Clearing UCS Manager fault about unused adapter uplink from C-series

I have a number of C240M3 servers in a UCS infrastructure.  They all have two VIC 1225 adapters and when they were initially connected, the technicians accidentally connected the second adapter on some of them to the FEXs.  For now at least, we only want the first adapters used (both ports - one to each FEX).  However, since adapter 2 was connected at one point, UCS Manager won't stop giving these faults:
F0206 - Adapter 5/2 is unreachable
F0209 - Adapter uplink interface 5/2/1 link state: unavailable
It doesn't seem to have a way to clear the faults without reconnecting that second adapter.  Re-acknowledging the server didn't help and I'm not sure I want to try decommissioning them and then getting them to appear in UCS again.
Does anyone know how to manually clear these faults?

Hi Kenny,
Correct; the second PCIe card is not connected to a FEX anymore.  I tried reack'ing the FEXs but that didn't help, unfortunately.  (If it helps, the fault appears in the individual servers' Faults tab - the FEXs don't show any faults.)

Similar Messages

  • Nexus 1000v UCS Manager M81KR

    Hello everyone
    I am confused about how works the integration between N1K and UCS Manager:
    First question:
    If two VMs on different ESXi and different VEM but in the same VLAN,would like to talk each other, the data flow between them is managed from the upstream switch( in this case UCS Fabric Inteconnect), isn'it?
    I created a Ethernet uplink port-profile on N1K in switch port mode access(100), I created a vEthernet port-profile for the VM in switchport mode access(100) as well. In the Fabric Interconnect I created a vNIC profile for the physical NICs of ESXi(where there are the VMs). Also I created the vlan 100(the same in N1K)
    Second question: With the configuration above, if I include in the vNIC profile the vlan 100 (not as native vlan) only, the two VMs can not ping each other. Instead if I include in the vNIC profile only the defaul vlan(I think it is the vlan 1) as native vlan evereything works fine. WHY????
    Third question: How it works the tagging vlan on Fabric interconnectr and also in N1K.
    I tried to read differnt documents, but I did not understand.
    Thanks                 

    Since you have defined switchport mode access vlan 100 on uplink port-profile of Nexus 1000v, it sends all ethernet frames untagged(without 802.1q tag).
    When you include in the vNIC profile the vlan 100 (not as native vlan) ONLY like below screenshot, untagged frames are dropped because UCS expects all frames received on this port as tagged frames.
    When you change vNIC template to include default vlan as native vlan ONLY like below screen shot, you basically bridge two vlans (vlan 100 and vlan 1) because UCS FI now puts all untagged frames in vlan 1. and sends untagged frames to other ESXi host and ESXi host again bridge vlan 1 to vlan 100 with switchport mode access vlan 100 on uplink port profile.

  • Nexus 1000v UCS Manager and Cisco UCS M81KR

    Hello everyone
    I am confused about how works the integration between N1K and UCS Manager:
    First question:
    If two VMs on different ESXi and different VEM but in the same VLAN,would like to talk each other, the data flow between them is managed from the upstream switch( in this case UCS Fabric Inteconnect), isn'it?
    I created a Ethernet uplink port-profile on N1K in switch port mode access(100), I created a vEthernet port-profile for the VM in switchport mode access(100) as well. In the Fabric Interconnect I created a vNIC profile for the physical NICs of ESXi(where there are the VMs). Also I created the vlan 100(the same in N1K)
    Second question: With the configuration above, if I include in the vNIC profile the vlan 100 (not as native vlan) only, the two VMs can not ping each other. Instead if I include in the vNIC profile only the defaul vlan(I think it is the vlan 1) as native vlan evereything works fine. WHY????
    Third question: How it works the tagging vlan on Fabric interconnectr and also in N1K.
    I tried to read differnt documents, but I did not understand.
    Thanks                 

