Abap proxy settting in business system side

Hi all;
I am trying to activate abap proxy environment at the business system(640) with the web blog document https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3022. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
but i am still getting "no connection to integration builder" when SPROXY at the r/3(640).
according to some article, i have to maintain exchangeProfile at the r/3 side, but i could not get into business system with 50000port exchangeProfile, but 8000port is available.
so is it right? i have to maintain exchangeProfile at the business system(r/3).
result of some test is below;
1. sldcheck is no problem. - no problem.
2.Check/maintain with report: SPROX_CHECK_IFR_ADDRESS
3.Check with report SPROX_CHECK_HTTP_COMMUNICATION
4.Check with report SPROX_CHECK_IFR_RESPONSE
5.Check with report SPROX_CHECK_IFR_CONNECTION
number 2, SPROXYSET TABLE is empty value
In Exchange Profile http://sapxi.hh.net:50000/rep
In Table SPROXSET
Status OK: Address maintained
number 3, result
HTTP communication functioning
number 4, i got error "HTTP error(return code 400, message "ICM_HTTP_CONNECTION_FAILED").
number 5, i got error "Integration Builder data not understood"
please guide me in order to activate connection to integration builder.
thanks in advance
venjamin

Hi Venjamin -
Can you confirm a few things first:
1. In SXMB_ADM of R/3 goto Integration Engine Configuration. Is Role set up as Application System and do you have a value for Corresponding Integration Server? If so, please paste that value here.
2. In SM59, for the HTTP destination pointing to your Integration Server, what is the result of your connection test? You should be getting something like "HTTP/1.0 500 Empty HTTP request received" at the top.
3. Also in SM59, do your test connections work for both LCRSAPRFC and SAPSLDAPI?
4. Is your R/3 system a unicode system or non-unicode system? Have the LCRSAPRFC and SAPSLDAPI destinations on both the abap and j2ee side been configured accordingly?
By the way, there is no exchangeProfile for R/3...
Regards,
Jin

Similar Messages

ABAP Proxy creation in BI system

Hi
I am trying to PUSH data from BI to PI , In which I am using ABAP Proxy.
To activate this I am following the below blog
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
In this they are trying to change the setting which are critical where the pipeline address is assiged to the IS_URL . see the below setting from the blog.
"2. Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
5. Under Specific Configuration Data you can specify additional configuration data
   1.Select the relevant category under Specific Configuration Data.
   2.Choose Change Specific Configuration Data.
   For ABAP Proxies, Add the following configuration:
     1.Category RUNTIME
     2.Parameters: IS_URL
     3.Current Value: dest://SAPISU_XID
I am afraid will this effect any problem if I change any standard setting.
Please confirm this if any one had already done this,
Regards
Shurk..

Hi,
I have done this and there is no problem at all.
Just go ahead.
Just make sure RFC connection which you have created in step 1 is working fine.
Regards,
Sarvesh

ABAP proxy with Multiple PI system and Single SAP ECC

Hello Folks,
In my current project i have 2 SAP Pi system, PI7.0 and PI7.11. Currently 80% of the interfaces are on PI7.0 and we are planning to move interfaces to new PI7.11 next year. Old environment has lot of ABAP proxies ECC is configured to send data to it.
All the new developments will be done in new SAP and i need to use SAP PI7.11 for that. I have an interface where i need to use ABAP proxy.
How can i configure ECC so that it sends new ABAP proxy interface data to new PI7.11 and old proxies to old PI7.0.
As far as i know we can make ECC point to one integration server at one time. Any thoughts or suggestion ?
Regards
Inder

Hi,
Multiple connection to ESR in sproxy can be done by switching host value in RFC destination SAP_ESR_PROXY and for maintaining multiple PI runtime you should use subparameter for parameter SXMB_ADM->Runtime->IS_URL (you can define combination of Sender/Receiver for subparameter in transaction SXMSIF).
This way for every sender/receiver combination you can use different integration server.
Regards,
Gourav

Proxy Runtime for Business System not visible in RWB.

