvtár
[2013-06-05 13:07] [PACMAN] upgraded fakeroot (1.18.4-1 -> 1.19-1)
[2013-06-05 13:07] [PACMAN] upgraded file-roller (3.6.3-2 -> 3.8.2-1)
[2013-06-05 13:07] [PACMAN] upgraded wxgtk (2.8.12.1-4 -> 2.8.12.1-5)
[2013-06-05 13:07] [PACMAN] upgraded filezilla (3.6.0.2-1 -> 3.7.0.2-1)
[2013-06-05 13:07] [PACMAN] upgraded nss (3.14.3-2 -> 3.14.3-3)
[2013-06-05 13:07] [PACMAN] upgraded firefox (19.0.2-1 -> 21.0-1)
[2013-06-05 13:07] [PACMAN] upgraded libogg (1.3.0-1 -> 1.3.1-1)
[2013-06-05 13:07] [PACMAN] upgraded flac (1.2.1-3 -> 1.3.0-1)
[2013-06-05 13:07] [PACMAN] upgraded flashplugin (11.2.202.275-1 -> 11.2.202.285-1)
[2013-06-05 13:07] [PACMAN] upgraded foomatic-filters (1:4.0.17_20120712-1 -> 1:4.0.17_20130518-1)
[2013-06-05 13:07] [PACMAN] upgraded foomatic-db-engine (1:4.0.17_20120712-1 -> 1:4.0.17_20130518-1)
[2013-06-05 13:07] [PACMAN] upgraded freeglut (2.8.0-2 -> 2.8.1-1)
[2013-06-05 13:07] [PACMAN] upgraded fuse (2.9.2-1 -> 2.9.2-3)
[2013-06-05 13:07] [PACMAN] upgraded libxfce4util (4.10.0-1 -> 4.10.1-2)
[2013-06-05 13:07] [PACMAN] upgraded garcon (0.2.0-1 -> 0.2.1-1)
[2013-06-05 13:07] [PACMAN] upgraded gawk (4.0.2-1 -> 4.1.0-1)
[2013-06-05 13:07] [PACMAN] upgraded gconf (3.2.6-1 -> 3.2.6-2)
[2013-06-05 13:07] [PACMAN] upgraded gcr (3.6.2-2 -> 3.8.2-1)
[2013-06-05 13:07] [PACMAN] upgraded gd (2.0.36RC1-5 -> 2.0.36RC1-6)
[2013-06-05 13:07] [PACMAN] upgraded geany (1.23-1 -> 1.23.1-1)
[2013-06-05 13:07] [PACMAN] upgraded geoip-database (20130206-1 -> 20130514-1)
[2013-06-05 13:07] [PACMAN] upgraded geoip (1.4.8-2 -> 1.5.0-1)
[2013-06-05 13:07] [PACMAN] upgraded ghostscript (9.07-1 -> 9.07-2)
[2013-06-05 13:07] [PACMAN] upgraded perl-error (0.17019-1 -> 0.17020-1)
[2013-06-05 13:07] [PACMAN] upgraded git (1.8.2-1 -> 1.8.3-1)
[2013-06-05 13:07] [PACMAN] upgraded libproxy (0.4.11-1 -> 0.4.11-2)
[2013-06-05 13:07] [PACMAN] upgraded gsettings-desktop-schemas (3.6.1-1 -> 3.8.2-1)
[2013-06-05 13:07] [PACMAN] upgraded glib-networking (2.34.2-1 -> 2.36.2-1)
[2013-06-05 13:07] [PACMAN] upgraded glib-perl (1.260-1 -> 1.280-3)
[2013-06-05 13:07] [PACMAN] upgraded gmtk (1.0.7-1 -> 1.0.8-1)
[2013-06-05 13:07] [PACMAN] upgraded libatasmart (0.19-1 -> 0.19-2)
[2013-06-05 13:07] [PACMAN] upgraded udisks2 (2.0.1-1 -> 2.1.0-3)
[2013-06-05 13:07] [PACMAN] upgraded libsecret (0.14-1 -> 0.15-1)
[2013-06-05 13:08] [PACMAN] upgraded gnome-disk-utility (3.6.1-1 -> 3.8.2-1)
[2013-06-05 13:08] [PACMAN] upgraded lirc-utils (1:0.9.0-39 -> 1:0.9.0-46)
[2013-06-05 13:08] [PACMAN] installed tevent (0.9.18-1)
[2013-06-05 13:08] [PACMAN] installed ldb (1.1.15-1)
[2013-06-05 13:08] [PACMAN] upgraded smbclient (3.6.13-1 -> 4.0.6-1)
[2013-06-05 13:08] [PACMAN] upgraded libxxf86dga (1.1.3-1 -> 1.1.4-1)
[2013-06-05 13:08] [PACMAN] upgraded mpg123 (1.15.1-1 -> 1.15.4-1)
[2013-06-05 13:08] [PACMAN] upgraded libcdio-paranoia (10.2+0.90-1 -> 10.2+0.90+1-1)
[2013-06-05 13:08] [PACMAN] upgraded mplayer (35920-1 -> 36285-1)
[2013-06-05 13:08] [PACMAN] upgraded gnome-mplayer (1.0.7-2 -> 1.0.8-1)
[2013-06-05 13:08] [PACMAN] upgraded pango-perl (1.223-2 -> 1.224-2)
[2013-06-05 13:08] [PACMAN] upgraded gtk2-perl (1.244-1 -> 1.247-2)
[2013-06-05 13:08] [PACMAN] upgraded gnome-vfs-perl (1.081-6 -> 1.081-7)
[2013-06-05 13:08] [PACMAN] upgraded gnomecanvas-perl (1.002-10 -> 1.002-11)
[2013-06-05 13:08] [PACMAN] upgraded pinentry (0.8.2-2 -> 0.8.3-1)
[2013-06-05 13:08] [PACMAN] upgraded gnupg (2.0.19-6 -> 2.0.20-2)
[2013-06-05 13:08] [PACMAN] upgraded python2-mako (0.7.3-1 -> 0.8.1-1)
[2013-06-05 13:08] [PACMAN] upgraded gobject-introspection (1.34.2-1 -> 1.36.0-1)
[2013-06-05 13:08] [PACMAN] upgraded parted (3.1-1 -> 3.1-2)
[2013-06-05 13:08] [PACMAN] upgraded pangomm (2.28.4-1 -> 2.34.0-1)
[2013-06-05 13:08] [PACMAN] upgraded gtkmm (2.24.2-2 -> 2.24.3-1)
[2013-06-05 13:08] [PACMAN] upgraded gparted (0.15.0-1 -> 0.16.1-5)
