Account credit not updated

My monthly credit minutes run out and it should has been updated on the 03/03. Today is the 05/03 and I still not able to use it.

Hi Gino Marien,
It takes approximately 48 hours for an Adobe product to get confirmed.
I hope now you are using this service hassle free.
Regards,
Florence

Similar Messages

  • Financial document - Letter of credit not updated

    Hi ,
    The financial document ( LC) open value is not updated in vx13n after the PGI  and billing even though accounting document is generated in both the cases.
    We have assigned the financial document at the item level in the sales order.
    Aslo we have tried the cycle where i have assigned the LC in header details .
    In both the cases its not getting updated .
    Can you please guide how can it can be done .

    Got solution.
    updated settings in the credit limit check. Automatic credit check with routing updated in the config. now open values are updating in the fin.documents

  • Reconcilation Accounts are not updating in KE80 PCA-Report

    Hi,
    i have executed all balance carry forward to PCA transactions,Still the reconcilation accounts balances are not updating in the KE80-PCA report.I have maintained all reconcilation accounts in 3KEH transaction.Is this the reason,to not update the reconcilation balances in the PCA report?
    Kindly advice me
    Thanks
    Supriya

    Hello,
    There is no need to maintain the reconciliation accounts in 3KEH.
    You only need to maintain the additional balance sheet accounts in 3KEH.
    If you further interested to determine on various level, you can write the PCA determination in 3KEI
    Please remove reconciliation accounts from 3KEH.
    Execute F.5D (Balance Sheet Adjustment)
    Execure 1KEH, 1KEK, 1KEI and 1KEJ reports. (Make sure that you have removed test runs)
    Useful transaction code is KE5T, where you can see the difference between FI and PCA
    Regards,
    Ravi

  • Accounting Document not updated after Vf01(billing)

    Hi Gurus,
    After creating invoice in vf01 when i m looking at accounting document, then my value is updated but the quantity is not updated in fb02.
    when i see table BSEG then the value of MENGE is not updated there.
    It is always coming ZERO.
    Thanks in advance

    Hi
    Please check whether FI doculments summarisation is active for this field under procedure VBRK.
    Regards

  • A/R Credit note update error

    Hi Export,
    I make one A/R Credit Note after that i want to attach same document with this A/R Credit note but system error is showing
    Invalid value [A/R Credit Memo-reopen origin. order by return] [message 439-173]
    Please suggest what is the reason.
    Error screen short attached.
    Regards
    Mukesh Singh

    Yes sir after adding the A/R Credit Note, i want to attached PDF document with A/R Credit Note and click on update then below error is showing
    Invalid value [A/R Credit Memo-reopen origin. order by return] [message 439-173]
    Regards
    Mukesh Singh

  • Alternative account number not updated correctly

    Hi,
    we are using a substitution to change the accounts used in foreign currency revaluation to meet legal requirements in Turkey (according to set-up instructions by SAP Turkey).
    The substitution works correctly, but the problem is that the alternative account is not adapted accordingly. It still shows the alternative account of the original account, and not the one from the substituted account.
    So BSEG-HKONT is replaced, but BSEG-ALTKT still contains the original value.
    Any help would be greatly appreciated
    Best  regards
    Sven

    HI
    I think your substitution rule has created only for GL account. So you need to update you rule with Alternative account assignment field also in your substitution. So instead of creating substitution rule on one single field for this scenario you can go for user exit option in substitution. Once you accomodate the HKONT and ALTKT in one rule system will give you the right values
    Reg
    Vishnu

  • My account has not updated new prepaid account

    opened a new Prepaid mobile added to my account which has not happened also had alot of trouble rechargeing with Voucher because the my account was not showing after number of phone calls to Telstra and being told by robot can't do that ring this number same answer rang again and used a different answer got through to overseas call centre very nice but had np idea what i wanted recharge my prepaid finally someone worked out to recharge with voucher.My problem now is my account still has not updated so I can recharge more when needed???

    Hi shooterau,Try phoning Pre Paid on 1258880 and asking for technical support. 