Hi,
We are running SAP PI 7.10 SP7.
The current landscape contains currently 2 SAP R/3 application systems and 1 SAP PI systerm that are all registered with the SAP PI SLD.
There is Business Systems configure for both the Application systems in the SLD from the registration.
In the ID it was possible to import these Bussiness systems and to use them in scenarios. It is even posible to post messages to both IE on these Business Systems. If tcode SPROXY is executed on both these business systems then it connects to the same ESR. On both business systems I have created a "PIRWBUSER" with the same password and roles as on SAP PI.
Now my ploblem is that I only see one proxy runtime in the RWB under Integration Engines.
Please can you assist in this matter?
Regards
Willie Hugo

Hi,
The problem is solved with patches to the following JAVA components.
MESSAGING 7.19
SAP_XIAF7.17
SAP_XITOOL7.14
Regards
Willie Hugo

Finding messages sent through ABAP proxy in the source system

Hi All,
I have a Proxy to HTTP scenario, wherein the messages are landing up in error at reciever for some value in the payload.
I tried to look for the messages in XI, hwever they have been successful thru it and are deleted now.
Also I tried to look for the messages in the sender R/3 system in SXI_MONITOR, hwever i dont have the access to this tcode there.
Is there any other way these messages can be looked for in the R/3 system?
Regards,
Diptee

Hi All,
I could not find the messages in the source system, they seem to have got deleted (as they are old).
Also i was trying to achieve the requried in the production environment, and so needed to know if the messages can be looked for by any means other than the report 'Monitor for Processes XML messages'.
Thanks a lot.
regards,
Diptee

Activating ABAP Proxy between business system and XI

I have a question on the release of XI Add-on we need to install on the Business system side for activating ABAP Proxy. We are using XI 3.0 system and want to activate the ABAP Proxy between XI 3.0 system and the R3E system running on WAS 620 SP 45.
I read an excellent SDN Blog from Vijaya Kumari on how to activate the ABAP Proxy. It lists XI Add-on installation on the business system. The XI Add-on (SAPK-20006INAPPINT SP06) is what the XI 3.0 configuration guide refers to in OSS note 439915. Is there a newer XI Add-on to go with XI 3.0 system?
Thanks,
Asif

Hi Asif -
SAPK-20006INAPPINT(SP06) is the latest XI add-on (APPINT 200_620) available. Since your WAS 620 is on (SP45) and the prerequisite for SAPK-20006INAPPINT(SP06) is SAPKB62043, your system looks ready. But of course, refer to the mentioned Note - 439915.
>>><i>Is there a newer XI Add-on to go with XI 3.0 system?</i>
I'm not sure if this is the right question. Any Web AS 6.20 system will require the XI-add on to communicate to XI (2.0 or 3.0) - specifically regarding proxies. WebAS 6.40 systems do not require the add-on.
Let me know if you need any clarification.
Thanks.
Jin

Change Business System for Java Proxy Client

I have created Web AS Java business system for Java proxy.
Is it possbile to send message from client Java Proxy as another business system (Third party)?
For example to specify this system
MessageSpecifier messageSpecifier = proxy.$messageSpecifier();
messageSpecifier.setSenderService("MY_BUSINESS_SYSTEM");
proxy.$messageSpecifier(messageSpecifier);

Yes, it is.
That's the way to do it.
Stefan

Naming changes for SAP business systems

Hello
I have developed my interfaces in which most of them are from SAP to third party. We have SAP configured with its SID as the business system (e.g. DC1). Now we are planning to change the name of all the business systems in SLD. I deleted the previous business system from the SLD and created the new one according to newer standard and configured receivers based on it.
My problem is when I am posting the message through ABAP proxy its still taking the SID as the sender. As a result its not finding the receiver. Do I need to configure the sender in my source ECC system?
Thanks in advance.
Regards
Rajeev Patkie

