6500 - 3750 rx oversizedpkts problems

We have 2 3750 stacks connected to 2 6500 switches.
One stach is connected to a 6513 switch and has no problems.
The other stach is connected to a 6506 switch and on the truk ports we get a lot of rxoversizedpkts on the 6506.
We don't use jumbosize and MTU size is equal.
What is it we doing wrong?

What version of code u r running :
Here is the exp:
Release Notes
A Catalyst 6500 may increment giants on 67xx cards for ports that are trunking.
This does not affect the performance of the switch, and is purely cosmetic.
Fixed in Version: 8.6(0.21)TAL, 8.4(0.61)RCC03, 8.5(0.5)JAC, 12.2(17d)SXB11
Found in 12.2(18)SXD
HTH,
-amit singh

Similar Messages

6500 classic - security settings problem

I have Nokia 6500 classic and I have a little problem with it. When I go to the Security settings menu Security module settings is not active. When I push on it it tells me to Insert security module. Can someone explain to me what should I do because there is nothing in the users manual about the security options.
Thank you in advance!!!

If you don't have a security module (not many people do) then you will never need to use this option.
Security modules are expensive and are used by certain agencies that need heavily encrypted lines.

Officejet 6500 E709a driver software problem

PROBLEM - driver software does not stay connected to PC.
Purchased this printer new 10 days ago and successfully downloaded full feature driver software package from HP web site. Install to my network with Ethernet cable went fine. 3 days ago, could not print from HP PC. Message said printer not connected. HP Chat tech advised me to uninstall existing software and repeat download and install process. Everything went okay. Today, same problem that printer no longer connected. I have repeated the uninstall/download/install process. Process went okay.
Have others experienced the same problem? Is this an issue with HP software or does it indicate a problem with my printer?
Thanks in advance for any thoughts or ideas.

Hi Tim49,
I understand you've been having some issues getting Windows 7 drivers for your Officejet 6500 printer. I'm sorry to hear you've been having this problem, but I will certainly do my best to help.
There are definitely Windows 7 drivers for your printer. You can access the download by clicking here, you will just need to select whether you have a 32-bit or 64-bit system. To figure out which you have, just click on your Start menu, right click on Computer (should be on the right side of the menu) and then click on Properties. In the window that opens you should be able to see which system you have and then proceed to the link I provided and download the HP Full Feature Software and Drivers.
Hope this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Nokia 6500 phone software update problem

i m having nokia 6500s-1. product key is 0556765. the software version is 4.04. now 7.62 version for 6500s is available. but my product key is not showing any upgrade version of phone software. again my phone sometimes hang and restart while talking. the theme also shift to default theme suddenly. what can i do ???

Hi there Hamraam, been reading this thread and if you continue to have the problems with your phone, I would suggest taking your phone to your local Nokia Care Centre for them to take a look at. That is strange that calendar entries and personalised settings are not being restored to your phone after the update.
It is unlikely that Nokia will release another firmware update for the 6500 Slide. It was released in October 2006 or thereabouts, same as the 5610 XpressMusic, and with the release of newer models, the support cycle for the 6500 Slide has most likely ended with the release of the last update, 10.00, for unbranded product codes of the handset.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

6500 Slide Ridiculus speaker problems.

Hi,
I have had my 6500 slide for 5 months, and in 5 months have had 5 handsets as everytime the speaker fails within days.
I have had my current one 1 week and it has gone already, it is amazing they are allowed to keep selling these phones.
I am about to take mine back to carphone and argue until they change it to another model, if I have to put up with this for another year I will go mad.
Has anybody else had this problem?
Thanks, Tim

true, well i have had my nokia slide for about a month now, but just today i've realised that when i call people and when they call me, i cannot here anything through the speaker... but they can hear me.
but otherwise when i'm playing music and such on the phone the speaker works fine.
.... i dunno, this is probably a different problem to yours..
but anyway

3750 --ISL-- 1912 problem

When port on 3750 is in access mode (vlan 24), and port on 1912 is trunk off, everything is ok. But now I need to communicate the devices via ISL trunk. I had configured both machines by the appropriate tech docs, but i have troubles...
On 1912 machine:
ip address 10.195.60.2 255.255.255.0
ip default-gateway 10.195.60.1
interface FastEthernet 0/26
duplex full
trunk On
On 3750 machine:
interface GigabitEthernet2/0/20
description Trunk to Cisco 1912
switchport encapsulation isl
switchport mode trunk
no mdix auto
interface Vlan24
ip address 10.195.60.1 255.255.255.0
In this way configuration (trunking), there is no ping between them.
May be i do something wron? PLS HELP!

