8.1 sp2 very slow on AIX 5.2

Hi,
I am new to this so probably I am missing something simple, however I have read many manuals and can not figure out what is wrong with my setup.
For last few years we were using Apache as web server, everything worked great.
Now recently I installed Weblogic 8.1SP2 on same server AIX (5.2).
Weblogic is slow(takes few seconds to display page) while Apache takes no time, so I placed same sample file on each webserver to test download speed
My findings are as follows
     Download from Apache speed is average 800KB/sec
     Download from Weblogic speed is average 35KB/sec
It looks like Weblogic is much slower, test were done from same server and same workstation.
Sever is not busy at all. There is only one user connected to it, me. Using quest tool I see nothing wrong with Apache. Sever is not buys but download is very slow. I have tested some workstations as well and it appear all windows 2000 are slow accessing Weblogic webserver, but I found couple windows XP workstations that were having no problem downloading this file from Weblogic with average speed 800KB/sec.
Please let me know if you have any suggestion how to fix it
Where to look for a problem, is it workstation or webserver configuration issue.
Aix server itself has enough resources to run it.
Any suggestions are welcome. Thank you

Thank you for your response, I have traced today packets that are being exchanged between window2000 workstation and each of webservers. Base on my finding I see
Following pattern when downloading form Weblogic 8.1
source      dest      length     summary     time
WLS     workstation     1514     ACK     14.00.00.00
WLS     workstation     1514     ACK     14.00.00.00
workstation     WLS     66     ACK     14.00.00.00
WLS     workstation     1242     PSH ACK     14:00.00.00
workstation     WLS     66     ACK     14:00.00.160
WLS     workstation     1514     ACK     14:00.00.160
WLS     workstation     1514     ACK     14:00.00.160
workstation     WLS     66     ACK     14:00.00.160
WLS     workstation     1242     PSH ACK     14:00.00.160
workstation     WLS     66     ACK     14:00.00.300
WLS     workstation     1514     ACK     14:00.00.300
WLS     workstation     1514     ACK     14:00.00.300
workstation     WLS     66     ACK     14:00.00.300
WLS     workstation     1242     PSH ACK     14:00.00.300
workstation     WLS     66     ACK     14:00.00.480
but when tracing download from Apache I have
no delay download is very fast (~600 packes a sec)and pattern is
source     dest      length
WLS     workstation     1514     
WLS     workstation     1514     
workstation     WLS     66     
WLS     workstation     1514     
WLS     workstation     1514     
workstation     WLS     66     
So I see WLS sends 2 regular packets, workstation acknowledge then, than WLS sends only one packed of size 1242 and than does nothing,
Workstation waits ~200ms (as it should)and sends acknowledge to WLS and at that point WLS sends 2 reg packages and process repeat itself. I found how can I reduce this wait to ~100ms on workstation, but that is not solution for my problem. Does any one have any suggestions what is wrong here and how can I fix it on server or workstation level. Why WLS doesn't sends 2 packets each time.
Thank you,

Similar Messages

  • IBM JSSE SSL is very slow under AIX

    When I select the JSSE SSL implementation under AIX my WLS instance becomes very, very slow. Response times for simple user actions are ~26 sec. while the CPU is idle. I select the JSSE implemenation in the WLS Admin Console as follows:
    Environment > Servers > AdminServer > SSL > Advanced > Use JSSE SSL
    I configured WLS to use TLSv1 as described in:
    Client-cert atn fails under AIX
    My JDK is IBM J9 SR-9. I'm not able to reproduce this issue with the J9 SR-9 build for Win32.
    Is this a known issue under AIX? And is there any workaround available?
    Thanks in advance!
    Bas

    When I select the JSSE SSL implementation under AIX my WLS instance becomes very, very slow. Response times for simple user actions are ~26 sec. while the CPU is idle. I select the JSSE implemenation in the WLS Admin Console as follows:
    Environment > Servers > AdminServer > SSL > Advanced > Use JSSE SSL
    I configured WLS to use TLSv1 as described in:
    Client-cert atn fails under AIX
    My JDK is IBM J9 SR-9. I'm not able to reproduce this issue with the J9 SR-9 build for Win32.
    Is this a known issue under AIX? And is there any workaround available?
    Thanks in advance!
    Bas

  • Database performance is very slow

    Hi DBA's
    Plz help me out !!!
    Application users complaining database performance is very slow. Its an 10g DB in IBM AIx Server.
    Any changes needed pls be post as soon as possible
    Buffer Cache Hit Ratio 94.69
    Chained Row Ratio 0
    Database CPU Time Ratio 17.21
    Database Wait Time Ratio 82.78
    Dictionary Cache Hit Ratio 99.38
    Execute Parse Ratio -25.6
    Get Hit Ratio 70.62
    Latch Hit Ratio 99.65
    Library Cache Hit Ratio 99.43
    Parse CPU to Elapsed Ratio 8.4
    Pin Hit Ratio 81.6
    Soft-Parse Ratio 94.29
    =====================================
    NAME TYPE VALUE
    cursor_sharing string EXACT
    cursor_space_for_time boolean FALSE
    nls_currency string
    nls_dual_currency string
    nls_iso_currency string
    open_cursors integer 600
    optimizer_secure_view_merging boolean TRUE
    session_cached_cursors integer 20
    sql92_security boolean FALSE
    ===========================================================
    lock_sga boolean FALSE
    pre_page_sga boolean FALSE
    sga_max_size big integer 4272M
    sga_target big integer 4G
    pga_aggregate_target big integer 2980M
    Total Ram Size is 8 GB