[2013-06-05 13:08] [PACMAN] upgraded gpgme (1.3.2-1 -> 1.4.1-1)
[2013-06-05 13:08] [PACMAN] upgraded gpm (1.20.7-1 -> 1.20.7-3)
[2013-06-05 13:08] [PACMAN] upgraded groff (1.22.2-2 -> 1.22.2-3)
[2013-06-05 13:08] [PACMAN] upgraded gstreamer0.10 (0.10.36-1 -> 0.10.36-2)
[2013-06-05 13:08] [PACMAN] upgraded gstreamer0.10-good (0.10.31-1 -> 0.10.31-3)
[2013-06-05 13:08] [ALPM-SCRIPTLET] /tmp/alpm_i2PHDJ/.INSTALL: sor: 18: usr/sbin/gconfpkg: Nincs ilyen fájl vagy könyvtár
[2013-06-05 13:08] [ALPM-SCRIPTLET] /tmp/alpm_EvtktN/.INSTALL: sor: 4: usr/sbin/gconfpkg: Nincs ilyen fájl vagy könyvtár
[2013-06-05 13:08] [PACMAN] upgraded gstreamer0.10-good-plugins (0.10.31-1 -> 0.10.31-3)
[2013-06-05 13:08] [PACMAN] installed gstreamer (1.0.7-1)
[2013-06-05 13:08] [PACMAN] upgraded orc (0.4.16-1 -> 0.4.17-1)
[2013-06-05 13:08] [PACMAN] upgraded libxv (1.0.7-1 -> 1.0.8-1)
[2013-06-05 13:08] [PACMAN] installed gst-plugins-base-libs (1.0.7-1)
[2013-06-05 13:08] [PACMAN] upgraded libwebp (0.2.1-1 -> 0.3.0-3)
[2013-06-05 13:08] [PACMAN] installed geoclue (0.12.99-1)
[2013-06-05 13:08] [PACMAN] installed webkitgtk3 (2.0.2-1)
[2013-06-05 13:08] [PACMAN] upgraded gthumb (3.1.2-1 -> 3.2.2-1)
[2013-06-05 13:08] [PACMAN] upgraded gtkmm3 (3.6.0-1 -> 3.8.1-1)
[2013-06-05 13:08] [PACMAN] upgraded gvfs (1.14.2-4 -> 1.16.2-1)
[2013-06-05 13:08] [PACMAN] upgraded gvfs-smb (1.14.2-4 -> 1.16.2-1)
[2013-06-05 13:08] [PACMAN] upgraded vim-runtime (7.3.875-1 -> 7.3.918-2)
[2013-06-05 13:08] [PACMAN] upgraded ruby (2.0.0_p0-1 -> 2.0.0_p195-1)
[2013-06-05 13:08] [PACMAN] upgraded gvim (7.3.875-1 -> 7.3.918-2)
[2013-06-05 13:08] [PACMAN] upgraded hddtemp (0.3.beta15.52-1 -> 0.3.beta15.52-2)
[2013-06-05 13:08] [PACMAN] upgraded hdparm (9.43-1 -> 9.43-2)
[2013-06-05 13:08] [PACMAN] upgraded pygobject-devel (3.4.2-1 -> 3.8.2-1)
[2013-06-05 13:08] [PACMAN] upgraded python2-gobject (3.4.2-1 -> 3.8.2-1)
[2013-06-05 13:08] [PACMAN] upgraded ibus (1.5.1-1 -> 1.5.2-1)
[2013-06-05 13:08] [PACMAN] upgraded jre7-openjdk-headless (7.u17_2.3.8-1 -> 7.u21_2.3.9-4)
[2013-06-05 13:08] [PACMAN] upgraded jre7-openjdk (7.u17_2.3.8-1 -> 7.u21_2.3.9-4)
[2013-06-05 13:08] [PACMAN] upgraded icedtea-web-java7 (1.3.1-2 -> 1.4-1)
[2013-06-05 13:08] [PACMAN] upgraded ilmbase (1.0.3-1 -> 2.0.0-1)
[2013-06-05 13:08] [PACMAN] upgraded inetutils (1.9.1-4 -> 1.9.1-6)
[2013-06-05 13:08] [PACMAN] upgraded python (3.3.0-3 -> 3.3.2-1)
[2013-06-05 13:08] [PACMAN] upgraded iotop (0.5-1 -> 0.5-2)
[2013-06-05 13:08] [PACMAN] upgraded iputils (20121221-1 -> 20121221-2)
[2013-06-05 13:08] [PACMAN] upgraded isl (0.11.1-1 -> 0.11.2-1)
[2013-06-05 13:08] [PACMAN] upgraded jbig2dec (0.11-5 -> 0.11-6)
[2013-06-05 13:08] [PACMAN] upgraded jdk7-openjdk (7.u17_2.3.8-1 -> 7.u21_2.3.9-4)
[2013-06-05 13:08] [PACMAN] upgraded jfsutils (1.1.15-3 -> 1.1.15-4)
[2013-06-05 13:08] [PACMAN] upgraded js (1.8.5-3 -> 17.0.0-1)
[2013-06-05 13:08] [PACMAN] upgraded strigi (0.7.8-2 -> 0.7.8-3)
[2013-06-05 13:09] [PACMAN] upgraded qt4 (4.8.4-16 -> 4.8.4-18)
[2013-06-05 13:09] [PACMAN] upgraded virtuoso-base (6.1.6-1 -> 6.1.6-2)
[2013-06-05 13:09] [PACMAN] upgraded soprano (2.9.0-2 -> 2.9.2-1)
[2013-06-05 13:09] [PACMAN] upgraded openexr (1.7.1-2 -> 2.0.0-1)
[2013-06-05 13:09] [PACMAN] upgraded procps-ng (3.3.7-1 -> 3.3.8-1)
[2013-06-05 13:09] [PACMAN] upgraded pm-utils (1.4.1-5 -> 1.4.1-6)
[2013-06-05 13:09] [PACMAN] upgraded libplist (1.8-2 -> 1.10-1)
[2013-06-05 13:09] [PACMAN] upgraded usbmuxd (1.0.8-1 -> 1.0.8-2)
[2013-06-05 13:09] [PACMAN] upgraded libimobiledevice (1.1.4-2 -> 1.1.5-1)
[2013-06-05 13:09] [PACMAN] upgraded upower (0.9.20-1 -> 0.9.20-2)
[2013-06-05 13:09] [PACMAN] upgraded qtwebkit (2.3.0-1 -> 2.3.1-2)
[2013-06-05 13:09] [PACMAN] upgraded kdelibs (4.10.1-2 -> 4.10.3-3)
[2013-06-05 13:09] [ALPM-SCRIPTLET] gtk-update-icon-cache: Cache file created successfully.