    This document may help...
    Best Practices in Deploying Cisco Nexus 1000V Series Switches on Cisco UCS B and C Series Cisco UCS Manager Servers
    http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9902/white_paper_c11-558242.html
    If two VMs on different ESXi and different VEM but in the same  VLAN,would like to talk each other, the data flow between them is  managed from the upstream switch( in this case UCS Fabric Inteconnect),  isn'it?
    -Yes.  Each ESX host with the VEM will have one or more dedicated NICs for the VEMs to communicate with the upstream network.  These would be your 'type ethernet' port-profiles.  The ustream network would need to bridge the vlan between the two physicall nics.
    Second question: With the configuration above, if I include in the vNIC  profile the vlan 100 (not as native vlan) only, the two VMs can not ping  each other. Instead if I include in the vNIC profile only the defaul  vlan(I think it is the vlan 1) as native vlan evereything works fine.  WHY????
    -  The N1K port profiles are switchport access making them untagged.  This would be the native vlan in ucs.  If there is no native vlan in the UCS configuration, we do not have the upstream networking bridging the vlan.
    Third question: How it works the tagging vlan on Fabric interconnectr and also in N1K.
    -  All ports on the UCS are effectively trunks and you can define what vlans are allowed on the trunk as well as what vlan is passed natively or untagged.  In N1K, you will want to leave your vEthernet port profiles as 'switchport mode access'.  For your Ethernet profiles, you will want them to be 'switchport mode trunk'.  Use an used used vlan as the native vlan.  All production vlans will be passed from N1K to UCS as tagged vlans.
    Thank You,
    Dan Laden
    PDI Helpdesk
    http://www.cisco.com/go/pdihelpdesk

  • Monitoring Cisco UCS Manager via HP System Information Manager 7.1 (SIM)