  • Skype credit not updated.

    Skype Id (removed) parchased credit online recieved confirmation from my bank as well as skype but the amt not updated in my skype ID. Appreciate your early response.

    I'm not sure if I have posted this in the correct section and I'm not sure if anybody is concerned with my issue. I've been looking for a customer service number such that I can talk to someone, but there's none available. My credit card has been charged, the email says order delivered, but balance is not updated. Anybody please point me to the right direction? Need to resolve this ASAP.

  • Accounting Document not updated in BKPF for JV by J1IH

    Hi
    The user posted JV through transaction code J1IH.
    The document number is updated in table J_1IPART2 but when the user is trying to see the same document in FB03 we are getting the error message as "the document is not exist or not archived".
    And we have checked in tables BKPF and BSEG we did not find this document.
    Can anyone please suggest how to find the reason why the system is not updated this document?
    Regards
    RS

    Hi Hari,
    Thanks for your reply. I have checked in this transaction code also. The system is showing the message as "The document is already posted".
    But it is not updated any tables except the document number is updated in table  J_1IPART2.
    Is there any other reasons for not updating the tables.
    Regards
    RS

  • GL account field Not Updated in Special Purpose ledger

    Hi Experts,
    We are using 4.7 Version in which we found difference in particular Month difference between FS10N and GD13 and GD20 Line Items of Particular Leder.
    We Observed that the Documents are posted but , without being updating the GL Account field column. GL account field column is Blank and Hence it has not been carryforward to Subsequent years.
    Our Questions
    1) How It had happened,  becase all the documents are updated except the 2 documents .
    2) Is there any way to update GL account field in the Mentioned Documents.
    3) Or do we need to Reverse the document and post again. 
    How to proceed on this issue.
    regards
    N.Kumar

    I cannot answer question 1 but I can shed some light on the following ones.
    There are methods to identify and correct Special Ledger document inconsistencies. Usually when I have SPL inconsistencies (such as a blank fund in the SPL document), It is caught quickly and I take the action to reverse the source document and re-post again. That would be my suggestion to follow if at all possible for your two documents.
    If you take a look at notes 764523 and 697068, you will see the reports used to analyze and correct the inconsistencies. Read the notes thoroughly and look at report RGUREP13 in particular.
    If your issue is re-occurring then you should get SAP to look into the matter via OSS and perhaps they could determine the cause.

  • Group Membership under Settings/My Account is not updating

    We use an External table for User permissions/Groups to get updated in Group Membership.
    We use our custom tool to create/update new/existing users with the permissions. Then our ETL picks up the changes from the OLTP tables and update User Permission table in our DWH hourly. Now let me explain the present situation. User ABC is an existing user and never used our Report Portal before, we updated ABC user with all the necessary groups to use Report portal and with curiosity she didn't wait until Hourly ETL run and she didn't had the necessary permissions to run any reports in Report portal. But when she login after 1hr/10 hr/ 1 day/2 day, the user won't see the Permissions getting updated in Group Membership. If we check the User permission table in DWH, it is updated with all the new roles, but it is never being updated in 'My Account' Answers. I think this is some kind of Presentation Cache issue, but I did clicked "Reload Files and Metadata" under Settings and "Close All Cursors" under Settings/Manage Sessions. You may also say it may be with the Caching on Initialization Block for the User Permission table, but we did Un-check the 'Use Caching' right below the Row-wise initialization for the corresponding Initialization block. We has 3 users with the same issue now. But when the user waits for certain time (for at least 1hr), and when they login after the actual hourly ETL ran, they were able to get in and use Report Portal without any issue. So, I am kind of sure this is something with CACHING and I might be missing some thing on Clearing this type of Cache. Could someone please help me out on this? This is in PRD and we are not able to find a solution. Any help would be appreciated!
    -Dinesh

    Yes, we are using Initialization Blocks to update the User Groups. Our USER_PERMISSION table has Login, Company_ID, Roles, etc columns in it. The Initialization Block will query on this Table and the query has a where clause in it and the Where clause "where company_id=(select substr(':USER', 0, (instr(':USER', '.')) - 1) from dual) and upper(login)=upper((select substr(':USER', (instr(':USER', '.')) + 1) from dual))) and dw_delete_date is null" from which it will get the roles for each user. And YES, the Caching is turned off for this initialization block.
    And I should try deleting the user folders, but my company has a very strict policy so I should do that in DEv, then QA and in PRD. Hope this works, but I am still not convinced why this is happening. We cannot keep on deleting the user folders in future if this happens again.