[2013-06-05 13:09] [PACMAN] upgraded klavaro (1.9.6-1 -> 1.9.7-1)
[2013-06-05 13:09] [PACMAN] upgraded laptop-mode-tools (1.63-1 -> 1.63-2)
[2013-06-05 13:09] [PACMAN] upgraded less (451-1 -> 458-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-alsa-lib (1.0.26-1 -> 1.0.27.1-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-dbus-core (1.6.8-1 -> 1.6.10-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-fontconfig (2.10.2-1 -> 2.10.93-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-zlib (1.2.7-1 -> 1.2.8-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-glib2 (2.34.3-1 -> 2.36.2-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-glu (9.0.0-1 -> 9.0.0-2)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libjpeg-turbo (1.2.1-1 -> 1.3.0-2)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libpng (1.5.14-1 -> 1.6.2-1)
[2013-06-05 13:09] [PACMAN] installed lib32-xz (5.0.4-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libtiff (4.0.3-1 -> 4.0.3-2)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libxau (1.0.7-1 -> 1.0.8-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libxcb (1.9-2 -> 1.9.1-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libxfixes (5.0-1 -> 5.0.1-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libxcursor (1.1.13-1 -> 1.1.14-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libxext (1.3.1-1 -> 1.3.2-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libxi (1.7-1 -> 1.7.1-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libxrandr (1.4.0-1 -> 1.4.1-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-libxv (1.0.7-1 -> 1.0.8-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-sqlite (3.7.16-1 -> 3.7.17-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-qt4 (4.8.4-4 -> 4.8.4-5)
[2013-06-05 13:09] [PACMAN] upgraded lib32-util-linux (2.22.2-1 -> 2.23.1-1)
[2013-06-05 13:09] [PACMAN] upgraded lib32-v4l-utils (0.9.3-1 -> 0.9.5-1)
[2013-06-05 13:09] [PACMAN] upgraded libbonobo (2.32.1-3 -> 2.32.1-4)
[2013-06-05 13:09] [PACMAN] upgraded libburn (1.2.8-1 -> 1.3.0.pl01-1)
[2013-06-05 13:09] [PACMAN] upgraded libdmx (1.1.2-1 -> 1.1.3-1)
[2013-06-05 13:09] [PACMAN] upgraded libdvbpsi (0.2.2-1 -> 1:0.2.2-1)
[2013-06-05 13:09] [PACMAN] upgraded libfontenc (1.1.1-1 -> 1.1.2-1)
[2013-06-05 13:09] [PACMAN] upgraded libgnome-keyring (3.6.0-2 -> 3.8.0-1)
[2013-06-05 13:09] [PACMAN] upgraded libgpod (0.8.2-6 -> 0.8.2-7)
[2013-06-05 13:09] [PACMAN] upgraded libgxps (0.2.2-2 -> 0.2.2-3)
[2013-06-05 13:09] [PACMAN] upgraded libical (0.48-1 -> 1.0-2)
[2013-06-05 13:09] [PACMAN] upgraded libisofs (1.2.8-1 -> 1.3.0-1)
[2013-06-05 13:09] [PACMAN] upgraded libkate (0.4.1-3 -> 0.4.1-4)
[2013-06-05 13:09] [PACMAN] upgraded liblastfm (1.0.6-2 -> 1.0.7-1)
[2013-06-05 13:09] [PACMAN] upgraded libmicrohttpd (0.9.25-1 -> 0.9.27-1)
[2013-06-05 13:09] [PACMAN] upgraded libnfs (1.3.0-1 -> 1.5.0-1)
[2013-06-05 13:09] [PACMAN] upgraded libpcap (1.3.0-3 -> 1.4.0-1)
[2013-06-05 13:09] [PACMAN] upgraded libpipeline (1.2.2-1 -> 1.2.3-1)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-hu (4.0.1-1 -> 4.0.3-1)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-common (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-base (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-calc (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-draw (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-gnome (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-impress (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-kde4 (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-math (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:09] [PACMAN] upgraded postgresql-libs (9.2.3-1 -> 9.2.4-2)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-postgresql-connector (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:09] [PACMAN] upgraded libreoffice-sdk (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:10] [PACMAN] upgraded libreoffice-sdk-doc (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:10] [PACMAN] upgraded libwpd (0.9.4-1 -> 0.9.6-1)
[2013-06-05 13:10] [PACMAN] upgraded libwps (0.2.7-1 -> 0.2.9-1)
[2013-06-05 13:10] [PACMAN] upgraded libreoffice-writer (4.0.1-5 -> 4.0.3-3)
[2013-06-05 13:10] [PACMAN] upgraded libshairport (1.2.1-2 -> 1.2.1.20121215-1)
[2013-06-05 13:10] [PACMAN] upgraded tar (1.26-2 -> 1.26-4)
[2013-06-05 13:10] [PACMAN] upgraded libtool (2.4.2-7 -> 2.4.2-9)
[2013-06-05 13:10] [PACMAN] upgraded libtorrent-rasterbar (1:0.16.9-1 -> 1:0.16.10-1)
[2013-06-05 13:10] [PACMAN] upgraded libxres (1.0.6-1 -> 1.0.7-1)
[2013-06-05 13:10] [PACMAN] upgraded linux-firmware (20121118-1 -> 20130528-1)
[2013-06-05 13:10] [PACMAN] upgraded mkinitcpio (0.13.0-1 -> 0.14.0-1)
[2013-06-05 13:10] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-06-05 13:10] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.4-1-ARCH
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [v86d]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth' cannot be found
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth-encrypt' cannot be found
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: file not found: `/usr/sbin/dmsetup'
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: errors were encountered during the build. The image may not be complete.
