Aaa ldap problem on UCS Manager
Hi all,
i'm working on UCS Manager Suite and i would like configure Authentication method using LDAP protocol ( AD : Windows 2008 R2 Standard Edition).
I follow this configuration guide:
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/sample_configurations/UCSM_1_4_LDAP_with_AD/b_Sample_Configuration_LDAP_with_AD.pdf
but i obtained some message : authentication failed.
10.164.85.2 (UCS Manager)
10.164.85.21 (AD)
I have some doubt regarding "Non-Admin Bind User Account" : what are the privileges that it need?
In attach wireshark capture taken on AD Server.
Regards.
Dino
Hi Brian,
I deleted ldap provider profle and reconfigure new profile with same parameters and now it works.
I already use "aaa test server" command to verify authentication and it's works BUT if i checks output
scope security
scope ldap
show server
i obtained same output
DAP server:
Hostname or IP address DN to search and read Port SSL Password
10.164.85.21 CN=ucs binduser,OU=DDUsers,DC=didata-dc,DC=local
389 No
I expected **** under Password column.
Thank you for support.
Regards.
Dino
Similar Messages
-
Monitoring Cisco UCS Manager via HP System Information Manager 7.1 (SIM)
I am working with a customer to configure HP System Information Manager 7.1 (SIM) to monitor their Cisco UCS Manager.
The customer is looking to monitor the following:
- CPU Utilization on manager, blades, servers, etc...
- Memory utilization
- Network utilization
- System inventory
Alerting is needed for the following:
- Hardware failures: memory, power supply, drive, etc...
- Predictive failures
- Alert messages
I have the list of all the MIBs provided by Cisco but an having the following issues while loading them into HP SIM.
While loading MIB "CISCO-UNIFIED-COMPUTING-TC-MIB" I get the following error message:
Line 128: Error defining object: expected a label, found reserved symbol {
Line in MIB: SYNTAX Gauge32 {
Guage32 is imported from SNMPv2-SMI MIB
To get past this error I found a version of the MIB that removes all the textual conventions that where causing errors. I have attached the fixed MIB file to this discussion. With the fixed version of the MIB installed in SIM everything compiles and installs except the following two MIBS. CISCO-UNIFIED-COMPUTING-NOTIFS-MIBCISCO-UNIFIED-COMPUTING-CONFORM-MIB Questions:
1. Is there any way to get the CISCO-UNIFIED-COMPUTING-TC-MIB MIB to install correctly into HP SIM?
2. Is my MIB load order setup correctly?
3. Has anyone had success getting HP SIM to monitor and alert for Cisco UCS manager?
MIB Load Order:
SNMPv2-SMI
SNMPv2-TC
SNMP-FRAMEWORK-MIB
RFC1213-MIB
IF-MIB
CISCO-SMI
CISCO-ST-TC
ENTITY-MIB
INET-ADDRESS-MIB
CISCO-UNIFIED-COMPUTING-MIB
CISCO-UNIFIED-COMPUTING-TC-MIB
CISCO-UNIFIED-COMPUTING-FAULT-MIB
CISCO-UNIFIED-COMPUTING-NOTIFS-MIB
CISCO-UNIFIED-COMPUTING-AAA-MIB
CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB
CISCO-UNIFIED-COMPUTING-BIOS-MIB
CISCO-UNIFIED-COMPUTING-BMC-MIB
CISCO-UNIFIED-COMPUTING-CALLHOME-MIB
