AAE doesn't support parameterized mapping ?

Hi,
is the AAE doesn't support parameterized mapping ? if yes any workaround for this limitation ? because i want to use JDBC lookup in my mapping ?
Currently, i am using PI 7.1 EHP1 SP3.
Thank You and Best Regards
Fernand

One thing more, as you can't use it it may bother you as you won't be able to use the new box in the graphical mapping to do look ups (JDBC, or RFC), as both boxes get the channel from a parameter.
However, you can still create your own UDF and do the lookup manually with java code, it's not a big issue. I had to do it for RFC lookups some times.

Similar Messages

Integrated configuration with parameterized mapping

Dear All,
My scenario is using integrated configuration AAE. I am trying parameterized mapping with Integrated configuratiion but it throws an error saying that AAE doesnt support parameterized mapping.
I am uisng PI 7.1 I wanted to know doest PI 7.3 support this or which service pack on PI 7.1 support Parametrized mapping with AEE.
Any thoughs on this.
chirag

Hi Chirag,
Integrated Configuration Scenario with Parameterized mapping is not supported in PI 7.1, 7.1 EHP1 or even in 7.3
This is a limitation with AAE based scenarios. However, you can still use Parameterized mapping in Classical Scenarios(ID,RD,SA,RA). This is well supported in PI 7.1 and higher versions.
Please take a look for the CAUTION statement in the following link:
http://help.sap.com/saphelp_nw73/helpdata/en/94/75de6590d64673b1e94ac072842ee3/content.htm
I hope this helps.
Regards,
Gaurav.

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, leave the default; this will change to "Custom" once you start entering port values.
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
Click on Update.
To connect to the shared Camera from a remote location using a Mac or PC:
Start your favorite web browser.
Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888

How to pass input parameter (parameterized mapping) to java mapping program

Hello
I have a question about the parameterized mapping with Java (PI 7.1).
In the operation mapping (using Java-class) I defined a inputer parameter (string). I think I am supposed to retrieved the value using:
arg0.getInputParameters().getString("myInputParameterName");
where arg0 is the TransformationInput object.
However I am not able to get the value, I got runtime exception saying the inputer parameter doesn't exit.
Then I figured out maybe I need to bind the OM input parameter to Java mapping parameter, just like in case of message mapping, you need to bind OM parameter to MM parameter. However there is no way to define input parameter for the java mapping program.
Anybody has done java mapping with parameterized mapping?
Anybody can give any hint for this?
Thanks
Jayson

InputParameters params = container.getInputParameters();
DynamicConfiguration conf = (DynamicConfiguration) params.getValue(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Edited by: Anand on Dec 10, 2008 4:13 PM

Why sever-side state saving doesn't support fail over?

Hi all,
In my previous thread "ADF server-side state saving method" Frank said that it doesn't support fail over.
Re: ADF server-side state saving method
My customer is wondering the reason.
If anyone has a clear statement about it, could you share it?
Any help will be much appreciated.
Atsushi

Timo,
As I wrote in my previous thread, my customer adopted multi-windows application design because they didn't know it caused viewExpiredException frequently.
Now I'm looking for the best setting for avoiding the exception and need ADF guru's help.
Frank said that ADF is on Sun's RI. And it seems that the state-saving parameters of Mojarra are working correctly in my environment. However any ADF docs don't mention the behavior of server-side state saving clearly. When I set state-saving method "server", view states are managed per logical view (≒ window). And it seems better for multi-window application than using client-token based state management from the perspective of preventing viewExpiredException.
Because fail over is not their requirement, if we could make sure that server-side state saving doesn't have other side-effects they might adopt it.
So I'd like to know in more detail about the behavior.
Thanks,
Atsushi

CachedRowSetXImpl doesn't set parameters

Hi guys.
I'm using Studio Creator and getting crazy about the couple CachedRowSetXImpl and CachedRowSetDataProvider. I've set the command in the project time with one parameter. In the run time I try to set the value into the command and then refresh the data provider. But It doesn't work:
getGlb_usuariosRowSet().setString(1, (String)getTxtUsuario().getText());
getGlb_usuariosDataProvider().refresh();
After this, if I try to see getGlb_usuariosRowSet().getCommand() it returns the original query with the ? parameters without changing.
Thank you

After a long time of work trying to find a solution in the internet, I've discovered what's going wrong with my code. I was attempting to send a Stored Procedure against MySQL through CachedRowSetXImpl's command. This class doesn't support Stored Procedures at all.
Thks anyway.

