Access the Attributes and Actions tabs in AME

Hi All,
I am trying to setup the approval process using 'Oracle Approval management'. But I am unable to access the Attributes and Actions tabs in the application.
Can someone help me how to resolve this issue ? Is there any profile option or setups to be done ?
Regards
Jhansi

Are you on 11.5.10?
Which responsibility you are using?
On 11.5.10 try with AME Application Administrator responsibility.

Similar Messages

Why can't I access the "webpage" and "bookmarks" tabs in Safari on my iPad2?

Sometimes when I'm using Safari, I can't access other webpages that I already have open. I click on the tab multiple times, but I stay on the current page. I also can't access any of my bookmarks (basically, none of the buttons next to the search bar work for me).
I essentially have to wait until the browser crashes, and then everything works normally. What is going on?!

See if any of these things make a difference.
Quit Safari and restart the iPad - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

How can I access the Attribute Values from the Search Region

Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjith

you could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth

HT201269 why is it that when trying to use a back up of my old iphone i click on devices and the options are all frey scaled? I cannot access the restore and back upo options

why is it that when trying to use a back up of my old iphone i click on devices and the options are all frey scaled? I cannot access the restore and back upo options

Let me start with the general advise...
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

How to access the attributes from a method

Hi,
Thanks to all who replied to my previous thread. Please let me know how to access the attributes in method of component controller in the view.
Let Component_method be my method in component controller which contrains few attributes like this
method component_method.
data : node1 type ref to if_wd_context_node,
        itab type standard type of mara.
endmethod.
I want to access the above attributes in method of view.
method view1.
wd_comp_controller->method_component( ).
????? how to access the data of the method_component?
endmethod.
Kindly help me out in the syntax.
Rgrds
Mahathi

Hi mahathi
You should define the parameters in the header, not in the body of the method:
You can define it as importing, exporting, changing or returning, as you need. For example, in SE80
Parameter             Cl.declar.          RefTo        Opt        Type ref
node1                    importing            X                          if_wd_context_node
itab                       exporting                                        mara
method_component().
" code here...
endmethod.
and when you have to call the method,
wd_comp_controller->method_component(
                EXPORTING     node1 = nodelocal   " not importing!!!
                IMPORTING      itab   = itablocal      " not exporting!!!
i think that it's this what you want, don't i?

Why can one mac access the internet and not the other?

Hi I have just installed a 2nd generation Airport Express base station. I have setup a network and I can connect to it to access the web. Here's the rub, only my Macbook Pro can connect. My Macbook Air cannot connect? A weird error message says (translated from Swedish): Airport has the selfapplied/selfselected IP adress 169.254.67.130 and will not be able to connect to the internet.
Why can one mac access the internet and not the other? Is there something simple that I can do to get more macs to be able to use my Airport Express to access the internet?
Tech details:
Airport Express 2nd generation (just purchased) model 1392
Macbook Pro running 10.8.2
MacBook Air running 10.6.8

It seems the Airbook assigns a dummy IP address so somehow it doesn't reach and receive an IP from the Express. I deleted the previous Express setting restarted the Air connected again, restarted the modem, restarted the Express nothing....
I spoke to the internet provider and the cable modem does not require any username or pw. from the modem to the cable it's one public ip, pure internet is flowing from the modem to the Express but the express doesn't seem to assign any IP address apart from the one assigned to the Macbook Pro.
Do you need a screendump of the settings on the functioning Mac or the faulty one? What settings are you interested in i.e. which tab should it shot?

After upgrading to the latest version of firefox. I can no longer access the internet and all traces of Mozilla Firefox are gone from my computer. I have no access to the internet, my home page or my e mails. What can be done??