CISCO-UNIFIED-COMPUTING-CAPABILITY-MIB
CISCO-UNIFIED-COMPUTING-COMM-MIB
CISCO-UNIFIED-COMPUTING-COMPUTE-MIB
CISCO-UNIFIED-COMPUTING-CONFORM-MIB
CISCO-UNIFIED-COMPUTING-DCX-MIB
CISCO-UNIFIED-COMPUTING-DHCP-MIB
CISCO-UNIFIED-COMPUTING-DIAG-MIB
CISCO-UNIFIED-COMPUTING-DPSEC-MIB
CISCO-UNIFIED-COMPUTING-EPQOS-MIB
CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB
CISCO-UNIFIED-COMPUTING-ETHER-MIB
CISCO-UNIFIED-COMPUTING-EVENT-MIB
CISCO-UNIFIED-COMPUTING-EXTMGMT-MIB
CISCO-UNIFIED-COMPUTING-EXTVMM-MIB
CISCO-UNIFIED-COMPUTING-FABRIC-MIB
CISCO-UNIFIED-COMPUTING-FC-MIB
CISCO-UNIFIED-COMPUTING-FCPOOL-MIB
CISCO-UNIFIED-COMPUTING-FIRMWARE-MIB
CISCO-UNIFIED-COMPUTING-FLOWCTRL-MIB
CISCO-UNIFIED-COMPUTING-HOSTIMG-MIB
CISCO-UNIFIED-COMPUTING-IMGPROV-MIB
CISCO-UNIFIED-COMPUTING-IMGSEC-MIB
CISCO-UNIFIED-COMPUTING-IPPOOL-MIB
CISCO-UNIFIED-COMPUTING-IQNPOOL-MIB
CISCO-UNIFIED-COMPUTING-ISCSI-MIB
CISCO-UNIFIED-COMPUTING-LICENSE-MIB
CISCO-UNIFIED-COMPUTING-LLDP-MIB
CISCO-UNIFIED-COMPUTING-LSBOOT-MIB
CISCO-UNIFIED-COMPUTING-LSMAINT-MIB
CISCO-UNIFIED-COMPUTING-LS-MIB
CISCO-UNIFIED-COMPUTING-MACPOOL-MIB
CISCO-UNIFIED-COMPUTING-MAPPINGS-MIB
CISCO-UNIFIED-COMPUTING-MEMORY-MIB
CISCO-UNIFIED-COMPUTING-MGMT-MIB
CISCO-UNIFIED-COMPUTING-NETWORK-MIB
CISCO-UNIFIED-COMPUTING-NWCTRL-MIB
CISCO-UNIFIED-COMPUTING-ORG-MIB
CISCO-UNIFIED-COMPUTING-OS-MIB
CISCO-UNIFIED-COMPUTING-PCI-MIB
CISCO-UNIFIED-COMPUTING-PKI-MIB
CISCO-UNIFIED-COMPUTING-PORT-MIB
CISCO-UNIFIED-COMPUTING-POWER-MIB
CISCO-UNIFIED-COMPUTING-PROCESSOR-MIB
CISCO-UNIFIED-COMPUTING-PROC-MIB
CISCO-UNIFIED-COMPUTING-QOSCLASS-MIB
CISCO-UNIFIED-COMPUTING-SOL-MIB
CISCO-UNIFIED-COMPUTING-STATS-MIB
CISCO-UNIFIED-COMPUTING-STORAGE-MIB
CISCO-UNIFIED-COMPUTING-SW-MIB
CISCO-UNIFIED-COMPUTING-SYSDEBUG-MIB
CISCO-UNIFIED-COMPUTING-SYSFILE-MIB
CISCO-UNIFIED-COMPUTING-TOP-MIB
CISCO-UNIFIED-COMPUTING-TRIG-MIB
CISCO-UNIFIED-COMPUTING-UUIDPOOL-MIB
CISCO-UNIFIED-COMPUTING-VM-MIB
CISCO-UNIFIED-COMPUTING-VNIC-MIB
References:
ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-manager-supportlist.html#_Toc303691433
http://www.hp.com/wwsolutions/misc/hpsim-helpfiles/simsnmp.pdfPlease post "debug ccsip messages".
Based on your debug you are getting "Cause No. 38 - network out of order."
You may want to bind SIP to an interface that the IP address is defined which Lync points to.
Chris -
UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error
We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
"The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
Has any dealt with this issue successfully, or have any insight into the problem?Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.
-
I've installed the UCS management pack for Microsoft SCOM 2007 R2. It appears to be working, however I now keep seeing all computers that have the SCOM agent installed trying to run the cisco.ucs.computer.probeaction.vbs script, which fails and generates alerts. Does anyone know why these servers that are unrelated to UCS would be trying to run these scripts, or how to fix this problem?
