6500s Updater Installing Problems

I got my nokia 6500s a few months ago and my current software version is 03.80.
I have tried many times to install the updater unsuccessfully.
It goes well up to Step 5, when it actually installs.
An error message comes up saying this:
"Error 1720. There is a problem with this Windows Installer package. A script required for this install could not be run. Contact your support personnel or package vendor. Custom action Kill_process script error-2147217406"
I have also redownloaded the installer many times and read the FAQ, but it seems I am stuck at a point even beyond the FAQ since I havent successfully installed the Updater.
After I click close or ok on the Error message, another one comes up saying:
"Installation operation failed. Fatal error during installation."
Please Help. What do I need to do, or what am I doing wrong?
Do I need to go to a Nokia Care centre to get it updated?
Early thanks for your help.

Hi benkid123456,
alternatively you may want to download the Microsoft script at http://www.microsoft.com/downloads/details.aspx?familyid=C717D943-7E4B-4622-86EB-95A22B832CAA&displa... , then run it to update your files for Visual Basic® Script Edition (VBScript.) Version 5.6, JScript® Version 5.6, Windows Script Components, Windows Script Host 5.6, and Windows Script Runtime Version 5.6.
In most of the cases this procedure helped to fix the Installer problems...

Similar Messages

  • 10.4.11 combo update install problem

    Has anyone else had trouble installing the combo update from 10.4 to 10.4.11?? Mine almost finishes and says it encounters an unknown error and cannot finish the install. Says it moves the update to trash and says try again from the finder...
    HELP!!

    Updating
    Certain steps appear to minimize the risk of an update producing problems.
    Number one is to make sure you have a bootable clone backup of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
    Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk.
    [Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
    [Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
    [Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
    You can also go to the step of booting into safe mode to do the install.
    [Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
    [What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
    [Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
    I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
    Repair permissions again afterward.
    It helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
    The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
    Almost all of the above steps (except backup) have been questioned (e.g., [Permissons repair|http://www.macworld.com/article/52220-3/2006/08/repairpermissions.html] as to necessity. Probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe?
    [BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
    [Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]
    [Klaus1's post on updating and removing updates|http://discussions.apple.com/message.jspa?messageID=10257902] and [another one|http://discussions.apple.com/message.jspa?messageID=10402175]

  • ITunes 6 won't open - automatic update install problem???

    Hello,
    I have tried to install iTunes for the first time using the latest version and when I try to open it nothing happens. I have XP and I believe the automatic update install shield is blocking the installation of the program?? I do not have norton anti-virus and I have turned off the automatic update install in the control panel.
    Thanks,

    hi Guido!
    I have tried to install iTunes for the first time using the latest version and when I try to open it nothing happens.
    replying to you here rather than off in your other post. (let's stay in this thread.)
    off in that other post, you described seeing a little yellow shield in your task bar. is that a Norton live update notification, or a Windows update notification? (i've seen it in my task bar too, but i can't recall off-hand which one of those it's signifying.)
    love, b

  • Macbook pro EFI Firmware Update install problems

    i just finished downloading the recent macbook pro EFI Firmware Update. When the computer restarts, the computer runs for 30 sec and restarts again and repeats. I shutdown the computer and turn it back on again. i check updates and shows that i have to update macbook pro EFI Firmware again! same version.
    I checked my preferences on Software Update and went to Installed Software tab. Shows two macbook pro EFI Firmware 2.1 Updates installed.
    Anyone experience this?

    i checked system profiler boot room version is MBP81.0047.B04
    Ps. thanks for the response
                                                                                                                                            N8 the Fn' Gr8

  • Adobe Creative Cloud syncing/updating/installing problems

    Hello Forum,
    I am experiencing problems with the Adobe Creative Cloud application. It is telling me that 13 Adobe applications that I have deleted from my hard drive using the included uninstall apps are, right now, "Up to Date" on my hard drive. Additionally, when I try to re-install one of these deleted yet "Up to Date" applications (Acrobat Pro XI), I cannot because it's listed as "Up to Date."
    Does anyone know why the Cloud app is not updating itself since my uninstalls? Or what is lingering on my system that may be confusing it? If it's the latter, is there a universal uninstall app for all Adobe application files on one's hard drive? I figure if I can do that, I can start over fresh. I already used the Creative Cloud's own uninstall app to delete it and re-install it, though that didn't change the information it's giving me.
    Thanks in advance for anyone's help,
    Scott