Hm... now i had configured `Meri` on both devices. But still the same problem. May be trouble in the difference of VTP versions?
Statistics:
3750s#show vtp counters
VTP statistics:
Summary advertisements received : 0
Subset advertisements received : 0
Request advertisements received : 46507
Summary advertisements transmitted : 147343
Subset advertisements transmitted : 46516
Request advertisements transmitted : 0
Number of config revision errors : 0
Number of config digest errors : 0
Number of V1 summary errors : 0
VTP pruning statistics:
Trunk Join Transmitted Join Received Summary advts received from
non-pruning-capable device
Gi1/0/1 0 0 0
Gi1/0/2 0 0 0
Gi1/0/4 0 0 0
Gi1/0/8 0 0 0
Gi1/0/12 0 0 0
Gi2/0/5 0 0 0
Gi2/0/8 0 0 0
Gi2/0/15 0 0 0
Gi2/0/19 0 0 0
Gi2/0/20 0 0 0
Catalyst_1912#show vtp statistics
Receive Statistics Transmit Statistics
Summary Adverts 4 Summary Adverts 5
Subset Adverts 0 Subset Adverts 4
Advert Requests 0 Advert Requests 50
Configuration Errors:
Revision Errors 0
Digest Errors 0
VTP Pruning Statistics:
Port Join Received Join Transmitted Summary Adverts received
with no pruning support
A 0 0 0
B 0 0 0

Nokia 6500s Slide Animated Wallpaper problem

Has anyone else had this problem. I have the 6500 Slide phone with version 10 rm240 firmware on it and downloaded a theme onto it which has a flash file of a clock and date on it and falling snow. Everything runs fine the snow falls on the standby wallpaper and in the screensaver until I put on the bluetooth then the trouble starts, the clock stops (seconds as well and the second hand on the analog clock) and the snow stops falling. It is almost like the bluetooth turned on is conflicting with the swf file. Anyone else experienced that or is it just with my handset? Thanks.

...... can anyone help? - i cant even get an answer from nokia support when i emailed them!

Nokia 6500s-1 Slide Screen Problem

Hi All,
I bought a new Nokia 6500s-1 (Slide ) , at the first use i noticed that the screen starts to blink when i review the menu icons, then when i use the options menu ,when i use the special characters in the massge, when i take a picture and i want to review it a white row in the middle of the screen blinks , but while im playing games no blink happened if the phone was not touched nothing happened too,
is this a software problem or a screen problem ? i feels dissapionted from this mobile model even so its not a cheap one.
please any suggestions ? i'm waiting a replay

I have got a Nokia N95 and it has been working fine until this morning i turned the mobile on and then everytime i pressed the down button on the mobile froze and the screen kept getting lighter and lighter till it was white then it would bring up the screen from befor but it had gone down the icon or on to my contacts (down key on stand by screen) the screen has also started to move across from where it was and where the screen had moved the pixels from the right had side of the screen to the left had side.
I have tried all the soft and hard resets and also updating the software up to the v31.0.017 and there is no warrenty left on the device
what can I do to sort out the problem with my phone?
if anybody can help me please contact me and put for the subject of the email faulty screen or something similar
Moderator's Note:
Removed personal details. PM sent to user.
PM to user:
We have removed your personal details as it is unwise to publish it publicly on this forum.