11.1.06.20 doesn't support drag-and-drop?

One of the major time-saving reasons to use ODT at all is the ability to drag a procedure from the Server Explorer (worked great in Oracle Explorer, what happened to that?) and have the OracleCommand automatically populated with all the parameters, etc. After upgrading to 11.1.06.20 and playign with it in VS 2008, I am very disappointed to see that this is no longer supported.
Are there plans to provide this support in the near future?
PS - Manually configuring all the parameters for all the table ins/upd/del commands is not a reasonable alternative.

Thanks for the response. Your link was indeed helpful and I'm very impressed with the drag-and-drop functionality onto the form. However, this doesn't really solve my problem.
Consider we have a table:
customer (
     customer_id number(14) not null,
     first_name varchar2(30) not null,
     last_name varachar2(30) not null
)We also have an update procedure:
customer_ins (
     in_customer_id in number,
     io_first_name in out varchar2,
     old_first_name in varchar2,
     cur_first_name out varchar2,
     io_last_name in out varchar2,
     old_last_name in varchar2,
     cur_last_name out varchar2
) is
begin
     select first_name,
               last_name
          into chg_first_name,
               chg_last_name
          from customer
          where customer_id = in_customer_id
          for update of first_name,
               last_name;
     update customer
          set first_name = io_first_name,
               last_name = io_last_name
          where custoemr_id = in_customer_id;
     select first_name,
               last_name,
          into io_first_name,
               io_last_name
          from customer
          where customer_id = in_customer_id;
end;This lets us know if another process changed the data while the user was looking at it, and can return that data to the application so the application can make decisions about whether to proceed. It also allows us to return to the application any changes to the data that may have occurred because of triggers.
When I try to set the UpdateCommand on the TableAdapter for my customer table, I can select the correct stored procedure from a list, but it doesn't create parameters for me.
Am I doing something wrong?
I tried adding the update procedure to my data source, and see it's added in a QueriesTableAdapter, but I don't see a way to reference that command from my customer TableAdapter, and the procedure in my QueriesTableAdapter doesn't have any parameters set anyway.
I would very much appreciate any direction.
Thanks

IKEv2 Doesn't support Multiple Peers action to take

Hi,
I have to establish a tunnel from the local FW to a remote FW in L2L
In case of failure of the remote FW, a tunnel has to be opened with the backup remote FW.
I have proposed to use IKEv2
But with following config i get the message: %ASA-4-752009: IKEv2 Doesn't support Multiple Peers
crypto map local-map 30 set peer 22.22.22.22 33.33.33.33
So i have created two crypto maps:
crypto map local-map 30 set peer 22.22.22.22
crypto map local-map 40 set peer 33.33.33.33
The primary tunnel with peer 22.22.22.22 works fine but with the backup tunnel with peer 33.33.33.33
The tunnel IPSEc is up but no interesting traffic enters the tunnel:
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 28, #pkts decrypt: 28, #pkts verify: 28
I have first taken a capture on the inside interface and i see the counter of the access-list incrementing
but when i take a capture on the outside interface, i don't see any interesting traffic.
I have tried the clear crypto command but no way.
Equipment: Cluster of Cisco ASA 5510 at rel 8.4.7
Do i have to reboot the FW or may be the two crypto maps that i have created are not the good solution.
As an alternative if i want to maintain both peers on the same line i can replace IKEv2 by IKEv1.
Best regards.
Andre

Hello Andre, this is a confirmed issue with Cisco. There is an official bug listed as "ENH: Multiple Peers support for IKEv2 CSCud22276" (Cisco customer login required to view bug). See also the Cisco TAC Document "Migration of IKEv1 to IKEv2 L2L Tunnel" with the following quote:
"Multiple peers used for redundancy is not supported with IKEv2 on the ASA. In IKEv1, for redundancy purposes, one can have more than one peer under the same crypto map when you enter the set peer command. The first peer will be the primary and if it fails, the second peer will kick in. Refer to Cisco bug ID CSCud22276 (registered customers only) , ENH: Multiple Peers support for IKEv2."
Here's an excerpt from the Bug Enhancement Request regarding how to work around the issue.
"Either:
1) remove all but one peer from the crypto map
or
2) use IKEv1 instead of IKEv2"
Hopefully this helps, it would be a great feature for Cisco to add for better migration from IKEv1. I guess a more complicated alternative might be to use BGP and multiple WAN connections to have more than one valid path for the same WAN IP of your IPSec IKEv2 peer.