Hi Rajeev,
The Business system details like the client and logical system etc, help the proxy to know where it has to go.
Not for the sender system from where you are executing the PRoxy will have a Business system .Please check if the information is for the Business system can be seen correctly in the ID>BS>service-->Adpater specific identifiers.
Also you sender XI adapter is attched to this Business system.
No what is your receiver? You haven't specified that?
Also, you can just reactivate the PROXY once.
Cache refresh??
Regards
Vijaya

File to ABAP Proxy Scenario

Hi All,
I am doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can u plz tell me why this error is occurring and how we can resolve this error.
Thanks & Regards,
Vikas

Hi Vikas
make a dummy change and activate your object then make a full refresh
you can make it through in 3 ways
1) tcode SXI_CACHE
2) go to ID -> environment and make a full cache refresh
3) http://<host>:5<sys#>00/CPACache/refresh?mode=full Full CPA cache refresh
when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
while full cache will delete this temporary object and make this cahe into runtime
hope this will help you
thanks
sandeep
if helpful reward points

ABAP Proxy Generation on Interfaces with GDTs

Hi all,
I created an aggregated data type with references to data types listed under the SAP GLOBAL SWCV within the namespace for the GDTs.
When I now try to generate an ABAP proxy in my backend system, I always get an error that these types cannot be generated because they have an other namespace.
Well, this message sounds logical for me, because this GDTs have to reside within an other (super) package(?), but how do I have to proceed with that?
From my point of view the GDTs delivered by SAP should already be generated within the ABAP Stack of the backend systems or they have to be automatically generated within a special package. When I try to generate it the system additionally wants to generate the GDT type references also with the custom prefix.
Does anyone have a good explaination on that?
Thanx
Olli

Hi Ollie.
Have you got a link to somewhere where they mention this component?
The problem I have with this is that there is business related content in the SAPGLOBAL SWCV. If you browse it you will see some Employee data types which relates to CRM systems. If you install this component on let say a SRM box what will it do with these "unrelated" business types.
Will these types be generatable?
Questions, questions...and finding answers is nearly impossible.
Anyway, what we did is to develop a Custom Common component which contains only datatypes. All other SWC's has this component as a dependancy. When we developed a new interface we would look for the datatypes in the SAPGLOBAL SWC (or the catalog) and copy it to the Common component.
We would then use the data types in the Common component to build the freeform data types in the other SWC's.
This way you still have only one place to maintain the global data types (in the common component).
Nice to share ideas.
Rod

How to call abap proxy at run time?

hello frnds,
i m working on a scenario in which whenever Invoice is saved in SAP R/3 at that time same data should go to Oracle DB. i m using ABAP proxy on SAP R/3 side and JDBC receicver adapter on oracle side of XI.
so to post data i need to call ABAP Proxy whenever invoice is saved.. i have tried to find out save event for invoice but not able to get... can anybody tell me the solution that how i can call proxy at run time?
thanx in advance.
Regards,
Hetal.....

Hi Audumbar,
Check these ...
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vanita.thareja2/blog/2006/05/23/bpm-sending-message-asynchronously-and-getting-the-response-from-synchronous-system-using-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
cheers,
Prashanth
P.S Please mark helpful answers

PCK XI adapter - ABAP Proxy to File Scenario How to?

Hi there,
We want to implement the following sceanrio; SAP ABAP outbound proxy to Flat-File scenario. A (sender) SAP system will trigger an outbound proxy which will send outbound data to a (receiver)file system via the PCK and Central Integration Server.
SAP (ABAP proxy) -> PCK-> XI -> File System
My question is; The PCK documentation suggests that the XI adapter included in the PCK can only be used to send/forward messages to the central integration server.
Does that means that one cannot use the same XI adapter on the PCK to redirect ABAP proxy messages to the Integration server?
Thanks,
Roberto

The PCK cannot be used as a replacement for XI Integration server. PCK is only a type of adapter engine that can run independantly. It is intended for partners who cannot use XI server. So PCK can not in itself execute interfaces. It can just forward all the messages received to the XI Integration server. PCK can only run your sender or receiver adapter all the mappings can only be executed on the integration server. So PCK just converts from the native format to XI format and forwards to the Integration Server.
Hope that carifies your question .
Thanks,
Kalyan Musunuri