EA 6500 server set up problem

I just purchased the EA 6500 router to replace my D-link DIR-665 and I am running into a problem with my web server, VNC remote access software, and Teamspeak 3 server.
I've used the DCHP reservation tool to designate the server's IP address on the network and used the single port forwarding feature to unlock all the same ports that I did on my old router; 80 & 443 (basic server) 9987 (teamspeak 3) and 5900 (for the VNC server).
I am running windows server 2008 rs enterprise on the server. The server can get out onto the internet; however, it cannot see the web page when checking it from the "browse web site" (from the server manager). The website is also not visible from any other pc going to it from the internet. Additionally, the VNC software cannot find the server either through the web address (XXXXXX.com) or by typing in the specific ip address on the network. Teamspeak is having the same issue in that people cannot connect to the server.
I have an account with easy dns and I am using dynsite on the server as I do not have a static IP address from my ISP.
As far as I can tell I've set everything correctly. and everything matches the settings on my old dlink router. For the life of me I cannot figure out what is stopping the web server from reaching the internet properly.
Any help/suggestions are appreciated. I'm at my wits end here and am about to just return the router for a refund.

Ravensnow wrote:
The issue smentioned indeed make this router (now a belkin router as belkin bougth it) totlaly unuseable. I had to throw out 2 of these just because of that silly reverse NAt totally not working. Odd thing is that this does work on most other non belkin/linksys routers.
I am assuming Linksys setup their new routers this way for security reasons. To test if certain functions behind the router are working, you need to do it from outside the network. By the way, I found something from the net about DNS Rebinding Attacks. This might be the reason why Linksys designed their new routers that way. Please click on the following link to know more:
http://blog.trendmicro.com/trendlabs-security-intelligence/protecting-your-router-against-possibl-dn...

Officejet 6500 E710n Moved network problems

Hi, I previously posted on being unable to modify existing devices in windows 7. the post is here:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/officejet-6500-E710n-Moved-network-how-...
The fix fixed the printer however now when we go to use the scanner with in the HP software it says device can not be found. It also used to give the option to scan when you double click on the device.
PC configuration has not changed and you can access the scan function through the web console. The only change there has been is the change in network address of PC's and printer.
Any help would be gratefully recieved!
Cheers
DT

Hi DT,
Thank you for posting,
As the IP address o fte printer has changed, you are experiencing this issue.
In oerder to resolve the issue, please click on Start and click on All Programs and Click on HP. Under HP you will find the printer Folder, click on that and click on Update IP address and enter the new IP address of the printer and follow the on screen instructions.
This should resolve the issue.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

HP 6500 AIO printer scanning problems.

I recently upgraded my Mac OSX software to Snow Leopard. Now the scanner part of my HP printer no longer works. I'VE SCANNED MANY TIMES PREVIOUSLY. I tried to scan today and got messages to the effect, no scanner options, scanner was not connected to the computer, scanner not found, no scanner selected; the scanner is not initialized...
I've done the following: tried to get help from HP- they said as long as my driver sw was up to date (which it is) i should contact Apple. I tried to add the scanner - didn't work; setup printer again - didn't work; setup profile for scanner - didn't work; read thru scanner help topics on apple support - didn't help. What's going on and how do i fix it?
thx.

It doesn't install a driver version 2.7. It does in fact install for your printer driver 3.1.1. In as much as you already have that driver installed there is some other reason why you are having issues. Contact HP to resolve the scanning problem.
There is third party scanning software which is much better than HP's. Check compatibily with VueScan.

I have an HP Officejet 6500 E709n wireless printing problem

I am using a macbook and Safari 10.6.8. When I set the HP printer to work wireless over the home modem it will work just fine for awhile. Then some days later it won't find the printer and I have go to the printer and re-enter everything to get it back online to print wireless again. I have to do this over and over. I have downloaded the lasted updates for the printer and no change. Has anyone else run into this and found any solutions. Thanks for any expertise.
Tom

How does your printer get its IP address? If it uses DHCP, try a static address. I had symptoms similar to yours, but after giving it a static address, I've not had problems printing or scanning. I suspect that when the printer goes to sleep, it does not reconnect to the network properly. And, same as you, rebooting things works for a while. I've only just tried this today, so I don't want to say its definitively fixed, but up until now, printing/scanning would work until it went to sleep. If I'm proven wrong, I'll post again.