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.4-1-ARCH
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [v86d]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth' cannot be found
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth-encrypt' cannot be found
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: file not found: `/usr/sbin/dmsetup'
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: errors were encountered during the build. The image may not be complete.
[2013-06-05 13:10] [PACMAN] upgraded linux (3.8.4-1 -> 3.9.4-1)
[2013-06-05 13:10] [PACMAN] upgraded linux-headers (3.8.4-1 -> 3.9.4-1)
[2013-06-05 13:10] [PACMAN] upgraded linux-lts-headers (3.0.71-1 -> 3.0.80-1)
[2013-06-05 13:10] [PACMAN] upgraded lm_sensors (3.3.3-1 -> 3.3.4-1)
[2013-06-05 13:10] [PACMAN] upgraded logrotate (3.8.3-1 -> 3.8.4-2)
[2013-06-05 13:10] [PACMAN] upgraded lsof (4.87-1 -> 4.87-2)
[2013-06-05 13:10] [PACMAN] upgraded lvm2 (2.02.98-3 -> 2.02.98-4)
[2013-06-05 13:10] [PACMAN] upgraded man-db (2.6.3-1 -> 2.6.3-3)
[2013-06-05 13:11] [PACMAN] upgraded man-pages (3.50-1 -> 3.51-1)
[2013-06-05 13:11] [PACMAN] upgraded mdadm (3.2.6-3 -> 3.2.6-4)
[2013-06-05 13:11] [PACMAN] upgraded meld (1.7.1-1 -> 1.7.3-1)
[2013-06-05 13:11] [PACMAN] upgraded mercurial (2.5.2-1 -> 2.6.2-1)
[2013-06-05 13:11] [PACMAN] upgraded zenity (3.6.0-1 -> 3.8.0-1)
[2013-06-05 13:11] [PACMAN] upgraded metacity (2.34.13-1 -> 2.34.13-5)
[2013-06-05 13:11] [PACMAN] upgraded mjpegtools (2.0.0-2 -> 2.0.0-3)
[2013-06-05 13:11] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2013-06-05 13:11] [PACMAN] upgraded pacman-mirrorlist (20130323-1 -> 20130601-1)
[2013-06-05 13:11] [PACMAN] upgraded pacman (4.1.0-2 -> 4.1.1-1)
[2013-06-05 13:11] [PACMAN] upgraded pyalpm (0.5.3-2 -> 0.6.1-1)
[2013-06-05 13:11] [PACMAN] upgraded namcap (3.2.4-2 -> 3.2.5-1)
[2013-06-05 13:11] [PACMAN] upgraded net-tools (1.60.20120804git-2 -> 1.60.20130531git-1)
[2013-06-05 13:11] [PACMAN] upgraded xinetd (2.3.15-2 -> 2.3.15-3)
[2013-06-05 13:11] [PACMAN] upgraded netkit-bsd-finger (0.17-7 -> 0.17-8)
[2013-06-05 13:11] [PACMAN] upgraded wpa_supplicant (2.0-3 -> 2.0-4)
[2013-06-05 13:11] [PACMAN] upgraded ppp (2.4.5-5 -> 2.4.5-6)
[2013-06-05 13:11] [PACMAN] installed libqmi (1.2.0-2)
[2013-06-05 13:11] [PACMAN] installed libmbim (1.0.0-1)
[2013-06-05 13:11] [PACMAN] installed modemmanager (0.7.990-5)
[2013-06-05 13:11] [PACMAN] upgraded networkmanager (0.9.8.0-2 -> 0.9.8.0-4)
[2013-06-05 13:11] [PACMAN] upgraded network-manager-applet (0.9.8.0-1 -> 0.9.8.0-3)
[2013-06-05 13:11] [PACMAN] upgraded python2-distribute (0.6.34-1 -> 0.6.40-1)
[2013-06-05 13:11] [PACMAN] upgraded sip (4.14.5-1 -> 4.14.6-1)
[2013-06-05 13:11] [PACMAN] upgraded python2-sip (4.14.5-1 -> 4.14.6-1)
[2013-06-05 13:11] [PACMAN] upgraded pyqt-common (4.10-1 -> 4.10.1-1)
[2013-06-05 13:11] [PACMAN] upgraded python2-pyqt (4.10-1 -> 4.10.1-1)
[2013-06-05 13:11] [PACMAN] upgraded ninja-ide (2.1.1-1 -> 2.2-1)
[2013-06-05 13:11] [PACMAN] upgraded ntfs-3g (2013.1.13-2 -> 2013.1.13-3)
[2013-06-05 13:11] [PACMAN] upgraded ntp (4.2.6.p5-13 -> 4.2.6.p5-14)
[2013-06-05 13:11] [ALPM-SCRIPTLET]
[2013-06-05 13:11] [ALPM-SCRIPTLET] ==> The sshd daemon has been moved to /usr/bin alongside all binaries.
[2013-06-05 13:11] [ALPM-SCRIPTLET] ==> Please update this path in your scripts if applicable.