  • Account assignment not updated in SRM's shopping cart when changes are made in ERP's PO - Classic Scenario

    Hello!
    A customer has classic scenario and creates shopping carts using only cost center as account assignments in SRM.
    When the PO is created in ERP's backend, sometimes a purchaser changes the account assignment to Asset("A").
    The account assignment changed in ERP is not reflecting in the shopping cart and the result is that the requester can not make a goods receipt in SRM because the account assignment does not match the PO.
    Does anybody knows what shall be done so the account assignment in SRM is updated according to ERP?
    Shall I use BBP_DOC_CHANGE_BADI?
    Thanks in advance!
    Best regards,
    Karin

    Hi Karin,
    As Mithun rightly said, the changes made to the PO will not be reflected in the SC not just in Classic but in Extended Classic Scenario as well.
    We create a Confirmation against a PO and not against SC, so it is not necessary that the SC needs to be updated.
    Is the system allowing the creation of the Confirmation or is the error coming up when the confirmation is being posted on the backend system?
    Can you check the SLG1 in SRM for the error that it is triggering when the PO is changed?
    Regards

  • Account balance not updated

    I was charged for a new month of subscription and the order shows 'delivered' status but my account balance for number of minutes left shows I have only 30 minutes left when it should be 60 minutes even after 2 days after my order was delivered.  How do I get Skype to correct this?  if not, my skype credit will start to be charged even though I'm suppose to have minutes left in my subscription.

    Hello,
    Please note that the recurring payment is taken three days in advance of your subscription expiring, to ensure prompt delivery of your subscription.The first time you have purchased the Subscription was on the 16th of January so your Subscription will be renewed next time tomorrow
    Find out more about subscriptions: https://support.skype.com/faq/FA10414
    If my answer was useful, please click on "Accept as Solution" to help others, thank you
    Si ma réponse vous a aidé merci de cliquer sur "Accepter comme solution"
    Cela pourra surement aider d'autres personnes qui ont le même problème

  • Credit not updated

    Hello everyone, Merry Xmas !
    So, as you all know today is Xmas and because of that I have spent all my 520 minutes credit subscription by 22nd December 2012. My subscription is to call landline in Brazil from U.K , however on 24th I should be acredited with my new minutes allowance as Skype has already taken the yearly payment from my account on 22nd December ( same day my credits has finished), and the message I get displayed on my profile is that I need to buy more credits when I already have paid for my next year subscription which starts on 24 th December ( yesterday ) . Also it's says on my profile that my new credits is due to renew on 24th when it's already 25th and nothing has been changed and I'm still waiting ... Any help is much appreciated ! Thank you .

    Got solution.
    updated settings in the credit limit check. Automatic credit check with routing updated in the config. now open values are updating in the fin.documents

  • My email accounts are not updating on my iPad mini.  Wifi is connected, my iPhone is getting email.  Tried rebooting x2.  Just states was updated yesterday.

    not able to get IPad mini to update email accounts.  Wifi is connected, have rebooted.  Mail is coming through on iPhone 5.

    It could be the network, but what surprises me is that nothing else is being blocked at all. And I can't seem to change the port that Mail is on. I tried a port scan, and it came up that that port is blocked (993), but it also came up that every other port I tried was also blocked. I used a Mac to do a Port Scan for my iPad's IP, but it wasn't detecting any open ports. So I don't know if it is an issue with the network, or perhaps with my iOS devices. The network has 802.1X security I believe (I need a username and password to login), so unsure if this would affect it at all?

Maybe you are looking for