The Problem is that you use an “&” string in a name of one of the protection Groups.
Change the name of the protection Group where you have used an “&” symbol
. Restart the “System Center Management” and you should see that the discovery success.
If still have same issue, started to register the differtent dll’s again on the machine and apparently registering the MOMScriptAPI.dll
http://scug.be/dieter/2012/11/08/scom-event-id-21406-file-name-or-class-not-found/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
UCS Manager Issue with 2.0(2q) and Java
Hey All,
I have done some reasearch and realize that we are far behind in our current UCS software but I am running into an issue.
In Jan/Feb we are supposed to do a major upgrade of both our UCS and CUCM\UC infrastructure at my job. In prep for that I need to get some info from UCS manager.
The problem is that when I try to connect to the UCS manager I get an error message, see image 1 below. In doing some reading I see the UCSM version we are running is not compatible with Java 7 so I also installed. Java 6 (, 2 different release) which you can see in image 2 below. In running either of those versions I get this issue.
Sort of a problem since I need info off the UCS to plan for the upgrade but can't get to it to get that info.
Anyone know of a specific Java version that will work with it?
IMAGE 1
IMAGE 2You need to totally uninstall Java 7 from your computer.
Java 6 must be 32bit. -
Problem installing SOLUTION MANAGER in db2
Dear consultans;
I have a problem installing solution manager in db2.
In phase 'Import ABAP' the sapinst shows the following message:
Execution of the command "/usr/sap/SOL/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
ERROR 2008-08-26 11:19:30.422
CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.e
xe.log.
ERROR 2008-08-26 11:19:30.748 [sixxcstepexecute.cpp:951]
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Cr
eateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnecti
on was executed with status ERROR ( Last error reported by the step :Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exi
ts with error code 2. For details see log file(s) R3load.exe.log.).
The file R3load.exe.log show the following..
(root)sidtsmp:/install/instalacion> more R3load.exe.log
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
And if I do the following sentence it's finished ok
sidtsmp:db2sol 6> db2 connect to SOL
Database Connection Information
Database server = DB2/AIX64 9.1.4
SQL authorization ID = DB2SOL
Local database alias = SOL
(root)sidtsmp:/sapmnt/SOL/exe> su - db2sol
sidtsmp:db2sol 1> db2 connect to SOL user sapsol
Enter current password for sapsol:
Database Connection Information
Database server = DB2/AIX64 9.1.4
SQL authorization ID = SAPSOL
Local database alias = SOL
I reboot the server and now the sentence finished wrong.
sidtsmp:db2sol 8> db2 connect to SOL user sapsol
Enter current password for sapsol:
SQL30082N Security processing failed with reason "15" ("PROCESSING FAILURE").
SQLSTATE=08001
sidtsmp:db2sol 9>
Any suggestion?
Best regards,
JuleneHi Julene.
Just one suggestion really,....
post the question on the Solution Manager forum
Chrs, M -
What kind of permissions are needed in LDAP to install Access Manager?
Hi people,
I'm trying to install Access Manager in three different machines, and i'll try to configure them in a failover schema, but I'm not the owner of the LDAP where the Access Manager DIT is going to live, my question is what kind of permissions do I need to install it, rigth now I've tried to install it three times and I can't get a succesfull install process, this is a resume of the common errors that I've got in the Java_Enterprise_System_Config_Log.xxxx
adding new entry ou=portalmmm_1.0_n21i,ou=internalData,ou=1.0,ou=SunAMClientData,ou=ClientData,o=bbva
sleep 3
ERROR : Configuring/Loading of the default DIT in the Directory Server failed
CLASSPATH is --- /opt/SUNWam/locale:/etc/opt/SUNWam/config:/opt/SUNWam/lib:/opt/SUNWam/lib/am_services.jar:/opt/SUNWam/lib/ldapjdk.jar:/usr/share/lib/mps/secv1/jss4.jar:/opt/SUNWam/lib/am_sdk.jar
Loading service schema XML files ...