How to Remove Business System From SLD

Hi Experts,
I Created Business System For Web As ABAP.
While Removing Business System From SLD Means I am Getting the Following Error.
java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:362) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:129) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:344) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:355) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:298) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please Let me know How to Remove it from SLD.
Regards
Khanna

HI Khanna
Delete the Business System in your IR and ID, if any interfaces are developed under this BS.
See if any items in locked state...and also after deleting it...activate it and refresh the cache. this shud help
If you deleted from everywhere then it should not give that message.
Try after refresh cache using SXI_CACHE.
Finally Delete the BS from SLD
In general , that to be you are facing this type of problem only inthis situation , then you have to refresh SLD cache.
See the below link
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

Abap proxy 2 soap

Hi,
this scenario is abap proxy 2 soap ,, , source system send some data to target webservice and target webservice return approval number.
I checked target url and soap action in receiver soap adapter, and those value is correct.
on sxmb_moni
i got NO_MAPPINGPROGRAM_FOUND
http://test.test.com/pt/ses001/approvalprocess SES001_IM does not exist in runtime cache</SAP:Stack>
and Applicatoin Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
here is Sent message log on MDT.
2006-08-29 13:25:37 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
2006-08-29 13:25:37 Success SOAP: response message leaving the adapter
2006-08-29 13:25:37 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-08-29 13:25:37 Success Trying to put the message into the send queue.
2006-08-29 13:25:37 Success The response message for message 44f23177-e6ed-0270-0000-000046028211(INBOUND) was successfully transmitted to the calling application.
2006-08-29 13:25:37 Success The message status set to DLVD.
2006-08-29 13:25:37 Success The application sent the message asynchronously using connection AFW. Returning to application.
here is Receive message log on MDT.
2006-08-29 13:25:37 Success The message was successfully received by the messaging system. Profile: XI URL: http://xi0034:50000/MessagingSystem/receive/AFW/XI
2006-08-29 13:25:37 Success Using connection AFW. Trying to put the message into the request queue.
2006-08-29 13:25:37 Success Message successfully put into the queue.
2006-08-29 13:25:37 Success The message was successfully retrieved from the request queue.
2006-08-29 13:25:37 Success The message status set to DLNG.
2006-08-29 13:25:37 Success Delivering to channel: R_TEST_SOAP_SSS001
2006-08-29 13:25:37 Success SOAP: request message entering the adapter
2006-08-29 13:25:37 Success SOAP: completed the processing
2006-08-29 13:25:37 Success SOAP: response message received 6bc3e4d0-3716-11db-a265-00145e483080
2006-08-29 13:25:37 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
i can see source data on sxmb_moni.
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:APPROVALREQ_SES_MT xmlns:nr1="http://test.test.com/pt/ses001/approvalprocess">
<TITLE>46</TITLE>
<GUBUN />
<REQUESTOR>46</REQUESTOR>
<TEXTLINE>SAFSAFSAFDSAF</TEXTLINE>
</nr1:APPROVALREQ_SES_MT>
request message mapping of request
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws">
<args1>46</args1>
<args2>46</args2>
</ns1:ApprovalRequest>
I can not see any return value comming from target webservice on sxmb_moni.
request message mapping error on response
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
payload of request message mapping of response
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
<ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">ibmr52</ns2:hostname>
please check what was my fault.
thanks
venjamin