    SQL> select username,sid from v$session where username='WPCPRODUSR';
    USERNAME SID
    WPCPRODUSR 378
    WPCPRODUSR 379
    WPCPRODUSR 380
    WPCPRODUSR 381
    WPCPRODUSR 382
    WPCPRODUSR 383
    WPCPRODUSR 384
    WPCPRODUSR 385
    WPCPRODUSR 386
    WPCPRODUSR 387
    WPCPRODUSR 388
    USERNAME SID
    WPCPRODUSR 389
    WPCPRODUSR 390
    WPCPRODUSR 391
    WPCPRODUSR 392
    WPCPRODUSR 393
    WPCPRODUSR 394
    WPCPRODUSR 395
    WPCPRODUSR 396
    WPCPRODUSR 397
    WPCPRODUSR 398
    WPCPRODUSR 399
    USERNAME SID
    WPCPRODUSR 400
    WPCPRODUSR 401
    WPCPRODUSR 402
    WPCPRODUSR 403
    WPCPRODUSR 404
    WPCPRODUSR 405
    WPCPRODUSR 406
    WPCPRODUSR 407
    WPCPRODUSR 408
    WPCPRODUSR 409
    WPCPRODUSR 410
    USERNAME SID
    WPCPRODUSR 411
    WPCPRODUSR 412
    WPCPRODUSR 413
    WPCPRODUSR 414
    WPCPRODUSR 415
    WPCPRODUSR 416
    WPCPRODUSR 417
    WPCPRODUSR 418
    WPCPRODUSR 419
    WPCPRODUSR 420
    WPCPRODUSR 421
    USERNAME SID
    WPCPRODUSR 422
    WPCPRODUSR 423
    WPCPRODUSR 424
    WPCPRODUSR 425
    WPCPRODUSR 426
    WPCPRODUSR 427
    WPCPRODUSR 428
    WPCPRODUSR 429
    WPCPRODUSR 430
    WPCPRODUSR 431
    WPCPRODUSR 432
    USERNAME SID
    WPCPRODUSR 433
    WPCPRODUSR 434
    WPCPRODUSR 435
    WPCPRODUSR 436
    WPCPRODUSR 437
    WPCPRODUSR 438
    WPCPRODUSR 439
    WPCPRODUSR 440
    WPCPRODUSR 441
    WPCPRODUSR 442
    WPCPRODUSR 443
    USERNAME SID
    WPCPRODUSR 444
    WPCPRODUSR 445
    WPCPRODUSR 446
    WPCPRODUSR 447
    WPCPRODUSR 448
    WPCPRODUSR 449
    WPCPRODUSR 450
    WPCPRODUSR 451
    WPCPRODUSR 452
    WPCPRODUSR 453
    WPCPRODUSR 454
    USERNAME SID
    WPCPRODUSR 455
    WPCPRODUSR 456
    WPCPRODUSR 457
    WPCPRODUSR 458
    WPCPRODUSR 459
    WPCPRODUSR 460
    WPCPRODUSR 461
    WPCPRODUSR 462
    WPCPRODUSR 463
    WPCPRODUSR 464
    WPCPRODUSR 465
    USERNAME SID
    WPCPRODUSR 466
    WPCPRODUSR 467
    WPCPRODUSR 468
    WPCPRODUSR 469
    WPCPRODUSR 470
    WPCPRODUSR 471
    WPCPRODUSR 472
    WPCPRODUSR 473
    WPCPRODUSR 474
    WPCPRODUSR 475
    WPCPRODUSR 476
    USERNAME SID
    WPCPRODUSR 477
    WPCPRODUSR 478
    WPCPRODUSR 479
    WPCPRODUSR 480
    WPCPRODUSR 481
    WPCPRODUSR 482
    WPCPRODUSR 483
    WPCPRODUSR 484
    WPCPRODUSR 485
    WPCPRODUSR 486
    WPCPRODUSR 487
    USERNAME SID
    WPCPRODUSR 488
    WPCPRODUSR 489
    WPCPRODUSR 490
    WPCPRODUSR 491
    WPCPRODUSR 492
    WPCPRODUSR 493
    WPCPRODUSR 494
    WPCPRODUSR 495
    WPCPRODUSR 496
    WPCPRODUSR 497
    WPCPRODUSR 498
    USERNAME SID
    WPCPRODUSR 499
    WPCPRODUSR 500
    WPCPRODUSR 501
    WPCPRODUSR 502
    WPCPRODUSR 503
    WPCPRODUSR 504
    WPCPRODUSR 505
    WPCPRODUSR 506
    WPCPRODUSR 507
    WPCPRODUSR 508
    WPCPRODUSR 509
    USERNAME SID
    WPCPRODUSR 510
    WPCPRODUSR 511
    WPCPRODUSR 512
    WPCPRODUSR 513
    WPCPRODUSR 514
    WPCPRODUSR 515
    WPCPRODUSR 516
    WPCPRODUSR 517
    WPCPRODUSR 518
    WPCPRODUSR 519
    WPCPRODUSR 520
    USERNAME SID
    WPCPRODUSR 521
    WPCPRODUSR 522
    WPCPRODUSR 523
    WPCPRODUSR 524
    WPCPRODUSR 525
    148 rows selected.

