Accessing list of DISPLAY objects in a table component.

Hi there,
I am using a class that extends ObjectListDataProvider to populate a JSF table component.
I need to access the list of objects that are actually displayed currently in the table. The table uses pagination so there are other table elements not displayed and I do not want those.
Can someone help me?
thanks

Hello,
I've been working with this method and it works good with pagination as far as you do not start to sort the table... it starts to append new rows at the end.
The only workaround I've found so far is to call clearSort() before getting the ids... but that is just partially nice...
So, maybe I'm doing something wrong or maybe there is a bug that could be fixed in 1.2?
Regards,
Rob

Similar Messages

  • Iterating thru an array list and displaying it on the table.

    Hi All,
    I have done table binding.
    Say if I have a list of values(pojo's) in the request scope. I need to iterate thru the list and display the attributes enclosed inside the pojo on a JSF page.
    How do I achieve it?
    Thanks
    - Gana.

    Hi,
    it depends on what you mean by "I have done the table binding". A Pojo can be used as the base for a data control, which then can be bound to a table through this (using ADF).
    If you want to copy values to a table, you can access the binding container in a managed bean (you didn't tell the technology you use so i assume JSF). Check SRDemo on how to access the binding container in a managed bean (see SRMain for example)
    Frank

  • Access list with multiple object groups

    Hello Everyone,
    I am using a cisco ASA 5525 with 8.6 code.  I am trying to setup access list for oubound access meaning hosts accessing the internet.  I have created an access list called outbound_access and did "access-groupc outbound_access in interface inside "
    I am trying to use object-groups where ever i can.  Here is an example.
    object-group service obj_Meraki_outbound
    service-object tcp destination eq 443
    service-object tcp destination eq 80
    service-object tcp destination eq 7734
    service-object tcp destination eq 7752
    service-object udp destination eq 7351
    object-group network obj_Meraki_lan
    network-object 10.2.11.0 255.255.255.240
    network-object 10.5.11.0 255.255.225.240
    object-group network obj_Meraki_pub
    des This group lists all hosts associated with Meraki. 
      network-object host 64.156.192.154
      network-object host 64.62.142.12
      network-object host 64.62.142.2
      network-object host 74.50.51.16
      network-object host 74.50.56.218
    object-group service obj_Meraki_outbound
    service-object tcp destination eq 443
    service-object tcp destination eq 80
    service-object tcp destination eq 7734
    service-object tcp destination eq 7752
    service-object udp destination eq 7351
    object-group network obj_Meraki_lan
    network-object 10.x.x.x 255.255.255.240
    network-object 10.x.x.x 255.255.225.240
    object-group network obj_Meraki_pub
    des This group lists all hosts associated with Meraki. 
      network-object host 64.156.192.154
      network-object host 64.62.142.12
      network-object host 64.62.142.2
      network-object host 74.50.51.16
      network-object host 74.50.56.218
    I have tried tying all these groups together in multiple ways but cannot figure out how to do this.  This what i think it should be "access-list outbound_access extended permit object-group obj_Meraki_outbound object-group obj_Meraki_lan object-group obj_Meraki_pub"
    What i want is the use the service objects and the source network would be obj_Meraki_lan and destination would be obj_Meraki_pub.   It seems the rules completely change when you use object groups.  Can someone explain this maybe with a few examples.  I am already using object groups in many acls but not for every element.
    Thanks

    Hi,
    Seems to work on my test ASA
    Attached it to my current LAN interface.
    ASA(config)# packet-tracer input LAN tcp 10.2.11.1 12345 64.156.192.154 80
    Phase: 1
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   0.0.0.0         0.0.0.0         WAN
    Phase: 2
    Type: ACCESS-LIST
    Subtype: log
    Result: ALLOW
    Config:
    access-group outbound_access in interface LAN
    access-list outbound_access extended permit object-group obj_Meraki_outbound object-group obj_Meraki_lan object-group obj_Meraki_pub
    object-group service obj_Meraki_outbound
    service-object tcp destination eq https
    service-object tcp destination eq www
    service-object tcp destination eq 7734
    service-object tcp destination eq 7752
    service-object udp destination eq 7351
    object-group network obj_Meraki_lan
    network-object 10.2.11.0 255.255.255.240
    network-object 10.5.11.0 255.255.255.240
    object-group network obj_Meraki_pub
    description: This group lists all hosts associated with Meraki.
    network-object host 64.156.192.154
    network-object host 64.62.142.12
    network-object host 64.62.142.2
    network-object host 74.50.51.16
    network-object host 74.50.56.218
    Additional Information:
    access-list outbound_access line 1 extended permit tcp 10.2.11.0 255.255.255.240 host 64.156.192.154 eq www (hitcnt=1) 0x4d812691
    Also have used such configuration in some special cases where the customer has insisted on allow specific TCP/UDP ports between multiple networks. And nothing is stopping from adding ICMP into the "object-group service" also.
    - Jouni