Does Firefox 23.0.1 support frames? p This page uses frames, but your browser doesn't support them. /p

Our webpage used to display perfectly in Firefox now it doesn't. When I view page source the following appears among the HTML: <pre><nowiki>This page uses frames, but your browser doesn't support them. </nowiki></pre>
Our webpage displays perfectly in IE 8.0
''Moderator added tags to show the HTML formatting tags and text.''

You only get the "This page uses frames, but your browser doesn't support them." text if either frames are disabled or you use a browser that doesn't support frames (the text is in a <noframes> </noframes> block). Firefox would display this text under normal conditions.
Note that the Menu object is IE only and doesn't work in Firefox. 
See the Browser Console (Firefox/Tools > Web Developer;Ctrl+Shift+J) for errors. 
The page source also shows red code for the map tag (start tag "map" seen in "table"). 
A lot of images seem to be missing or aren't loaded because of script errors.

Error in allInOne.js: Object doesn't support this property or method

We are having an issue deploy our website (Developed in .Net) on a specific server. When we try to visualize a report on any browser we get this error:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30618; OfficeLiveConnector.1.4; OfficeLivePatch.0.0)
Timestamp: Wed, 7 Apr 2010 17:52:31 UTC
Message: Object doesn't support this property or method
Line: 10
Char: 281690
Code: 0
URI: http://{IP ADDRESS}/WebUserInterface/aspnet_client/system_web/2_0_50727/crystalreportviewers12/allInOne.js
We have install the Crystal reports 2008 runtime and the Crystal report 2008 sp2.5 runtime. Both of them give me the same results.
It's killing me because i have installed the same solution on many other server without any issue.
Ben
P.s. The Web server is a Window Server 2003 R2 standard edition

Perhaps using [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] will at least tell us what dlls are loading. Look at the CR dlls. There should not be any v11 files loaded by your app.
You may also start considering obtaining phone support for this one. I have a feeling this will take more than just forums to solve...
Phone support can be obtained here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

Iwlist scanning gives: Interface doesn't support sc [solved]