  • WebAnalysis/WebAdminServicesConsole very slow (because of java applet)

    Hello,
    Context: Hyperion System 9.3.1
    server1, Windows -> installed Administration Services e BI+ (Workspace, Web Analysis ecc)
    server2, AIX -> installed Essbase
    The client has externalized the software/hardware so we have:
    network A =client's network
    network B = Internet Service provider network
    network C =network of the society to which client has externalized the hardware
    The communication path is: network A -> network B -> network C
    server1 and server2 are on network C.
    From the client's computers in network A, Web Analysis Studio and Web Administration Services Console (both using java applets)
    have very very slow response times. To give you an idea, an blank report in Web Analysis needs 10min to open. With Web Admin Console I can't do anything: in an empty outline, I added 2 dimensions with 1 member each, when I tried 'Save outline' after 20mins of waiting a response the system also freezed.
    When I work in remote control directly on server1, Web Analysis studio and Web Admin Console are very very fast.
    This happens only with these two components, the other web components not using java applet (Workspace ecc) don't have this problem.
    That made me think there is a network issue. But ping and tracert to both servers (1,2) from the client machines gave me positive results.
    I don't know what else to test/try.
    Any help will be appreciated!
    Thank you!
    Daniela

    Ciao,
    It seems Web Analysis works well only with jre 1.5.0 update 11. I had java 1.6.0 update 4. I had disintalled java 1.6.0_4, installed 1.5.0_11 and now web analysis applet won't even load.
    The java console makes me see the following messages (I replaced by hand the real server name with the server_name):
    Java Plug-in 1.5.0_11
    Uso della versione JRE 1.5.0_11 Java HotSpot(TM) Client VM
    Directory principale utente = C:\Documents and Settings\Administrator
    c: cancella finestra console
    f: finalizza oggetti nella coda di finalizzazione
    g: recupera spazio
    h: visualizza questo messaggio di aiuto
    l: esegui dump dell'elenco classloader
    m: stampa utilizzo memoria
    o: attiva registrazione eventi
    p: ricarica configurazione proxy
    q: nascondi console
    r: ricarica configurazione criteri
    s: esegui dump delle proprietà del sistema e dell'installazione
    t: esegui dump dell'elenco thread
    v: esegui dump dello stack del thread
    x: cancella cache classloader
    0-5: imposta livello di traccia su <n>
    [WARN] HYABaseClient - -Analyzer Client Version=9.3.1.0.0.248
    [WARN] HYABaseClient - -ServerURL=http://server_name/WebAnalysis/processor
    [INFO] ProxyHttpClientHelper - -[PROXY_INIT] - Detect proxy settings using JavaPlugin Proxy Service...
    [INFO] ProxyHttpClientHelper - -[PROXY_INIT] - Proxy settings missed or bypassed. Go to sever directly
    [INFO] ProxyHttpClientHelper - -[PROXY_INIT] - Proxy settings are detected successfully.
    java.net.UnknownHostException: server_name
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
         at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
         at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
         at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
         at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
         at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
         at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
         at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.checkProxySettings(HttpRequestProcessor.java:269)
         at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.checkProxySettings(HttpRequestProcessor.java:234)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.obtainProxySettings(Unknown Source)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    [WARN] HYABaseClient - -Using Config: config_client.xml
    [INFO] SessionScopeBindingToJVM - -Releasing services for session: Unbound/Undefined SessionId
    [ERROR] ServiceManager - -Creating dummy lock.
    [INFO] SessionScopeBindingToJVM - -Creating token for session: INITIALIZATION
    [INFO] HttpRequestProcessor - -ServerURL=http://server_name/WebAnalysis/processor
    [INFO] HttpRequestProcessor - -Connect to server DIRECTLY
    [INFO] EventHandlerAsynchronous - -Created 3 worker threads.
    [ERROR] NamingServiceProxy - -Could not retrieve root entry. <org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.>org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
         at com.hyperion.atf.services.distributed.clientproxies.NamingServiceProxy.getRootEntry(NamingServiceProxy.java:1008)
         at com.hyperion.atf.internal.services.naming.NamingServiceProxy.getRootEntry(NamingServiceProxy.java:119)
         at com.hyperion.atf.internal.services.naming.NamingServiceProxy.initialize(NamingServiceProxy.java:102)
         at com.hyperion.atf.internal.services.containers.UserSessionContainer.initialize(UserSessionContainer.java:119)
         at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:526)
         at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:271)
         at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:503)
         at com.hyperion.atf.services.ServiceManager.initServiceContainer(ServiceManager.java:463)
         at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:661)
         at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
         at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:480)
         at com.hyperion.atf.services.distributed.DistributedRequestProcessorClient.process(DistributedRequestProcessorClient.java:115)
         at com.hyperion.atf.services.distributed.clientproxies.NamingServiceProxy.getRootEntry(NamingServiceProxy.java:999)
         ... 13 more
    Caused by: java.net.UnknownHostException: server_name
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
         at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
         at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
         at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(Unknown Source)
         at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
         at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
         at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
         at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