I have been using firefox for years. I downloaded the latest version and at the conclusion of the down load I was refussed access to the internet. Something about Proxy???? I checked my firewalls and security and they said that mozilla was allowed but everytime I attempt to gain access I am refused. I cant access the internet and I cant download another program to access the internet. I uninstalled Firefox and attempted to reinstall but after uninstalling Firefox I have no means to reinstall because there are no traces of it on my computer and I no longer have access to the internet. What do I do? I cant access my e mails, stored messages, favorites etc etc.

No. After I select "Choose" the dialog box expands to provide only three choices. This is a new bug. I have only seen it in the past week or so, but it is maddening. I have observed that, while the Mozilla Foundation focuses on trivialities like which search engine should be the default, the Firefox application becomes buggier and buggier. Most of my family has switched to Chrome, and I will be following shortly. Firefox used to be a great program. Not any more. Getting assistance with a problem has also become very difficult.

Why can't I access the internet and e-mail on wifi in my house, but, I can if I turn wifi off?

Why can't I access the internet and e-mail on wifi in my house, but, I can if I turn wifi off?

Hello srpeters5,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone. You have taken some really good steps to troubleshoot this issue already. I found an article that includes a few additional steps you can try. You can skip any steps you have already taken.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am not able to access the "featured" and "top charts" in the app store

I am not able to access the "featured" and "top charts" icons in the app store. Everything else works fine.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

My iPhone 6 was stolen and i got it back, but the pass code was changed and so was the touch-id. and now im locked out of the phone because ios 8.1 requires either of the passwords to access the phone. and iTunes doesn't recognize it so i cant restor

My iPhone 6 was stolen and i got it back, but the pass code was changed and so was the touch-id. and now im locked out of the phone because ios 8.1 requires either of the passwords to access the phone. and iTunes doesn't recognize it so i cant restore it at all PLEASE HELP

Take it to an Apple Store, take proof of purchase with you.

There was a problem connecting to the server "my server.local" this file is available on your computer. Access the files and volumes locally.

Hi,
I have a strange problem connecting one of the office laptops (Macbook Pro 10.7) to the disk in the Apple Time Capsule. It's just one laptop that has this problem and the other 3 no problems at all and they all run OS X 10.7 Lion, I can access the Time Capsule disk over WAN on all machines but locally on the problem machine i get this message "There was a problem connecting to the server "myserver.local" this file is available on your computer. Access the files and volumes locally." Now from this message it sounds like the problem laptop thinks the network drive (Time Capsule) is the same as it's self in the way of name or address however they clearly have different IP addresses locally.
Any ideas on this would be apreciated as I can only think a clean install but don't want to do this if not necessary.
Thanks
Jarrah

I think I gave you some bad info in the above, where i enterered the text "myserver.local" & "example.local" this was the host name of the server (Time Capsule) so not local on the computer.
No i didn't try your method, I'll give it a go - I thought the folder option was for local files and not on a server ?

Smb. Access the volumes and files locally. all lies!

I want to connect to a windows box which has sharing enabled. I was doing this yesterday and it was fine. Today, Mavericks has thrown in the towel and decided to think different.
What I normally do is CMD-K and connect to the server. I'll type it in - smb://tardproof - but it can't do it.
So I'll try connecting to it by it's known, fixed IP address - smb://192.168.0.107 - and ...
Hmm, that's strange. Since the mac clearly thinks it *can* see it on the network, otherwise why would it be listing it in the finders' "Shared" area? I mean, that's an automatic thing and not something you can command-drag out like normal locations...
ok.. so if I try to click on it there ...
Maybe it's authentication. I'll "Connect as ..."
Dang! Ok, lets think about this. Maybe it's SMB playing up. I know, I'll connect forcing SMB1, since I know Mavericks now defaults to v2.
and
Dang! (again). No, wait, the message has changed. "Access the volumes and files locally." Sweet, let me just
I'm sorry, where?
hmm, lets just check this out
so ok, there's definately nothing there in /Volumes, but I know I can ping it. Let's have a look from the other end - can Windows see my mac?
Yep. All good there. So we have a single direction smb system, in the exact opposite than I need.
Dang!