Info 109: Calling SCHEMA MANAGER
Info 110: XML file to import:/etc/opt/SUNWam/config/ums/ums.xml
Info 103: Loading Service Schema XML /etc/opt/SUNWam/config/ums/ums.xml
Loading Service Schema XML /etc/opt/SUNWam/config/ums/ums.xml
Error occured while loading: /etc/opt/SUNWam/config/ums/ums.xml
Error Log:
ldap_modify: Insufficient access
ldap_modify: additional info: Insufficient 'write' privilege to the 'nsslapd-pluginEnabled' attribute of entry 'cn=referential integrity postoperation,cn=plugins,cn=config'.
ldap_modify: Insufficient access
ldap_modify: additional info: Insufficient 'write' privilege to the 'nsslapd-pluginarg10' attribute of entry 'cn=referential integrity postoperation,cn=plugins,cn=config'.
ldap_add: Already exists
ldap_add: Insufficient access
ldap_add: Insufficient access
ldap_add: Insufficient access
ldap_add: Insufficient access
ldap_add: Insufficient access
ldap_add: Already exists
ldap_add: Already exists
ldap_add: Already exists
ldap_add: Already exists
ldap_add: Already exists
ldap_modify: Insufficient access
ldap_modify: additional info: Insufficient 'write' privilege to the 'nsslapd-sizelimit' attribute of entry 'cn=config'.
ldap_modify: Insufficient access
ldap_modify: additional info: Insufficient 'write' privilege to the 'nsslapd-timelimit' attribute of entry 'cn=config'.
ldap_modify: Insufficient access
ldap_modify: additional info: Insufficient 'write' privilege to the 'nsslapd-lookthroughlimit' attribute of entry 'cn=config,cn=ldbm database,cn=plugins,cn=config'.
ldap_add: Already exists
ldap_add: Insufficient access
ldap_add: additional info: Insufficient 'add' privilege to add the entry 'ou=DSAME Users,o=isp'.
ldap_modify: Type or value exists
ldap_modify: Insufficient access
ldap_modify: additional info: Insufficient 'write' privilege to the 'objectClass' attribute of entry 'o=isp'.
ldap_modify: Insufficient access
ldap_modify: additional info: Insufficient 'write' privilege to the 'objectClass' attribute of entry 'o=isp'.
ldap_modify: Insufficient access
ldap_modify: additional info: Insufficient 'write' privilege to the 'objectClass' attribute of entry 'o=isp'.
ldap_add: No such object
ldap_add: matched: o=isp
ldap_add: No such object
ldap_add: matched: o=isp
/opt/SUNWam/bin/amadmin: -Dcom.sun.identity.sm.enableDataStoreNotification=true: not found
Error 29: ServiceManager Exception
Error 10: Cannot process requests:
sms-UNKNOWN_EXCEPTION_OCCURRED
Identity Server Configuration Failed ...
Configuration failed for : ISConfigurator
*** End configuring ISConfigurator***Please suggest...
Thanks in advance
LaloYou can't install Access Manager without full control on the base organization.
You need the Directory Manager user (maybe with a temporary password) or a user with full permissions on the Access Manager root DN.
Hope It Helps
Saludos!! -
Problem about space management of archived log files
Dear friends,
I have a problem about space management of archived log files.
my database is Oracle 10g release 1 running in archivelog mode. I use OEM(web based) to config all the backup and recovery settings.
I config "Flash Recovery Area" to do backup and recovery automatically. my daily backup schedule is every night at 2:00am. and my backup setting is "disk settings"--"compressed backup set". the following is the RMAN script:
Daily Script:
run {
allocate channel oem_disk_backup device type disk;
recover copy of database with tag 'ORA$OEM_LEVEL_0';
backup incremental level 1 cumulative copies=1 for recover of copy with tag 'ORA$OEM_LEVEL_0' database;
the retention policy is the second choice, that is "Retain backups that are necessary for a recovery to any time within the specified number of days (point-in-time recovery)". the recovery window is 1 day.