         at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:466)
         ... 15 more
    [ERROR] UserSessionContainer - -java.lang.IllegalStateException: Root entry is null
    [ERROR] UserSessionContainer - -Could not destroy container instance properly "com.hyperion.atf.internal.services.naming.NamingServiceProxy". <java.lang.NullPointerException>java.lang.NullPointerException
         at com.hyperion.atf.internal.services.containers.UserSessionContainer.destroy(UserSessionContainer.java:336)
         at com.hyperion.atf.internal.services.containers.UserSessionContainer.initialize(UserSessionContainer.java:127)
         at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:526)
         at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:271)
         at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:503)
         at com.hyperion.atf.services.ServiceManager.initServiceContainer(ServiceManager.java:463)
         at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:661)
         at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    [ERROR] ServiceManager - --------------------------
    [ERROR] ServiceManager - -Service "naming" was not initialized. Removed from registry.
    [ERROR] ServiceManager - -java.lang.IllegalStateException: Could not initalize container for: ServiceRegistration (name=naming, scope=user_session, priority=99, class=com.hyperion.atf.internal.services.naming.NamingServiceProxy, cronned=null)
    [ERROR] ServiceManager - --------------------------
    [INFO] SessionScopeBindingToJVM - -Releasing services for session: INITIALIZATION
    [WARN] SecurityContextManagerProxy - -Could not verify login...will try again. <org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.>org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
         at com.hyperion.atf.services.distributed.clientproxies.SecurityContextManagerProxy.hasValidSecurityContext(SecurityContextManagerProxy.java:286)
         at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.refresh(SecurityContextManagerProxy.java:73)
         at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.hasValidSecurityContext(SecurityContextManagerProxy.java:162)
         at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.getUser(SecurityContextManagerProxy.java:149)
         at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.toString(SecurityContextManagerProxy.java:195)
         at java.lang.String.valueOf(Unknown Source)
         at java.lang.StringBuffer.append(Unknown Source)
         at com.hyperion.atf.internal.services.containers.UserSessionContainer.internalRelease(UserSessionContainer.java:259)
         at com.hyperion.atf.internal.services.containers.UserSessionContainer.release(UserSessionContainer.java:219)
         at com.hyperion.atf.internal.services.containers.UserSessionContainer.release(UserSessionContainer.java:229)
         at com.hyperion.atf.services.ServiceManager.releaseServices(ServiceManager.java:354)
         at com.hyperion.atf.services.SessionScopeBindingToJVM.destroy(SessionScopeBindingToJVM.java:34)
         at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:682)
         at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
         at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:480)
         at com.hyperion.atf.services.distributed.DistributedRequestProcessorClient.process(DistributedRequestProcessorClient.java:115)
         at com.hyperion.atf.services.distributed.clientproxies.SecurityContextManagerProxy.hasValidSecurityContext(SecurityContextManagerProxy.java:277)
         ... 17 more
    Caused by: java.net.UnknownHostException: server_name
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
         at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
         at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
         at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(Unknown Source)
         at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
         at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
         at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
         at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
         at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:466)
         ... 19 more
    [ERROR] HYABaseClient - -Error while initializing ATF <com.hyperion.atf.services.InitializationException: Could not initialize service manager: 1224512931093>com.hyperion.atf.services.InitializationException: Could not initialize service manager: 1224512931093
         at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:678)
         at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: com.hyperion.atf.services.ServiceManager$ServiceRecursiveInitException: Could not start critical service: "appinit.tasks", all services are being rolled back.
         at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:546)
         at com.hyperion.atf.services.ServiceManager.initServiceContainer(ServiceManager.java:463)
         at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:661)
         ... 5 more
    org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
         at com.hyperion.analyzer.atf.service.clientproxies.HYALicensingServiceProxy.isFeatureEnabled(Unknown Source)
         at com.hyperion.analyzer.usersession_base.AnalyzerClient.initShowHideParams(Unknown Source)
         at com.hyperion.analyzer.usersession_base.AnalyzerClient.createGUI(Unknown Source)
         at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
         at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:480)
         at com.hyperion.atf.services.distributed.DistributedRequestProcessorClient.process(DistributedRequestProcessorClient.java:115)
         ... 6 more
    Caused by: java.net.UnknownHostException: server_name
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
         at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
         at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
         at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(Unknown Source)
         at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
         at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
         at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
         at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
         at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:466)
         ... 7 more
    Any help will be appreciated!