    I am working with a customer to configure HP System Information Manager 7.1 (SIM) to monitor their Cisco UCS Manager.
    The customer is looking to monitor the following:
    - CPU Utilization on manager, blades, servers, etc...
    - Memory utilization
    - Network utilization
    - System inventory
    Alerting is needed for the following:
    - Hardware failures: memory, power supply, drive, etc...
    - Predictive failures
    - Alert messages
    I have the list of all the MIBs provided by Cisco but an having the following issues while loading them into HP SIM.
    While loading MIB "CISCO-UNIFIED-COMPUTING-TC-MIB" I get the following error message:
    Line 128: Error defining object: expected a label, found reserved symbol {
    Line in MIB: SYNTAX Gauge32 {
    Guage32 is imported from SNMPv2-SMI MIB
    To get past this error I found a version of the MIB that removes all the textual conventions that where causing errors.  I have attached the fixed MIB file to this discussion. With the fixed version of the MIB installed in SIM everything compiles and installs except the following two MIBS. CISCO-UNIFIED-COMPUTING-NOTIFS-MIBCISCO-UNIFIED-COMPUTING-CONFORM-MIB Questions:
    1. Is there any way to get the CISCO-UNIFIED-COMPUTING-TC-MIB MIB to install correctly into HP SIM?
    2. Is my MIB load order setup correctly?
    3. Has anyone had success getting HP SIM to monitor and alert for Cisco UCS manager?
    MIB Load Order:
    SNMPv2-SMI
    SNMPv2-TC
    SNMP-FRAMEWORK-MIB
    RFC1213-MIB
    IF-MIB
    CISCO-SMI
    CISCO-ST-TC
    ENTITY-MIB
    INET-ADDRESS-MIB
    CISCO-UNIFIED-COMPUTING-MIB
    CISCO-UNIFIED-COMPUTING-TC-MIB
    CISCO-UNIFIED-COMPUTING-FAULT-MIB
    CISCO-UNIFIED-COMPUTING-NOTIFS-MIB
    CISCO-UNIFIED-COMPUTING-AAA-MIB
    CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB
    CISCO-UNIFIED-COMPUTING-BIOS-MIB
    CISCO-UNIFIED-COMPUTING-BMC-MIB
    CISCO-UNIFIED-COMPUTING-CALLHOME-MIB
    CISCO-UNIFIED-COMPUTING-CAPABILITY-MIB
    CISCO-UNIFIED-COMPUTING-COMM-MIB
    CISCO-UNIFIED-COMPUTING-COMPUTE-MIB
    CISCO-UNIFIED-COMPUTING-CONFORM-MIB
    CISCO-UNIFIED-COMPUTING-DCX-MIB
    CISCO-UNIFIED-COMPUTING-DHCP-MIB
    CISCO-UNIFIED-COMPUTING-DIAG-MIB
    CISCO-UNIFIED-COMPUTING-DPSEC-MIB
    CISCO-UNIFIED-COMPUTING-EPQOS-MIB
    CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB
    CISCO-UNIFIED-COMPUTING-ETHER-MIB
    CISCO-UNIFIED-COMPUTING-EVENT-MIB
    CISCO-UNIFIED-COMPUTING-EXTMGMT-MIB
    CISCO-UNIFIED-COMPUTING-EXTVMM-MIB
    CISCO-UNIFIED-COMPUTING-FABRIC-MIB
    CISCO-UNIFIED-COMPUTING-FC-MIB
    CISCO-UNIFIED-COMPUTING-FCPOOL-MIB
    CISCO-UNIFIED-COMPUTING-FIRMWARE-MIB
    CISCO-UNIFIED-COMPUTING-FLOWCTRL-MIB
    CISCO-UNIFIED-COMPUTING-HOSTIMG-MIB
    CISCO-UNIFIED-COMPUTING-IMGPROV-MIB
    CISCO-UNIFIED-COMPUTING-IMGSEC-MIB
    CISCO-UNIFIED-COMPUTING-IPPOOL-MIB
    CISCO-UNIFIED-COMPUTING-IQNPOOL-MIB
    CISCO-UNIFIED-COMPUTING-ISCSI-MIB
    CISCO-UNIFIED-COMPUTING-LICENSE-MIB
    CISCO-UNIFIED-COMPUTING-LLDP-MIB
    CISCO-UNIFIED-COMPUTING-LSBOOT-MIB
    CISCO-UNIFIED-COMPUTING-LSMAINT-MIB
    CISCO-UNIFIED-COMPUTING-LS-MIB
    CISCO-UNIFIED-COMPUTING-MACPOOL-MIB
    CISCO-UNIFIED-COMPUTING-MAPPINGS-MIB
    CISCO-UNIFIED-COMPUTING-MEMORY-MIB
    CISCO-UNIFIED-COMPUTING-MGMT-MIB
    CISCO-UNIFIED-COMPUTING-NETWORK-MIB
    CISCO-UNIFIED-COMPUTING-NWCTRL-MIB
    CISCO-UNIFIED-COMPUTING-ORG-MIB
    CISCO-UNIFIED-COMPUTING-OS-MIB
    CISCO-UNIFIED-COMPUTING-PCI-MIB
    CISCO-UNIFIED-COMPUTING-PKI-MIB
    CISCO-UNIFIED-COMPUTING-PORT-MIB
    CISCO-UNIFIED-COMPUTING-POWER-MIB
    CISCO-UNIFIED-COMPUTING-PROCESSOR-MIB
    CISCO-UNIFIED-COMPUTING-PROC-MIB
    CISCO-UNIFIED-COMPUTING-QOSCLASS-MIB
    CISCO-UNIFIED-COMPUTING-SOL-MIB
    CISCO-UNIFIED-COMPUTING-STATS-MIB
    CISCO-UNIFIED-COMPUTING-STORAGE-MIB
    CISCO-UNIFIED-COMPUTING-SW-MIB
    CISCO-UNIFIED-COMPUTING-SYSDEBUG-MIB
    CISCO-UNIFIED-COMPUTING-SYSFILE-MIB
    CISCO-UNIFIED-COMPUTING-TOP-MIB
    CISCO-UNIFIED-COMPUTING-TRIG-MIB
    CISCO-UNIFIED-COMPUTING-UUIDPOOL-MIB
    CISCO-UNIFIED-COMPUTING-VM-MIB
    CISCO-UNIFIED-COMPUTING-VNIC-MIB
    References:
    ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-manager-supportlist.html#_Toc303691433
    http://www.hp.com/wwsolutions/misc/hpsim-helpfiles/simsnmp.pdf

    Please post "debug ccsip messages".
    Based on your debug you are getting "Cause No. 38 - network out of order."
    You may want to bind SIP to an interface that the IP address is defined which Lync points to.
    Chris

  • FrameMaker 10: Manage used and unused styles

    http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/framemaker/pdf/FRAM EMAKER11_UPGRADE_GUIDE.PDF says FM 10 introduced the ability to "Manage used and unused styles: paragraph, character, table" but I am unable to find that information in the (exceedingly unhelpful) help system. Can anyone point me to a discussion of this featue? We are moving to new templates and would like to make the transition as painless as possible.