[2013-06-05 13:11] [ALPM-SCRIPTLET]
[2013-06-05 13:11] [PACMAN] upgraded openssh (6.2p1-1 -> 6.2p2-1)
[2013-06-05 13:11] [PACMAN] upgraded opera (12.14.1738-1 -> 12.15.1748-1)
[2013-06-05 13:11] [PACMAN] upgraded xfce4-panel (4.10.0-1 -> 4.10.1-1)
[2013-06-05 13:11] [PACMAN] upgraded orage (4.8.4-1 -> 4.8.4-2)
[2013-06-05 13:11] [PACMAN] upgraded pcmciautils (018-6 -> 018-7)
[2013-06-05 13:11] [PACMAN] upgraded perl-bit-vector (7.2-2 -> 7.2-3)
[2013-06-05 13:11] [PACMAN] upgraded perl-digest-sha1 (2.13-3 -> 2.13-4)
[2013-06-05 13:11] [PACMAN] upgraded perl-gd (2.49-1 -> 2.49-2)
[2013-06-05 13:11] [PACMAN] upgraded perl-html-parser (3.69-2 -> 3.71-2)
[2013-06-05 13:11] [PACMAN] upgraded perl-image-exiftool (9.13-1 -> 9.27-1)
[2013-06-05 13:11] [PACMAN] upgraded perl-net-ssleay (1.52-1 -> 1.54-2)
[2013-06-05 13:11] [PACMAN] upgraded perl-io-socket-ssl (1.81-1 -> 1.94-1)
[2013-06-05 13:11] [PACMAN] upgraded perl-json (2.53-2 -> 2.58-1)
[2013-06-05 13:11] [PACMAN] upgraded perl-json-xs (2.33-1 -> 2.33-2)
[2013-06-05 13:11] [PACMAN] upgraded perl-libwww (6.04-1 -> 6.05-1)
[2013-06-05 13:11] [PACMAN] upgraded perl-locale-gettext (1.05-9 -> 1.05-10)
[2013-06-05 13:11] [PACMAN] upgraded perl-lwp-protocol-https (6.03-1 -> 6.04-1)
[2013-06-05 13:11] [PACMAN] upgraded perl-net-dbus (1.0.0-2 -> 1.0.0-3)
[2013-06-05 13:11] [PACMAN] upgraded perl-test-pod (1.46-1 -> 1.48-1)
[2013-06-05 13:11] [PACMAN] upgraded perl-text-iconv (1.7-7 -> 1.7-8)
[2013-06-05 13:11] [PACMAN] upgraded perl-tree-dag-node (1.07-1 -> 1.11-1)
[2013-06-05 13:11] [PACMAN] upgraded perl-xml-parser (2.41-3 -> 2.41-4)
[2013-06-05 13:11] [PACMAN] upgraded perl-yaml-syck (1.22-1 -> 1.27-1)
[2013-06-05 13:11] [PACMAN] upgraded poppler-glib (0.22.2-1 -> 0.22.4-1)
[2013-06-05 13:11] [PACMAN] upgraded poppler-qt (0.22.2-1 -> 0.22.4-1)
[2013-06-05 13:11] [PACMAN] upgraded pptpclient (1.7.2-4 -> 1.7.2-5)
[2013-06-05 13:11] [PACMAN] upgraded protobuf (2.5.0-1 -> 2.5.0-3)
[2013-06-05 13:11] [PACMAN] upgraded rtkit (0.11-1 -> 0.11-2)
[2013-06-05 13:11] [PACMAN] upgraded sbc (1.0-1 -> 1.1-1)
[2013-06-05 13:11] [ALPM-SCRIPTLET] >>> If you have per-user copies of configuration files (such as client.conf,
[2013-06-05 13:11] [ALPM-SCRIPTLET] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
[2013-06-05 13:11] [ALPM-SCRIPTLET] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
[2013-06-05 13:11] [ALPM-SCRIPTLET] may refuse to start due to configuration errors.
[2013-06-05 13:11] [ALPM-SCRIPTLET]
[2013-06-05 13:11] [ALPM-SCRIPTLET] >>> Autospawn is now disabled by default. If you need to run PulseAudio outside
[2013-06-05 13:11] [ALPM-SCRIPTLET] of an X session, either:
[2013-06-05 13:11] [ALPM-SCRIPTLET] - Enable autospawn in client.conf, or
[2013-06-05 13:11] [ALPM-SCRIPTLET] - Start it manually by executing 'pulseaudio --start'
[2013-06-05 13:11] [PACMAN] upgraded pulseaudio (3.0-2 -> 3.0-3)
[2013-06-05 13:11] [PACMAN] upgraded python2-zope-interface (4.0.3-1 -> 4.0.5-1)
[2013-06-05 13:11] [PACMAN] upgraded reiserfsprogs (3.6.22-1 -> 3.6.22-2)
[2013-06-05 13:11] [PACMAN] upgraded rfkill (0.4-7 -> 0.5-1)
[2013-06-05 13:11] [PACMAN] upgraded rsync (3.0.9-5 -> 3.0.9-6)
[2013-06-05 13:11] [PACMAN] upgraded rxvt-unicode (9.18-1 -> 9.18-5)
[2013-06-05 13:11] [PACMAN] upgraded sdl_image (1.2.12-2 -> 1.2.12-3)
[2013-06-05 13:11] [PACMAN] upgraded seahorse (3.6.3-1 -> 3.8.2-1)
[2013-06-05 13:11] [PACMAN] upgraded skype (4.1.0.20-6 -> 4.2.0.11-1)
[2013-06-05 13:11] [PACMAN] upgraded slim (1.3.5-2 -> 1.3.5-3)
[2013-06-05 13:11] [PACMAN] upgraded subversion (1.7.8-1 -> 1.7.9-6)
[2013-06-05 13:11] [PACMAN] upgraded sudo (1.8.6.p7-2 -> 1.8.6.p8-2)
[2013-06-05 13:11] [PACMAN] upgraded sysvinit-tools (2.88-9 -> 2.88-11)
[2013-06-05 13:11] [PACMAN] upgraded systemd-sysvcompat (198-2 -> 204-3)
[2013-06-05 13:11] [PACMAN] upgraded terminator (0.96-4 -> 0.97-1)
[2013-06-05 13:11] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-06-05 13:12] [ALPM-SCRIPTLET] recreating all formats... done.