  • Trouble displaying referred value in Table component

    My need:
    I have a database table (call it Table A) that I'd like to display, row-by-row, but I have several columns (say, columns 1 and 2) that store integer values which, in turn, reference lookup tables (call them Tables B and C). Rather than display the integer values from Table A's columns 1 and 2, I'd like to substitute the equivalent String values from lookup Tables B and C in my visual Table component.
    What's the best way of achieving this? I currently retrieve data from a simple CachedRowSet stored in my SessionBean1 (it's just a SELECT * from Table A), but I suppose I could create a new CachedRowSet that joins to Tables B and C for the values in Table A's columns 1 and 2.
    Is there a better (maybe even simpler and more elegant) way?

    You could right-click on the rowset in the Outline window and choose Edit to open the query editor. You can drag in tables B and C, and elminiate any columns you don't need.
    You can have several dataproviders bound to this rowset, and tables bound to the dataproviders. You can choose which columns to display in each table.
    See http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/databoundcomponents.html
    Chris

  • Need ALV LIST for displaying Dynamic Internal Tables

    Hi Guys,
                     I have some thing like 2 Dynamic internal tables.
    Say 1st Internal table will be filled based on some condition.
    say 2nd table will be filled based on some condition.
    When appending the 1st Internal table, if that internal table is filled it creates another internal table of same kind and continues so on until some condition.
    In the same way when appending the 2nd Internal table, if that internal table is filled it creates another internal table of same kind and continues so on until some condition.
    My requirement is I need to display all these Internal tables in the output.
    The output should look something like
    1st Internal Table
    some gap
    2nd Internal Table
    some gap
    so on...................
    Is there any standard ALV List, to display all these Internal Tables in such a way.
    Thanks,
    Prasad.