6500 classic missed call problem

Here´s another problem I have noticed:
If I miss a call, see who the caller was and "redial" them the sound is all messed up (both the sound from and to the caller). It sounds like the voices go through a bucket and waterfall at the same time. Its impossible to hear anything.
I then have to hang up and dial normally - then the sound is as normal.
Anyone who has the same experience and any suggestions towards fixing it?
Best Regards,
Kapers

If you don't have a security module (not many people do) then you will never need to use this option.
Security modules are expensive and are used by certain agencies that need heavily encrypted lines.

VPLS 6500 - 3750 ME ??

Hello all,
Is there someone that can answer me if the following is possible :
I´m rebuilding our network (metro ethernet) using 3 6500 (sup3 pfc3bxl) and 3750ME for redundancy.
I will do an L3 ring for the 6500:s and connect the ME:s to the neighboring 6500. What i would like to do
is multipoint EoMPLS (VPLS) so that i can get the same L2 in each of the pop:s. We have some service-
providers that require the same L2 in all
the network. I have tried to use vfi:s but they will not come up. Point to Point
works fine but the setup/redundancy becomes a mess. In a pefect world i would like to do hsrp for loopback int
and use that as tdp router id but that
does´nt work so i would welcome suggestions regarding redundancy.
This is what i´ve done:
l2 vfi pelle manual
vpn id 10
neighbor 172.31.254.101 encapsulation mpls
neighbor 172.31.254.102 encapsulation mpls
neighbor 172.31.254.103 encapsulation mpls
interface GigabitEthernet5/1.332
encapsulation dot1Q 332
xconnect vfi pelle
Regards
Jonas

Here it goes....
Operator-6500#show mpls l2 vc detai
Local interface: VFI pelle up
Destination address: 172.31.254.101, VC ID: 10, VC status: down
Tunnel label: not ready, LFIB entry present
Output interface: unknown, imposed label stack {}
Create time: 04:01:30, last status change time: 03:29:40
Signaling protocol: LDP, peer 172.31.254.101:0 up
MPLS VC labels: local 210, remote 214
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 0, send 0
byte totals: receive 0, send 0
packet drops: receive 0, send 0
Local interface: Gi5/1.120 up, line protocol up, Eth VLAN 120 up
Destination address: 172.31.254.101, VC ID: 120, VC status: up
Tunnel label: imp-null, next hop 217.31.175.178
Output interface: Gi3/1, imposed label stack {213}
Create time: 04:19:57, last status change time: 04:01:20
Signaling protocol: LDP, peer 172.31.254.101:0 up
MPLS VC labels: local 186, remote 213
Group ID: local 9, remote 17
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 0, send 0
byte totals: receive 0, send 0
packet drops: receive 0, send 0
Operator-6500#
tele-6500#show mpls l2 vc detai
Local interface: VFI pelle up
Destination address: 172.31.254.100, VC ID: 10, VC status: down
Tunnel label: not ready, LFIB entry present
Output interface: unknown, imposed label stack {}
Create time: 04:01:53, last status change time: 03:29:36
Signaling protocol: LDP, peer 172.31.254.100:0 up
MPLS VC labels: local 214, remote 210
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 0, send 0
byte totals: receive 0, send 0
packet drops: receive 0, send 0
Local interface: Gi5/1.333 up, line protocol up, Eth VLAN 330 up
Destination address: 172.31.254.100, VC ID: 120, VC status: up
Tunnel label: imp-null, next hop 217.31.175.177
Output interface: Gi3/1, imposed label stack {186}
Create time: 04:20:23, last status change time: 04:02:37
Signaling protocol: LDP, peer 172.31.254.100:0 up
MPLS VC labels: local 213, remote 186
Group ID: local 17, remote 9
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 0, send 0
byte totals: receive 0, send 0
packet drops: receive 0, send 0
tele-6500#
Jonas

Nokia 6500 classic Remote Simm Problem

I have a nokia 616 car kit and when I try and pair the 6500 it goes into remote sim mode, where I want to use Hands free but cannot find anywhere to chnage this.
Any help how to turn it off the nokia 6500?
thanks in advance

The speakers on the 6500's are rubbish. Have got 5 X 6500 slides and 1 X 6500 classic at work. All have had both the speakers replaced, a couple twice, plus other issues.

6500 - 3750 rx oversizedpkts problems

Similar Messages

Maybe you are looking for