[2013-06-05 13:12] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-06-05 13:12] [PACMAN] upgraded texlive-bin (2012.0-8 -> 2012.0-12)
[2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.BkYRWYLQwd...
[2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2013-06-05 13:13] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
[2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2013-06-05 13:13] [ALPM-SCRIPTLET] done.
[2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: recreating all formats...
[2013-06-05 13:13] [ALPM-SCRIPTLET] done.
[2013-06-05 13:13] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-06-05 13:13] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
[2013-06-05 13:13] [ALPM-SCRIPTLET] see http://wiki.archlinux.org/index.php/TeX_Live
[2013-06-05 13:13] [PACMAN] upgraded texlive-core (2012.28273-1 -> 2012.29661-1)
[2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-06-05 13:13] [PACMAN] upgraded texlive-bibtexextra (2012.28244-1 -> 2012.29663-1)
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.PCRnjpu2LX...
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2013-06-05 13:14] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2013-06-05 13:14] [ALPM-SCRIPTLET] done.
[2013-06-05 13:14] [PACMAN] upgraded texlive-fontsextra (2012.28268-1 -> 2012.29646-1)
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-06-05 13:14] [PACMAN] upgraded texlive-formatsextra (2012.26689-1 -> 2012.29110-1)
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.wUzwlpN7S4...
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2013-06-05 13:14] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2013-06-05 13:14] [ALPM-SCRIPTLET] done.
[2013-06-05 13:14] [PACMAN] upgraded texlive-games (2012.28243-1 -> 2012.29679-1)
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-06-05 13:14] [PACMAN] upgraded texlive-genericextra (2012.28210-1 -> 2012.29501-1)
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-06-05 13:14] [PACMAN] upgraded texlive-htmlxml (2012.28273-1 -> 2012.29474-1)
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.OUUwjPH5PT...
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2013-06-05 13:14] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2013-06-05 13:14] [ALPM-SCRIPTLET] done.
[2013-06-05 13:14] [PACMAN] upgraded texlive-latexextra (2012.28272-1 -> 2012.29701-1)
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-06-05 13:14] [PACMAN] upgraded texlive-humanities (2012.28280-1 -> 2012.29347-1)
[2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving uIt has solved itself today. After making a -Syu today and installing a newer kernel then reinstalling catalyst-dkms from AUR it is working again!! )))) Marking as solved.
Kernel: 3.9.5-1-ARCH
Catalyst-dkms: 13.1-2 (instead of newest 13.4-1)
Last edited by szebenyib (2013-06-14 12:02:42) -
Laptop-mode-tools no longer adjusts LCD brightness
I just discovered that laptop-mode-tools no longer adjusts the brightness of the LCD when switched to battery. This is not a general issue. laptop-mode is active on battery (as well as being enabled via the systemd service), the computer knows it is on battery (checking with on_ac_power and reading from /sys/class/power_supply/*/* give the expected results) and other things are correctly adjusted e.g. bluetooth is blocked with rfkill. Moreover, as root I can adjust the brightness in the usual way by hand:
echo 10 >| /sys/class/backlight/acpi_video0/brightness
works just fine. The >| is needed because for interactive shell's, root's .bashrc sets noclobber. This obviously doesn't affect laptop-mode tools because it doesn't run an interactive shell. In contrast:
$ cat /etc/laptop-mode/conf.d/lcd-brightness.conf | grep -v "^#"
DEBUG=1
CONTROL_BRIGHTNESS=1
BATT_BRIGHTNESS_COMMAND="echo 7"
LM_AC_BRIGHTNESS_COMMAND="echo 10"
NOLM_AC_BRIGHTNESS_COMMAND="echo 12"
BRIGHTNESS_OUTPUT="/sys/class/backlight/acpi_video0/brightness"
DEBUG wasn't 1 when the problem started. I tried setting it to get more info but haven't found anything more in the journal/logs.
KDE is set to not touch the default brightness at all. All it does is (further) dim the display after so many minutes depending on the power supply and status.
This did work fine but I haven't been on battery for a while so I'm not sure when exactly it stopped working. My brightness is set by default to 12 on boot or wake from sleep which suggests laptop-mode tools does something or something else is now handling this which I'm not aware of. But the switch to battery does not trigger any alteration in the brightness and laptop-mode status does not even mention LCD brightness as one of the things laptop-mode tools controls.
Have I missed a change in how this is handled somewhere?I doubt this is related but it is currently my only lead so here goes. I set the LCD brightness control for debug so I've been trying to watch it. However, so far it is all smiles e.g. on boot it all works fine and says so.
However, I found I'm getting another error on boot which is
/usr/share/laptop-mode-tools/modules/pcie-aspm: line 10: write error: Operation not permitted
Note that I copied that by eye from VT1 so if a colon is out of place, that's why.
The contents of that file is:
#! /bin/sh
# Laptop mode tools module: PCIe Active State Power Management
if [ x$CONTROL_PCIE_ASPM = x1 ] || [ x$ENABLE_AUTO_MODULES = x1 -a x$CONTROL_PCIE_ASPM = xauto ]; then
if [ $ON_AC -eq 1 ]; then
log "VERBOSE" "On AC power: setting pcie_aspm to default"
if [ -f /sys/module/pcie_aspm/parameters/policy ]; then
echo default > /sys/module/pcie_aspm/parameters/policy
if [ $? -eq 0 ]; then
log "VERBOSE" "PCIe ASPM set to 'default'"
else
log "VERBOSE" "PCIe ASPM tweaking is prohibited by the kernel"
fi
else
log "VERBOSE" "PCIe ASPM is not available"
fi
else
log "VERBOSE" "On battery: setting pcie_aspm to powersave"
if [ -f /sys/module/pcie_aspm/parameters/policy ]; then
echo powersave > /sys/module/pcie_aspm/parameters/policy
if [ $? -eq 0 ]; then
log "VERBOSE" "PCIe ASPM set to 'powersave'"
else
log "VERBOSE" "PCIe ASPM tweaking is prohibited by the kernel"
fi
else
log "VERBOSE" "PCIe ASPM is not available"
fi
fi
else
log "VERBOSE" "PCIe ASPM power savings module is disabled"
fi
So I assume it is saying it cannot write to /sys/module/pcie_aspm/parameters/policy but the permissions etc. on that, at least, don't look strange:
l /sys/module/pcie_aspm/parameters/
total 0
drwxr-xr-x 2 root root 0 Gor 25 21:24 ./
drwxr-xr-x 3 root root 0 Gor 25 21:23 ../
-rw-r--r-- 1 root root 4.0K Gor 25 21:24 policy
Last edited by cfr (2013-07-25 20:47:13) -
How to increase brightness in Windows 7 and for the Option sceen?
