9iAS Rel2 OID starts but stops automatically seconds later

I just installed 9iASv2 on my Suse 8 Linux system.
After restarting, I attempted to start OID.
oidmon connect=iasdb start
<Message indicating start successful>
oidctl connect=iasdb server=oidldapd configset=0 instance=1 start
<nothing>
But, I couldn't continue with the start of the Infrastructure
I checked oidmon.log. And found this:
2002/06/20:15:30:59Updating Process Table...
2002/06/20:15:30:59Starting OIDLDAPD Server, PID=6496
2002/06/20:15:30:59Exec of OIDLDAPD Server failed with error=2
2002/06/20:15:30:59OIDLDAPD Instance 1 added into registry
2002/06/20:15:30:59Updating Process Table...
2002/06/20:15:31:09OIDLDAPD server terminated normally
2002/06/20:15:31:09Check log file oidldapd01.log
2002/06/20:15:31:09Deleting OIDLDAPD instance 1 from Process table
2002/06/20:15:31:09OIDLDAPD Instance 1 deleted from registry
It looks like oidldapd starts, then immediately fails, any idea?
thanks.

I had the same problem with my Solaris 8 install. The fix for me was to reinstall the infrastructure using an UTF8 database character set. After the reinstall, the patches went on with no problem at all.

Similar Messages

Hi my friend gave me his old Iphone 1 today and its stuck in the apple boot logo. Sometimes it automatically shuts off but about a second later it comes back on. The home button and the power button seem to not be responsive. Im hoping to restore it.. Thx

Hi my friend gave me his iphone 1 today and its stuck at the apple boot logo. Some times it automatically shuts off but about a second later is comes back on. The home button and the power button seem to not be responsive. Thanks for the help.

You bought a used iPhone. Amazon is not an authorized supplier of iPhones, nor are any of the 3rd parties that sell iPhones there.
You can make an appointment at the genius bar and have it looked at.
If you are very very lucky, it is still under warranty and it wasn't opened or otherwise tampered with before you bought it. In which case, Apple will replace it under warranty.
If it's not under warranty, they will replace it for $199.
If it has been opened or tampered with, they won't touch it.

HT1529 I have problems to empty the bin. It starts but stops almost immediately

I havwe an Imac and experience problems in emptying the trash bin.
It starts but immediately stops again. What can I do. I actually have 4000 iems in the trash bin

I have been following the instructions but Youtube still has the same problem.
It starts for a few seconds, then the screen gets bigger and it stops showing the
pictures...

Windows service start and stop automatically

i'm trying to start windows service, which i installed via running beasvc with parameters. everything used to work fine, but yesterday somthing broke up: i press the start button in the control panel, service tries to start, but then it stops and the following message appears: "Weblogic 9.0 Workspace Service service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service." sometimes it stops right after starting without giving any messages.
any ideas what's wrong with it&

If I run from a cmd box it shows a successful start, however when I look at the services through the MMC it is not started. Basically, it starts successfully and then immediately shuts off stating the message in the original post. This is after and only after I apply sp7 for BEA 7. If I roll the server back to just v 7, I don't have a problem. I have downloaded V7 twice, and I get the same result. I have followed the install instructions to a T and still the same result. I have also tested removing the user created pages, and I get the same exact error telling me either it's a generic error or, SP7 has issues. The only reason we are rolling to SP7 is because of a security issue, but for the time being we have locked down the firewall. Any other suggestions? I have had my Maximo Administrator contact BEA, and MRO about this problem (Maximo is the only system we use web logic for) and they default to the answer that it is a java issue. That V7 is not supported above java 1.3.xxx which is bull because we were running version 1.4, due to a security issue with JVM 1.3 and all worked well. I have replicated the install with JVM 1.3xxx for BEA 7 sp 7, and that did not solve the problem either. Sorry for the long post I just wanted to try to get all the info out.
Thank you for you time and consideration
Tanner

JBoss Starts but Stops Immediately

All
I am trying to do a turnkey installation of LiveCycle 8.2.1 with JBoss yet when I run the Configuration Manager, and at the point at which JBoss gets started, the Configuration Manageer stops stating that it failed to start JBoss.
When I go into Windows Services and manually try to start JBoss, it starts but immediately stops.
Any ideas?