Hi Bhavesh.
thanks for the note.,,
please look at the bottom of this content.
i can not see "Method=Approval" between jws and args1 even though i set SOAP Action = Approval on Receiver SOAP Adapter.
is this happening something wrong? or is it normal log?
<?xml version="1.0" encoding="UTF-8"?>
<ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws"><args1>333</args1><args2>333</args2></ns1:ApprovalRequest>
SAP_512dbe91-372d-11db-b291-00145e483080_END
here is detail message log on MDT.
--SAP_512dbe91-372d-11db-b291-00145e483080_END
Content-ID: <[email protected]>
Content-Disposition: attachment;filename="[email protected]"
Content-Type: text/xml; charset=utf-8
Content-Description: SOAP
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header>
<sap:Main xmlns:sap='http://sap.com/xi/XI/Message/30' versionMajor='3' versionMinor='0' SOAP:mustUnderstand='1' xmlns:wsu='http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' wsu:Id='wsuid-main-92ABE13F5C59AB7FE10000000A1551F7'>
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>synchronous</sap:ProcessingMode>
<sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId>
<sap:TimeSent>2006-08-29T07:10:08Z</sap:TimeSent><sap:Sender><sap:Party agency='' scheme=''></sap:Party>
<sap:Service>BS_SAPR3_SSS0017</sap:Service></sap:Sender><sap:Receiver>
<sap:Party agency='' scheme=''></sap:Party><sap:Service>BS_MMM_D</sap:Service></sap:Receiver>
<sap:Interface namespace='http://sds.samsung.co.kr/pt/sessingle001/approvalprocess'>APPROVALREQ_MMM_IB</sap:Interface>
</sap:Main><sap:ReliableMessaging xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
<sap:QualityOfService>BestEffort</sap:QualityOfService></sap:ReliableMessaging>
<sap:Diagnostic xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
<sap:TraceLevel>Information</sap:TraceLevel><sap:Logging>Off</sap:Logging></sap:Diagnostic><sap:HopList xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
<sap:Hop timeStamp='2006-08-29T07:10:08Z' wasRead='false'><sap:Engine type='BS'>BS_SAPR3_SSS0017</sap:Engine>
<sap:Adapter namespace='http://sap.com/xi/XI/System'>XI</sap:Adapter><sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId><sap:Info>3.0</sap:Info></sap:Hop>
<sap:Hop timeStamp='2006-08-29T07:09:06Z' wasRead='false'>
<sap:Engine type='IS'>is.00.xi0034</sap:Engine>
<sap:Adapter namespace='http://sap.com/xi/XI/System'>XI</sap:Adapter>
<sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId><sap:Info>3.0</sap:Info></sap:Hop><sap:Hop timeStamp='2006-08-29T07:09:08Z' wasRead='false'>
<sap:Engine type='AE'>af.sxd.xi0034</sap:Engine><sap:Adapter namespace='http://sap.com/xi/XI/System'>XIRA</sap:Adapter>
<sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId></sap:Hop></sap:HopList></SOAP:Header><SOAP:Body>
<sap:Manifest xmlns:sap='http://sap.com/xi/XI/Message/30' xmlns:xlink='http://www.w3.org/1999/xlink' xmlns:wsu='http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' wsu:Id='wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7'/></SOAP:Body></SOAP:Envelope>
--SAP_512dbe91-372d-11db-b291-00145e483080_END
content-id: [email protected]
content-type: application/xml
<?xml version="1.0" encoding="UTF-8"?>
<ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws"><args1>333</args1><args2>333</args2></ns1:ApprovalRequest>
SAP_512dbe91-372d-11db-b291-00145e483080_END
thanks
venjamin
Message was edited by: venjamin

Call ABAP-Proxy with SOAP adapter?

Hi all,
for a PI7.1-scenario I would like to use the Lookup-API in mapping. As I know I can use either RFC or SOAP channels, however I would rather call an ABAP-Proxy in my backend system instead.
So my question is: Is it technically possible to use the SOAP-adapter to call an ABAP-Proxy?
Your help would be appreciated, best regards
David

Hi Stefan,
Interesting answer here and one that has got me curious. Hope you can help.
1. When you say it is going to be possible to call a ABAP proxy using a UDF in the mapping of XI ( Lookup ), would it be using the WS Adapter of PI 7.1?
2. If 1 is yes, is there a new API code to do this, or is it the same lookup code as used previously in XI 3.0 and PI 7.0 Days?
3. If 1 is no, can you explain maybe a little more on how this would be possible using the standard SOAP adapter of XI?
Thanks a bunch.
Regards
Bhavesh

Abap proxy settting in business system side

Similar Messages

Maybe you are looking for