I have an 15" early 2011 MBP with Snow Leopard and reccently installed 64-bit Windows 7 Pro using an upgrade disk I had. Apparently the backup/upgrade disk would allow me to do a clean install despite not having a previous version of windows to base it off of now that XP is no longer supported.
I had no initial problems installing Windows and getting the bootcamp software fully updated (3.2 I believe,) but while I was in the process of updating all of my windows software things started getting messy. I managed to update some windows functions, but eventually I ran into a real problem after downloading what I believe to be a service pack (not sure which one) that was recommended by the windows updater. After downloading the update, the computer needed to be reset.
Upon resetting the laptop, I found that the option screen that lets you choose which partition to boot into is completely black. I can tell that the display is on because the screen is somewhat brighter than when the laptop is off, but I can't see anything.
For grins, I tried seeing if hitting the right arrow key and then enter would take me to my windows partion, which it did. The loading screen (with the windows icon approaching and illuminating) is completely fine; however, after that loading screen, the screen appears to turn off (nothing, zilch, nada.) I let it sit there for about 5 minutes or so and still had nothing. Upon hard-resetting my computer, I found that when I tried booting windows again it gave me the options to boot into safe mode. Safe mode works and gives full brightness, normal mode does not.
I looked on the forums and saw that deleting C:\WINDOWS\SYSTEM32\DRIVERS\ATIKMDAG.SYS could fix the issue. I downloaded Paragon, mounted the bootcamp partition and removed the offending file from my mac partition.
The option screen was still black, but the login screen appeared after the computer tried to finish patching (the service pack patch failed.) The problem then was that the screen was incredibly dim at full brightness. I had control of the brightness settings via fn+f1/f2. All it took was dimming the screen 3 notches in order to make it go completely black. I logged in and tried updating the radeon video card, reset the computer and found myself back at the off screen issue mentioned earlier after the windows loading screen.
I have yet to check, as this process has been extremely tiring and annoying, but I think I can fix the completely dead screen by removing the driver again. I gave this long story to show what I have done so hopefully I cam get a response I
My burning questions are:
What do I need to do to get the screen back to full brightness when I do get my laptop to boot into windows successfully?
How do I fix my option screen to actually show up again instead of blindly picking the partition I want to boot into?
Are there any windows updates that I need to avoid for 64-bit windows 7? I'm guessing whatever service pack it was I downloaded is one of them.I don't use the search engine, so I'm afriad I don't have direct experience here.
What I'd probably do is modify the app so that it looks at the Host data to determine which directory it should point to for graphics, formatting, etc. You could also use the obj.conf with variables to pull graphics from directories appropriately branded. Something like:
1) Create "additional doc directory" for images
2) Find the entry in the obj.conf that points to the new directory
3) Modify the path to something like /path/to/$host/images
4) Make sure you create directories like:
/path/to/foobar.com/images/
/path/to/www.foobar.com/images/
/path/to/baz.com/images/
/path/to/www.baz.com/images/ -
Brightness at Windows 7 not working - solved
In my T400 with Windows 7 installed I had the problem that the brightness adjustment didn't work.
I searched all forums and installed all new released drivers for Windows 7 (released version) but it didn't solve my problem (including hotkey-driver).
Now I got it: I installed the new BIOS for my T400 and now all is working properly.You can start up from your Mac hard drive, you just need to hold down the option key when restarting your iMac, also this link will help you solve the Windows problem. http://support.apple.com/kb/TS2600
-
Why does LR4 show brightness changes after external processing in CS4?
I am an experienced user of Lightroom and get excellent results. But an anomaly is puzzling me. I capture images in DNG format and download to a PC Windows 7 using a calibrated Eizo graphics monitor. Before exporting and delivering a processed image I ensure that there is no unacceptable clipping showing on the histogram. I export 16 bit files which are only converted to 8 bits immediately prior to delivery. Recently I have adopted the procedure of importing a copy of the final delivery image back into LR4.3 for better library management. (There are often keyword changes or other refinements in the delivered image) Occasionally I notice that some pictures are noticeably brighter than the existing LR processed masters which formed the basis of the above operation. So I did some tests.
I selected an image with wide tonal range, adjusted it in Develop module to meet my 'no unacceptable clipping' rule and exported it as described above into CS4. My working colour space is Adobe RGB 1998 and Color Management is set to 'RGB Preserve Embedded Profiles'. In CS4 I only changed the mode from 16 to 8 bits and then saved the file using a modified name. That was the only processing done in CS4. Both files (8 bit and 16 bit) were then re-imported back into LR4 and the histograms compared with the original modified master file. In both cases they showed highlight clipping indicating that the image is brighter than when starting the final processing in CS4. In most cases the extra brightness is not a big problem; but in some instances it is quite unaccepable and I could not use that version without further processing in LR4. Mode change does not seem to be the culprit.
Can anyone help me to understand what I might be doing wrong to bring about these unwanted involuntary changes to normally processed files? Thank you.What colorspace do you have configured in LR for your TIF Edit-In export to PS? Since PS is out-of-date with respect to LR, presumably you are using the Edit with LR Adjustments option not the Open Anyway option.
What happens if you don’t change to 8-bits in PS?
What happens if you merely export the TIF from LR and re-import it? With variations being: if the Export bit depth is 8 bits vs 16 bits and if the Export colorspace is ProPhotoRGB vs AdobeRGB?