    Hi.
    One thing more here is code which get 10 records from 2 tables and then show them in ALV.
    first when u execute it will show data from ist table.
    when u go back (F3) then it will sow data from 2nd table.
    But if u want to show both ALV on the same screen then u will have to use screen programin and using class u will have to create container and then have to do it.
    But as i above mentioned. that sample code is as below.
    REPORT ztn_test LINE-COUNT 100.
      data: itab_ref type ref to data.
      data: hstr type lvc_title.
    data: tabname like DD02T-TABNAME.
       tabname = 'MARA'. " First Table
      create data itab_ref type standard table of (tabname).
      field-symbols: <itab> type standard table.
      assign itab_ref->* to <itab>.
      select * UP TO 10 ROWS from (tabname) into corresponding fields of table <itab>.
      perform showalv.
       tabname = 'KNA1'. " 2nd Table
      create data itab_ref type standard table of (tabname).
      "field-symbols: <itab> type standard table.
      assign itab_ref->* to <itab>.
      select * UP TO 10 ROWS from (tabname) into corresponding fields of table <itab>.
      perform showalv.
    form showalv.
    " to show that data in alv
      type-pools: slis.
      data: myalv type ref to cl_gui_alv_grid,    "ALV Grid
            fieldcat type slis_t_fieldcat_alv,    "Field Catalog Table
            ls_fcat type slis_fieldcat_alv,       "Line of Field catalog.
            ls_heading type slis_listheader,      "Line of Heading.
            layout type slis_layout_alv,          "layout of ALV for Heading and Logo.
            event type slis_t_event,              "Event Raising to Display Heading.
            event_str type slis_alv_event.        "Event String.
    type-pools: slis.
    data: heading type slis_t_listheader.       "List Heading.
      if heading[] is initial.
        ls_heading-typ = 'H'.
        ls_heading-info = 'HR: Master Data Change History'.
        append ls_heading to heading.
      endif.
    *  ls_heading-typ = 'A'.
    *  ls_heading-info = ''.
    *  APPEND ls_heading TO heading.
    *                          ALV DISPLAY                        *
    *******Making Layout of ALV
      layout-zebra = 'X'.
      layout-colwidth_optimize = 'X'.
    *Calling function to raise event to display heading and icon above ALV
      call function 'REUSE_ALV_EVENTS_GET'
       exporting
         i_list_type           = 0
       importing
         et_events             = event[]
    * EXCEPTIONS
    *   LIST_TYPE_WRONG       = 1
    *   OTHERS                = 2
      if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    ******calling TOP_OF_PAGE Event
      read table event with key name = 'TOP_OF_PAGE' into event_str.
      if sy-subrc = 0.
        move: 'TOP_OF_PAGE' to event_str-form.
        modify event from event_str index sy-tabix.
      endif.
    **** Now use this Fuction to display ALV without any Screen Programming.
      call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
    *   I_INTERFACE_CHECK                 = ' '
    *   I_BYPASSING_BUFFER                = ' '
    *   I_BUFFER_ACTIVE                   = ' '
         i_callback_program                = 'SAPLZFSL_HR_UTILS' "sy-cprog
    *   I_CALLBACK_PF_STATUS_SET          = ' '
    *   I_CALLBACK_USER_COMMAND           = ' '
    *   I_CALLBACK_TOP_OF_PAGE            = ' '
    *   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    *   I_CALLBACK_HTML_END_OF_LIST       = ' '
         i_structure_name                  = tabname
    *   I_BACKGROUND_ID                   = ' '
         i_grid_title                      = hstr   "Heading of ALV Grid.
    *   I_GRID_SETTINGS                   =
         is_layout                         = layout
    *   it_fieldcat                       = fieldcat[]
    *   IT_EXCLUDING                      =
    *   IT_SPECIAL_GROUPS                 =
    *   IT_SORT                           =
    *   IT_FILTER                         =
    *   IS_SEL_HIDE                       =
         i_default                         = 'X'
         i_save                            = 'X'
    *   IS_VARIANT                        =
         it_events                         = event[]
    *   IT_EVENT_EXIT                     =
    *   IS_PRINT                          =
    *   IS_REPREP_ID                      =
    *   I_SCREEN_START_COLUMN             = 0
    *   I_SCREEN_START_LINE               = 0
    *   I_SCREEN_END_COLUMN               = 0
    *   I_SCREEN_END_LINE                 = 0
    *   I_HTML_HEIGHT_TOP                 = 0
    *   I_HTML_HEIGHT_END                 = 0
    *   IT_ALV_GRAPHICS                   =
    *   IT_HYPERLINK                      =
    *   IT_ADD_FIELDCAT                   =
    *   IT_EXCEPT_QINFO                   =
    *   IR_SALV_FULLSCREEN_ADAPTER        =
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER           =
    *   ES_EXIT_CAUSED_BY_USER            =
        tables
          t_outtab                          = <itab>
    * EXCEPTIONS
    *   PROGRAM_ERROR                     = 1
    *   OTHERS                            = 2
      if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.

  • Add network object to access list

    Can someone please show me how to add existing network objects to existing access control lists in a network object group using the cli in the asa version 9.x on the inside interface? The source is an already existing network object and the destination is an existing network object group. Thanks.

    Hi,
    I am not entirely sure of what you are asking.
    What I undertood is that you have the following already
    An "access-list" that is attached to the "inside" interface
    An existing "object network " configured that will be used as the source for the "access-list" rule
    An existing "object-group network " configured that will be used as the destination for the "access-list" rule
    If the above is true then you would simply configure
    access-list permit ip object object-group
    The above though would permit all TCP/UDP traffic
    If you want to only allow specific ports for either TCP or UDP then you would use the format
    access-list permit tcp object object-group eq
    access-list permit udp object object-group eq
    Naturally if you want to allow multiple ports there would be further ways to group those ports together also inside "object-group" to make the configuration smaller/cleaner.
    Please let me know if you were looking for something else and I missunderstood
    Hope this helps
    - Jouni

  • Display Object list Button(Shift+F11) in Transaction code SE09

    I am Facing problem Due to version upgradation .
    Problem is
    I can See Display Object list Button(Shift+F11) in Transaction code SE09 of SAP4.6c.
    But i cant found it in Transaction code SE09 of ECC6.0.
    Could any buddy ans me where can i find that Button to display object list .
    Thank you in advance
    Deepak.