    Hi Legendary Hearts,
    Please refer the kb: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.
    Regards,
    Romit Sinha

  • HP 6500 Uninstall/​Install Problems

    Well,
    I've toiled for 4 hours trying to re-install my hp 6500 that suddenly stopped working from my desktop (wired tcp).  I ended up downloading the CD and running it but alas it fails every time.  Usually when it tries to "discover" the network it hangs at 66%.  I've read reccomendations to do a complete uninstall but no instructions are provided for working from the downloaded software (vice CD).  I can still print from wireless laptops but not my desktop.  My last action was to try to install it via usb but that crapped out somewhere as well.  Any assistance would be most appreciated.
    MDR

    Hi dogtired,
    Welcome to the HP Support Forums! I see your HP Officejet 6500 stopped printing from your computer. You tried uninstalling and reinstalling the software but everytime you attempt the installations it stalls at 66%, usually when it is trying to discover the network.  I would love to get you back up and printing but require a little more information:
    1. What is the Exact model of HP 6500 Printer you are using (as there a few in the 6500 series)?
    2. What is your current Operating system, Windows or Mac and which version?
    3. How do you want the printer connected, USB or Wireless?
    4. Have you tried using the software download instead of the CD?
    If you have a Windows OS later than XP, please start here: HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know if the PSDR helps with the install, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • 7.0.1 Updater install problem

    Hi
    We are running CF MX 7.0.0.91690 on a MS Windows 2000 SP4
    Server, and am having problems installing the 7.0.1 Updater. A few
    seconds after double clicking on the Updater the install process
    stops with no error message. Has anyone else had the same issue?
    If not is there a manual method to install the 7.0.1 Updater?

    Hello,
    Please refer to this forum thread for further instructions.
    We are aware of this issue and trying to fix it.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=1&catid=2&threadid=12 13156

  • Software update install problem

    Hello, I read about the EFI update problems and did my research on other updates as well, however I didn't find answer to my problem. After Software update checked for new updates (and there was about ten of them, because I did't do any updates for the past moth), I downloaded them and when I chose instal, the program quit uexpectedly. I tried this several times, but got the same message every time. i would be very glad if you could help me ay way. Thaks in advance.

    Anyone got any ideas?

  • June 3 2013 update install problem

    I am having installation problems with the latest CS6 update released June 3 2013. I have tried multiple times to instal the update and the installer goes through most of the install process and then gives me a message saying  I should check the error log to identify the problem. The log shows this message "Adobe Photoshop 13.0.5 Installation failed. Error Code: U44M1P7". I have no idea what this means so it is no help. Anybody have any ideas. I am using a 3 year old MacBook Pro running the latest version of Mountain Lion.

    LCPhoto86 wrote:
    …that was a result of the fact that I used to have all my Apps organized into subfolders in my App folder…
    That is a monumentally bad idea.  It is guaranteed to give you grief sooner or later.
    Never change the default install location of an Adobe application, never move it, never change the name of any volume or folder in its path, and never, ever create sub-folders in which to hide them in a misguided attempt to "organize" things. 
    If you want to organize, use aliases somewhere else.  Also, that's what the Dock is there for on a Mac.

  • Iphoto 7.1.1 update install problem

    HI CAN ANYONE HELP
    SINCE I INSTALLED THE iphoto 7.1.1 update I CAN NO LONGER OPEN IPHOTO
    YOU CLICK ON THE APP IT BOUNCES ONCE AND NOTHING....
    HELP..

    Looks like some Framework iPhoto uses got messed up. Did you install the 10.4.11 update at the same time as you installed the 7.1.1 iPhoto update? There are a couple of things that you might need to do.
    1- Try re-installing iPhoto. To do that you need to delete the iPhoto Application from the Applications folder and then the iPhoto receipts located in Library/Receipts folder. Note: DO NOT delete the iPhoto Library. Then re-install iPhoto from the iLife DVD, then install the various updates until you bring the version up to 7.1.1. Try launching iPhoto again. If this works, you are back in business. If not
    2- You will need to re-install the 10.4.11 update. Since it will not show up in the Software Updater you will need to download the separate installer from the Apple website. http://www.apple.com/support/tiger/ just download the version appropriate for your machine and re-install.
    Let us know if any of these solutions took care of your problem.