  • Adobe Reader 11.0.37 - very slow printing

    Hello, i installed version 11.0.37 on windows server 2003  ( SP2 ) and my print performance is very slow ( only pdf files ) - previous a had Adobe Reader 9 and everything works fine. I use Citrix. Users are connected directly to the xenapp servers , and print performance is very slow ( takes 2 or more minuts until printing starts )

    Hi, yesterday i installed update 11.0.5....it did not help any other ideas ?

  • PSE9 Organizer is very slow

    The organizer is very slow and take over a minute just to page from one screen to another.  I took off facial recognition but that only helped minimally.  Is this an improvement?  Previously used PSE 6 which worked fine.
    This is test of the trail version on a Vista SP2 Intel 2.66GHz Core 2 Duo with 2GB of memory

    After a couple of days of testing I've decided to pass on PSE9 :-
    Don't like the Organiser color - the light grey is far to light and don't like the grid around the photos
    The font for filename, tag name etc is far too small
    The organiser performance is slower than PSE7 - doesn't render photos instantly like PSE7, things like adding tags and anything done on multiple items seems to be slower in PSE9 than PSE7.
    Yes the new features are OK - but I cannot work with PSE9 so I'm passing on it.

  • Very slow day

    Hi all,
    11.2.0.1
    Aix 6.1
    Yesterday Jan 15, 2014, we experienced very slow performance in our App. The webpage is hanging or disconnecting often and many transaction were dropped or not processed.
    My boss told me to investigate the issue and find the cause. Again this topic is the most unmastered part of my carrier as dba.
    There is no solid way I have found for a template for a clear solution. I have gathered 1 week worth of AWR stats reports just to campare baselines because that is what is always heard here.
    Given a week awr statistics can you help me how to identify the cause of performance problem yesterday?
    https://app.box.com/s/dna3i7auq1mel6gl1c4v
    https://app.box.com/s/mumevcqqgu5c0b1mal4o
    https://app.box.com/s/f24z3caboyknfyxhhcaj
    https://app.box.com/s/xas3ra0qz081jp1ynso5
    https://app.box.com/s/1ftb87kd2relqzzl9mnm
    https://app.box.com/s/qqthfm6vpwdc3o5t1dfr
    Kindly open report in notepad++ as this is in 500 linesize.
    Thanks a lot,
    pK

    I already mentioned the db & OS version above
    The application is just 3rd party developed in java.
    Yes - but that is just one SMALL part of the info mentioned in that link about how to ask a question. Go back and read it again - especially the part about the info needed for a tuning request.
    You also aren't responding to the questions or suggestions others have already posted. Alvaro posted this:
    These logs you have provided are completely unformated and next to impossible to read. Why not just post the AWR HTML parts that are interesting? Such as: Time model, Top 5 Waits, Load profile.
    Also, a one week AWR report is not very useful in your case. Focus on an AWR derived from the snapshots that make up the period the problem occurred.
    The only comment you made was a sarcastic one about the formatting.
    Why didn't you comment about the AWR suggestion that was made? If you want responders to help you have to be responsive to their comments. They are trying to help you.
    You also never responded to the reply by Gayu0726:
    To solve:
    Identify the tables which read most.
    Create index for the tables.
    If index is already there, try to analyze it and gather statistics.
    Check whether the index are in usable form.
    You marked the reply 'helpful' but never said a word about whether you did those things and what the result was.
    Himmy got the same treatment:
    If this is an OLTP database can you try gathering stats on all tables of schemas used by the application.
    Did you do that? Are the stats current? Why didn't you respond to let us know WHAT you are doing to solve the problem?
    In short you seem to be relying on us to solve your problem and haven't provided ANY feedback about what, if anything, you are doing to solve it:
    Yesterday Jan 15, 2014, we experienced very slow performance in our App. The webpage is hanging or disconnecting often and many transaction were dropped or not processed.
    That's a good start to defining the problem.
    My boss told me to investigate the issue and find the cause. Again this topic is the most unmastered part of my carrier as dba.
    And it will likely continue to be 'unmastered' until you actually press the keyboard with your fingers and start doing things yourself.
    There is no solid way I have found for a template for a clear solution.
    If you 'experienced very slow performance' then, by definition, you MUST know that previously the performance was 'faster'.
    That means that SOMETHING changed. The 'template' you seek is to determine WHAT CHANGED.
    I have gathered 1 week worth of AWR stats reports just to campare baselines because that is what is always heard here.
    Ok - so did you actually COMPARE the base lines to see what was different? What did you find was different? Why haven't you posted here and told us what you found that was different?
    You have to use a process just like in those picture games for kids where they show two pictures and ask them: find the objects in the two pictures that are different.
    Picture #1 - fast performance
    Picutre #2 - slow performance
    1. What changed between picture #1 and picture #2?
    2. Did the amount of data in the tables (which you haven't told us anything about) change?
    3. Did the statistics change? Or perhaps no one updated them lately?
    4. Did the execution plans of any of the key queries change?
    5. and so on, and so on
    If you don't have picture #1 you will have a hard time comparing picture #2 to anything.
    It is YOUR responsibility to post the information needed to help you. Post the info re stats, tables, execution plans, etc.

  • JDeveloper 10.1.3.1 is very slow, how to make it faster ?