Do you somehow have lens-profile corrections set as the default for TIF Imports or any non-zero Toning being applied on Import? The LR defaults for TIFs can be set independently from the defaults for raws.
What happens if you use ProPhotoRGB in your Edit-In export settings and as your working space in PS?
What happens to the histogram if you soft-proof to Adobe RGB in LR?
Is your monitor calibrated with a hardware calibrator? If so is the profile ICC V2 or ICC V4? -
Iphone 5 Ios 6.1.4 brightness problem
I have a problem with my iphone 5 running ios 6.1.4
Randomly, sometimes when pushing the home button, or pressing the power button, the brightness of the screen goes all the way down to zero (dimly lit).
I have to go in to settings and tap the brightness to get it to back to full.
(the slider bar shows maximum even if the screen is dark - auto brightness is set to off)
I've read many posts about calibrating , using auto-brightness etc., but I have auto-brightness set to OFF, and the brightness set to maximum. That is the way I like it.
So any ideas whats going on? How to fix the issue. I repeat - I do not want to use auto-brightness, I simply want the iphone brightness to be set to maximum, at all times.
Thanks
MikeYour phone is inappropriately going into pre-autolock dimming. Try:
1. Reset phone (no data loss): press both power and home buttons for at least 10 seconds, releasing when the Apple logo appears.
2. Restore in iTunes using a backup
3. Restore in iTunes as new, without a backup.
If #3 doesn't help, there is a hardware problem that needs warranty service.
iTunes: Restoring iOS software -
Blackberry needs to sort out he brightness issue on the Q10 - Its very bad
Blackberry needs to release an update for its Q10 device ASAP. The device has brightness issues since it was launched. In a response to a Forum member's complaint about the screen dimness, a support staff here said that's how the device is made with no auto-brightness toggle to conserve battery. I believe customers should be given the options to turn on or off this option as they wish. Please fix this problem BB
No he doesnt have a screen problem Jason. It is the Q10 that has a screen problem. Stop misleading people here. Blackberry needs to come up with a fix. The fact that they are not even responding to peoples' concerns on the Forum shows why they will continue to suffer pooor sales.
I am extremely disapointed at Blackberry!! -
Satellite U400-15B screen isn't bright as it used to be
Good morning everyone
I have had my U400-15B nearly a year now and I've noticed the screen isn't as bright as it used to be.
The brightness level is on maximum but it just seem a little dull.
Has anyone else noticed this or is it just the LCD panel not being very good?Hi
> The brightness level is on maximum but it just seems a little dull.
So you are saying that you have already checked the FN + F7 key combination which increases the display brightness?
Well, maybe there is an FL inverter issue?
The FL inverter is a small part which controls the display brightness.
If this part starts to malfunction then you will see everything on the display like behind a thick fog.
If this is a case then you should get in contact with an local service technician whu could replace this.
PS; if you are running Win 7 then you should go to the Win 7 power management and should check if the Win 7 didnt set the display brightness to the lower level in order to save the battery power. The Win 7 supports an economy mode which tries to save the power -
Cinema Display too bright upon waking up
Whenever my cinema display wakes up from sleep, the screen is really bright (ie washed out). It'll stay that way until I open up the Displays control panel, then it will reset to the correct profile. It's not a critical issue but an irritation. Anyone else experiencing this problem/have a solution?
I have the exact same problem on a 30" cinema display. I've tried to adjust color settings in Sys prefs, downloaded DarkAdapted (which works well with the ACD but completely messes with my second display colors apart from being a hassle to launch it every time) and that's all I could do about it so far. Frankly my eyes hurt every night I use it, I even prefer to use only my 15" MBP because I feel it's doing damage to my eyes. This is just ridiculous, it's wonderful to have a bright 2560x1600 screen when you are working open air in a Hawaiian beach but is it so hard to make the screen darker when you are an urban night worker?
APPLE PLEASE WE NEED NATIVE SOLUTIONS!!! (before I get blind or sell it on ebay if possible!) -
Beats Audio Software and On Screen Volume and Brightness Icons Not Showing
Hi,
I have a HP Envy 6 Ultrabook 6-1010ea, It had to have a new hard drive due to hardware failure and now I have it back I can't find the beats audio symbol and the associated software, also the on screen displays of the volume control and broightness icons don't appear anymore, when I download certain drivers to solve the issues each one doesn't see, to work with the other, I can get sound back on the internet OR the icons back.
If you could help I'd be very greatful, thanks.Hi:
You should be able to use this audio driver for the Beats audio.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107829-1&cc=us&dlc=en&lc=en...
This software should restore the on screen display of the brightness and audio levels.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106851-1&cc=us&dlc=en&lc=en... -
My ipod touch 4th gen battery only lasts for 3 hours with wifi and brightness fully down
My ipod touch 4th gen battery life if asful only lasts a maxium of 3 hours with wifi turned off and brightness fully down any suggestions?
You can try restoring the iPod. However, it could be that the battery is going bad.
Apple will exchange your iPod for a refurbished onewith a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the followingwill rplace it for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. You can purchace a replacement battery for about $10
iPod Touch Repair – iFixit
Maybe you are looking for
-
Number pad not working on keyboard ?
My number pad on keyboard seems to be locked and don't know how to unlock
-
Processing of a Form when a WEB Service is not available
Has anyone else noticed this or has a work-around suggestion? Note I am very new to this product. Background: We tied a WEB service call to a button on our PDF Form. When the user started the process they filled in the form but did not use the button
-
Please, answer me about this AWT problem!!
Hi everybody, this is the problem: how can I exit from an AWT window without writing System.exit(0); I'm working with JES and it obviously crashes after this command, please, help me !! Thank's in advance, Bye! Stefano Moro Turin, Italy
-
BDC example for vendor confirmation.
Hi, Can someone give an example of a bdc program for confirmation of mutiple vendors.... URGENT. Thanks Pradeep.
-
My new MacBook Pro can't get an update of iPhoto at the app store
I bought a new MacBook Pro last week and see that the App Store has an update of iPhoto. However there is an error message that says"You can not update this software since you have not owned the major version of this software". I assumed that by purc