  • Leopard Graphics Update install problem

    I've installed 10.5.2 fine, but when I attempt to install the graphics update and restart, it gives me the error "the installer could not install some files in "/". Contact the software provider" I've also tried the combo install, but that gives me the same error. anybody know what's going on here?

    Unless you are having problems, I wouldn't worry about it too much. There may be some problems with your setup, and I'm sure an 'erase & install' would cure it - though you might consider this a bit extreme at the moment.

  • HP 6500 Software Install Problem Scanner

    II use Op sys Win8.1.
    I have trîed installing, reinstalling, using the deinstall utility tool before reinstalling and all recommended actions and cannot get the scanning to work. I continually get the message     c\users\eric\appdata\local\temp\7zs4ffa\hpslpsvc64.dll
    Access is denied  evry 15 minutes whist the computer is the location with hp 6500
    A HP 6520 at another location work fine.
    Does anyone have a solution ?

    Hi @efktd, 
    I see by your post that you are unable to scan on the Windows 8.1. You keep getting the message "message c\users\eric\appdata\local\temp\7zs4ffa\hpslpsvc64.dll". I can help you with this.
    It is possible that it might be caused by file corruption or Admin rights.
    Change the folder options of the Admin users account settings to show all hidden files folder.
    Windows 7 & 8 - Show Hidden Files and Folders.
    To grant access to the folder, log into the one of the accounts where the pop up window occurs and navigate to that path, and double click on the folder. You will be prompted for the Admin users password to grant "permanent access to that folder". Click yes and the problem should be resolved for that account.
    If you are still having issues, then uninstall the software. Uninstalling the Printer Software.
    Perform a clean boot, turn of Microsoft Services and Startup programs. How to perform a clean boot in Windows.
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%.
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted.
    Then run the download so it extracts again to the temp folder. Close out the installation.
    Open the temp folder again.
    Open the folder starting with 7z. (Example: 7zS2356)
    Right click and run the setup with Administrative Rights.
    Test the printer and scanning.
    Go back and turn on the Microsoft Services and Startup programs.
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Muse update install problem, V.2.0, C-Cloud

    Mac 10.7.5 and newset Air.
    Any try to update does not work. After installation process there is an alert window saying that the file is damaged and the author should be contacted.
    This ir really frustrating. I hesitate to delete Muse before trying again. In the middle of a project I prefer to have the old version better than nothing. What to do?

    If you are upgrading from Muse 2.0, you will need to first uninstall and then do a fresh install of the latest version here: http://adobe.com/go/muse_latest_mac.
    This won't be a problem going forward.

  • ITunes 10.6.1 Update install problem

    I updated iTunes to 10.6.1 and now iTunes does not open. The agreement screen comes up when you try to open it and once you click "I Agree" you then get a pop up from windows saying the iTunes is not responding and that it needs to be shut down. I have reset the computer twice and tried downloading the update again. The 2nd download took like 1 second so I'm assuming iTunes recognized that the update had already been done.
    I know I could uninstall iTunes and start over but I will then loose playlists that are not backed up on other devices. Any tips or ideas. This is the 2nd iTunes update that has caused me problems. This suprises me because Apple always seems to have their poop in a group.
    Thanks for any help!!!

    Solved my own problem. Option-click the green button is now working, even though I tried numerous time before posting with no success!
    Also I've just seen the spell check "abc" above, but am wondering why this is no longer automatic?
    Andrew

  • Help!! 10.4.7/ software update/ install problem

    I am stuck on 10.4.7.
    Software update does not pick up any new software (10.4.8/ iTunes 7.0.1/ Quicktime 7.13 etc).
    When I try installing using the standalone installers, the software will not install with various error messages ("this volume does not meet the requirements for this update", "you are not allowed to install this software on this volume for an unknown reason").
    Using the "repair disk" feature booting off the cloned drive doesn't do anything.
    I cannot boot off the Tiger DVD or the Techtool deluxe CD (a "no entry" sign appears after a while).
    Trying to boot off a Tiger DVD image on the cloned firewire drive (using disk utility restore feature) doesn't work either.
    I can boot off the cloned drive, but again the software updates dont get installed with the same error messages.
    So I cant do an erase and install on the harddrive. All the software runs perfectly but without being able to do an erase and install, the computer will become unusable if things start playing up.
    Anyone got any ideas what is going on?
    isight imac   Mac OS X (10.4.7)  

    Anyone got any ideas?

Maybe you are looking for