    Hi all,
    I am using JDeveloper 10.1.3.1, on AMD Athlon 64 2800+, 1 GB RAM, Windows XP SP2.
    As our pages grows, now it is very slow to add new page or navigation case on the faces-config.xml.
    Yes, we can use the overview tab of the faces-config to work faster, but I see the drawing is not good if we let JDev to draw the line.
    Is there any workaround to make our JDev faster ?
    Thank you for your help,
    xtanto

    Hi Xtanto,
    What I mean is that I use multiple faces-config files. One of them is just for my manged beans that I use in a menu model for my af:Page. In that faces-config, there are no navigation cases, just managed beans. Since the faces-config diagram view shows only navigation cases, the diagram is not useful for such faces-config's (the diagram is blank). In any case, I never use the diagram view, even for my faces-config's with the navigation cases. I just find it easier to use the "overview" view, or the XML source instead.
    Hope this is clearer.
    John

  • Very very slow file access iSCSI NSS on SLES11/XEN/OES11

    Hi,
    Like many Novell customers while carrying out a hardware refresh we are moving off traditional Netware 6.5 to OES11 and at the same time virtualising our environment.
    We have new Dell Poweredge 620 serves attached by 10gig iSCSI to Equalogic SAN
    Installed SLES will all patches and updates and XEN and then created OES11 SP2 virtual machines, these connect to NSS volume by iSCSI
    Migrated files from traditional netware server to new hardware and stated testing and ran into very very slow files access times
    A 3.5mb pdf file takes close to 10 minutes to open from local PC with Novell Client installed, same if no client and open via cifs. Opening same file off traditional NW6.5 server takes 3-4 seconds.
    We have had a case open with Novell for almost 2 months but they are unable to resolve.
    To test other options we installed VMWare ESXi on the internal usb flash drive and booted off that, created same OES11 VM and connected to NSS on SAN and same pdf open in seconds.
    The current stack of SLES11/XEN/OES11 is not able to be put into production
    Any ideas where the bottleneck might be? We think is in XEN.
    Thanks

    Originally Posted by idgandrewg
    Waiting for support to tell me what the implications are of this finding and best way to fix
    Hi,
    As also mentioned in the SUSE forums, there is the option of using the Equallogic Hit Kit. One of the tools, next to the great autoconfigure options it has, is the eqltune tool.
    Some of the stuff that I've found important:
    -gro is known read performance killer. Switch if off on the iSCSI interfaces.
    - if possible (meaning you have decent hardware), disable flowcontrol as this generally offers stability but at the cost of performance. If your hardware is decent, this form of traffic control should not be needed.
    -To have multipath work correctly over iSCSI and starting SLES 11 SP1. Make sure kernel routing and arp handling are set correctly (not directly relevant if you only have 1 10 GB link):
    net.ipv4.conf.[iSCSI interfaceX name].arp_ignore = 1
    net.ipv4.conf.[iSCSI interfaceX name].arp_announce = 2
    net.ipv4.conf.[iSCSI interfaceX name].rp_filter = 2
    Test if traffic is actively routed over both iSCSI interfaces:
    ping -I [iSCSI interfaceX name] [iSCSI Group IP EQL]
    -Make sure network buffers etc are adequately set as recommended by Dell (set in /etc/sysctl.conf):
    #NetEyes Increase network buffer sizes for iSCSI
    net.core.rmem_max = 16777216
    net.core.wmem_max = 16777216
    net.ipv4.tcp_rmem = 8192 87380 16777216
    net.ipv4.tcp_wmem = 4096 65536 16777216
    net.core.wmem_default = 262144
    net.core.rmem_default = 262144
    -Settings for the /etc/iscsi/iscsid.conf I'm using:
    node.startup = automatic # <--- review and set according to environment
    node.session.timeo.replacement_timeout = 60
    node.conn[0].timeo.login_timeout = 15
    node.conn[0].timeo.logout_timeout = 15
    node.conn[0].timeo.noop_out_interval = 5
    node.conn[0].timeo.noop_out_timeout = 5
    node.session.err_timeo.abort_timeout = 15
    node.session.err_timeo.lu_reset_timeout = 20 #Default is 30
    node.session.err_timeo.tgt_reset_timeout=20 #Default is 30
    node.session.initial_login_retry_max = 12 # Default is 4
    node.session.cmds_max = 1024 #< --- Default is 128
    node.session.queue_depth = 128 #< --- Default is 32
    node.session.iscsi.InitialR2T = No
    node.session.iscsi.ImmediateData = Yes
    node.session.iscsi.FirstBurstLength = 262144
    node.session.iscsi.MaxBurstLength = 16776192
    node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072 #A lower value improves latency at the cost of higher IO throughput
    discovery.sendtargets.iscsi.MaxRecvDataSegmentLeng th = 32768
    node.session.iscsi.FastAbort = No # < --- default is Yes
    -Have Jumbo frames configured on the iSCSI interfaces & iSCSI switch.
    If you are using multipathd instead of the dm-switch provided with the Equallogic Hit kit, make sure the /etc/multipath.conf holds the optimal settings for the Equallogic arrays.
    Ever since Xen with SLES 11 SP1 we have been seeing strong performing virtual servers. We still use 1GB connections (two 1GB connections for each server, serving upto 180~190Mb/s).
    There could be a difference with the 10GB setup, where multipath is not really needed or used (depending on the scale of your setup). One important thing is that the iSCSI switches are doing their thing correctly. But seeing you've already found better results tuning network parameters on the Xen host, seems to indicate that's ok.
    Cheers,
    Willem