    Hi, Beverly:
    Extendscript was introduced in FrameMaker 10. Perhaps someone's already created a script for this. I'm not sure if Extendscripts can be assigned to a keyboard shortcut. Perhaps soneone on the forum can point to an existing script, and also confirm whether a script can be assigned to a KBSC.
    [EDIT]
    I forgot to mention: Search Google for terms like "framemaker 10 extendscript" without quotes for info about Extendscript. Even if you don't want to add scripting to your resume, you might get some useful ideas from this link:
    http://www.rickquatro.com/resources/BeginningFrameMakerScripting.pdf
    [/EDIT]
    And, in some future lifetime, your feature request will be incorporated in FM, if you post a formal request here:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices
    Beverly Robinson wrote:
    I'm a keyboard person--I apply styles using the F8 and F9 key--so I don't have the paragraph catalog display at all. I would have put the "Delete all unused formats" option with the delete functionality available through the Commands button on the Paragraph Designer. But that's just me.
    Message was edited by: peter at knowhowpro

  • SNMP Polling from UCS Manager 1.4

    I am having trouble with SNMP Polling from UCS Manager 1.4(1j).
    I seem to only get SNMP data from Nexus such as those described in (http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mib/reference/NX5000_MIBRef.html) I don't see any OIDs corresponding to those mentioned specifically for UCS listed in (ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-manager-supportlist.html).
    Documentation on the cisco web site said that UCS Manager 1.4(1) and above will have MIBS such as CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB available.
    Is there a separate IP addresses I should poll for these or any specific things that need to be set up?
    I am not sure how we can gain access to the UCS related MIB objects exactly. The description on SNMP enable for UCS Manager is very brief (http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/1.4/UCSM_GUI_Configuration_Guide_1_4_chapter6.html#task_2054446421216050764)
    It only described the community string set up under UCS Manager ->Admin->Communication Management -> Communication Services, bu didn’t really say anything about which IP addresses from the Management Interfaces should be used to get them.
    Has anyone successfully polled data from say the CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB and be able to help?
    Thanks in advance.

    Yes indeed.
    I learnt about the CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB and the other Cisco UCS Manager MIB Support list by selecting UCS Manager under the Unified Computing drop down on this http page you quoted.
    (http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/mib/reference/UCS_MIBRef.html)
    Is there anything specific from those docs you are referring to that would make it such that we get the Nexus MIBs rather than ones under UCS Manager?
    The two IP addresses for Fabric Interconnect A and B under Management Interface only give us info from MIBs listed under the Nexus documentation only. Nothing fir say 1.3.6.1.4.1.9.9.719.1.15.
    No SNMP data form the virtual IP address.
    Not sure where data under 1.3.6.1.4.1.9.9.719.1.15 would be accessible

  • Renaming existing VLANs in UCS Manager

    Hi guys
    I would like to find out the possibility of renaming existing VLANs in UCS Manager 2.1.3b or a link where I can get the info or how to do doc best practices.
    Thanks a million,
    Ziccho_Virt

    Hello,
    This feature is not available any of the UCS releases at this time. A workaround if you
    need to make the name change to your existing VLAN, would be to create a new VLAN with the
    name you would prefer and with the same VLAN ID. Then apply this VLAN (with the new name)
    to the interfaces as needed (vNICs and Ethernet uplinks). Once you are certain that you
    have added the "new" VLAN to all interfaces as needed, you may remove the original VLAN
    from each interface. Once the original VLAN is removed from the interfaces, you can then
    delete it from the LAN tab altogether.
    Please note that the above is an unofficial workaround.
    There is an enhancement logged for this behavior. You can follow it's status using this link:
    https://tools.cisco.com/bugsearch/bug/CSCui83127
    Regards,
    -Gabriel