Are you able to launch JBoss from the .bat file in the JBoss/Bin directory?
Try that, You may need to adjust the size parameters for JAVA_OPTS.
I have a laptop with 2 Gig of memory, and ended up with these settings;
set JAVA_OPTS=%JAVA_OPTS% -XX:PermSize=256m -XX:MaxPermSize=256m -XX:NewSize=250m -XX:MaxNewSize=250m -XX:SurvivorRatio=6 -Xms512m -Xmx512m.
Once you get JBoss to run from the .Bat file, you will need to apply the settings for PermSize, etc. to the JBoss service by editing the settings in your registry.
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\JBoss for Adobe LiveCycle ES\Parameters
Good Luck
Mark

As soon as I send my messages they say unable to deliver but then 2 seconds later it delivers. Idk what to do

wwhen i send a message to someone it says that it was unable to deliver but then 2 seconds latee it delivers. It's really bothering me and I don't know what to do about it . Help......

Hey there gentiana1,
It sounds like your phone is not sending messages until a couple of seconds after you tap Send. Since they are going through it seems like your network and (for iMessage) Apple ID information is correct. I would start by quitting the Messages app:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
Thank you for using Apple Support Communities.
Regards,
Sterling

Satellite A110-180 - Fan starts but stops after few seconds

Hi,
I have a Toshiba Satellite A110-180 and when I turn on the computer the fan starts running but it stops in a few seconds and starts again in a while and stops again and starts..... Then the laptop gets heat quickly.
I bought the laptop around 5 years ago so I think that the problem is either the fan or the circuit that controls the fan. Can someone that has had the same problem make me sure that the fan is the problem?
The part number of the fan is ATZHG000500. Does anybody know if a fan with P/N ATZHG000100 is compatible with my laptop or if I can use other fan?
Thanks for your help,

Hi Boarder,
Thanks for your quick reply.
I already cleaned the fan 3 days ago because I thought that perhaps that was the reason of the fan running. I installed a program to control the hard drive and CPUs temperature and at the beginning when I turn on the laptop in the morning the temperature is ok, but when I look an email and surf by internet a little bit for 10 min the temperature increase in 10º or more in CPU and hard drive, and the fan is still running in the same way that I commented (in a discontinuous way). So I don't think that it's normal at least theoretically. I also have another laptop and the fan is running all the time.
I'll check about the thermal grease to see if the condition are fine.

Pressing S doesn't start or stop automatic slide show in PowerPoint 2008

I have an automatic slide show created in PowerPoint 2008 which runs fine on PowerPoint 12.2.3 on a Mac running OS 10.5.8, but when running the same version of PowerPoint on 10.6.2, pressing the S and equal keys do not stop and start the presentation. The only thing that stops the automatic slideshow is control-mouse-click (which of course brings up the sub-menu). Has any one else experienced this?

Hi Glo H,
I tried that and it didn't fix the problem...the music still starts a bit choppy (part way into the music) at the tail end of the 1st slide/beginning of second. I don't know if I mentioned earlier, that the music, when it does come in, is at the point it should be, i.e. like it started with the first slide, just not coming out of the speakers...if that makes any sense
Thanks,
Rob

Videos start but stop although sound continues

Videos will start along with sound but the video will stop although sound continues.If I move my pointer over the video it will jump to where the progress bar indicates where the video is at it's current playback time.How can I fix this problem?

Let me revise this question.Same problem with YouTube vids on Facebook/YouTube ect as stated above with the problem being video hangups.If I wave my mouse pointer over the video in progress the video proceeds but will stop if I don't wave the pointer over the vid.The vid will load and I can hear audio playback but the image will just stop while the audio is still playing.

Concurrent Service start but stop at once

I just install a Oracle Application is vision mode , but there is a problem in Concurrent service , when I power on the Oracle Application Server , the Oracle application can start in normal , but the Concurrent Service can not start, I had start it in manual , It can startup for a while and stop , I repeat serval times to do this , the result is the same,
Is there anyboay can tole me how to fixed it ? tks!

Hi, I had check the Concurrent Service's Log , it show as following :
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 27-APR-2006 23:13:28 -
Shutting down Internal Concurrent Manager : 27-APR-2006 23:13:28
List of errors encountered:
_ 1 _
Concurrent Manager cannot find error description for CONC-System Node
Name not Registered
Contact your support representative.
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
how can I do next ?