  • Export very slow

    Exporting photos as JPG at 300 pixels per inch has become very slow.
    I using Lightroom V1.1, Windows XP home SP2, P4 3GHz, 1GB ram, 300 GB SATA with 115 GB free.
    It has taken 1 hour to export 130 JPG files converted from a 6.1 mega pixel camera raw file. I think it use to be much faster. My library contains 12266 photos (JPG, TIFF, and Raw).
    I've recently added more disks to my computer. I'm looking into disk defragmentation and anti-virus software to see if these are contributing to the problem. I'm using McAfee Virus Scan and anti-spy ware 8.5i (enterprise).
    Also note that my export directory is a sub-directory of my main photo directory which is c:\photos.
    I also check some previous exports from earlier this year. It took 10 minutes to export 112 photos similar in nature (raw to jpg).
    Any help would be greatly appreciated.
    Bryan

    Exporting photos as JPG at 300 pixels per inch has become very slow.
    I using Lightroom V1.1, Windows XP home SP2, P4 3GHz, 1GB ram, 300 GB SATA with 115 GB free.
    It has taken 1 hour to export 130 JPG files converted from a 6.1 mega pixel camera raw file. I think it use to be much faster. My library contains 12266 photos (JPG, TIFF, and Raw).
    I've recently added more disks to my computer. I'm looking into disk defragmentation and anti-virus software to see if these are contributing to the problem. I'm using McAfee Virus Scan and anti-spy ware 8.5i (enterprise).
    Also note that my export directory is a sub-directory of my main photo directory which is c:\photos.
    I also check some previous exports from earlier this year. It took 10 minutes to export 112 photos similar in nature (raw to jpg).
    Any help would be greatly appreciated.
    Bryan

  • Exchange 2013 - outlook in LAN environment very slow upload but fast download - not using 'use cached exchange mode'

    Hi,
    I have Exchange 2013 setup in a new environment (no migration) and it is working great except I just realized there is a big problem.
    I notice the following
    Problem 1:
    Outlook 2010 with sp2 with cached exchange mode on: when I import the pst into outlook, it imports fine but the sync is extremely slow. It uploads to the Exchange 2013 mail server at 20-70KB/sec (bytes) via LAN.
    Problem 2:
    Outlook 2010 with sp2 with cached exchange mode off: when I import the pst into outlook, it imports extremely slow. It uploads to the Exchange 2013 mail server at 20-70KB/sec (bytes) via LAN.
    More info:
    -user1 has 1GB of mail and when setting up the user on a new pc with outlook with cached exchange mode on, it downloads the mail very fast. It downloads at 40-80 Mbps/sec (bits).
    -I have Exchange 2013 with CU3 with win2k12 non r2.
    Why is the download so fast from Exchange 2013 but the upload to Exchange 2013 is extremely slow? How do I fix this?
    Thanks

    I did some more testing.
    I setup a test environment with:
    -Exchange 2013 SP1 on win2k12 r2
    -Outlook 2010 SP2 on windows 7 sp1
    -Outlook 2010 SP2 on windows 8.1
    -Outlook 2013 SP1 on windows 8.1
    Both windows 7 and windows 8.1 have the very slow upload issue to Exchange 2013. Windows 7 upload to Exchange 2013 is around 20-70KB/sec (bytes) via LAN. Windows 8.1 upload is a bit more responsive at around 500-600KB/sec (bytes) via LAN.
    I changed the TcpAckFrequency to 1 for windows 7 and 8.1 and the problem went away. The upload on both Windows 7 and 8.1 was going at megabytes after the change.
    I hope Microsoft fixes this soon.
    PowerShell script to have this automated via GPO:
    http://community.spiceworks.com/topic/571571-outlook-slow-after-migrating-to-exchange-2013
    PowerShell Script:
    $strGUIDS=[array](Get-WmiObject win32_networkadapter -filter "netconnectionstatus = 2" | select -expand GUID)
    foreach ($strGUID in $strGUIDS) {New-ItemProperty -path HKLM:\System\CurrentControlSet\services\Tcpip\Parameters\Interfaces\$strGUID -propertytype DWORD -name TcpAckFrequency -value 1}

  • Coveflow very slow with Windows Vista

    Salut à tous
    Avant je n'ai jamais eu de probleme avec Itunes mais après un formatage et avoir remis mes chansons, les coveflows étaient rapide.
    Mais maintenant c'est lent pourtant mon pc est très puissant donc ca ne peux pas venir de la
    que faire ?
    Hello everybody
    Before I never had problem with Itunes and coverflow had perfect but after a formatting and to have given my songs, the coveflows are very slow
    my PC is very powerful and that cannot come from
    what to make?
    hanks