This has been happening repeatedly and has been reported to the hosts in the Lounge. They "are working on a fix."

Are my iCloud photos stored? I lost phone abroad and want to access the photos and save them to my iPad.

are my iCloud photos stored? I lost phone abroad and want to access the photos and save them to my iPad.

Photo stream photos remain in iCloud for 30 days, and can be accessed by enabling my photo stream on another iOS device or computer. Shared streams remain in iCloud indefinitely, and can be accessed by enabling Photo Sharing on an iOS device or computer. Your camera roll photos are included in your device backup. Restoring the backup to another iPhone or iPod touch should recover them (unfortunately, you can recover them by restoring an iPhone backup to your iPad). If the backup is an iCloud backup be aware that Apple will delete it after 180 days of inactivity so you'll want to restore the backup prior to that.

Messages displayed in the Approval and message tab in SRM approval is same

Hi,
We are having an issue with the message displayed in the approval step.When we click on the approval option in SRM, we get two tabs displayed Approval and Messages. The content displayed in both the tab is same for one user. Generally the content displayed in approval tab is "Here you can approve/reject shopping carts, confirmations of goods receipts, and so on.Select 'Edit' to display details" and the details in Messages tab is "Here you can see e-mails on the purchase transaction." But for this particular user the content displayed is "Here you can see e-mails on the purchase transaction." in both the approval and message tab.
We checked the roles and profiles and its same as the other users. Can some one please suggest what would be the reason for this functionality with this user.
Regards
GGL

OK, so you only have this problem in PROD, all other systems (DEV, QA) are fine... I assume you checked your BAdI transports in PROD as well... If all OK, that leads me to think there's nothing wrong with your custom code or transports.
SRM 5.0 is notorious for these kinds of issues where workflow templates work in one environment, but are erroneous in another (most times this is due to inactive status). That is why I asked you to check the workflow for consistency in SWUD.
From your answer, I did not understand whether you'd checked all the subworkflows separately in SWUD (not as part of the main workflow check). If you didn't do that, find all the subworkflows (and the subworkflows of the subworkflows where applicable) in SWDD by stepping through the main workflow, and then run the SWUD check on each of them separately.
Also, please check the Review workflow WS10000265. This particular workflow may not show in SWDD as a subworkflow, but actually is part of the process. If it's broken, you may encounter issues like you're describing.
Cheers,
Serguei

The server is available on your computer. Access the volume and files local

I recently did a clean install on my MacBook (from Leopard to Snow Leopard) and got this error when attempting screen sharing. I provide limited support at my office and do that primarily through screen sharing. One thing I noticed after the install was not only could I not screen share with anyone on the local network, but if anyone tried to connect access my shared folder it would actually open the shared folder of another computer on the network.
Whereas Screen Sharing would simply time out if I attempted to connect to the majority of computers on the network. However, when I tried connecting to the machine whose shared folders would open if someone tried connecting to my computer, I got the "Connection failed. The server is available on your computer. Access the volumes and files locally." error.
After performing a hard reset on our Airport Base Station I am now able to screen share with the other computers on our network EXCEPT for the one that gave me the error in quotes above. Any ideas?

Hi,
I also encountered this error but in a different situation : after having restored my Lion installation from a Time Machine backup, everything was okay except that I couldn't connect to any disk attached to my Airport extreme.
I searched for hours and even restored my backup a second time. The problem is specific to only one client since my Macbook was still able to connect to the AE. I ended up resetting all the settings on the AE and restoring them one by one.
The problem appears when I restore the address range distributed by the AE's DHCP server to the one that was configured before.
Thus the solution seems to change this address range. Must be something related to a network route or cache or anything like this.
I hope it will help anybody who encounters this problem. Luckily it seems there are very few : the number of occurences of this problem in google is very low.
Matt

Access the Attributes and Actions tabs in AME

Similar Messages

Maybe you are looking for