IPod Wont Sync - Sync starts but stops

Searched for this topic, found lots of similar but nothing exactly the same.
1. Open iTunes (10.2.1.1)
2. Connect iPod (OS 4.1 8B117)
3. iPod touch shows up in the list of devices
4. Get a message, that new iPod software is available, I click Cancel
5. Syncing "iPod touch" Starting sync message appears
6. Syncing "iPod touch" (Step 1 of 1) message appears. Syncing screen on iPod appears with slide to cancel.
7. iPod returns to list of apps and iTunes stops the sync without any messages
8. Click Sync again and same thing happens again
Some background...
Successfully synced iPod before, but have reformatted my PC since that sync. Reinstalled iTunes and authorized my PC with the same iTunes account.
Have tried this sync on both my Dell Win7 (64-bit) and on a Desktop WinXP (32-bit) with the exact same results.
Message was edited by: sgrimm

- It appears that you have tunes set up to manually manage music. Since you reformatted the computer sees the iPod as a different/new iPod. What you need to do is to transfer you iTunes purchases to the computer by:
http://support.apple.com/kb/HT1848
- You can also redownload at no addition cost apps. See:
http://support.apple.com/kb/HT2519
- You can move non-iTunes purchases to youyrcomputer by:
http://discussions.apple.com/thread.jspa?threadID=2713942&tstart=15
- After you move stuff to your "new" computer, you need to restore you iPod via iTunes and sync it to the "new" PC.

Problem installating Snow Leopard on old Macbook Pro with Intel Core 2 Duo. After creating partition on internal hard disk (Extended Journaled), installation starts but stops at half of the progress bar. Screen asking Restart appears.

Hello:
I have tried installing Snow Leopard via the installation disc on a Macbook Pro (2007) with an Intel Core 2 Duo, but I the installation has failed more than 5 times.
I have first formatted and partitioned the internal hard disk with Mac Os Extended Journal format.
Once the installation starts, it starts without a problem unti lthe progress bar gest until half completed then a screen asking for a Computer Restart shows up.
It asks to press the power button for some time until it the computer shuts down and then, press again to turn it on.
Once turned on, the installation disc gets readed, the installation screen appears again and asks again to start the whole installation process form the beginning.

Then you have a Hardware Problem.
Your system is Crashing part way through the install and Re-Booting because of the crash.
Could be the drive itself or it could be some other hardware part in your system. Like the RAM.
To check if it is the internal drive connect an External drive to the system by USB and do the install on that external. If the install completes then it more then likely the drive is bad. If it crashes again then it is more then likely some other piece of hardware in your system.

HT201272 rented movie won't download - download starts but stops immediately

I rented a movie several weeks ago on our desktop computer. I haven't watched it yet and want to watch it on my laptop (same Apple id and account). My account in iTunes says I have an item to download and gives me a button to click to download, but when I do that the loading "ribbon" starts the working/scrolling thing briefly, but then pops back to the account window with the download prompt, with nothing having happened. How can I get my movie to download?

Hi Dangler19,
Thanks for using Apple Support Communities. If you are unable to watch your rented movie, you can report this to the iTunes Store by following this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
- Ari

How do I download OSX Mavericks? It started, but stopped.

i can't get the OSX Mavericks to download. it started. I had to quit, now I can't get it to start again. How do I get to download again?

10.6.8 Definitely has the Mac App Store.
It should show progress in the 'updates' tab of the App Store (but most likely not the purchases tab, for whatever reason 10.6 never shows anything but either an icon in the dock or the status in the updates tab), but you may have to clear out the temporary files and start it over again.
Check to see if there is a numeric folder in one of the following directories:
Mac HD > Users > 'Your Home Folder' > Library > Application Support > App Store
or
Mac HD > Library > Application Support > App Store
Quit the App Store, remove that numeric folder, then try again.

Apple Mobile Device Started, but stopped itself

I need your help. for some reason, when i started the apple mobile service, moments later, the service stopped itself. i don't know why.. do any of you know why?

here's what i got:
Microsoft Windows 7 Business Edition (Build 7600)
Compaq Presario 061 RE467AA-ABA SR2010NX NA640
iTunes 10.1.1.4
QuickTime 7.6.9
FairPlay 1.10.14
Apple Application Support 1.4.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.0.69
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 415253AE3B23AAE5
Current user is an administrator.
The current local date and time is 2011-01-20 19:14:32.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 8400 GS
** External Plug-ins Information **
No external plug-ins installed.
** Device Connectivity Tests **
iPodService 10.1.1.4 is currently running.
iTunesHelper 10.1.1.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently not running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
LSI 1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod touch (2nd generation) running firmware version 4.2.1
any idea whats wrong?

9iAS Rel2 OID starts but stops automatically seconds later

Similar Messages

Maybe you are looking for