    The Windows SP2 pre installed is the problem... I have an Equiumn A60, when I bought I noticed it takes too much time to load the windows xp.. so I formatted the hard disk and I've installed the Windows XP professional SP1, now it's two times faster to load and operate than before...
    Try to install another windows, professional and SP1 You'll see the diference, and do not worry about the drivers , the windows installs all the drivers itself...
    sorry for my english guys
    [Edited by: admin]

  • Equium A60 very slow with Windows XP SP 2

    This Toshiba unit boots very very slow it takes ages to getit booted yes got a software firewall installed but it can't be correct that it takes really ages to boot a laptop like this one. I have searced here for some updates but I have not really found anything. Is there any known issue with windows xp and sp 2 for this laptop?
    Do you have any adviecs?
    Regards
    Matts

    The Windows SP2 pre installed is the problem... I have an Equiumn A60, when I bought I noticed it takes too much time to load the windows xp.. so I formatted the hard disk and I've installed the Windows XP professional SP1, now it's two times faster to load and operate than before...
    Try to install another windows, professional and SP1 You'll see the diference, and do not worry about the drivers , the windows installs all the drivers itself...
    sorry for my english guys
    [Edited by: admin]

  • Portal very slow?

    I have installed Oracle8i, Oracle9iAS and Portal on the same PC(standalone)
    It is a P3-700Mhz - 128 MB
    When i'm developping Portal Applications, it is very slow.
    Should i upgrade the memory to 256 MB?
    Will it make a greate difference?

    I've installed and run Portal on Linux, Windows NT, Windows 2000 and Solaris and AIX on multiple types and sizes of systems. The smallest of which is a PII 233 with 384Megs of RAM. In this case, I am the only one developing on the machine so there's no contention, but it performs well considering...
    Make sure you size the instance correctly. Modifying memory parameters can make a big difference. At least is has in my experience. Get your DBA to take a look at the memory consumption and the SGA parameters.

  • My MAC is running very slow and i am a complete novice and don't know what to do. i have had my Mac since 2008 and its probably in a mess. if you can help i would be grateful. EtreCheck version: 1.9.15 (52) Report generated 8 September 2014 09:09:26

    My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in  mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
    EtreCheck version: 1.9.15 (52)
    Report generated 8 September 2014 09:09:26 BST
    Hardware Information: ?
      iMac (20-inch, Early 2008) (Verified)
      iMac - model: iMac8,1
      1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
      2 GB RAM
    Video Information: ?
      ATI Radeon HD 2600 Pro - VRAM: 256 MB
      iMac 1680 x 1050
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
    Disk Information: ?
      Hitachi HDP725032GLA380 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information: ?
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Bose Corporation Bose USB Audio
      Apple Computer, Inc. IR Receiver
    Gatekeeper: ?
      Mac App Store and identified developers
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
      [loaded] net.sourceforge.MonolingualHelper.plist Support
    Launch Agents: ?
      [running] com.trusteer.rapport.rapportd.plist Support
    User Login Items: ?
      iTunesHelper
    Internet Plug-ins: ?
      Google Earth Web Plug-in: Version: 5.1 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
      iPhotoPhotocast: Version: 7.0
      QuickTime Plugin: Version: 7.7.3
      eMusicRemote: Version: (null) Support
      eMusic: Version: Unknown
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Flip4Mac WMV  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ?
      Time Machine not configured!
    Top Processes by CPU: ?
          2% iTunes
          2% WindowServer
          0% coreaudiod
          0% fontd
          0% rapportd
    Top Processes by Memory: ?
      178 MB Finder
      133 MB com.apple.WebKit.WebContent
      109 MB iTunes
      92 MB Safari
      63 MB com.apple.quicklook.satellite
    Virtual Memory Information: ?
      24 MB Free RAM
      821 MB Active RAM
      807 MB Inactive RAM
      291 MB Wired RAM
      338 MB Page-ins
      680 KB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for

  • Not getting the associated buisness object in web ui

    Hi all , I have created  a workflow which send an user decision as workitem in crm web ui . But when i m executing the buisness object , i m not able to see the associated buisness object . Can anyone  tell me  do i need any customizing in SPRO  to b

  • Help with two computers, two accounts on one apple tv

    I'm about ready to pull the trigger on an apple tv to add to my building home theater system. My biggest desire in getting the apple tv is mainly for music streaming to my speaker system. So here is my question. My wife and I both have our own separa

  • Select option for a character type field

    Hi all as per my requirement i have a selection for a data type char40 Hence in my wddoinit method i used the following code to generate the select options in WD create a range table that consists of this new data element   LT_RANGE_TABLE = WD_THIS->

  • Blackberry Z10 Software update 10.1.0.273

    Hi.. I got a message for the update of my blackberry Z10 software to 10.1.0.273... When I read review of it, I got mixed response... Lots of people are complaining for: 1- Not able to send SMS 2- Battery draining very quickly 3- Phone getting heated

  • Entering special language characters in JSF

    I am using JDeveloper 10.1.3.3 to develop a JSF/ADF application. My database is using the AL32UTF8 character set. If the following is entered into an af:inputText field.... Podmiotowi w 2 okresie leczenia proszę ... when the record is saved it change