    Hi Deepak -
    By chance did you post this message to the wrong discussion forum?  This forum is for Financial Performance Management related products, most of which are not yet even based on SAP NetWeaver technology where transaction SE09 would be relevant.
    Your question seems more suitable to me in the SAP Software Logistics forum.
    <a class="jive_macro jive_macro_community" href="" __jive_macro_name="community" modifiedtitle="true" __default_attr="2149"></a>
    Please try to post there in hope of receiving a satisfactory answer.
    Best regards,
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP BusinessObjects
    Enterprise Performance Management
    Regional Implementation Group

  • List of obsolete objects and tables

    Hi,
    Can anyone give the list of obsolete objects and tables from 4.6c to ECC 6.0 upgrade. Also other upgrade issues and solutions faced for ECC 6.0 upgrade.
    Thanks in advance.

    You may have an overview wirth Solution Browser tool (at the solution point of view) in order to compare functionality between your current system and the ERP 2005.
    at:
    http://solutionbrowser.erp.sap.fmpmedia.com/
    You can get the detailed release information from the following link.
    http://service.sap.com/releasenotes.
    A release note is a brief explanation of new features or changes to the system since the last software release. A release note typically describes a new function or an existing function that has been enhanced or changed.
    I hope this helps.
    Reward Points If helpful
    Regards
    Nilesh

  • List UIBB - Access to cell editor for a certain table line possible

    Hi,
    I am looking for a way to access the cell editor of the last table line as I want to mark it as a special - summary - line.
    I intend a similar approach like in WebDynrpo ABAP when accessing the node info and modifying the "CELL DESIGN" attribute like in the following code (copied from WD Comp WDR_TEST_TABLE, View CELL DESIGN, method FILL_CELL_DESIGNS) :
      data tab type IF_CELL_DESIGN=>Elements_Cell_Designs.
      data line type IF_CELL_DESIGN=>Element_Cell_Designs.
      data node_info type ref to if_wd_context_node_info.
      data attribute_info type wdr_context_attribute_info.
      data attr_value type WDR_CONTEXT_ATTR_VALUE.
      node_info = node->get_node_info( ).
      attribute_info = node_info->get_attribute( 'CELL_DESIGN' ).
      line-is_expanded = abap_true.
      line-is_leaf     = abap_false.
      line-key         = 'FIRST'.
      loop at attribute_info-value_set into attr_value.
        line-text = sy-tabix.
        concatenate 'Text #' line-text into line-text. "#EC NOTEXT
        line-cell_design = attr_value-value.
        insert line into table tab.
        line-is_leaf = abap_true.
        line-key = attr_value-value.
        line-parent_key = 'FIRST'.
      endloop.
      node->bind_table( tab ).
    I suspect the method IF_FPM_GUIBB_LISTGET_DATA (or IF_FPM_GUIBB_LISTGET_DEFINITION) of my feeder class to be the right access point.
    But unfortunately, I have not yet found out how to change the cell design for specific lines, only for whole columns.
    Can anyone give me a hint here?
    BTW: The "summary" line is not a sum of the lines above, but determined by backend logic, so not ALV-summary line for me.
    Kind Regards

    Hi,
    A short update for all interested:
    My current work around is to always set the lead selection to the summary line. It does in a kind "mark" that line as special as long as I cannot mark it using a different cell design.
    How do I assure this?
    I have implemented the following code in a redefinition of the method ADJUST_SELECTION:
    *- alter selection
      DATA:
       ls_size TYPE rstabix.
      "get index of summary line
      ls_size-tabix = mo_collection->size( ).
      "change only if there are any cash conc. proposals
      IF ls_size-tabix > 0.
        "do FPM selection
        CLEAR: ev_lead_index, et_selection.
        ev_lead_index = ls_size-tabix.
        APPEND ls_size TO et_selection.
        "do BOL selection
        mo_collection->if_bol_bo_col_multi_sel~unmark_all( ).
        mo_collection->if_bol_bo_col_multi_sel~mark( iv_index = ls_size-tabix ).
      ENDIF.
    The general downside is, that no other selection is possible!
    The selection is always reset to the summary line with each roundtrip.
    Waiting for a better solution...
    Kind Regards,
    Robert