  • Issue about IDoc Adapter Receiver Channel's Performance

    Hi Everyone,
    Currently, I am working on a scenario of File -Integration Process - IDoc in XI 3.0 with patch level 16. The scenario works fine when it process one/two/three files in parallel, and the IDocs arrive R/3 system quite fast. But when I try four files in parallel, the whole XI server blocks, I can not do anything even logon Integration Builder, and the IDocs arrive R/3 brokenly, sometime with the invterval to 10 minutes. When the XI comes back, I found all the four integration processes finish successfully and each transaction works fine and fast. What's more, after I change the IDoc Adapter receiver channel to a File Adapter receiver channel, it works fine for even 20 files in parallel. So I think it is some issue about IDoc Adapter receiver channel. Does anyone have the same experience as me? Any comments will be appreciate.
    Regards,
    Nick

    Hi Nick,
    Can you check this Blog-
    /people/sreekanth.babu2/blog/2005/01/05/delayed-xi-message-processing
    May be useful.
    How are you picking the files .. You can try with EOIO options while picking the file.
    But if you use BPM, it is not applicable. It will act as a EO only.
    Check this SAP Note- 833740
    Thanks,
    Moorthy

  • Please anyone explain me about HTTP adapter

    Can anyone explain about HTTP Adapter (sender,receiver) End to End implementation with screen shots?

    HI
    HTTP Adapter
    The HTTP Adapter allows connection between the Integration Server and application systems. External systems connect to the Integration Server using the native HTTP interface (HTTP payload without SOAP envelope) which is converted to XI protocol (SOAP with header enhancements). The HTTP Adapter allows synchronous and asynchronous message functionality
    http://help.sap.com/saphelp_erp2005/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
    http://www.erpgenie.com/netweaver/xi/adapters/index.htm
    Differences between adapters
    You can use the HTTP adapter. Refer to following SDN TV demo of the HHTP adapter for details steps involved into it.
    https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
    HTTPS using XMLSPY
    http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
    The HTTPS configuration data of the Adapter Engines has to be configured in the SLD.
    More Information in the "SAP Security Guide XI"
    http://help.sap.com/saphelp_nw04/helpdata/de/f7/c2953fc405330ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/65/6a563cef658a06e10000000a11405a/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a
    cheers
    Edited by: vemuganti naga phalguna on Jul 24, 2008 12:16 PM

  • Aaa ldap problem on UCS Manager

    Hi all,
    i'm working on UCS Manager Suite and i would like configure Authentication method using LDAP protocol ( AD : Windows 2008 R2 Standard Edition).
    I follow this configuration guide:
    http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/sample_configurations/UCSM_1_4_LDAP_with_AD/b_Sample_Configuration_LDAP_with_AD.pdf
    but i obtained some message : authentication failed.
    10.164.85.2 (UCS Manager)
    10.164.85.21 (AD)
    I have some doubt regarding  "Non-Admin Bind User Account" : what are the privileges that it need?
    In attach wireshark capture taken on AD Server.
    Regards.
    Dino

    Hi Brian,
    I deleted ldap provider profle and reconfigure new profile with same parameters and now it works.
    I already use "aaa test server" command to verify authentication and it's works BUT if i checks output
    scope security
    scope ldap
    show server
    i obtained same output
    DAP server:
        Hostname or IP address   DN to search and read    Port  SSL  Password
        10.164.85.21             CN=ucs binduser,OU=DDUsers,DC=didata-dc,DC=local
                                                          389   No
    I expected **** under Password column.
    Thank you for support.
    Regards.
    Dino

  • UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error

    We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
    "The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
    I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
    Has any dealt with this issue successfully, or have any insight into the problem?

    Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.