When I'm trying to scan for all available networks I get:
# iwlist eth1 scanning
eth1 Interface doesn't support scanning : Operation not supported
My wireless card works fine if I set every parameter manually. I'm currently using the orinoco drivers that came along with ArchLinux.
It seems like that the version of the orinoco drivers installed doesn't support the scan stuff. But building the new orinoco drivers failed with
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_suspend':
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:330: error: too many a rguments to function `pci_save_state'
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_resume':
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:347: error: too many a rguments to function `pci_restore_state'
make[2]: *** [/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.o] Error 1
make[1]: *** [_module_/usr/local/download/orinoco/orinoco-0.15rc2] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.11.3-ARCH'
make: *** [modules] Error 2
So I did try the wlan-ng26 driver downloaded and installed with pacman.
I remove the orinoco modules with
[root@ArchThinkpad orjanp]# modprobe -r orinoco_pci
But when I try to insert the prism2_pci module, it doesn't exist. Why?
[root@ArchThinkpad orjanp]# modprobe prism2_pci
FATAL: Module prism2_pci not found.
Any heads up on what to do?
This is iwconfig before removing the orinoco modules.
[root@ArchThinkpad orjanp]# iwconfig
lo no wireless extensions.
sit0 no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11-DS ESSID:"" Nickname:"Prism I"
Mode:Managed Access Point: 00:00:00:00:00:00 Bit Rate:11 Mb/s
Tx-Power=15 dBm Sensitivity:1/3
Retry min limit:8 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/92 Signal level=-68 dBm Noise level=-122 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
This is lspci
[root@ArchThinkpad orjanp]# lspci
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
02:02.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
This is lsmod before removing orinoco.
[root@ArchThinkpad orjanp]# lsmod
Module Size Used by
radeon 78336 1
ohci_hcd 23048 0
ehci_hcd 36488 0
irtty_sir 7552 0
sir_dev 18636 1 irtty_sir
irda 144184 1 sir_dev
crc_ccitt 2432 1 irda
parport_pc 29252 0
parport 38600 1 parport_pc
rtc 13260 0
pcspkr 4044 0
eepro100 32528 0
orinoco_pci 7552 0
orinoco 44172 1 orinoco_pci
hermes 9472 2 orinoco_pci,orinoco
yenta_socket 23560 0
rsrc_nonstatic 11648 1 yenta_socket
pcmcia_core 51488 2 yenta_socket,rsrc_nonstatic
snd_intel8x0m 19396 0
snd_intel8x0 34624 0
snd_ac97_codec 79224 2 snd_intel8x0m,snd_intel8x0
snd_pcm_oss 56224 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_pcm 98564 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 27268 1 snd_pcm
snd 59492 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10848 1 snd
snd_page_alloc 10244 3 snd_intel8x0m,snd_intel8x0,snd_pcm
i2c_i801 8972 0
i2c_core 23296 1 i2c_i801
usbhid 47744 0
uhci_hcd 33424 0
usbcore 125560 5 ohci_hcd,ehci_hcd,usbhid,uhci_hcd
shpchp 100996 0
pci_hotplug 34760 1 shpchp
tsdev 8256 0
joydev 10560 0
evdev 9984 0
cpufreq_powersave 2176 0
cpufreq_userspace 5680 0
p4_clockmod 6164 0
speedstep_lib 4868 1 p4_clockmod
freq_table 5008 1 p4_clockmod
e100 37760 0
mii 5760 2 eepro100,e100
nls_cp437 6144 1
vfat 14976 1
fat 41884 1 vfat

orjanp wrote:
Thanks.
I installed the 0.15RC1 version of the Orinoco drivers found here.
I rebooted but I still had the 0.13 version. I did a make and make install as the readme file said.
What do I have to do to update the driver?
do you use a PKGBUILD?
update the driver: if it was copied to the right place and the kernel knows about it (depmod -a) it should work
for a start, check under
ls -la /lib/modules/`uname -r`/kernel/drivers/net/wireless/
that your module is installed under the correct location (the orinoco files should be newer than the other ones)
if this is so, make sure you are depmod -a (as root) ... and if even this is ok, then either you are running the new modules or something strange happened

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

3000 J115 7387 - Current BIOS 2NKT31A doesn't support 4gb RAM

I have a Lenovo 3000 Desktop J115 7387-26u and the current BIOS, just downloaded and tested from Lenovo's "support" site, doesn't support 4gb of RAM properly. I have dual 2gb DIMMs, for a total of 4gb, and both Lenovo's PC-Doctor diagnostics and another memory scanner report to me that I have 4gb. See this screen print showing PC-Doctor's RAM report compared to what Windows "sees".
When I boot the system, the BIOS only reports 3006mb RAM is present. Clearly it's recognizing both DIMMs. I've swapped the DIMMs and the results are the same.
Lenovo, PLEASE RELEASE A BIOS that properly supports what the system claims to support!
Message Edited by GeoApps on 04-06-2009 03:00 PM

dhaj1964 wrote:
just to let you know....32 bits systems....can only read 3gigs of memory....64 bits system can read more .....
Two things. First, "just so you know", the Lenovo 3000 J115 7987 is an Athlon 64 X2 (which you would know if you checked the system specs),and second, I'm talking about the BIOS failing to recognize the RAM that the system specs claim it should be recognizing. This is regardless of OS.

How do I get my music from iTunes Match to my older ipod that doesn't support iTunes Match

I have an old ipod ios 4.2 that doesn't support iTunes Match how do i get my music from the cloud to my computer library in order for me to put the music onto my older ipod for the car

Setup iTunes Match on your computer. Download the songs to your iTunes libary and then sync to your old iPod.
http://www.apple.com/itunes/itunes-match/

How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTi

How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTime but don't know how. Says to email website did that but takes me back to same place to email help

Contact iTunes Customer Support, but honestly, there are no returns for iTunes purchases.

AAE doesn't support parameterized mapping ?

Similar Messages

Maybe you are looking for