  • Accessing display object on the stage from another class

    I've googled this to no avail, I've only found how to manipulate the stage itself and not a display object on it, and I'm noob enough to not be able to figure it out from there. :/
    I have a movie clip on the main timeline with instance name displayName. I created a button that should change what frame displayName goes to (in order to...did you guess it?! diplay the Name of the button. Awesome. )
    So I am trying to write the code in a reusable fashion and have the buttons all linked to a class called GeoPuzzle. Inside GeoPuzzle I instantiate a touch event and run the code. However, the function has to be able to change displayName in the main part of the timeline and, of course, the compiler says displayName doesn't exist because I'm in a class and I'm talking about the stage.
    Here is the simplified code in the class:
    package  com.freerangeeggheads.puzzleography {
        import flash.display.MovieClip;
        import flash.events.TouchEvent;
        public class GeoPuzzle extends MovieClip {
            //declare variables
            public function setInitial (abbrev:String, fullName:String, isLocked:Boolean):void {
                //set parameters
                this.addEventListener(TouchEvent.TOUCH_BEGIN, geoTouchBeginHandler);
            public function GeoPuzzle (): void {
            public function geoTouchBeginHandler (e:TouchEvent): void {
                   e.target.addEventListener(TouchEvent.TOUCH_END, geoTouchEndHandler);
                   //some other methods
                   nameDisplay.gotoAndStop(e.target.abbrev);
            public function geoTouchEndHandler (e:TouchEvent): void {
                //some other methods
               nameDisplay.gotoAndStop("USA");
    The lines in bold are my problem. Now this code doesn't actually execute as is so if you see an error in it, yeah, I have no idea what the problem is, but it DID execute before and these lines still gave me trouble so I'm trying to troubleshoot on multiple fronts.
    How can I tell displayName to change it's current frame from within display object class?
    Thanks!

    if displayName is a GeoPuzzle instance, use:
    package  com.freerangeeggheads.puzzleography {
        import flash.display.MovieClip;
        import flash.events.TouchEvent;
        public class GeoPuzzle extends MovieClip {
            //declare variables
            public function setInitial (abbrev:String, fullName:String, isLocked:Boolean):void {
                //set parameters
                this.addEventListener(TouchEvent.TOUCH_BEGIN, geoTouchBeginHandler);
            public function GeoPuzzle (): void {
            public function geoTouchBeginHandler (e:TouchEvent): void {
                   e.target.addEventListener(TouchEvent.TOUCH_END, geoTouchEndHandler);
                   //some other methods
                   this.gotoAndStop(this.abbrev);
            public function geoTouchEndHandler (e:TouchEvent): void {
                //some other methods
               this.gotoAndStop("USA");

  • Is there a way to detect redraw regions or at the very least when a display object is redrawn?

    I have a layered window system that produces Windows 7 Aero Glass effect in Flash.
    It consists of nested display objects, with overlays as so.
    Root [
        GlassWindowTop [
           RenderedEffectBackground
         BackgroundForGlassWindowTop [
             GlassWindowMiddle [
               RenderedEffectBackground
            BackgroundForGlassWindowMiddle [
                 GlassWindowBottom [
                    RenderedEffectBackground
                 BackgroundForGlassWindowBottom (e.g. the DesktopBackground)
    Windows can be raised and lowered by changing their order in the hierarchy and adding new levels.
    Each glass window has a designated background (containing all lower windows) .  It draws to an off-screen Bitmap the region of the background that is under the window, and applies a blur filter, tint, and parallax effects to it, and then displays that as it's own background as RenderedEffectBackground.
    The problem is that "RenderedEffectBackground" is a static rendering of the window background, so in order to update it in real time, I need to detect when it's background display object (e.g. BackgroudnForGlassWindowTop) or any nested display objects are rendered.
    I could simply update all RenderedEffectBackgrounds from the bottom up each frame, but that would be inefficient.   Ideally, I could detect when a particular background changes (e.g. when a textfield cursor is flashing, or a MovieClip changes frames), and then only render from that object up.  The rendering of course always has to take place from back to front, starting with the lowest window that has changed.  If I could detect the redraw regions of the Flash Player (e.g. when a textfield cursor is flashing, or a MovieClip is playing), I could optimize this system even further by checking for layer overlaps and only rendering layers whose windows intersect the redraw regions, but obtaining that level of information would probably not be possible or logical since this this essentially needs to happen during some kind of pre render phase, which Flash may not support.  Such a pre-render phase would itself be causing new redraw regions, but as long as it is processed from the bottom up, it could work.
    Is there any AS3 function of the flash player that allows my code to obtain information about the display list as far as which display objects are due to be rendered, and then intercept some kind of "onRenderComplete" event for them right before rendering takes place so that I can render the higher display objects.
    I originally tried to implement this as a filter, but pixel bender shaders in AS3 don't seem to allow sampling of an underlying object that would allow for blurring (i.e. the shader can access only the current point being rendered, coordinates passed to the sampling methods are ignored (this is documented behavior).
    Any ideas?