  • Info about CIDX adapter with a scenario

    Hi all,
    Can any one help me out by giving ino about *CIDX* adapter: Where its used and how its used with an example scenario
    In a nutshell complete info about CIDX
    I would be very gartefull
    Thanx in advance

    Hi Prabhakar,
    CIDX Adapter is Chemical Industry standard for data exchange in B2B scenarios. It uses XML formatted in different manner specific to Chemical industry.
    In order to use this, you need to purchase the license.
    There are xml schemas provided by CIDX for each transaction like Order Create, Order change, shipping instruction etc..
    You need to download the once which are required in your scenario and use the same.
    For overview of CIDX in general you can visit http://www.cidx.org

  • PLEASE GIVE ME DETAIL INFORMATION ABOUT MARKETPLACE ADAPTER,ONE EXAMPLE ALS

    DETAILED DESCRIPTION ABOUT MARKETPLACE ADAPTER AND ONE EXAMPLE ABOUT THAT

    Hi Sridhar,
    For more information on the Marketplace Adapter and it's feature, go thro' the below link:-
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/ef487f5b680f4c84d632cfe76ec8cb/content.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/b3/30cc3fbeb83946e10000000a114084/content.htm
    Hope this helps.
    Regards.
    Praveen

  • Question about RFC adapter

    Hi,
    There is this little concept about RFC adapter
    I would like a liitle clarifiaction about..
    Here it goes..
    Let's just say I have made an RFC in R/3.
    The same I have imported In xi.
    now when we say RFC ...By definition
    it is a remote enabled function module.
    We import the "interface" of the Same in Xi
    So if I make changes in the BODY of the RFC in
    R/3... do i need to reimport it in XI.
    Besides when XI's reciver RFC adapter is using the
    Rfc's interface to make changes in R/3
    is it using a Copy of this RFC created in R/3
    I would like to intercep at the point it's doing so...
    tried putting a break point in the body of rfc.
    Another question is regarding RFC sender adapter
    Program ID..tcp Ip protocol.
    Conceptually How does this connectivity takes place
    I tried and it worked ...
    I dunno How to explain this connectivity taking place
    just on the basis of PROGRAM ID...
    Kindly Help

    Hi Deepak,
    +
    >>We import the "interface" of the Same in Xi.So if I make changes in the BODY of the RFC in R/3... do i need to reimport it in XI.+
    Yes you have to.
    >>Another question is regarding RFC sender adapter.Program ID..tcp Ip protocol.Conceptually How does this connectivity takes place I tried and it worked ...I dunno How to explain this connectivity taking place just on the basis of PROGRAM ID...
    ·An RFC server program registers itself under a program ID to an SAP gateway (not for a specific SAP system).
    ·If an RFC call is passed on from any SAP system to this SAP gateway with the option “Connection with a registered program” (with the same program ID), the connection takes place with the corresponding JCo server program.
    http://help.sap.com/saphelp_nw04/helpdata/en/09/c88442a07b0e53e10000000a155106/content.htm
    Hope this will clarify your doubts.
    Regards
    Suraj

  • About Seburger Adapter

    Hi All,
    I Want to Know About Seburger Adapter & It's Functionality, How it will Convert the Data Which is Comming from EDI Systems.
    Can Any One Please Explain me with out Any Doc's, How this Flow  From EDI ANSI  With Serburger Adapter ????
    Regards
    Babu

    Hi,
    1) If Our Sender is EDI Means Should we use this Seburger Adapter Compulsary ?
    If u want to convert the EDI standard data into XML then u have to use seeburger.
    if ur not using XI then no need to conver the data into XML then no need of Seeburger.
    2) What is the Significance of this Seburger Adapter Here ???
    Seeburger is a Tool which will do the mapping and covert the data into XML.U have to use this module in Adapter and it will take care.
    u will have some standard mappings which are already defined in Seeburger ans u have to use that mapping name in Adapter module and Seeburgert must be installed in ur XI server.
    3) Will this Seburger Adapter Convert this ANSI Format to Any XSD like that. ( I heard it Some where else ) So that We can Import this XSD Format into Our Mapping in IR.
    Yes i will convert any type in XSD format or XML format .
    Check below links and sites for Seeburger.
    SEEBURGER
    http://www.seeburger.com
    Please see the below blogs
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    /people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
    http://www.stylusstudio.com/edi/XML_to_X12.html
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
    Details on XI EDI adapter from seeburger
    Check this for Conversions-
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    EDI with XI
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    http://www.seeburger.com
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    Regards,
    Phani
    Reward Points if Helpful

Maybe you are looking for