I assign enough space for flash recovery area. my database size is about 2G. I assign 20G as flash recovery area.
now here is the problem, through oracle online manual, it said oracle can manage the flash recovery area automatically, that is, when the space is full, it can delete the obsolete archived log files. but in fact, it never works! whenever the space is full, the database will hang up! besides, the status of archived log files is very strange, for example, it can change "obsolete" stauts from "yes" to "no", and then from "no" to "yes". I really have no idea about this! even though I know oracle usually keep archived files for some longer days than retention policy, but I really don't know why the obsolete status can change automatically. although I can write a schedule job to delete obsolete archived files every day, but I just want to know the reason. my goal is to backup all the files on disk and let oracle automatically manage them.
also, there is another problem about archive mode. I have two oracle 10g databases(release one), the size of db1 is more than 20G, the size of db2 is about 2G. both of them have the same backup and recovery policy, except I assign more flash recovery area for db1. both of them are on archive mode. both of nearly nobody access except for the schedule backup job and sometime I will admin through oem. the strange thing is that the number of archived log files of smaller database, db2, are much bigger than ones of bigger database. also the same situation for the size of the flashback logs for point-in-time recovery. (I enable flashback logging for fast database point-in-time recovery, the flashback retention time is 24 hours.) I found the memory utility of smaller database is higher than bigger database. nearly all the time the smaller database's memory utility keeps more than 99%. while the bigger one's memory utility keeps about 97%. (I enable "Automatic Shared Memory Management" on both databases.) but both database's cup and queue are very low. I'm nearly sure no one hack the databases. so I really have no idea why the same backup and recovery policy will result so different result, especially the smaller one produces more redo logs than bigger one. does there anyone happen to know the reason or how should I do to check the reason?
by the way, I found web based OEM can't reflect the correct database status when the database shutdown abnormally. for example, if the database hang up because of out of flash recovery area, after I assign more flash recovery area space and then restart the database, the OEM usually can't reflect the correct database status. I must restart OEM manually to correctly reflect the current database status. does there anyone know in what situation I should restart OEM to reflect the correct database status?
sorry for the long message, I just want to describe in details to easy diagnosis.
any hint will be greatly appreciated!
Sammythank you very much, in fact, my site's oracle never works about managing archive files automatically although I have tried all my best. at last, I made a job running daily to check the archive files and delete them.
thanks again. -
Logon problem with oracle management server
I have problem with Oracle Management Server when I connect to the OMS message comes
The exception (java.lang.NullPointerException) occurred.
if any body have any idea pls tell usHi,
Oracle has changed the Enterprise Manager from version 1.5 to 2.0 .
With the new Oracle8i dataase server another service has been added.
If you want to user the OEM you have to install The Managment Server.
The Managment server has its own user and privileges and is recommended when using OEM. -
Clearing UCS Manager fault about unused adapter uplink from C-series
I have a number of C240M3 servers in a UCS infrastructure. They all have two VIC 1225 adapters and when they were initially connected, the technicians accidentally connected the second adapter on some of them to the FEXs. For now at least, we only want the first adapters used (both ports - one to each FEX). However, since adapter 2 was connected at one point, UCS Manager won't stop giving these faults:
F0206 - Adapter 5/2 is unreachable
F0209 - Adapter uplink interface 5/2/1 link state: unavailable
It doesn't seem to have a way to clear the faults without reconnecting that second adapter. Re-acknowledging the server didn't help and I'm not sure I want to try decommissioning them and then getting them to appear in UCS again.
Does anyone know how to manually clear these faults?Hi Kenny,
Correct; the second PCIe card is not connected to a FEX anymore. I tried reack'ing the FEXs but that didn't help, unfortunately. (If it helps, the fault appears in the individual servers' Faults tab - the FEXs don't show any faults.) -
Where to download VM-FEX software on UCS manager 2.1(1a)?
I'm looking for the .vib file to install it on the ESXi host.
On UCS manager 2.0, there use to be a link on the main page to download the file.
One 2.1(1a), it's not there.
Any idea where I can find it?
Thanks in advance.Hi Thomas,
VNMC (Virtual Network Management Center) provides a centralized multi-device and policy management for virtual network services like Cisco vASA and VSG.
Please post your question on UCS support forum (https://supportforums.cisco.com/community/netpro/data-center/unified-computing) if you still have this question.