    The feature that shows the link you are mousing over hasn't been removed in 29. Maybe the add-on you are using to restore the add-on bar is covering it. I've tested the Classic Theme Restorer and it seems to work correctly in this situation - https://addons.mozilla.org/firefox/addon/classicthemerestorer/

  • How to get list of custom objects used in abap report program?

    Hi friends,
    I have a requirement in which I have to scan the entire abap report and retrieve list of custom objects used in it for example custom tables, data elements, structures, table types etc,. Is there any provision in SAP like fuction modules to do this functionality?  As of now I am coding everything manually where so many possibilities are there for all kinds of objects. Provide your answers and suggestions...
    Thanks,
    Nastera

    Hi,
    The best way to do this is environment analysis. Follow the steps:
    1. Open se38, type in the program name (don't click on on display/change or create button, stay on first screen only)
    2. Click on environment analysis button (hot key SHIFT+F4)
    3. It will throw a pop-up, which will ask for type of object you want to see, which are linked /used by this program. select all (or may be if you are only interested in Tables, then select table only)
    4. Hit 'Enter'
    You will get the full list of all objects used in this report program. Just note down the one which starts with Z or Y and that's it.
    Cheers,
    Anid

  • Object ID and Object ID Version fields in Displaying Object Properties - XI

    Hi,
    In displaying Object Properties in XI we can see different fields like Type, Description, SCV, Object ID, Object ID Version, Status, Person Responsible, Changed On, Changed By, Display Language, Original Language.
    But when i refer to the SAP Library documentation for these fields, Object ID and Object ID Version are not included. Here is the link for the documentation
    http://help.sap.com/saphelp_nw04/helpdata/en/f0/fc9a3de2ec0753e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/f0/fc9a3de2ec0753e10000000a114084/frameset.htm
    With that said, i have no information on those two fields, only assumptions i've made that i would like to verify in this forum with the questions below
    1.
    Please correct me if i'm wrong, the Object ID is the unique identifier for the object and the Object ID Version is directly connected with the versioning concept for IR and ID, so the Object ID is generated when you create the object  (e.g. MM) and the Object ID Version changes every time that object is edited and change list activated for it. Is this correct?
    Or does the Object ID change every time the object is edited and change list activated for it?
    What is the behavior of these two fields when transported? e.g. dev to qa...  are they both retained on the target IB's?  (specifically for ID objects because the change list needs to be activated first on the target ID)
    2.
    Does any one know where the Object ID and Object ID Version gets stored?  (saved on a table in the ABAP stack or saved somewhere in the Java stack? e.g. can be viewed in Visual Admin or a URL)  I am thinking of extracting all the XI objects with their corresponding Object ID and Object ID Version (per system) in one step.  I know this is possible only if the Object ID & Object ID Version are stored in an ABAP table...
    Kindly give me some inputs.
    Please answer directly with the questions above. I will reward points for it.
    Thanks in advance.

    HI,
    >Please correct me if i'm wrong, the Object ID is the unique identifier for the object and the Object ID Version is directly connected with the versioning concept for IR and ID, so the Object ID is generated when you create the object (e.g. MM) and the Object ID Version changes every time that object is edited and change list activated for it. Is this correct?
    The Object Id is created the first time you create the object.
    Object Version Id is created the first time you save/activate a object.
    Now suppose if you modify the object a new Object Version Id will be created but the Object ID will remain the same.
    For IR Objects the Object Id & Object Version ID will remain the same across systems.
    For ID Objects the Object Id & Object Version ID is not the same across systems.
    Not sure about the table. Can you try in SE11 and check all tables with SXMS*. Could be also that tables might not be available from GUI i.e you might have to login to DB to find out.
    Regards,
    Sumit

  • Get hierarchal list of business objects

    Hi,
      I'm using SWO_QUERY_OBJTYPES to get a list of business objects, but I need to display a hierarchy similar to the BAPI explorer. What business object can I use to browse business objects? If no business object is available, what function calls are available to get at the data?

    Hi Chris,
    this is an excerpt from the SDK Help file.
    It works on other object too, of course.
    Private Sub DataBrowserOperations()
        '// A Data Browser object can not be created, it is invoked
        '// as a property of a business object.
        '// The BusinessPartners object is used to demonstrate the
        '// use of a DataBrowser object
        Dim BusinessPartners As SAPbobsCOM.BusinessPartners
        '// A DataBrowser object contains a Recordset object.
        '// Because a DataBrowser Object can not be created,
        '// a Recordset Object should be created and then assigned
        '// (linked) to the Recordset Property of the DataBrowser
        Dim oRecordSet As SAPbobsCOM.Recordset
        '// Get a new BusinessPartners object
        Set BusinessPartners = oCompany.GetBusinessObject(oBusinessPartners)
        '// Get a new Recordset object
        Set oRecordSet = oCompany.GetBusinessObject(BoRecordset)
        '// Perform the SELECT statement.
        '// The query result will be loaded
        '// into the Recordset object
        oRecordSet.DoQuery ("Select cardcode from ocrd where cardtype = 'C'")
        '// Asign (link) the Recordset object
        '// to the Browser.Recordset property
        BusinessPartners.Browser.Recordset = oRecordSet
        '// Access the data
        '// Once the Browser points to a row in the
        '// result set you can use the properties directly
        BusinessPartners.CardCode
        BusinessPartners.CardName
        '//Get the next Business Partner
        If BusinessPartners.Browser.EOF = False Then
            BusinessPartners.Browser.MoveNext
        End If
        '//Get the previous Business Partner
        If BusinessPartners.Browser.BoF = False Then
            BusinessPartners.Browser.MovePrevious
        End If
    End Sub

  • Dynamic select list with displaying a description

    Hi,
    I want to have a select List, my list refer to a lov, and the lov refer to a table contaning 2 columns : code and description,
    The list must display only the code, but I want having an item beside the list dispaling the description....
    I have used a select list with the query :
    select code d, code r from prog_theme order by 1 desc
    and Now : what is the way for displaying the description
    Thanks!!
    Lila

    Ok, here goes the top down approach...
    In the HTML header of my page, i have this reference to a js file containing the javascript - <script src="#WORKSPACE_IMAGES#108.js" type="text/javascript"></script>
    Then in an HTML Region I have the following code to create the divs that will be shown and hidden - <div id="divREGION" class="divs">Select region to get list of countries.</div>
    <div id="divCOUNTRY" class="divs">Select country to get list of cities.</div>
    <div id="divCITY" class="divs">Select city and then press "Get Employees". </div>
    Note that these divs contain static content. You may be able to create dynamic content for these divs by creating dynamic query regions and putting div tags around the region (i havent tried this, it may require template modification).
    The select boxes have this code in the "HTML form elements attributes" - onFocus="javascript:showHideDiv(this,true)" onBlur="javascript:showHideDiv(this,false)"
    This onFocus and onBlur call the showHideDiv() function, passing in the object reference of the select box and a true/false to show/hide the related div.
    The actual javascript function that is contained in the 108.js file is:
    function showHideDiv(objThis, inBool){
         var divid = "div" + objThis.id.substring(3);
         if (inBool) {
         ShowDiv(divid);
         else {
    HideDiv(divid);
    That function in turn calls either the ShowDiv() or HideDiv() functions, depending on the true or false, passing in the ID of the div to be changed...
    function ShowDiv(divid){
         eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "inline"');
    function HideDiv(divid){
         eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "none"');
    Hope this helps.

Maybe you are looking for