Thanks,
Ranga -
Problem with discovering Managed Servers
Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server everything
seems to be ok (the directive: Starting discovery of managed server... appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in a server
tag that particular managed servers are running.
I'm looking forward for any clues
MichalSorry,
i cannot stop those managed server - in Control tab I have active only option
to start those server but they are running. In logging tab when I want to browse
the log the message that probably this server is not running appear. However in
the tab when all servers are listened there is a message that they are running
"Michal" <[email protected]> wrote:
>
Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server
everything
seems to be ok (the directive: Starting discovery of managed server...
appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in
a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal -
UCS manager blade memory "Delete" command
I have a question, and I cannot seem to find an answer in documentation or other questions on the support community. In UCS Manager, if you click a blade server, click the inventory tab, click the memory subtab, you see a graphical display of the memory modules. If you click on a moduleto select it then right-click it, the menu available includes a "Delete" command. Does this shut down that particular module, or does it just keep UCS Manager from monitoring it? Or is it something else more damaging or permanent? Is it possible to "Add" the module back once that command was issued? If possible, please provide any documentation or links that would answer this definitively. Thanks!
GilThanks for the information! I work with a group that is performing some failure testing, and we were trying to figure a way to fail a memory module while the blade is running. We were not sure of the purpose of the mentioned command in UCS manager and did not want to try it without knowing if it had serious consequences.
-
Web.xml problem in Enterprise Manager 10g
I got an error while deploying to Enterprise Manager 10g
My platform: Windows XP
OC4J 9.0.4
Enterprise Manager 10g
And I even have the web.xml in the correct directory. i.e
cpd.ear
./META-INF/application.xml
./cpd-ejb.jar/WEB-INF/web.xml
./cpd-webapp.war/WEB-INF/web.xml
./cpd-webapp.war/WEB-INF/classes
The error I get while deploying on a Enterprise Manager 10g is:
Invalid J2EE application file specified - Jar file: :\WINNT\TEMP\jar47575.tmp is missing its standard xml descriptor located at WEB-INF/web.xml
Incidently the *.ear file built by my fellow's machine is deploying perfectly. I've compared the directories n useful files of both the *.ears down to the very last bit n they are the same.
I can imagine that guys with only high IQ can solve this mysteryThe above message is a duplicate of another message by Sim.
web.xml problem in Enterprise Manager 10g -
Hi, i have problem with session manager's session files. The problem is: the submitted storage data from firefox which is put between "storage":{ and its matching closing brace } But in some of my session files there is non equal { and } under storage's braces. I need to get storage data but in my case it is very hard to do. My question is there any char put before or after { and } like /{ or \{ to avoid confusion? If there is not such thing, i think there could be different solution but i am not sure: i look couple of my session files; after "storage":{...} there is ,_"formDataSaved" so i can get storage data in this example ... by looking between "storage":{ and ,"_formDataSaved" easily. Is there every time ,"_formDataSaved" after "storage":{ ? Thank you.
Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you
Maybe you are looking for
-
Hi , i am trying add RSS section with URL http://api.foxnews.com/proxy/content/v2?sort=date desc&omitHeader=true&api_key=cc23011f-3ace-40a4-bb63-bfa654af5bc8&format=full-content-rss.xml&rows=20&q=content_type:article AND image_url:* AND section_pat
-
Error while trying to change settings in SALE
Hi I am trying to trigger Idocs from QAS, ECC to XI. There are some problems with the settings. I went to SALE -.> Logical System --> Define Logical System and reach " Display Logical Systems OverView screen. Here under the Logical Systems, I don't
-
I am running Windows 8. Every time I save a PDF it opens in UserName - AppData - Local - Temp I have tried changing the download location in Firefox. I've also Googled this problem and IE has the same issue - the fix for IE is declaring the site as t
-
Hi I have updated Vendor Master in R3 and just wanted to know the Table Name which captures the information regarding 'when' and 'who' made the changes. Thanks...
-
When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up so I can see and click the hang up button, but it then blacks out intermittently and in the brief moments it is lit up, the hang up butto